TTE Technology 50D1400 LCD TV User Manual 50D1400 MS6488 v2

TTE Technology, Inc. LCD TV 50D1400 MS6488 v2

User Manual

MODEL: 50D1400
Homepage1213APPS...........................................................................................................................................................................................................................................................................................................................TV.................................................................... .............................................................GOLIVE........................................................................................................................15151516171718Picture........................................................................................................................Sound ........................................................................................................................Channel......................................................................................................................Time...........................................................................................................................Settings.......................................................................................................................Lock............................................................................................................................8899Choose Your ConnectionsNetwork ConnectionsNetwork SettingsChapter 4:System Settings MenuChapter 5:Special FunctionChapter 6:Other Function21Troubleshooting ................................................................................................................................. ....................................................................................................................Problems and Solutions1920 .......................................................................................................................................Multimedia1411
4 pcs of type M6 screws are required for installing the wall mount bracket to your TV.
/OK/OKFCC lnformationThis equipment has been tested and found to comply with the limits for aClass B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designedto provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which.detcennoc si reviecer eht Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions:(1) This device may not cause harmful interference,and(2) This device must accept any interference received, including interference thatmay cause undesired operation.Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
miniPRPBYLR ININ Sockets(input)sockets(output)LANLANThe IN can recognize if the device you’re connnecting to sockets.The sockets provide excellent picture quality because the video is separated into three separate parts.The L and R socket be used to connect a range of equipment,including videorecorders,camcorders,satellite receivers,DVD players,or games consoles.The socket provides composite Video&Audio connection.YPBPRYPBPRYPBPROPTICAL OUTOPTICAL OUTEARPHONE socket(output)
6 IntroductionRemote Control FunctionsMost of your television's functions are available via the menus that appear on the screen. The remote control(s) supplied with your set can be used to navigate through the menus and to all the general settings.Notes: - Figures and illustrations in this operation manual are provided for reference only and may differ from actual product appearance. - The remote control(s) supplied with your set may differ depending on the model. Refer to corresponding remote control functions below according to your actual remote control(s).(POWER button) Turns the TV on or standby.TV Accesses the TV mode.SOURCE Brings up the SOURCE menu.0-9 (Numeric buttons) Enters channel numbers.Goes to the YouTube homepage.VOL +/- (VOLUME UP/DOWN) Increases or decreases the TV's volume.(MUTE button) Turns the volume off or on.(HOME button) Goes to the smart TV homepage.CH +/- (CHANNEL UP/DOWN) Scans up or down through the current channel list.Goes to the homepage.Note: This button may be for some models and goes to the Golive homepage.Goes to the browser homepage.(SETTING button) Brings up the main menu or press to return to the previous menu.Zoom -/+ Press to select the desired screen format.Note: This function is not available in USB mode.▲▼◄► (Up, down, left and right direction buttons) Highlights different items in the menu system and adjusts the menu controls.OK When in the menu system, your selection or changes settings.(BACK button) In menu mode, goes back to the previous menu or interface; in TV mode, goes back to the last viewed channel.EXIT Exits the menu system.INFO Displays the status information of the current program or source.USB Goes to the multimedia in USB. (OPTION button) Shortcut to Freeze, PVR Disk, PVR (only available in DTV mode), Football Mode, HDMI 2.0 (only available in HDMI mode), Channel List, and Settings.EXITSLEEPPICTURECH LISTMTSSOUNDZOOMZOOMVOL CH0896352GUIDEINFOUSBFAVSOURCE41TVCCRC311S7
7 IntroductionEXITSLEEPPICTURECH LISTMTSSOUNDZOOMZOOMGUIDEINFOUSBFAVCCRC311S Notes about using the remote control• Aim the remote control towards the TV remote sensor window. The remote control will not function properly if there are obstructions between the TV and the remote control.• To ensure good performance, replace the batteries immediately if the remote control is not functioning normally because the battery is running down.• Never mix battery types or combine used batteries with new ones.• When the batteries are low, battery acid may leak and damage the remote control. Once the batteries are low, replace the batteries as soon as possible.• If the remote control is not to be used for a long time, remove the batteries to avoid the leakage of battery acid.• Keep the remote control in dark, dry places. Batteries shall not be exposed to excessive heat such as sunshine, or the like.SLEEP Repeatedly press to set the TV to turn off after a given amount of time. To cancel the sleep timer, press until Off appears.GUIDE Toggles the Electronic Programme Guide between on and off.Note: This function is not available in this model.FAV Brings up your favorite channel list.Note: You should set your favourite channel(s) For details, refer to Channel Edit.CH LIST Displays the channel list menu.Colored buttons (RED/GREEN/YELLOW/BLUE) Performs the corresponding function indicated at the bottom of the screen.PICTURE Selects picture mode.SOUND Selects sound mode.CC Brings up the closed caption menu.MTS Toggles through the MTS (multichannel television sound) settings.Note: MTS is only available in TV mode and the options available may vary depending on the channel’s signal.(Previous) Goes to the previous chapter.(Stop) Stops viewing.(Play/Pause) Starts, pauses or resumes viewing.(Next) Goes to the next chapter.Searches backward.Searches forward.Note: The above six buttons can be used for playing music, pictures and videos in the USB menu.
