TYT ELECTRONICS DMR2 DMR Digital Transceiver User Manual MD 2017

Download:
Mirror Download [FCC.gov]
Document ID	3422042
Application ID	BYeDcqFtdKicVf9D01qsIQ==
Document Description	user manual part2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	472.71kB (5908850 bits)
Date Submitted	2017-06-12 00:00:00
Date Available	2017-06-14 00:00:00
Creation Date	2017-06-02 14:06:48
Document Lastmod	2017-06-02 14:06:51
Document Title	MD-2017_User Manual
Document Creator	Doro PDF Writer [2.03] [http://j.mp/the_sz]

Logout Emergency Mode
The walkie talkie wiii logoul emergency mode when any of the foliowing situations happen
- Confirm with the received emergency caii. or
- Meet with the max emergency caii. or
- press the prerprcgremmed emergency off key, or
' Prese[P'|'|'Jkey.
Notice: Emergency mode win he iogout when power off the walkie taikie. Radio win not unde
emergency mode when the radio is power on next time
Menu operation
Settings
Menu operation
Character Input
Users can use the 3 x 4 alphanumeric keypad to access the radio‘s function When you're
Using the keypad to input a user alias or text messages, waikie-talkie input contains three
modes: 1, English letters mode, 2, chinese input mode, 3, digital input mode. When using
the keypad input D. you can only select the digital mode
English Typing:
Users have to press a button severai times for getting some characters The tottcwmg table
shows how many times needed to press a button to get the required character.0
Button
2345678910111213
%- ‘#
-o-
in
at
-Ua—tanmd
xcaJXImU
Nmmmwbumq
muggeou>
Ecflszmm®
x, it is indicating the ongoing ot
radio detection. The LED indicator light is red
6 Waiting for Confirmation
7. lithe target radio is active in the system , then it makes a prompt sound, screen will show
that target two way radio has responded shortly
Or it the target radio in the system is not active, then it makes a prompt sound, screen will
show that target two way radio has no answer shortly.
3 Two way radio returns to user alias or lD screen. It you press [m ] when waiting tor con-
firrnation, made a prompt sound, two way radio will end all retry and exit the two way radio
detection mode.
Monitor
Using monitoring tunction to open the target two way radiois microphone (only the user alias
or ID). You can use the tunction to monitor any sound around target two way radio.
Your must allow your two way radio to use this function by programming it
Start Monitor
Using the Menu:
1. Press [an] to enter the Menu
2 Move ["or]to Contactsthen press [in] to select
3. Move ["or] to The required user alias or lD, then press [can] to select
in
Or mnve[--or] key to manual dialing. and then press [in] key to select
if there are any calling ID remains heiore. radio shows the ID and along With the iiashing cur-
sor. using the keyboard to edit the ID. press [my] key to choose
Or move[--or] key to manual dialing. and then press [can] key to select lnputting the
user alias or ID. and then press [OK] key to select
4. Move ["or] to select Remote Monitor then press [can] to select
5. When two way radio makes a prompt sound. LED light turns green.
6 Waiting ior coniirmation
7 Screen displays Monitor successed.
Or screen displays Monitor failed
if success. two way radio began to receive voice signals from the radios which are being mo-
nitored voice and screen displays two way radio are moniting. until the end oi the duration oi
the preprogrammed. two way radio made a prompt sound. and the LED light puts out, screen
display that monitoring ends
it iaiied two way radio Repeats until reach the preprogramrned attempts
Contacts setting
Contacts ls "address book" for handheld two way radio. Each entry corresponds to an alias or
D used to start the call. in addition. each item. according to the dliierent content setting. relate
to three types of call. group calling. single call. all call Your radio support digital address book.
The Contacisi entries display in the iollovnng information
zit
- Contacts
- New Contact
‘ Manual Dial
Note: you can add. delete. edit Contacts person in the digital address hookicontacts)
Group Call With Contacts
1. Press [in ] to enter Menu
2 Move [nor] to contacts. then press [train] to choose. entries arrange in alphabetical
order
3. Move [not] to required calling group's alias or D.
4. Holding the radio and let it in a vertical position and keep mouth 1 to 2 inches (2 5 to 5.0
cm) with radio.
