TRICKLESTAR TS1909 ZigBee TAV-Link Multi-Sensor User Manual DS TS1811 5 Jan 2016

Download:
Mirror Download [FCC.gov]
Document ID	2898536
Application ID	Wee338IEzIQy+NZ370f7SQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	208.54kB (2606788 bits)
Date Submitted	2016-02-05 00:00:00
Date Available	2016-02-09 00:00:00
Creation Date	2016-01-25 08:51:08
Producing Software	Adobe PDF library 9.90
Document Lastmod	2016-01-28 11:44:51
Document Title	DS TS1811_5 Jan 2016
Document Creator	Adobe Illustrator CS5

TIER 2 ZIGBEE MULTI-SENSOR
ADVANCED POWERSTRIP+
TS1811
7 OUTLET TIER 2 ADVANCED POWERSTRIP+
ZIGBEE® MULTI-SENSOR
Premium quality, fireproof surge protection that reduces standby and active power waste from electronics
OVERVIEW
KEY FEATURES
The Tier 2 ZigBee® Multi-Sensor Advanced PowerStrip+ (APS+)
provides premium quality surge protection and reduces the amount
of standby and active power wasted by electronics.
The APS+ is designed for use with set-top box systems.
The APS+ includes a low voltage RJ11 port which supports the
connection of a Zigbee®-enabled multi-sensor that senses radio
frequency (RF), infrared (IR), and motion.
The APS+ includes advanced power measurement and patented
auto-threshold detection. This allows the APS to accurately support
all types of televisions from old to new high efficiency types. It
provides automation to reduce wasteful standby and active power,
and it is suitable for TV/home theater applications.
In addition to standard power switching, the APS+ also supports “soft
switching” via high-level CEC commands from the multi-sensor to an
HDMI port on the TV; this feature is known as TAV-Link and will result
in placement of connected HDMI devices into a power-saving state
by high-level commands.
7 Outlets
2 Always On Outlets (1 outlet transformer spaced)
5 Switched Outlets (1 outlet transformer spaced)
15A resettable circuit breaker
Auto threshold detection
Intelligently adjusts to new equipment
True RMS power sensing
72,000 Amps/1080 Joules
Ceramic surge protection
Low-voltage, optically-isolated RJ11 input
LED status indication (ground, surge status, switched)
<40dB noice filtering
Angled space saver plug
ZigBee enabled multi-sensor
CEC TAV-Link function
FIREPROOF SURGE PROTECTION
Traditional surge suppression products use standard MOV (metal oxide
varistor) components. TrickleStar Tier 2 APS+ incorporates advanced
surge protection technology. The MOVs are encased in ceramic and
are capable of suppressing more energy and dissipating heat faster
than traditional MOVs. More importantly, the ceramic casing is fireproof
and therefore is capable of preventing fire during surge conditions.
PRODUCT WARRANTY
10-year product warranty
$20,000 connected equipment warranty
TM
The best way to save energy is to stop wasting it.
www.tricklestar.com
TIER 2 ZIGBEE® MULTI-SENSOR
ADVANCED POWERSTRIP+
PAIRING DirecTV® or Comcast®
REMOTE CONTROL
ZIGBEE® MULTI-SENSOR
STEP 1
Detects ZigBee RF4CE* RF, IR remote control signals and motion.
Includes a configurable countdown timer that will switch off the
TV and peripherals if no RF, IR or motion is detected.
Quickly press the pinhole pairing button
located on the back of the multi-sensor to
trigger the pairing process.
Status LED flashes when RF, IR or motion is detected.
A blue LED will flash for a period of 15
seconds - indicating the multi-sensor is in
pairing mode.
Patented sensing hardware and algorithm looks for RF and IR
commands first. It then looks for motion after a period where no
RF or IR commands are detected.
STEP 2
Supports high level CEC* commands via TAV-Link cable to the TV
and to the peripherals for soft switch off.
Place the RF4CE DirecTV or Comcast remote
near the sensor (within two inches) and press
the 0 key on the remote until the red LED
illuminates. Repeat with other RF4CE remote
controls (up to four).
TAV-Link functionality allows “smart” TVs to store their data and
settings safely before powering down. TAV-Link also allows
gaming consoles to enter an energy-saving mode earlier and
without any corruption of data.
The multi-sensor will exit pairing mode after
15 seconds if no RF button presses are
detected.
Supports RF4CE pairing with DirecTV® and Comcast® remote
controls (can pair up to 4 remotes).
Includes a soft chirp, piezo buzzer to warn of a pending shutdown
10 minutes prior to shutdown.
Manual on/off button.
*CEC (Consumer Electronics Control) is the control protocol found in HDMI.
APPLICATION DIAGRAM
Programming the
Countdown Timer
*RF4CE (Radio Frequency for Consumer Electronics) is a radio frequency
protocol for audio and video device remote controls. It provides two-way,
high-speed communications which allow remote signals to transmit
through cabinets, obstacles, walls and floors.