8
9ATSC)YPBPR
Network SettingsAfter you connect your home network to the TV, follow TV.Press the button on the remote and then select TV > Settings > Network. Your TV set supports both wired and wireless network connection.Note: For wired network connection, you need to insert Wired: Press OK to enter. You can set IP address either DHCP or Static. - Set IP Address DHCP: Press OK to get the IP address. - Set IP Address Static: Press OK to enter and then input info about IP, NetMask, Gateway, and DNS.input characters, press ▲/▼/◄/► to select numbers, and press Return after choose. . Wireless: Press OK to enter. You can search for all available wireless networks and select one from them, or manually input info about the SSID of your network. You can also check the status of your wireless network. - Wireless On: Choose Bass station to search for After the searching is complete, select an accessible wireless network to connect. For some wireless network, you need to input the right password to access. -Wireless input: Choose Bass station to enter and then press ▲/▼ to choose other (Hidden Wireless) -Wireless Status : Press OK to display the info about the status of your wireless network.Netflix Setting: Press OK to enter. You can deactivate the ESN (electronic serial number) of this TV set.Note: For some models, the option is not available. - Deactivate: Press OK to enter, press ◄/► and then press OK to deactivate the current Netflix account on the TV. Connections and Setup10NetworkWiredWirelessSelect ReturnConfiguration:DHCPIP 0.0.0.0Netmask 0.0.0.0Select ReturnWireless:OnBase StationMAC AddressReturnGateway 0.0.0.0DNS 0.0.0.0OKBase Stationoffice-2.4GReturnDisconnect Refresh View DetailSelectConfiguration:StaticIP 0.0.0.0Netmask 0.0.0.0Select ReturnGateway 0.0.0.0DNS 0.0.0.0OKSelectToall available wireless networks. This may take a fewseconds. CH Return
Connections and SetupInitial SetupInitial setup involves selecting all the settings required to be able to search for and store all the channels you can receive. Make sure that the television is switched on Initial Setup menu appears, which guides you through the initial setup process. Press OK to enter.Step 1 Select LanguagePress ▲/▼ to select your preferred language for the menu system, and then press OK to enter the next step.Step 2 Select LocationPress ▲/▼ to select your location: Home or Shop and then press OK to enter the next step.Step 3 Agree to DisclaimerPress ▲/▼ to select I agree and then press OK to enter the next step.Step 4 Set up NetworkPress ▲/▼ to select Setup and press OK the network. For details, refer to Network Settings on page 9. You can also select Skip to skip this step and perform network settings later.Step 5 Select TunerPress ▲/▼ to select Antenna or Cable and press OK to enter the next step.Step 6 Scan for ChannelsPress ▲/▼ to select Scan and press OK to start the search automatically. All available TV channels are stored. This operation takes a few minutes. The display shows the progress of the search and the number of programs found. You can also select Skip to skip this step and perform channel scan later.Note: To prevent the channel setup process from being interrupted, wait for the message indicating that the setup is complete.During the setup, user can follow the hint available at the bottom of the screen to return to the last step by pressing ◄, or press EXIT to interrupt the search halfway. Initial Setup CompleteAfter initial setup is complete, press OK to exit. The channels are arranged in a preset order. If you wish to skip channels, or organize channels, press SETTING to display the main menu, select Channel > Channel Edit and press OK to enter.11
Homepage -Remote Control: A smart phone can be used as a remote control unit to operate TV after they are connected with TV via wireless network. -Help: Brief introduction about the features and usage of functions under nScreen. -About: Brief info about the client software.Note: To use the function, both the smart TV and smart phone should be connected to the same wireless network. Some smart phones and Android systems won't be supported.Wireless DisplayYou can use the screen mirroring function and enjoy sharing the content of your device (computer, smart TV. Operate according to the on-screen instructions.App StoreMany useful and entertaining apps are available for using. After entering the App Store, you will see the recommendations. Press to select, press OK