5. Press [PTT] to start calling. the LED turns red. The screen displays the calling group‘s alias
or lD.as well as icon of group call
6 Releasing (PTT) button to receive. when any user response Within the group. the LED light
turns green You will see on the screen group call icon oi user‘s ID
7. ifyou enable the "channel Free prompt " tunction. when the target radio release the (PTT)
button. you will hear a short oeep. said this channel is idle. waiting ior your answer. Press
the call key (P'l'l') to answer. it in a preprogrammed group called hang time Without voice
activity. the Call IS ended
in
Slngle Call With Contacts
1. Press [an] to enter Menu
2. Move ["or] to Contactthen press [can] to choose, entries arrange in alphabetlcal
order.
3 Move ["or] to required calling group's alias or lD
Ormove[--or] key to manual dialing, and then press [CED] key to choose ll there ls
a user alias or D called before, radio shows ID and along With the tlashing cursor, using
the keyboard editan this ID.
Or move[or] key to manual dialing, and then press [in] key to choose, using the
Keyboard to enter a new ID
4 Holding the radio and let it in a vertical position and keep mouth 1 to 2 inches (2 5 to 5 0
cm) wtth radio.
5. Press [PTT]to start calling, the LED turns red. The screen displays the calling group‘s alias
or |D,as well as icon otgrcup call
6. Releaslng (PTT) button to receive. when any user response within the group. the LED light
turns green You will see on the screen group call icon or userls ID
7 it you enable the "channel Free prompt " lunction- when the target radio release the (PTT)
button, you wtll hear a short beep, said thls channel ls idle, waitlrtg tor your answer. Press
the call key (PTT)to answer. lf in a preprograrnmed group called hang time Without voice
actlvity, the call is ended.
6. You Wlii hear a sound short. screen shows the call ended
zsl
Note'
lr you releasetPTT) button when you are settlrtg up the call, and when it will exit and return
to the prevtous screen without any remind. Radio can be preorogrammed executive two way
radio are testan before establishing single call. lrtne target radio did not reply, you will hear
a short beep, and screen shows the other radios did not reply. Two way radio return to menu
before starting the radlos amund test.
Call Log
Your radio can record all the recent dialed. received, and not answered call. Use the calling
record functlon View and manage the recent Calls
Checking New Call's Number
Menu Items can show the not answer Call ,recelved Calls and dlaled Call
1 Press [an] key to enter the menu mode
2. Move the[--or]key to the Call Log, and then press [m] key to choose.
3. ane[or]to the required list, and then press [can] key too choose.
4. The screen an the top of the list shows the recent entries.
5. Press [or]check list, press (Pm at the current selected aliases or ID to start a call.
Missed Call
Whenever you miss call, two way radio will display a not answered call, select view or view
later.
us
Note'
if you press (FTT),when you're viewing missing call number, radios will exit the missing
call screen and establishing a single call again.
1 The screen shows the missing call, and the missing call‘s number and View.
2 Press [can] view missing call’s ID. missing cail's record list displayed on the screen.
Press [m l to store or delete this entry: Or move ["or] key to view later. and then
press [Eu ] key choice, return to the main screen
Storing Missed call's Alias Or ID
Press [an] key lo enter Menu
Move the ["or] key to Call Log, and then press [m] key to choose
Move the[--or]key to missed call, and then press [m] key to choose.
Move [nor] key to missed call's alias or ID. and then press [can] key to choose
Move the ["or] key lo store. and then press [can] key to choose
Radio Shows flashing cursor, if needed. enter the ID alias. and then press [can] ey.