ZIGBEE RF, IR,
& MOTION
MULTI-SENSOR
TAV-LINK
(for CEC function)
RF + IR
TV REMOTE
To configure the countdown timer, press
and hold the button for 10 seconds until
the red LED illuminates. Then press:
• Once for 30 minutes
• Twice for 60 minutes
• Three times for 120 minutes
consoles without hard disk drives (HDD) should be
* Game
plugged into a switched outlet. Those with hard disk drives can
be plugged into an always-on outlet and controlled via
TAV-Link.
LED will flash once for 30 minutes, twice
for 60 minutes (default setting) and three
times for 120 minutes.
TM
The best way to save energy is to stop wasting it.
www.tricklestar.com
TIER 2 ZIGBEE® MULTI-SENSOR
ADVANCED POWERSTRIP+
ELECTRICAL SPECIFICATIONS
PIR & IR DETECTION PATTERN
TIER 2 APS+
SENSOR OPTICAL VIEW PATTERN
FOR INDOOR USE
Operating Voltage
Output Current
Maximum Total Load
Noise Filtering
Power Consumption
16.40 ft. 13.12 ft. 9.84 ft. 6.56 ft. 3.28 ft.
19.69 ft.
120 VAC +/- 10% 60Hz
15 Amps RMS
1800W
<40dB
<1W at 120VAC, 60Hz
(in all modes of operation)
RJ11
APS+ Cord Length
Outlets (7 Outlets)
3.3V & Optically Isolated
4 ft. (1.2 meters)
2 Always ON
3.28 ft. 6.56 ft. 9.84 ft. 13.12 ft. 16.40 ft.
19.69 ft.
16.40 ft.
16.40 ft.
13.12 ft.
13.12 ft.
9.84 ft.
9.84 ft.
6.56 ft.
6.56 ft.
3.28 ft.
3.28 ft.
(1 outlet transformer spaced)
3.28 ft.
3.28 ft.
6.56 ft.
6.56 ft.
9.84 ft.
9.84 ft.
13.12 ft.
13.12 ft.
16.40 ft.
16.40 ft.
19.69 ft.
19.69 ft.
5 Switched Outlets
(1 outlet transformer spaced)
LED Status Indication
Surge Protection
Input Current
Ground, Surge, Switched
72,000 Amps / 1080 Joules for all
outlets (Ceramic Surge Protection)
15A Resettable Circuit Breaker
RF Detection
Range: 16.4 ft.
Degree: 360°
MULTI SENSOR
FOR INDOOR USE
Voltage
IR Detection Angle/Range
PIR Detection Angle/Range
RF Detection Range
Cord Length
Sensor Detection
3.3V
60°/Up to 16.4 ft. (5 meters)
90°/Up to 16.4 ft. (5 meters)
360°/Up 16.4 ft. (5 meters)
8 ft.
Infrared, Passive Infrared
and ZigBee RF4CE
PHYSICAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Humidity
IP Rating
IR Detection
Range: 16.4 ft.
Degree: 60°
PIR Detection
Range: 16.4 ft.
Degree: 90°
APPROVALS
Conformity to product standards for safety and EMC
UL (US & Canada), 2002/95/EG (RoHs), 2002/96/EC (WEEE),
1999/5/EC (RTTE), FCC Approved, ZigBee Certified
ORDER INFORMATION
TS1811
7 Outlet APS+, 1080 Joules,
4 ft. Cord, Auto Threshold,
Zigbee Multi-Sensor, TAV-Link
32° to 113° F
14° to 140° F
5 to 90% N/C
IP20
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void
your authority to operate the equipment.
Copyright © TrickleStar. All rights reserved.
TrickleStar® is a registered trademarks of TrickleStar Ltd. All other trademarks are the property of their respective owners. The information in this document is subject to change without notice.
TrickleStar assumes no responsibility for any errors that may appear in this document.
REV 5 Jan 2016
TM
The best way to save energy is to stop wasting it.
www.tricklestar.com
®
Quick Start Guide &
Instruction Manual
®
PRODUCT INFORMATION
Copyright© TrickleStar LLC 2016. All rights reserved.
TrickleStar® is a registered trademark of TrickleStar Ltd. All other trademarks are the
property of their respective owners. The information in this document is subject to
change without notice.TrickleStar assumes no responsibility for any errors that may
appear in this document.
For technical support
go to www.tricklestar.com
or call 1-888-700-1098
TS1811
7 Outlet Advanced PowerStrip+,
1080 Joules, 4 ft. Cord, Auto Threshold,
Zigbee Multi-Sensor, TAV-Link
www.tricklestar.com
Product Warranty
Installation
The Lifetime of the Product is 10 years (hereafter referred to as Product Lifetime).
TrickleStar warrants to the original purchaser that for the Product Lifetime, it shall be free
of defects in design, assembly, material, or workmanship, and will repair or replace, at its
option, any defective product free of charge.
