TRIMBLE EUROPE 110896 Communication Module for GPS Surveying Device User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	513562
Application ID	Z0HMlGmf8mIDq+aUmbLiEA==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.93kB (86677 bits)
Date Submitted	2005-02-08 00:00:00
Date Available	2005-02-08 00:00:00
Creation Date	2004-09-07 15:29:10
Producing Software	HypeGEAR PDFLib rev1.4 $Date: 2002/10/11 16:20:19 $
Document Lastmod	0000-00-00 00:00:00
Document Title	Manual
Document Creator	HyperGEAR,inc.
Document Author:	HyperGEAR TIFF/PDF Convert Library

‘TH/lLE
S Nk/[éArnOA/
CH/‘v’lcfs fireflrdc”
may) 5151907
56 P o c/
GSM PROCEDURE
Procedure to configure the GSM modem in transmitter.
“49,“ , J, wire/z (can warm/J fr , A may?
Insert Sim Card Test in the Com module 0M
Power on Zrnax with Com module
Select baud rate portA at 19200 bands (menu: setting/baud rate) — 5 "F
Connect a RS232 cable between Port A and a PC which is equipped of a communication soft
(ex: hyperterminal) my” A 5s f”i ~ 1M" : ~ “a“ ,,f
- Configure the PC baud rate at 19200 baud / 8 data bits / none parity/one stop bits / no
control flow
- Send the following commands to Zmax:
o $PASHQR1D (validation of the RSZSZ link)
a $PASHQ,GETVER
o sPASHQNERSION (information about the presence of the Corn module answer:
radio: GSM
o $PASHS,MDM(ON (select and power on GSM modem)
0 $PASHS,DSY,D,A (dale from part D modem are sent to port A)
$PASHS(DSY.A.D (data from port A are sent to port D)
AT+CBAND? The command questions about the selected band:
./ - n=3 for PCS 1900 MHZ
4 ' n=4 for GSM/1800 MHz
1 if n= 4, which corresponds GMS/DCS hand, then send:
AT+CBAND=3 : select 1900 MHZ band
$PASHS,DSY,OFF (disable daisy chain between the com module and port A)
$PASHS,MDM,OFF (turn offlhe GSM modem)
$PASHS,MDM,ON (select and power on GSM modem‘ cycle onloffto store band)
$PASHS,DSY,D,A (data from part D modem are sent to port A)
$PASHS,DSY,A,D (data from port A are sent to port D)
A"l"+CBAND’,J Verification of the selected hand zn=3
AT+CMER=0,0,1(0,0 (to receive display‘s messages)
AT+CKPD=’ ’,50 (to insert test mode)
AT+CKPD:“1 10512? (select channel number 512; see below)
AT+CKPD="1205#" (select the power level 05)
AT-FCKPD="31Ww (generating RF)
Verify With a spectrum analyser the emitted frequency
Make measurement for approval FCC
AT+CKFD="O1#" (Exit Test mode)
ooooooooooooooo
, MW) 41th 44am/r‘wv Bum/e
, o , ,
“vow/L dim/UL wiwtf’fi?’ COILJ/L Ovi (£93 > O£s(orvum:-;/f
~ ‘Tuh A, Jr 9/1“qu mL/i
Notes:
Selection channels xxxx valid values: For GSM: 0001-01124
For DCS: 0512—0885
For EGSM: 0975-1023
For PCs: 0512—0810
GSM:
F=890+(N*0. 2)
N— channel (1 — 124)
F— Frequency: CH1 890.2MHz
CH2 890.4MHZ
CH3 890.6MHZ
CH124 914.8MHZ
CS:
F=1710+(N*0 2)
N- channel (512— 885)
F — Frequency: CH512 1710.2 MHz
‘CHBBS 1784.8MHZ
PCS:
F=1850+(N*0.2)
N ~ channel (512 — 810)
F — Frequency: CH512 1850 MHz
bH810 1909MHZ

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 2
Creator                         : HyperGEAR,inc.
Create Date                     : 2004:09:07 15:29:10
Author                          : HyperGEAR TIFF/PDF Convert Library
Producer                        : HypeGEAR PDFLib rev1.4 $Date: 2002/10/11 16:20:19 $

EXIF Metadata provided by EXIF.tools