\imuibwru.‘
The screen Contacts have been saved
You can also enter ID without alias
Deleting Calling Log's Record
1 Press [an] key to enter the Menu.
2 Move the [not] key lo Call Log and lhen press [up] key to choose.
3 Move the[--ol]key lo missed call. and then press [all] key to choose.
YII
4 Move [nor] key to missed calls alias or ID, and then press [Em] key to choose
5. Move ["or]key to delete the entriesthen press [CED] key to select if you need to
delete this entry.
6. Select “yes" .lhen press [in] key lo delete lhe entries, screen appears entry deleted;
Or select "no" ,press [my] key to return to preVious screen
When you select a call lisl out there is no entry in, lhe screen will display the list is empty.
if the keyboard is open at this time, Will be a low tone hint sound
Call Alert Operation
Call alert makes you can suggest a specific radio users in the possible time to call you
back.
This feature applies only to the user alias or ID. and can be used through the menu by ad-
dress book or manual dialing.
Receiving And Checking Call Alert
When you receive a call alert, screen shows call prompt. alternating transmit radio's
alias or lD
1. YOU Will hear sound oi repeat, LED light turn and shine red.
2. Then press and release [PTTJ to confirm the prompt. or press [can] to select “neglect" to
exit the call reminder
Starting Call Alert From Contact List
1. Press [an] key to enter the Menu.
2. Move the [nor] key to Contaels, and lnen press [m] key to choose.
3. Move[or]key to missed caii's alias or ID, and then press [m] key to choose
Or move [or]key to manual dialing, and then press [m] key to choose, a flash-
ing cursor appears,then enter the user D you want to call, and then press [an] key.
4. Move[--or] key to Call Alert, the screen display Call Alert < user 5 alias or ID >,and
then press [m] key and instructions have been sent Call Alert.
5. When the radio send call alert, the LED indicator for the red light
6. if you receive calls prompt Confirmation, issued a prompt, and display the call alert sneer
ess
0r prompt conlirmation if not received a call, send a hint sound, and the screen call tailure
Messages Function
Your radio can receive data, such as lrom another radio sent text messages, message or a
maximum length of 144 characters, whole message is not longer than 50 lines.
Edit And Send SMS
Using the Menu
1. Press [my] key to enter the Menu.
2. Move the [nor] key to Messager, and then press [my] key to choose.
3. Moveior] key to write, and lnen press [m] key
”I
4. A flashing cursor appears, using the keyboard to input messages, press [-1 key to
move to the left one, press [-1 button to the right one, when editing area have content,
press the [cm] key to deiele any useless character, otherwise when editing area Wilnout
content to return to the higher level menu
5 After writing the text, press [ml] to choose to send or save
6. When on the process or editing, user can choose by pressing the [CED] key to empty
option to empty all the content or the editor, quickly return to the higher level menu.
7. Choose the ["or] key lo the alias name or D, and then press [in] key to select.
Or pressi-spending] key to manual dialing, and then press [in] button, enler your user
ID and press [in] key.
a The screen shows message < user/group name or D > call, sending message are being
conlirmed
9. it the messages sent successfully, issued a prompt sound, and the screen displays text
message has been sent
Or if the message was not senl. issued a high lone hinl sound, and screen displays text
message sent tallure. It message sent tallure, radio will return to Chance to return to the
retransmission selection screen
Send Quick Text
Two way radio support maximum 50 programming of preiahrieated text messages by lrie
agent
When a predefined text message, you can edit every message betore you can send each message
In
Using the Menu
1 Press [m] key to enter the Menu
Move the[--or]key to Messages, and then press [can] key to choose.
Move [nor] key to Quick Text, press [m] key to choose
Move[--or] key to the required quick text,press [m] key to choose
A iiashing cursor appears. using the keyboard to input messages. press [-1 key to move
«liberate
to the left one, presS[-]button to the right one, when editing area have content ,press
the [my] key to delete any useless character, otherwise when editing area without con-
tent to return to the higher level menu
6 Atterwriting the text message, press [m] to choose to send or save
7 If the messages sent successfully, issued a prompt sound, and the screen displays text
message has been sent.
Or it the message was not sent, Issued a high tone hint sound, and screen displays text
message sent tallure li message sent tallure, radio will return to Chance to return to the
retransmission selection screen.