CONNECTED DEVICE WARRANTY
TrickleStar will repair or replace, at its option, any devices which are damaged by a
transient voltage surge/spike or lightning strike, (an “Occurrence”), while properly
connected through the Product to a properly wired AC power line with protective
grounding.
If applicable; the telephone line, and/or network line must be properly connected and
installed, and the antenna cable line must also be properly connected and installed, as
determined by TrickleStar at its sole discretion.
Programming the
ThisCountdown
Connected DeviceTimer
Warranty is a Limited Warranty, subject to the limitations and
TAV-LINK
exclusions set forth herein. TrickleStar will repair or replace
the damaged connected
(for CEC function)
devices, at TrickleStar’s option, an amount equal to the fair market value of the damaged
devices or the original purchase price of the devices, whichever is less, up to the maximum
of: $20,000
The fair market value of the devices shall be the current value of the devices specified in
the most recent edition of the Orion Blue Book by Orion Research Corporation, Roger
Rohrs Publisher.
IR AND RF
TrickleStar reserves the right to review the damaged Product, the damaged devices, and
TV REMOTE
the site where the damage occurred. All costs of shipping the Product and the damaged
devices to TrickleStar for inspection shall be borne solely by the purchaser. TrickleStar
reserves the right to negotiate the cost of repairs. If TrickleStar determines, in its sole
discretion, that it is impractical to ship the damaged devices to TrickleStar, TrickleStar may
designate,
in its sole
discretion, atimer,
repairpress
facility to inspect and estimate the cost to repair
To configure
the countdown
such
devices.
Thebutton
cost, iffor
any,
shippinguntil
the devices to and from such repair facility and
and
hold the
10ofseconds
of such
estimate
shall be borne
solely
by the purchaser.
the red
LED illuminates.
Then
press:
• Once for 30 minutes
Damaged
must remain available for inspection until the claim is finalized.
• Twicedevices
for 60 minutes
Whenever claims are settled, TrickleStar reserves the right to be subrogated under any
• Three times for 120 minutes
existing insurance policies the claimant may have. All above warranties are null and void
if:
LED will flash once for 30 minutes, twice
• The Product in use during the occurrence is not provided to TrickleStar for inspection
for
60 TrickleStar
minutes (default
setting)
upon
’s request
at theand
solethree
expense of the purchaser.
for 120
minutes.that the Product has not been installed in accordance with the
• times
TrickleStar
determines
Installation Requirements, altered in any way or tampered with.
• TrickleStar determines that the damage did not result from the occurrence or that no
occurrence in fact took place, the repair or replacement of the damaged devices is
covered under a manufacturer’s warranty.
• TrickleStar determines that the connected devices were not used under normal
operating conditions or in accordance with any labels or instructions.
• The Product is not plugged directly into a receptacle.
• The Product is “daisy-chained” together in serial fashion with other power boards,
UPS’, other surge protectors or extension cords.
• A three-to two-prong adapter is used.
• The Product is not used indoors.
www.tricklestar.com
www.tricklestar.com
7 Advanced
Outlet
PowerStrip+
This Product is not for use with aquariums and all other water-related products. Use only
indoors and in dry locations. The Connected Device Warranty only protects against
damage to properly connected devices where TrickleStar has determined, in its sole
discretion, that the damage resulted from an occurrence, and does not protect against acts
of God (other than lightning) such as flood, earthquake, war, vandalism, theft, normal-use
wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage
disturbances (i.e. brownouts or sags), non-authorized program, or system devices
modification or alteration. This warranty contains the sole warranty of TrickleStar, there are
no other warranties, expressed or, except as required by law, implied, including the implied
warranty RF
or condition
of quality, merchantability or fitness for a particular purpose, and
+ IR + MOTION
such implied
warranties, if any, are limited in duration to the term of this warranty. Some
+ DIRECTV
states doMULTI-SENSOR
not allow limitations on how long an implied warranty lasts, so the above
limitations may not apply to you.
In no event shall TrickleStar be liable for incidental, special, direct, indirect, consequential
or multiple damages such as, but not limited to, lost business or profits arising out of the
sale or use of any Product, even if advised of the possibility of such damages. This
warranty gives you specific legal rights, and you may also have other rights, which may
vary from state to state. Some states do not allow the exclusion or limitation of incidental
or consequential damage, so the above limitations may not apply to you.
This warranty is valid only for the original purchaser of the product. All damage claims
against the product must be made within 15 days from the date of the occurrence and
must be accompanied by a receipt for the damaged devices or the warranty is void.
Warranty is valid in USA and Canada.
MAKING A WARRANTY CLAIM
Go to: www.tricklestar.com
warranty@tricklestar.com
and
print
our
claim
form
and
email
it
to
Provide the following information:
• Product part number
• A list of the devices that were connected to the Product at the time of the
occurrence
• A list of the devices that were damaged during the occurrence and the extent of the
Game consoles without hard drives are recommended to be
damage
into a switched outlet.
