TRIMBLE EUROPE 10900310 Rugged Smart Phone User Manual MobileMapper50 WiFi Quick blue

TRIMBLE EUROPE BV Rugged Smart Phone MobileMapper50 WiFi Quick blue

User Manual

MobileMapper 50 Quick Start GuideProduct NameModel NameLCD DISPLAYUNIT SIZEWEIGHTBATTERYFRONT CAMBACK CAMOperating temperatureoperating voltageSpecificationUnpacking• MobileMapper 50 unit • USB cable• International battery charger • Two spare screen protection filmsThis package does not include the headset for deviceFront and Rear ViewsInstalling Card (SD)Rugged Smart PhoneMobileMapper50_WiFi5.3 1280X720 BRIGHTNESS 400164x82x14.6278g3100mAh2M 8MP，FLASH Software Set-20°C – 60°C3.5V-4.2VFront Camera Lens *+VolumeLanyard EyePower ButtonExternal GNSS Antenna InputSpeakerRear Camera LensPower/Data Connector **Battery Trapdoor LeverThis recess to eject the battery trapdoorBattery TrapdoorReset buttonMicro USB-HeadphoneFunction Key 1Function Key 2Touch ScreenMenuReturnHome+-*: Depending on model ** :Not usedCharging the Battery before First UseUse the USB cable provided: Connect the small end to the device’s Micro USB connector, and the other end either to a USB connector on your computer, or to the battery charger. In the latter case, connect the charger to a power outlet after choosing the adapter that is suitable in the country of use. Then whatever the charging source used, wait until the screen reports a fully charged battery.Turning on MobileMapper 50. Hold the power button depressed until the splash screen appears.Using MobileMapper 50. Refer to the documentation of the Android application you wish to use so you can safely install and run this application.Entering/Quitting the Sleep Mode. When active, this mode allows you to save battery power while keeping the unit running in the background. To enter the sleep mode, just press the Power button briefly. To return to normal operating mode, press this button again.Turning Off MobileMapper 50. Hold the power button depressed until the shutdown message is displayed. Select Shutdown and touch OK.CAUTION: This product contains a rechargeable Li-ion battery. Please refer to the regulations in force in your country concerning the use and transportation of Li-ion batteries.P/N 631676© 2016 Trimble Navigation Limited. All rights reserved. Spectra Precision is a Division of Trimble Navigation Limited. Spectra Precision and the Spectra Precision logo are trademarks of Trimble Navigation Limited or its subsidiaries. This product is protected by US and international copyright, trademark and patent law. Revision A. www.spectraprecision.comInstall the card BEFORE inserting the battery: Slide the battery trapdoor lever downward. Then use a flat, rigid plastic strip that you insert into the recess (see picture) to eject the battery trapdoor. Orient the cards as illustrated, contact side facing down, before pushing them in.Inserting the Battery. Insert the battery gently into the compartment, making sure the electrical contacts of the battery are pushed against those located in the battery compartment. Put the trapdoor back in place: First insert its two legs into the lower part of the unit, then push the trapdoor against the unit, gradually from bottom to top, using your two thumbs, until you reach the top of the trapdoor. Then slide the lever upward with a thumb.
Power on Make sure that the battery is charged for at least 30 minutes before you turn on the device at the first time.1. Press the power key until the device vibrating .2. Wait a while for the device to start.To activate the screen, please press the power key firstly. MobileMapper 50 Quick Start GuideSetting up your device A quick guide book will help you to configure the basic system settings. For example, sign in the account (your googleTM account) .Accessing SettingsView and change settings for your device form the Settings menu. The Settings menu is accessible from both the Applicationg screen andthe Quick settings panel.To access your device settings1. From your Home screen, tap .2. Find and tap .Key function BasicsFunction keyButton AFunction keyButton BNotification and quick settingsOpen and close the Notification panel1. To open the Notification panel, drag the status bar downwards.2. To close the Notification panel, drag the panel upwards.Application screenOpen the Application screen.Back buttonReturn to the previous interface or exit the application.Home buttonone time click - Exit the application returns to the main interface.Long pressing – Searching assistant for operating APPs overview.Manu buttonOpen the application list of most recently used.Note: Enter Settings-button Modify the Home button long press function and the menu button click function.Function Key button APress this button A will enter the U-center application.Function Key button BPress this button B will enter the camera application.Please note: The Function of Button A and Button B could be modified by entering the Setting Menu.Basic applications and settingsUse the Messaging application to send and receive text and multimedia messages.Go to Goole PlayTM to download free and paid applications for your device.Web browsing In WIFI and data network.Use the camera application to take photos and video by front and back camera.Optimise the device settings to suit your own requirements.WLAN connection Enter settings menu, WLAN interface, turn WLAN on and select Wi-Fi hotspot, enter password to connect Wi-Fi. If the Wi-Fi hotspot does not have the password, the system will connect Wi-Fi automatically.
MobileMapper 50 Quick Start GuidePRODUCT SAFETY WARNINGSUse responsibly. Read all instructions and safety information before use to avoid injury.The maximum operating ambient temperature of the equipment declared by the manufacturer is 60°C.Battery safetyCharge battery only at ambient temperatures ranging from 0°C to 60°C.(1) CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type of battery recommended by the manufacturer. Dispose of used batteries according to battery manufacturer’s instructions.(2) CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.(3) CAUTION:Charging temperature upper limit is 45°C.Charger safetyWhen charging, please place the device in an environment that has a normal room temperature and good ventilation. It is recommended to charge the device in an environment with a temperature that ranges from 0°C~40°C.Camflash safetyLED is only used as indicating light.Wi-Fi SafetyTurn Wi-Fi off in areas where Wi-Fi use is prohibited or when it may cause interference or danger, such as in airplanes while flying.Care & MaintenanceExcessive sound pressure from earphones and headphones can cause hearing loss.USB data cablesCAUTION: Use of USB data cables is restricted to standard USB version 2.0 or higher.Powered USB is prohibited.LanyardUse the lanyard responsibly. It is primarily designed to ease hand-held use of the product (limb-worn). The lanyard should not be used to attach the product next to the body.FCC StatementThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must not accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.FCC Caution:Any Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only.

Navigation menu