to enter. You can also search for apps by category. Press category on the top, and the press OK.nScreenPlease download and install the client software my nScreen for my nScreen to your smart phone with operate according to the prompt on the smart phone and the TV screen. The options are as follows: -Media Sharing: After a smart phone is connected played on it.Note: Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. And for some models, certain options are not available.You can select all the features from homepage.1. Press to display homepage.2. Press to select icons from the screen list.3. Press OK to enter each option.4. To exit the menu, press .Homepage contains 3 parts: APPS, TV and GOLIVE. Use ◄/► to switch among the 3 parts.WARNING:• • Slow responses and/or interruptions may occur, depending on your network conditions.• If you experience a problem using an application, please contact the content provider.• According to circumstances of the contents provider, an application’s updates or the application itself may be discontinued.• Depending on your country’s regulations, some applications may have limited service or not be supported.Using Homepage - APPSAPPS/ TV/ GOLIVE:Use ◄/► to focuson each item.App StoreWireless DisplaynScreenStatus:Network StatusPre-installed AppsChapter 312Wireless DisplayAPP Store nScreen Crackle
-You may need a webcam to achieve some of the above functions. Webcam is not a standard accessory, you may need to buy separately. Some external devices like webcam, smart phone, game handle and external wireless adapter may not be supported.Pre-installed AppsThese are recommended apps. Highlight an app and press OK to open it.Notes: -The pre-installed apps or items cannot be deleted. And the apps (regardless of order) listed in the some models, certain apps are not available. HomepageUsing Homepage - TVNote: Some options may not be available for certain signal sources. Some options may appear on the next page, you can press ◄/►to switch.APPS/ TV/ GOLIVE:Use ◄/► to focuson each item.TV WindowSettingsFavoriteSourceSettingscustomize your TV settings. For details, refer to Chapter 4: System Settings Menu.FavoriteDisplays the list of your favorite channels. Notedetails, refer to Channel Edit on page 15.TV windowDisplays the current selected TV broadcast program.SourceInclude HDMI1, HDMI2, HDMI3, AV, YPBPR, Multimedia,Cable TV and Antenna TV. Press to select your desired source, and then press OKNote: The available source might differ depending on the model. MultimediaCable TVCable TVAntenna TVAntenna TVSettings Favorite13
Using Homepage - GOLIVEGoLive is a revolutionary international video entertainment platform that delivers a diverse selection of content from all over the world to virtually any connected TV, phone, tablet, or box. Our unique technology ensures an optimized viewing experience that is adapted to suit a range of Internet speeds, broadcasting high-quality streams of the programs and events you want on whatever device you choose, whichever country you are in.APPS/ TV/ GOLIVE:Use ◄/► to focuson each item.Note: The information displayed will be updated periodically.14MoreHomepageMore
System Settings MenuUsing Menu SystemThis section explores the system settings menu of your TV. Each menu is outlined and detailed to help you get the most from your TV. Please note that some function might be unavailable in certain input source. To access the menu system: 1. Press on remote control to display the main menu.Note: If you are using RC311S, you can press on the remote control and select Settings and then press OK.2. CHANNEL , PICTURE, SOUND, TIME, or then press OK to enter the submenu.3. press OK to open the corresponding submenu or activate a setting.4. To return the previous menu, pressTo close the menu, press EXIT.Note: Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. And for some models, certain options are not available.PictureThis menu allows you to adjust each option to obtain the best picture settings according to your preference, the type of program of you are watching and the ambient lighting. Press to display the main menu and select Picture, then press OK Picture options are as follows: Note: Some options may be not available for certain signal sources.Picture ModePress OK to enter, and then press ◄/► to select a picture mode: Dynamic, Standard, Movie or User.Note: Picture Mode may be automatically set to User if you make any adjustment to the