• The dateplugged
of the occurrence
Those
with hard
can be plugged into an always on outlet
• Where you
purchased
thedrives
Product
andpurchased
controlled
TAV-LINK
• When you
thevia
Product
• A copy of original receipt
A customer service representative will then instruct you on how to forward your devices,
receipt and Product in use during the “occurrence” and how to proceed with your claim.
COPYRIGHT & DISCLAIMER
© Copyright TrickleStar Ltd. All rights reserved.TrickleStar® is a registered trademark of
TrickleStar. Any typographical, clerical or other error or omission in this document or other
documents or information issued by TrickleStar shall be subject to correction without any
liability on the part of TrickleStar without notice.
REV 5 Jan 2016
Advanced
Advanced Powerstrip+
Powerstrip+
Product Warranty
Installation
The lifetime of the product (hereafter referred to as “Product Lifetime”), is 10 years.
TrickleStar warrants to the original purchaser that for the Product Lifetime, it shall be free
of defects in design, assembly, material, or workmanship, and will repair or replace, at its
option, any defective product free of charge.
CONNECTED DEVICE WARRANTY
TrickleStar will repair or replace, at its option, any devices which are damaged by a
transient voltage surge/spike or lightning strike, (an “Occurrence”), while properly
connected through the Product to a properly wired AC power line with protective
grounding.
If applicable, the telephone line, and/or network line must be properly connected and
installed, and the antenna cable line must also be properly connected and installed, as
determined by TrickleStar at its sole discretion.
Programming The
This Countdown
Connected DeviceTimer
Warranty is a limited warranty, subject to the limitations and
TAV-LINK
exclusions set forth herein. TrickleStar will repair or replace the damaged connected
(for CEC function)
devices, at TrickleStar’s option, an amount equal to the fair market value of the damaged
devices or the original purchase price of the devices, whichever is less, up to the maximum
of $20,000.
The fair market value of the devices shall be the current value of the devices specified in
the most recent edition of the Orion Blue Book by Orion Research Corporation, Roger
Rohrs Publisher.
IR AND RF
TrickleStar reserves the right to review the damaged Product, the damaged devices, and
TV REMOTE
the site where the damage occurred. All costs of shipping
the Product and the damaged
devices to TrickleStar for inspection shall be borne solely by the purchaser. TrickleStar
reserves the right to negotiate the cost of repairs. If TrickleStar determines, in its sole
discretion, that it is impractical to ship the damaged devices to TrickleStar, TrickleStar may
designate,
its sole
a repairOn/Off
facility to inspect and estimate the cost to repair
Press in
and
holddiscretion,
the operation
such
devices.
cost, if any,
of shipping
button
for The
10 seconds.
Then
press: the devices to and from such repair facility and
of such
estimate
be borne solely by the purchaser.
- Once
for 30shall
minutes
- Twice for 60 minutes
Damaged
remain available for inspection until the claim is finalized.
- Thricedevices
for 120 must
minutes
Whenever claims are settled, TrickleStar reserves the right to be subrogated under any
existing insurance policies the claimant may have. All above warranties are null and void
LED will flash once for 30 minutes, twice
if:
for Product
60 minutes
(default
andis not provided to TrickleStar for inspection
• The
in use during
thesetting)
occurrence
thrice
for 120 minutes.
upon TrickleStar
’s request at the sole expense of the purchaser.
• TrickleStar determines that the Product has not been installed in accordance with the
Installation Requirements, altered in any way or tampered with.
• TrickleStar determines that the damage did not result from the occurrence or that no
occurrence in fact took place, the repair or replacement of the damaged devices is
covered under a manufacturer’s warranty.
• TrickleStar determines that the connected devices were not used under normal
operating conditions or in accordance with any labels or instructions.
• The Product is not plugged directly into a receptacle.
• The Product is “daisy-chained” together in serial fashion with other power boards,
Uninterruptible Power Supplys, other surge protectors or extension cords.
• A three-to two-prong adapter is used.
• The Product is not used indoors.
7 Advanced
Outlet
PowerStrip+
This Product is not for use with aquariums and all other water-related products. Use only
indoors and in dry locations. The Connected Device Warranty only protects against
damage to properly connected devices where TrickleStar has determined, in its sole
discretion, that the damage resulted from an occurrence, and does not protect against acts
of God (other than lightning) such as flood, earthquake, war, vandalism, theft, normal-use
wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage
disturbances (i.e. brownouts or sags), non-authorized program, or system devices
modification or alteration. This warranty contains the sole warranty of TrickleStar, there are
no other warranties, expressed or, except as required by law, implied, including the implied
warranty or
condition
quality,
merchantability or fitness for a particular purpose, and
ZIGBEE
RF,ofIR,
such implied
warranties, if any, are limited in duration to the term of this warranty. Some
MOTION
states do MULTI-SENSOR
not allow limitations on how long an implied warranty lasts, so the above
limitations may not apply to you.
