TTE Technology 40D100 LCD TV User Manual 70 32MS55 QSG9A
TTE Technology, Inc. LCD TV 70 32MS55 QSG9A
User Manual
Ready. Set. Go! D-Series / D100 Important Information Also, make sure the stand or base you use is of adequate size and strength to prevent the TV from being accidentally tipped over, pushed off, or pulled off. This could cause personal injury and/or damage to the TV. Refer to the Important Safety Instructions on the next page. This symbol indicates that this product incorporates double insulation between hazardous main voltage and user accessible parts. When servicing, use only identical replacement parts. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. The Power button on this TV and your remote control puts the TV into a very low-power standby mode but will not completely turn the power off. In order to completely shut the power off, you will need to disconnect the power cord from the outlet. The mains plug/appliance coupler is used to completely turn off the device. If you prefer to completely turn off the device, you should install the TV in a manner that allows you to disconnect the power cord when desired. Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury. WARNING To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. This product should not be exposed to dripping or splashing. No objects filled with liquids, such as vases, should be placed on the apparatus. This symbol indicates important instructions accompanying the product. Product Registration Please register your TCL TV purchase on-line at www.tclusa.com. It will make it easier to contact you should it ever be necessary. Registration is not required for warranty coverage. WARNING The TV is unstable if it is not properly attached to the base or mounted to the wall. Please follow the base or wall mounting instructions provided in the User’s Guide to ensure your safety. Product Information Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model numbers in case you need them. These numbers are located on the product. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Keep the apparatus at least 20cm far sway trom the human body. Warning: The batteries shall not be exposed to excessive heat such as sunshine, fire or the like. Refer to the identification/rating label located on the back panel of your product for its proper operating voltage. Cable TV Installer: This reminder is provided to call your attention to Article 820-40 of the National Electrical Code (Section 54 of the Canadian Electrical Code, Part 1) which provides guidelines for proper grounding and, in particular, specifies that the cable ground should be connected to the grounding system of the building as close to the point of cable entry as practical. Input Signal Compatibility Antenna/Cable 480i, 480p, 720p, l080i (NTSC, ATSC, and QAM formats) Composite Video 480i, 576i HDMI 480i, 480p, 720p/60Hz, 1080i/60Hz, 1080p/60Hz, 576i/p, 1080i/p/50Hz For the best viewing experience, remove the energy guide label from the TV front panel or TV screen before use. Important: This television is a table model and is designed to sit on a firm, flat surface. Don’t place the TV on soft carpeting or similar surface because the ventilation slots on the bottom of the unit will be blocked, resulting in reduced lifetime from overheating. To assure adequate ventilation for this product, maintain a spacing of 1 inch from the top and side of the TV receiver and 2 inches from the rear of the TV receiver and other surfaces. Model No. Serial No. Purchase Date Dealer/Address/Phone Important Safety Instructions other objects. Do not expose the apparatus to any external heat sources. Do not place any heat sources such as candles, lamps, etc. on the apparatus. Do not expose the device to high levels of humidity or to any possible sources of moisture. When disposing of used batteries from the remote control, consult local regulations regarding proper disposal. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 15. If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70-2011 (Section 54 of Canadian Electrical Code, Part 1) provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead in wire to an antenna-discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See following example: 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 10. Only use attachments/accessories specified by the manufacturer. ANTENNA LEAD IN WIRE 11. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. GROUND CLAMP 12. Unplug this apparatus during lightning storms or when unused for long periods of time. ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) 13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 14. For safe operation of the apparatus, observe these installation requirements: Keep at least 2 inches of ventilation space between the rear cover of the apparatus and the wall. Keep at least 1 inch of ventilation space between the apparatus and all other surfaces. Do not allow any of the apparatus’ ventilation openings to be blocked by objects that might obstruct them, such as; newspapers, curtains, table-cloths or any ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PARTH) What’s required What’s included TCL TV TV stands Removable power cable (only for 49" model) 4 x TV stand screws (Phillips) (ST4X20mm for 32”) (ST4X25mm for 40”) (M5X35mm for 49”) 2 x AAA batteries for remote TV remote Phillips head screwdriver Step 1 Set up your TV To mount on a wall Ready for the step-by-step? You’re only minutes away from TV bliss! If you are mounting your TV to the wall, don’t attach the stands. Remove your TV from the box To mount your TV to the wall, purchase a VESA wall mount Be careful, it’s heavy! Models of 32” or 40” To use the stand To prevent damage to the screen, carefully place your TV on a soft, cushioned surface. Align the base stand with the screw hole located on the TV stand column. Secure the stands to the TV with four (4) screws. Model of 49” Purchase a VESA 100x100, M4x12 screw Purchase a VESA 200x200, M6x16 screw The VESA number is the horizontal and vertical measurement of the mounting holes. For example, 200X200 refers to the fact that the mounting measurements are 200mm horizontally and 200mm vertically. Follow the instructions that come with the wall mount. Your wall mount must be able to bear a minimum of five times the TV’s net weight to avoid causing damage. Table Stand Placement Safety: Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: - Using cabinets or stands recommended by the television manufacturer. - Only using furniture that can safely support the television set. - Ensuring the television set is not overhanging the edge of the supporting furniture. - Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support. - Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture. - Educating children about the dangers of climbing on furniture to reach the television set or its controls. Stand If your existing television set is being retained and relocated, the same considerations as above should be applied. Screws (ST4 X 20mm for 32”) (ST4 X 25mm for 40”) (M5 X 35mm for 49”) Step 2 Power up Step 3 Your remote In this step, we’ll make sure all systems are GO! Here are some buttons you should know about. Power your TV remote by inserting the included batteries. A POWER Turn TV on and off B INPUT Source selection Plug your power cable in to the wall outlet. (connect the power cable to the TV first for 49”) C 0-9 Numeric keys for Channel input D GUIDE The Electronic Program Guide for digital channels Connect other devices by referencing port label and descriptions on the bottom of page 6. For digital channel input F MENU Main menu G CLEAR Clear the screen and return to normal Set Up Tip! Always replace dead batteries with two brand-new batteries from the same manufacturer. Never use damaged batteries. viewing If your remote gets warm/hot during use, discontinue use and contact customer support immediately at www.TCLUSA.com/support. OK Adjusts the menu controls I GOBACK Return to the previously viewed channel J PIC Selects picture mode K VOL+/- Volume adjusting L CH+/- Channel adjusting M INFO Channel information N MUTE Turn volume on and off O FAV Choose your favorite channel, or USB, sound mode, TV mode set in your favorite list. For playing music and photos Step 4 Step 5 Get to know your TV A STATUS LIGHT Glows when the TV is B USB PORT Connect a USB device to access photos, music and movies. AUDIO OUT CABLE/ ANT TV BACK Y/VIDEO OPTICAL AUDIO OUT Use the arrows on the remote to adjust the initial menu. in standby, flashes when the TV is busy, flashes once with each button press of the remote control. TV FRONT Initial Setup A/V IN Pb Pr COMPONENT IN C AUDIO OUT Use an RCA audio cable to connect your TV to a compatible audio receiver. D CABLE/ANTENNA IN Connect an outdoor VHF/UHF antenna or Cable TV feed. Select your preferred language for the menu system. Set the power on mode, Select “Home Mode” for best viewing and energy efficiency at home. Select either “Antenna” or “Cable/Sat” as the channel scan type. The screen will change to show the progress of the channel scanning process. E 3 HDMI® PORTS Highest Quality audio/video connection. Connect cable box, Blu-ray player, gaming console, or other devices to your TV using HDMI cables. HDMI ARC PORT Connect HDMI ARC (audio return channel) capable audio devices like sound bars or AV receivers. F OPTICAL(AUDIO OUT) Connect an optical cable to an external digital audio system. G A/V IN If your device isn’t able to connect using HDMI®, connect to your TV using standard red/white/yellow cables. H COMPONENT IN If your device isn’t able to connect using HDMI®, connect to your TV using standard green/blue/red/white/red cables. TTE Technology, Inc. (“TTE”) Limited Warranty If repaired at an Authorized TCL Service Center, TTE is not responsible for transportation costs to the Authorized TCL Service Center. However, TTE will pay for return shipping. TTE will provide instructions for packaging and shipping the unit. Proof of purchase in the form of a bill of sale or receipted invoice from an Authorized Dealer which is evidence that the product is within the warranty period must be presented to obtain warranty service. PRE-AUTHORIZATION MUST BE OBTAINED BEFORE (1) SENDING ANY PRODUCT TO AN AUTHORIZED TCL SERVICE