8 After Choose send move ["or] to the alias or ID, and then press [m] key to choose.
Or move [nor] key to manual dialing. and then press [0 k] key choice. Enter the user
alias or D. then Press [an].
9 The screen shows message: < user/group name or ID > call, text messages were a being
sent to contirm
10. It the messages sent successfully, issued a prompt sound, and screen display text
zit
message has been sent. Or if the message can‘t send, send out a high tone hint sound, so-
reen display message sent failure, failure it the SMS messages. intercom chance to return
to the retransmission selection screen
Send Quick Text With A Key
1. Press Preprogrammedsingle bond calls to a predetined alias or D sends a prefabricated
text messages.
2. The screen displays a text message: < user/group name or in > caii. to confirm text may
ssages were being sent
3 If the messages sent successtully, issued a prompt sound, and the screen display text
message has been sent.
Orif you cannot send text messages, screen display text message sent failure If message
sent failure, intercom chance to return to the retransmission selection screen.
Manage The Failed SMS
In retransmission selection screen, you can choose the tollowing options.
- Resend,
0 Forward,
I Edit
Resending message
‘l Press [m] to resend same message to same user/group name or in
2. ir the messages sent successtully, issued a prompt sound, and display messages sent or
III
if you cannot send text messages, screen display text message sent failure.
Forwarding message
Choose to forward message to another User/group name or lD.
1. Move the [not] key to forward, and then press [any] key choose.
2. Move ["orito the alias name or ID, and then press [can] key to choose.
Or move ["or]key to manual dialing, and then press [m] button to choose, enter
your user l0 and press [can] key.
3 The screen display a text message: < user/group name or D > call, to conlirm text mes
sages were being sent
4 If the messages sent successtuliy, issued a prompt sound, and the screen display text
message has been sent
or if the message was not sent, issued a high tone hint sound, and screen displays text
message sent failure.
Editing messages
Choosing edit to edit message before you edit
Note: if you have a subject line (receive text messages from email program), you can't edit
the subject line.
1 Move[or]key to edit, then press [can] key to choose
2 A liashirig cursor appears, using the keyboard to input messages. press [-1 key to
move to the left one, press [-1 button to the right one, when editing area have content,
press the [m] key to delete any useless character, otherwise when editing area without
content to return to the higher level menu.
3. After writing the text, press [can] choose to send or save
4. When in the process of editing. can choose by pressing the [m] key to empty option to
empty all the content of the editor, quickly return to the higher level menu
5. Choose after[--or] button to send the required alias or i0, and then press [in] key
to choose
or move ["or] key to manual dialing, and then press [m] button, enter your user D
and press [in] key
a Screen displays message; < user/group name or ID > call, to confirm text messages were
being sent
7 it the messages sent successfully, issued a prompt sound, and the screen display text
message has been sent.
or if the message was not sent, issued a high tone hint sound, and screen displays text
message sent iailure.
Manage The Sent SMS
Once a message is sent to another radio, it Will be saved in the "sent items". Send after se-
nding a text message has always been to "sent items" at the top of the list. The sent items
folder can store up to 50 recently send text messages. After the folder is full. the next send
text messages will automatically replace the earlier messages in this lolder.
Note- at any time pressing the [m] key can return to the preVious screen
Check the sent messages
Using the menu l‘unctlon.
1. Press[ an ] button to enter the Menu.
2. Move the [nor] key to Messages , and then press [can] key to choose
3. Move ["or]to sent items, and then press [m] key to choose
A Move the ["or] key to the SMS, and then press [m] key choose. it the message
from the email program, a subject lines, will appear in the top right corner oi the screen
icon indicates State oi SMS
Sending the sent messages
When the view sent messages, you can choose the tollowrng options-
I Resend
I Forward,
0 Edit
' Delete
1 Check the message, press [m] key again
2 Move the ["or] key to resend, then press [can] key to choose
3 The screen displays < user/group name or ID > call, contirm that it is preparing to send
the same message to the same target radio
4 If the messages sent successfully, lssued a prompt sound, and the screen dlsplay text
message has been sent.