In no event shall TrickleStar be liable for incidental, special, direct, indirect, consequential
or multiple damages such as, but not limited to, lost business or profits arising out of the
sale or use of any Product, even if advised of the possibility of such damages. This
warranty gives you specific legal rights, and you may also have other rights, which may
vary from state to state. Some states do not allow the exclusion or limitation of incidental
or consequential damage, so the above limitations may not apply to you.
This warranty is valid only for the original purchaser of the product. All damage claims
against the product must be made within 15 days from the date of the occurrence and
must be accompanied by a receipt for the damaged devices or the warranty is void.
Warranty is valid in USA and Canada.
MAKING A WARRANTY CLAIM
Go to: www.tricklestar.com
warranty@tricklestar.com
and
print
our
claim
form
and
email
it
to
Provide the following information:
• Product part number.
• A list of the devices that were connected to the Product at the time of the
occurrence.
• A list of the devices that were damaged during the occurrence and the extent of the
Game consoles without hard disk drives (HDD) should be
damage.
into a switched outlet. Those with hard disk drives can
• The dateplugged
of the occurrence.
be purchased
plugged into
always-on outlet and controlled via
• Where you
the an
Product.
TAV-Link.
• When you
purchased the Product.
• A copy of original receipt.
A Customer Service Representative will then instruct you on how to forward your devices,
receipt and Product in use during the “occurrence” and how to proceed with your claim.
COPYRIGHT & DISCLAIMER
© Copyright TrickleStar Ltd. All rights reserved.TrickleStar® is a registered trademark of
TrickleStar. Any typographical, clerical or other error or omission in this document or other
documents or information issued by TrickleStar shall be subject to correction without any
liability on the part of TrickleStar without notice.
REV 17/12/15
surge
ground
switched
www.tricklestar.com
Advanced Powerstrip+
Troubleshooting
No power at switched outlets
subwoofer
How does the APS+ save energy?
The APS+ saves energy through:
1) Master control
• All switched outlets are automatically switched off 1 minute after the TV
is switched off.
2) Energy saving feature
• In TV mode all switched outlets are automatically switched off after
135 minutes if there is no RF, IR remote control signal or movement
detected.
• In Music mode all switched outlets are automatically switched off after
Remove
the backing
from theisdouble
Plug
TAV-Link
cable
intoRF,
theIR
HDMI
8 the
hours
if there
is no
remote control
signal
or movement
sided tape on the back of the
portdetected.
on the TV if you have a smart TV
multi-sensor & affix to or near the TV.
The
multi-sensor
must
be
connected to the APS+ and RF or
IR signal from any remote must be
received to switch on the switched
outlets.
surge
ground
swiched
always
senso
switched
switched
surge
The resettable switch must be at
the reset position.
dvd
ground
No power to outlets
amplifier
have power to them into the always-on
outlets.
DVR and set-top
boxes.
What
AVEg.
equipment
should
I plug into the switched outlets?
The TV must be plugged into the green outlet labelled < tv >. Plug in devices
such as the following to the remaining switched outlets:
• Blu-ray, DVD and CD player
• Amplifiers
Step
5 - OPTIONAL
Step 6
• Game consoles without a HDD
• Home theatre speaker systems
PowerStrip+
Solution
Step 4
game console
What AV equipment should I plug into the grey always on outlets?
Plug in Audio Visual (AV) equipment that need constant power for recording
features, timers and program guides such as:
< tv >
• TiVo
• DVD recorders
always
on
• Hard
drives
< tv >switched
• Digital receivers
• Set-top boxes
Plug
in devices
that
always
TV must be plugged into this outlet.
• Game
console
withshould
a HDD
Outlet
Problem
Step
< tv >
What can I plug into the APS+?
Step
1 any object other than a plugStep
2 APS+ outlets.
Never insert
into the
The APS+ is designed for use with indoor AV equipment. Do not use
outdoors.
Never use the APS+ for appliances other than AV equipment, such as a
fridge, electric kettle, electric oven or microwave.
Never use the APS+ for power tools such as power drills, bench saws and
other power tools.
or HDMI connected peripherals.
7 Advanced
cable box
FAQ
Installation
The icons on the outlet strip serve
ONLY as examples of home
The TV peripherals
switch
entertainment
devices do
thatnot
can
be
off when into
the TV
is off outlets. For
plugged
these
example, a DVD may be plugged into
any of the four outlets as they all
operate the same.
Alternatively, press the button on
the multi-sensor to switch on
switched outlets manually.
Make sure that the TV is plugged
into the outlet with the green TV
Plug the multi-sensor into the port on
icon.
the side of the power strip that looks
like a phone jack.
Make sure that the TV peripherals
are connected to the green
switched outlets (except for TV).