following picture options.Chapter 415 Gamma Sets the shape of the Gamma curve. Use lower Gamma values for bright ambient lighting, and higher values when it is dark. Color Temperature Adjusts the color temperature of the picture. Press ▲/▼ to select the color settings: Cool for a more blue palette of picture colors; Warm for a more red palette of picture colors. Note:For some models, the Color Temperature option is not available.: Noise Reduction: Improves the quality of the picture in the case of poor reception. Press to select off , Low, Middle, High, Auto.SoundThis menu allows you to adjust each option to obtain the best sound settings to optimize audio output.Press to display the main menu and select Sound, then press OK Sound options are as follows:Picture Mode StandardContent TypeColor ExtenderMotion EnhanceGammaColor TempertureAspect RationNoise ReductionDynamic Contrast Content Type Press OK to enter,and then press ▲/▼ to select Video,PC and Game. Color Extender Press OK to enter, and then press ▲/▼to select ON, Off or xvYCC. Using xvYCC source, the TV system will into this option automatically. The signal will be in a primal form and then the PQ system will not change. Motion Enhance Press OK to enter,and then press ▲/▼ to select Off,Low,Middle and High.Sound Mode StandardBlanceAuto VolumeSPDIF ModeDefault Audio LanguageDefault MTS/SAPSPDIF DelaySOUNDPICTURESETTINGS, LOCK,▲/▼Dynamic Contrast: Adjusts the contrast automatically.Press ◄/► to select On or Off. Aspect RatioPress OK to enter, and press ▲/▼ to scroll throughthe picture mode settings: AUTO, 4:3, 16:9, Just Scan.Note: Some options may not be available for certainsignal sources.
System Settings MenuThis option is used to control the type of audio stream sent to the Digital Audio Output (SPDIF) socket. Press to select Auto or PCM. This option is used to synchronize the sound with the picture. If the sound is slower/quicker than the action of the picture, you can press ◄/► to turn down/up the numerical value. ChannelTV for DTV/ATV channels using the Initial Setup menu. If you did not do this or if your setup has changed, you can do this from this menu.Press to display the main menu and select Channel, then press OK to confirm. The Channel options are as follows:BalancePress ◄/► to balance the sound between the left and right speakers.161. Select Channel > Channel Edit and press OK to display Channel Edit menu. 2. Press ▲/▼ to select the channel as your desired, then press the RED button on the remote control to set your favorite channel or the green 3. Press Return to return or EXIT to close the menu.Turner AntennaAuto ScanDTV Manual TuningATV Manual TuningChanel EditCHANNELOKStandardAuto VolumePress ◄/► to select On/Off.
System Settings MenuTimePress MENU to display the main menu and select Settings, then press OK options are as follows:Press OK to enter and then to select English or Español.Note: For some models, the Spanish option is not available.Sets the location of your TV. Press OK to select Home or Shop.17This menu allows you to set the time zone on your TV set, to program an automatic turn-off or wake-up timer. Press OK to enter. The options are as follows:Auto Sync OnClockSleep TimerTime ZoneDaylight SavingOff TimeTIME01:18Menu Language EnglishLocationRestore Factory DefaultNetworkT-LinkSoftware UpgradeSettingsNetflix SettingNote: The options available vary according to the value of Time Zone Mode. Region 1 to Region 5 represent Fernando de Noronha, Northeast, South and Southeast, North, and West respectively.SETTINGSClosed Caption▲/▼ to chooseClosed CaptionMany programs are encoded with closed captioninginformation, which allows you to display the audio portion of a program as text on the TV screen.Note: Closed captioning is not available on all channels.The options are as follows:Enable Caption: Press ▲/▼ to select a mode: CC Off, CC On or On When Mute.• CC Off: No captioning information displayed.• CC On: Captioning information always appears, when available.• On When Mute: Displays captioning information, when available, whenever the TV’s sound is mutedby pressing MUTE button. The captioning informationis not displayed when the sound is not muted. Press ▲/▼ to select the local zone (Newfoundland,Atlantic,Eastern,Central,Mountain,Pacific,Alaska,Hawaii,Samoa.).Time ZoneSettingsNote: The default password is“0000”.And “0812” is the superpass word.If you forget your password,enter it to overrideany existing ones.