CENTER, OR (2) OBTAINING ANY IN-HOME REPAIR/REPLACEMENT/RENTAL SERVICES. All LCD/LED Models. What your warranty covers: Defects in materials or workmanship to the original owner of this TCL product when purchased as new from an Authorized Dealer of TCL brand products in the United States and packaged with this warranty statement. New LCD/LED Televisions (Non-Commercial Use) For how long after your purchase: One (1) year from date of purchase for parts and labor for non-commercial use. New LCD/LED Televisions (Commercial Use) For how long after your purchase: What your warranty does not cover: Six (6) months from date of purchase for parts and labor for commercial use. Commercial use includes, but is not limited to, the use of this product in a commercial or business environment, the use of this product in an institution or for institutional purposes, or other commercial purposes including rental purposes. Customer instruction. (Your Owner’s Manual describes how to install, adjust, and operate your unit. Any additional information should be obtained from your Authorized Dealer). Installation and related adjustments, or damage resulting from installation. Damage resulting from non-approved installation methods. Signal reception problems not caused by your unit. Damage from misuse, abuse, neglect, normal wear and tear, cosmetic damage, mishandling, faulty installation, or power line surges. Markings or images on the television’s panel resulting from viewing fixed images (including but not limited to certain 4:3 images on wide screen televisions, or data or images in fixed screen locations from banners, video games, or certain broadcast networks). A television that has been modified or incorporated into other products. A unit purchased or serviced outside the USA. A unit sold in “As-Is”, “Factory Reconditioned”, “Factory Re-Certified”, or “Refurbished” condition or with faults. Acts of nature or God, such as but not limited to earthquake or lightning damage. Special, incidental or consequential damages. What we will do: At TTE’s discretion, (1) pay an Authorized TCL Service Center for both labor charges and parts to repair your television, or (2) replace your television with a new or refurbished / remanufactured equivalent value product. The decision to repair or replace will be made solely by TTE. See “How to get service”. How to get service: Call 1-877-300-8837. Please have your original purchase receipt or proof of purchase (bill of sale or receipted invoice), the unit’s date of purchase, place of purchase and model/serial number ready. The model/serial number information can be found on the back of your unit. A representative will troubleshoot your problem over the telephone. If it is determined that your unit requires service, the service location will be at the sole discretion of TTE based upon the TTE Limited Warranty Statement. At the sole discretion of TTE, television screen sizes 32” and smaller will either be repaired at an Authorized TCL Service Center or directly exchanged for a new or refurbished/remanufactured unit. At the sole discretion of TTE, television screen sizes 33” through 55” or larger will either be repaired at an Authorized TCL Service Center or repaired in-home. Product Registration: Please register your TCL purchase on-line at www.tclusa.com. It will make it easier to contact you should it ever be necessary. Registration is not required for warranty coverage. Broadcasting & Operating Environment TTE Technology, Inc. (“TTE”) Limited Warranty Broadcasting system US System NTSC-M ATSC standard (8VSB), QAM LIMITATION OF WARRANTY THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. NO VERBAL OR WRITTEN INFORMATION GIVEN BY TTE TECHNOLOGY, INC., ITS AGENTS OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE OR MODIFY THE SCOPE OF THIS WARRANTY. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. TTE TECHNOLOGY, INC. SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF CALIFORNIA. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY AND WARRANTY PERIOD SET FORTH ABOVE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE. PLEASE VISIT WWW.TCLUSA.COM TO VIEW THE MOST CURRENT VERSION. Receiving Channels VHF2-13 UHF14-69 CATV 14-36 (A)-(W) 37-59 (AA)-(WW) 60-85 (AAA)-(ZZZ) 86-94 (86)-(94)95-99 (A-5)-(A-1) 100-135 (100)-(135) 01 (4A) How State Law relates to this warranty: Some states do not allow the exclusion or limitation of incidental or consequential damages, orlimitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you also may have other rights that vary from state to state. If you purchased your unit outside the United States or seek warranty coverage outside the United States: This warranty does not apply. Contact your dealer for warranty information. Service calls which do not involve defective materials or workmanship are not covered by this warranty. Costs of such service calls are the sole responsibility of the purchaser. Tuner type Frequency synthesized Operating Temperature 5°C to 35°C (41°F to 95°F) Operating Humidity 20% to 80%, non-condensing Storage Temperature -15°C to 45°C (5°F to 113°F) Storage Humidity 10% to 90%, non-condensing