Step 7
The switched outlets will switch off
after the TV has been switched off
for one minute.
The multi-sensor is blinking on and
off every 5 seconds
This is a notification that your TV
will shut off in 10 minutes.
The TV keeps switching off after
30/60/120 minutes
The power saving/countdown
timer shuts off the TV and
peripherals
after
30/60/120
minutes if no RF/IR signal or
motion is sensed. To reset the time
for another 30/60/120 minutes,
press a button on an RF/IR remote
control or move in front of the
multi-sensor.
Plug the power strip into a grounded
receptacle. The ground and surge
lights will illuminate indicating proper
grounding and surge protection is
functional.
surge
ground
switched
www.tricklestar.com
Advanced Powerstrip+
on
Trouble Shooting
No power at switched outlets
switched
subwoofer
switched
surge
The resettable switch must be at
the reset position.
dvd
ground
No power to outlets
amplifier
have power to them into the always on
outlets.
DVR and set-top
boxes.
What
AVEg.
equipment
should
I plug into the switched outlets?
The TV must be plugged into the green outlet labelled < tv >. Plug in devices
such as the following to the remaining switched outlets:
• Blu-ray, DVD and CD player
• Amplifiers
Step
5 - OPTIONAL
Step 6
• Game consoles without a HDD
• Home theatre speaker systems
How does the APS+ save energy?
The APS+ saves energy through:
1) Master control
• All switched outlets are automatically switched off within one minute after
the TV is switched off.
2) Energy saving feature
• In TV mode all switched outlets are automatically switched off after
135 minutes if there is no RF, IR remote control signal or movement
detected.
• In music mode all switched outlets are automatically switched off after
Remove
backing
from the double
Plug
the TAV
linkif multi-sensor
eight
hours
there is no into
RF, TV
IR remote
controlthe
signal
or movement
is
sided tape on the back of the
HDMI
port if you have a smart TV or
detected.
www.tricklestar.com
multi-sensor & fix to/near the TV
PowerStrip+
Solution
Step 4
game console
What AV equipment should I plug into the grey always on outlets?
Plug in Audio Visual (AV) equipment that need constant power for recording
features, timers and program guides such as:
< tv >
• TiVo
• DVD recorders
• Devices
always with
on a hard disk drive (HDD)
< tv >switched
• Digital receivers
• Set-top boxes
Plug
in devices
always
TV must be plugged into this outlet.
• Game
consolethat
withshould
a HDD
Outlet
Problem
Step
< tv >
What can I plug into the APS+?
Step
1 any object other than a plugStep
2 APS+ outlets.
Never insert
into the
The APS+ is designed for use with indoor AV equipment. Do not use
outdoors.
Never use the APS+ for appliances other than AV equipment, such as a
fridge, electric kettle, electric oven or microwave.
Never use the APS+ for power tools such as power drills, bench saws and
other power tools.
HDMI connected peripherals.
7 Advanced
cable box
FAQ
Installation
The icons on the outlet strip serve
ONLY as examples of home
The TV peripherals
switch
entertainment
devices do
thatnotcan
be
off when into
the TV
is off outlets. For
plugged
these
example, a DVD may be plugged into
any of the four switched outlets as they
all operate the same.
The
multi-sensor
must
be
connected to the APS+ and RF or
IR signal from any remote must be
received to switch on the switched
outlets.
surge
ground
swiched
senso
Alternatively, press the button on
the multi-sensor to switch on
switched outlets manually.
Make sure that the TV is plugged
into the outlet with the green TV
Plug the multi-sensor into the port on
icon.
the side of the power strip that looks
like a phone jack.
Make sure that the TV peripherals
are connected to the green
switched outlets (except for TV).
Step 7
The switched outlets will switch off
after the TV has been switched off
for 1 minute.
The multi-sensor is blinking on and
off every 5 seconds
This is a notification that your TV
will shut off in 10 minutes.
The TV keeps switching off after
30, 60, 120 minutes
The power saving / countdown
timer shuts off the TV and
peripherals after 30 / 60 / 120
minutes if no RF/IR signal or
movement is sensed. To reset the
time for another 30 / 60 / 120
minutes, press a button on an
RF/IR remote control or move in
front of the multi-sensor.
Plug the power strip into a grounded
receptacle. The ground and surge
lights will illuminate - indicating proper
grounding and surge protection is
functional.
always
Advanced Powerstrip+
on
Operation
- TV Mode
Product Overview
Step 1
Energy Saving
ON
4 5 6
Press power on TV remote control to
turn on TV.
Step 3
Step 4
10
Power Connection
The Product must
only
be plugged into a grounded receptacle for surge
User
Switches
On
protection to operateTVcorrectly.
All connected devices should be plugged
directly into the Product. Use of an extension cord, adaptor or other powerstrip
in conjunction with the Product will void all warranties.
Sensor/RJ11
RF +Port
IR Remote Control Button
Detected?