System Settings MenuLockThis menu can control the special function for TV channels. 18Lock SystemLOCK This option allows you to change the password. Press OK to enter, then press the numeric button to enter the old password, and then the new password twice.Change PasswordT-LinkThis enables the TV set and your CEC devices (e.g. DVD) to turn on/off or auto standby synchronously.Press OK to enter. The options are as follows:- T-Link Enables the T-Link function. Select On to enable this function.Note: The options TV Auto Power and Auto Standby below are only available when T-Link is set to On.- TV Auto Power Enables the TV to automatically power on when you power on CEC device (e.g. DVD) with the device’s remote. Select On to enable this function.- Auto Standby Enables all CEC devices to automatically go to the standby mode when you turn off the TV with the TV remote. Select On to enable this function.Lock SystemLOCKOffChange PasswordUSACandaRegion Rating Table SettingRegion Rating Table ResetBlock Unrated TV Lock SystemPress OK to enter and choose On and Off. USAPress OK to enter and choose TV Ratings and MPAA. Region Rating Table SettingPress OK to enter and set the region rating table. Region Rating Table ResetPress OK to reset region rating table. Block Unrated TVPress OK to enter and choose On and Off.Note: The default password is“0000”.And “0812” is the superpass word.If you forget your password,enter it to overrideany existing ones.
Special Functionthe control menu and then press ▲/▼ to go to the previous or next music and press OK to play it. 3. Press to show or hide a control menu at the bottom of the screen. Press ◄/► to select buttons on the control menu, and press OK to confirm. The control menu includes Play/Pause, FB., FF., Previous, Next, Sound, Mode, Info, and Return. 4. To exit the current music and return to the previous menu, press My Picture1. Select > My Picture, and press OKconfirm. Press ▲/▼/◄/► to select a disk and press OK.2. Press ▲/▼/◄/► to highlight one piece of picture and press OK to display it. When the picture slide shows, press ▲/▼ to switch to the previous or next picture. 3. Press to show or hide a control menu at the bottom of the screen. Press ◄/► to select buttons on the control menu, and press OK to confirm. The control menu includes Play/Pause, Previous, Next, Rotate, Zoom, Volume (only available when Music is turned on), Picture, Music, Mode, and Return.4. To exit the current picture and return to the previous menu, press My Browserand pictures available in your connected USB device. Select > My Browser, and press OKOK to to return to the previous menu.view photos, listen to music or watch videos stored on a USB storage device.Picture: JPEG/PNG/BMPMusic: MP3/AC3/HE-AAC/LPCM/WMAVideo coding format: H.264/H.265/MPEG 2/MPEG 4/VC1Notes: - Some USB keys and USB products like digital cameras or mobile phones are not fully compatible with USB 2.0 standard so it may not work with the TV multimedia player.1. Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the TV.2. Press , press ▲/▼/◄/► to select TV > Multimedia and then press OK. Or press USB on the remote control.The menu contains four submenus: My Movie, My Music, My Picture, and My Browser.My Movie1. Select > My Movie, and press OK to confirm. Press ▲/▼/◄/► to select a disk and press OK.2. Press ▲/▼/◄/► to highlight one piece of video and press OK to play it. When the video is playing, press the VOL+/- button to adjust the volume, press ▲/▼ to go to the previous or next video. 3. Press to show or hide a control menu at the bottom of the screen. Press ◄/► to select buttons on the control menu, and press OK to confirm. The control menu includes Play/Pause, FB., FF., Previous, Next, Mode, Picture, Zoom, Info, Volume, Sound, and Return. 4. To exit the current video and return to the previous menu, press . My Music1. Select Multimedia > My Music, and press OK confirm. Press ▲/▼/◄/► to select a disk and press OK.2. Press ▲/▼/◄/► to highlight one piece of music and press OK to play it. The list of music is displayed on the left. When the music is playing, press the VOL+/- button to adjust the volume, press to hide Chapter 5MultimediaMultimediaMultimediaMultimedia Multimedia..19
20Other Information5. The video from a mobile hard disk (USB) is playing with no sound. -The audio format of the video in your mobile hard disk is not supported by the TV player.6. Some videos fail to play. -The formats of the videos may not be supported by the TV, especially videos shot by certain kinds of cameras, generally with their private protocol of formats, which are not compatible with your TV.7. Video stops playing midway. -Mistakes may occur when videos are copied or compressed, so they may automatically stop playing during playback.8. What should I pay attention to, when I do SW updating? -No power cuts when SW updating; -Avoid any operations with your remote control when SW updating; -Depending on your internet connection speed, the software updating process may take some time.9. There are no distinct changes of TV interface after SW updating. -Under certain conditions, SW updating may not only update or add new functions but also improve the performance of the TV set, without distinct changes of interface. Also, there may be no changes to the user interface at all.10. What should I do when SW updating process