Troubleshooting How to turn on/off voice guidance quickly Having trouble completing the guided setup? Don’t worry, it’s usually an easy fix. • Press “Menu” button; My picture is too small • Press button “1”, “2” and “3” in sequence; • The voice guidance has been turn on; • Press zoom-/zoom+ button to select picture mode, then select zoom to • Repeat the action to turn off the voice guidance. adjust picture size. Problems connecting my cable/satellite box or antenna through a coax cable • For best performance, use the HDMI connection. If not available, then: • Make sure the cable connections to the TV and your device are securely fastened. • Select cable/satellite box or antenna TV input. • Select “start finding channels” and follow the on-screen instructions to perform a full channel scan. What is the remote code for programming my Universal or Cable/ Satellite box remote control • Pleade visit www.tclusa.com/remotecodes This product incorporates HDMI technology. HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Manufactured under license from Dolby Laboratories. "Dolby, Dolby Audio, and double-D symbol are trademarks of Dolby Laboratories." FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This Class B digital apparatus complies with Canadian ICES-003. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Please do not send any products to the California address listed in this manual or on the carton. This will only add delays in service for your product. Figures and illustrations in this User’s Guide are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. Need more help? www.TCLUSA.com/support 1-877-300-8837 TTE Technology, Inc. 2455 Anselmo Drive, Suite 101, Corona, CA 92879 TCL and associated marks are trademarks of TCL Corporation, used under license to TTE Technology Inc. Part No.: 70-32MS55-QSG9A
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : 3.1-702 Format : application/pdf Title : 70-32MS55-QSG9A Metadata Date : 2016:08:04 11:28:29+08:00 Modify Date : 2016:08:04 11:28:29+08:00 Create Date : 2016:08:04 11:25:20+09:00 Creator Tool : Adobe Illustrator CC 2014 (Windows) Thumbnail Width : 256 Thumbnail Height : 168 Thumbnail Format : JPEG Thumbnail Image : (Binary data 16548 bytes, use -b option to extract) Instance ID : uuid:3440522c-ce14-4a09-853a-73bd40edcad6 Document ID : xmp.did:4ff738a0-58c5-894c-b360-2a2e84c2017a Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Version ID : 1 Derived From Instance ID : uuid:65e7b4c9-3938-4fed-90e5-c6e375049512 Derived From Document ID : xmp.did:fc89500f-c276-474e-87e1-d3c2e6e4b4f6 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:EC6503392222E611858183CCFE141F95, xmp.iid:4ff738a0-58c5-894c-b360-2a2e84c2017a History When : 2016:05:25 15:03:40+08:00, 2016:08:04 11:25:08+08:00 History Software Agent : Adobe Illustrator CS6 (Windows), Adobe Illustrator CC 2014 (Windows) History Changed : /, / Manifest Link Form : EmbedByReference, EmbedByReference Manifest Reference File Path : C:\Users\liuww\Desktop\11.psd, C:\Users\liuww\Desktop\qsg.psd Ingredients File Path : C:\Users\liuww\Desktop\11.psd, C:\Users\liuww\Desktop\qsg.psd Startup Profile : Print Has Visible Overprint : True Has Visible Transparency : True N Pages : 1 Max Page Size W : 226.998389 Max Page Size H : 137.001285 Max Page Size Unit : Millimeters Font Name : Gotham-Book, Gotham-Bold, ArialMT, Arial-BoldMT, MyriadPro-Regular, MyriadPro-Semibold, MyriadPro-Bold, MyriadPro-LightSemiExt, OpenSans, AdobeSongStd-Light Font Family : Gotham, Gotham, Arial, Arial, Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro, Open Sans, Adobe 宋体 Std Font Face : Book, Bold, Regular, Bold, Regular, Semibold, Bold, Light SemiExtended, Regular, L Font Type : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type Font Version : Version 2.200 Pro, Version 2.200 Pro, Version 5.06, Version 3.00, Version 2.037;PS 2.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 2.037;PS 2.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 2.037;PS 2.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 2.037;PS 2.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 1.10, Version 5.016;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168 Font Composite : False, False, False, False, False, False, False, False, False, False Font File Name : Gotham-Book[2]_3.otf, Gotham-Bold_0.otf, Arial_3.ttf, ARIALBD_1.TTF, MyriadPro Regular_0.otf, MyriadPro Semibold.otf, MyriadPro Bold_0.otf, MyriadPro LightSemiExt.otf, 629A55A7E793DA068DC580D184CC0E31_0.TTF, AdobeSongStd-Light.otf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE Black 7 C, PANTONE 200 CVC, PANTONE 186 C, PANTONE 185 C Swatch Groups Colorants Tint : 100.000000 Swatch Groups Colorants L : 43.137249 Swatch Groups Colorants A : 61 Swatch Groups Colorants B : 28 Swatch Groups Group Name : 明亮 Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000000 Swatch Groups Colorants Magenta : 90.000000 Swatch Groups Colorants Yellow : 0.003100 Swatch Groups Colorants Black : 0.003100 Producer : Adobe PDF library 11.00 Trapped : False GTS PDFX Version : PDF/X-4 Page Count : 11 Creator : Adobe Illustrator CC 2014 (Windows)EXIF Metadata provided by EXIF.tools