Plug the RF/IR &Press
motion
multi-sensor into this port.
There
connector is inserted correctly.
Yes will be a soft audible ‘click’ when the No
Surge LED
Next 15, 30,
60 min Countdown
When illuminated,
it indicates
that the surge protection is functioning normally.
Timer Starts
If this LED illuminates
red
or
extinguishes at any time, the Product was
RF/IR Or Movement
sacrificed to protect Detected
your devices and must be replaced.
Yes
No
Ground
LED
ALERTS START
When illuminated, it indicates that the Product is correctly
grounded.
10 min Before
Countdown
Timer
Expirycontact an
If not illuminated, there is a grounding problem and you
must
TV + Peripherals
electrician to properly
ground
willSounds
not work
Buzzer
3X with an
Switch
Off the socket. Surge protection
LED Flashes
improperly grounded outlet.
Switch On
www.tricklestar.com
15, 30, 60 min Countdown Timer
Starts
Terms
6 Switched Outlets LED
OFF
Use peripheral RF/IR remotes to turn
on peripherals as needed.
PowerStrip+
RF/IR + Movement Multi-Sensor
The Zigbee multi-sensor is connected to the powerstrip via the RJ11 port
User Presses RF/IR
marked “sensor.”
Mount the ZigBee multi-sensor on the underside of the TV,
Remote Control
near the IR receiver on the TV (typically located next to the TV's power on/off
button). The multi-sensor must be located within line of sight of where you
normally use your
remote
controls.
Switched
Outlets
Press any button on TV remote control
to turn on the switched outlets.
Outlet
Step 2
7 Advanced
When done watching TV, press the
power button on the TV remote control
to switch off the TV. All switched outlets
will then automatically turn off within
one minute.
that thetransmitted
switched outlets
are receiving
IR When illuminated, it- indicates
Infrared signal,
by a remote
control power.
- Multi-sensor senses for an IR command
IR Signal Sensor
Resettable Circuit
7 Sensor
- Breaker
Multi-sensor uses passive Infrared sensing to
PIR
All outlets on the Product
are protected. If the surge, ground, and switched
detect movement
connected
devices
are notcontrol
receiving power,
- Radio and/or
frequency,
transmitted
by a remote
RF LEDs are not illuminated
switch the circuit breaker
to activate
power.
Movement
- Movement
detected
by PIR
Countdown Timer
- Time before the switched outlets are automatically
8 Always-On Outlets
switched off
Equipment that requires continuous power should be plugged into the
- 30 minutes / 60 minutes (default) / 120 minutes
Countdown
Period
always-on outlets.
- Red LED located in multi-sensor
LED
- When IR or movement is sensed, the LED will flash
9 < tv > Outlet
Buzzer
Buzzer
located
in the
multi-sensor
The outlet marked-
is the
control
outlet
and includes true RMS power
measurement.
IMPORTANT
Countdown
Timer Operation
THE
PLUGGED
INTO
THIS OUTLET
For
theTV
firstMUST
15 / 30BE
/ 60
minutes - the
multi-sensor
senses for RF/IR only
For the next 15 / 30 / 60 minutes - the multi-sensor senses for RF/IR signal or
10 movement
Switched Outlets
After
30 / is
60no
/ 120
if no RF/IR
or movement
has been
If there
RF,minutes
IR, or motion
detected,
these outlets
will switch off.
sensed the switched outlets willl switch off automatically.
Advanced Powerstrip+
Operation
- TV Mode
Product Overview
Step 1
Energy Saving
Step 2
ON
4 5 6
Power Connection
User Switches
TV Onbe plugged into a grounded receptacle for surge
The Product must only
protection to operate correctly. All connected devices should be plugged
directly into
the Product. Use of an extension cord, adaptor or other
15/30/60 Min Countdown Timer
powerstrip in conjunction
Starts with the Product will void all warranties.
Press Detected?
Sensor/RJ11 Port
Plug
Yes the RF / IR + Movement multi-sensor
No into this port.
There will be a soft audible ‘click’ when the connector is inserted correctly.
Surge LEDNext 15/30/60 Min Countdown
Timer Starts
When illuminated,
it indicates that the surge protection is functioning
RF/IR or Motion
normally. If this LED
illuminates red or extinguishes at any time, the
Detected
Product
was sacrificed to protect your devices
and must be replaced.
Yes
No
Step 4
OFF
Use peripheral RF/IR remotes to turn
on peripherals as needed.
www.tricklestar.com
RF + IR Remote Control Button
ALERTS START
10 Min Before Countdown
Ground LED
Timer Expiry
When illuminated,
indicates that the Product is correctly grounded.
TV &itPeripherals
Buzzer Sounds 3X
Switch
Off
If not illuminated, there is a grounding problem and you
contact an
LEDmust
Flashes
electrician to properly ground the socket. Surge protection will not work
Terms
with an improperly grounded outlet.