stops due to a sudden power-off? -If you do SW updating by USB, do not pluck the USB from your TV, and restart your TV to continue SW updating; If you do SW updating by Network, also restart your TV and check if it is well functioned.11. With a USB device being inserted into the TV in advance, I am prompted that no USB devices are detected after I access Media, why? -There may be something wrong with your mobile hard disk(s), damaged or with low voltage. You could increase power supply by inserting the two plugs on one end on the USB wire into TV's USB port simultaneously.12. External device cannot be recognized. -Some external devices (e.g. webcam, smart phone, tablet, game handle, and external wireless adapter) may not be compatible with the TV and cannot be supported for certain functions (nScreen, wireless display, gesture control, face recognition, if any). Please try a similar device. If it does not work, contact your local dealer.1. Fail to link to the network. -Check if your TV is connected with the network; -Reboot your TV; -if access of your router is supported. Refer to the operation manual of your router, and activate its DHCP function after linking the network to your TV. -Make sure your TV is connected to a router, and make sure your router is powered on. Check that your router/modem has an internet connection, and that your Ethernet cables/wireless connection is OK. Test your connection with a computer to make sure it is OK. Should the problem persist, contact customer service.2. How to use the wireless USB adapter? -When connecting to wireless network, inserted the wireless USB adapter into your TV's USB port, it will work together with your wireless router. For details, please refer to Network Connection.3. The video could not be played smoothly. -the supported formats of this TV set. -Videos downloaded from internet, or online videos.a. It may be caused by the lower bandwidth of your network. A high network speed is required to handle online videos.b. Peak internet usage times may affect the bandwidth.c. Check if any other computers on the same network are also operating, as they may be using up bandwidth. Especially if they are downloading or displaying on-line videos.d. The video may not be smooth itself, it is not the problem of your TV or network. may consider some content inappropriate for unsupervised viewing by children aged 8-13. Violence aggression will be limited and moderate; may include physical, fantasy, or supernatural violence. Other Content Guidelines: May contain infrequent mild profanity, or mildly suggestive language. Could also contain brief scenes of nudity.4. When two mobile hard disks are connected with the TV at the same time, they will not be recognized some times. -All mobile hard disks consume a lot of power, which may result in power supply problems. We recommend inserting only one hard disk, or a low power consumption mobile hard disk.Problems & SolutionsNote: Problems & solutions 1 to 2 are for the TV models which have network functions, so users of non-connected TV models can disregard them.Chapter 6
21 Other InformationTroubleshootingMost problems you encounter with your TV can be corrected by consulting the following troubleshooting list.Snowy dots and interferenceIf the antenna is located in the fringe area of a television signal where the signal is weak, the picture may be marred by dots. When the signal is extremely weak, it may be necessary to install a special antenna to improve the reception.1. Adjust the position and orientation of the indoor/outdoor antenna.2. Check the connection of antenna.3. Fine tune the channel.4. Try another channel. Broadcasting failure may happen.IgnitionBlack spots or horizontal streaks appear, or the picture from car ignition system, neon lamps, electric drills, or other electrical appliance.GhostGhosts are caused by the television signal following from tall buildings, hills, or other objects. Changing the direction or position of the antenna may improve the reception.Radio frequency interferenceThis interference produces moving ripples or diagonal streaks, and in some case, loss of contrast in the picture. Find out and remove the radio interference source.* To bring you better visual experience, please remove all labels from TV front panel and screen before use.No picture, no sound1. Check if the fuse or circuit breaker is working.2. Plug another electrical device into the outlet to make sure it is working or turned on.3. Power plug is in a bad contact with the outlet.4. Check the signal source.No color1. Change the color system.2. Adjust the saturation.3. Try another channel. Black-white program may be received.Remote control does not work1. Change the batteries.2. Batteries are not installed correctly.No picture, normal sound1. Adjust the brightness and contrast.2. Broadcasting failure may happen.Normal picture, no sound1. Press the VOLUME UP button to increase volume.2. Volume is set to mute, press the MUTE button to restore sound.3. Change the sound system.4. Broadcasting failure may happen.Unorderly ripples on the pictureIt is usually caused by local interference, such as cars, daylight lamps and hair driers. Adjust the antenna to minimize the interference.Base InstallationTo fix the double support base on the unit by screw,the installation is completed.72-50D14A-E88Z1

Navigation menu