10
PowerStrip+
RF/IR + Movement Multi-Sensor
User Presses RF/IR
The ZigBee multi-sensor
is connected to the powerstrip via the RJ 11 port
Remote Control
- marked “sensor”. Mount the ZigBee multi-sensor on the underside of the
TV, near to the IR receiver on the TV. Typically located next to the TV
Switched
Outlets
power on/off button.
The
multi-sensor must be located within line of sight
Switch On
of where you normally use your remote controls.
Press power on TV remote control to
turn on TV.
Step 3
Outlet
Press any button on TV remote control
to turn on the switched outlets.
7 Advanced
When done watching TV press the
power button on the TV remote to
switch off the TV.
All switched outlets will then
automatically turn off after 1 minute.
- Infrared signal, transmitted by a remote control
IR
6 Signal
Switched
Outlets
- LED
Multi-sensor senses for an IR command
IR
Sensor
- Multi-sensor
When lit, it indicates
that the Outlets
powered.
uses are
passive
Infrared sensing to
PIR Sensor
detect movement
7 Resettable Circuit
Breaker
- Radio
frequency, transmitted by a remote control
RF
Provides protection
for all
Outlets
on the product. If no devices are
Motion
- Motion
detected
by PIR
powered
or LEDs- lit,
press
the the
circuit
breaker
to activate
power.
Countdown
Timer
Time
before
switched
outlets
are automatically
switched off
8 Always On Outlets
- 30/60/120 minutes (default - 60 min.)
Countdown Period
Outlets remain ON
all the
time.
- Red
LED
located in multi-sensor
LED
- When IR or motion is sensed, the LED will flash
9 < tv > Outlet
- Buzzer located in the multi-sensor
Buzzer
The Outlet includes True RMS Power Measurement outlet for TV.
IMPORTANT
Countdown
Timer
THE TV MUST
BEOperation
PLUGGED INTO THIS OUTLET
For the first 15/30/60 minutes - the multi-sensor senses for RF/IR only.
the next 15/30/60
10 For
Switched
Outletsminutes - the multi-sensor senses for RF/IR signal or
motion.
Switched off if there is no RF, IR or movement is detected, or if the TV is
Ifswitched
no RF/IR or
motion has been sensed during the 30/60/120 minute countdown
off.
period, the switched outlets will switch off automatically.
Advanced Powerstrip+
Operation - Music Mode
Step 1
Operation Countdown Timer Setting
If any RF/IR signal is detected, the
countdown
timer
period
will
automatically reset for another eight
hours.
If the TV is switched on during music
mode, the Advanced PowerStrip+ will
switch to TV mode.
Operation RF Remote Control and Pairing
A blue LED will flash for a period of 15
seconds - indicating the multi-sensor
is in pairing mode.
www.tricklestar.com
The sensor has a default buzzer
notification that will sound three times
during the 10 minute countdown
timer period.
To configure the countdown timer,
press and hold the button for 10
seconds until the red LED illuminates.
Then press:
• Once for 30 minutes
• Twice for 60 minutes
• Three times for 120 minutes
To disable the audible notification,
press and hold the button for 10
seconds until the red LED
illuminates, then press the button four
times. The red LED will flash four
times to confirm the countdown timer
buzzer has been disabled.
After countdown timer is set, the LED
will flash the number of times that
timer has been set to.
Press power on all music related
devices to switch them on.
Quickly press the pinhole pairing
button located on the back of the
multi-sensor to trigger the pairing
process.
PowerStrip+
Note
If the TV is not switched on at any time
in between, all switched outlets will
turn off after eight hours.
Step 1
Outlet
Step 1
Note
Press any button on AV receiver or
DVD/CD player remote control to turn
on the switched outlets.
7 Advanced
Step 2
Place the RF remote control near the
sensor (within two inches) and press
the 0 key on the remote until the red
LED on the sensor illuminates. Repeat
with other RF remote controls (up to
four).
Operation Delete Paired RF Remote Control Address
Step 1
Press and hold the pin-hole pairing
button for five seconds.
Blue LED will illuminate for one
second - indicating all paired remote
control addresses have been erased.
Advanced Powerstrip+

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2016:01:25 08:51:08+08:00
Creator                         : Adobe Illustrator CS5
GTS PDFX Version                : PDF/X-4
Modify Date                     : 2016:01:28 11:44:51+08:00
Trapped                         : False
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2016:01:28 11:44:51+08:00
Creator Tool                    : Adobe Illustrator CS5
Format                          : application/pdf
Title                           : DS TS1811_5 Jan 2016
Document ID                     : uuid:ee5cb90e-1cd4-4277-9651-fd5dd2a7abf1
Instance ID                     : uuid:12d52adb-3454-45bc-b3d9-4bee4bc1a8d5
Producer                        : Adobe PDF library 9.90
Page Count                      : 11

EXIF Metadata provided by EXIF.tools