Or it the message was not sent, issued a high tone hint sound, and screen displays text
message sent fallure it message sent fallure. intercom chance to return to the retransmls
sicn options screen. Press the [m] key to send SMS weight to the same user/group name
or ID
Note Except for Pessmg the [can] .[--or] key, if you change the volume and the pre—
ss any other key. will return to this message When you press [PTT] for a single call or group
call, or as a response to the group callingradio will exit the retransmission selection screen.
if received text messages or remote sensing information, emergency call, or call the police,
or call reminder, radio will exit the retransmission selection screen
it you press [Pmin response to a single call (in addition to the radio in the show did not
answer the call screen), or at the end of all call. the screen will return to resend seleotlon
screen Press [m 1 key, enter the iorwarding, edit, or delete selection screen.
ochonse forward, will choose the SMS sent to speak to other groups/user alias or ID.
I choose to edit, to edit the Selected text messages before Sending
- choose delete. delete the selected text
Note: it you screen out SMS messages when send text messages. so radios will be in the
"sent items" iolder tor SMS status updates. not the tip or by voice prompt. if the messages
In the Sent items [older stale betore update, walklestalkle pattern Changed or blackout, Wain
kie.talkle will not be able to complete the ongoing message processing, and automatically
start tag to the icon oi iailure This radio can handle 5 text messages at the same time. At
thls stage. the radio can't send a new message. and automatically start tag lcon to send
failure.
tss
Deleting all Sent Messages In the "sent items"
Using the Menu Function
1. Press the [m] button to enter the Menu
. Move the ["or] key to Messages. and then press [in] key choice
. Move ["or]to Sent Items. and then press [can] key choice.
Move the ["or] key to delete all, and then press [can] key cholce
.Wnen it appears to delete messages, press [m] button, select "yes" protect has clear
screen display has been sent.
Or delete the text, mnve[--or]to no, and click [an] key to return to the previous 5ch
een. When you select the "sent ltems" but not one of them text messages. the screen will
0|me
display the list is empty, itthe keyboard is open at this time. will be a low tone hint sound.
Receive SMS
When your radlo are receiving SMS, the left at the screen shows the sender allas or ID
ICONS and text messages
When receive text messages, you can choose the following optlons
. readlng?
- Readlng Later
o delete
Note. when the radio shows tlp on the screen. please press (PTT). two way Wlll exit and to
establlsh a single call or text message screen group call.
TII
Check the SMS
1. Move the [nor] key to Read. And then press [my] key to choose
2. the selected text messages on the inoox opened, if the message is from the email progrs
am. it will appear a sublect line.
3 Click [can] key to return to your inbox
Or press [m] to reply,lorward or delete messages
Move [nor] key to enter later view or delete selectlon screen,
Later. select view screen before returning to receive messages.
Choose delete. delete receive text messages
Manage Received SMS
Use your inbox to manage messages inbox can store up to 50 text messages at Most
Two way radio supports the followlng text options:
- Reply
0 Fem/3rd
o delete
- Delete all
store the message in the lnbox in the order ofrecelved tlme .
Note at any time accordlng to the [m] key can return to the preVlous screen
Check The lnbox SMS
1 Press the [m] button to enter the Menu.
2 Move the[--or]key to Messages. and then press [m] key to choose
3 Move[--or]to the inpox. and then press [mt] key In choose.
4 Move the [nor] key to check the message ll the messages are from the email pr-
ogram, it Will appaer a subject line.
5 Press the [m] key to choose the current text. then press [m] key again to reply, delete,
or torward this message.
Unread messages: . Already read message Q
Reply The lnbux SMS
Use the menu lunctiort:
1. Press [an] button to enter the Menu.
2. Move the [nor] key to message, and then press [can] key to choose
3 Move["or]lo the inbox, and then press [can] key to choose
4. Move the["or]key to the SMs, and then press [can] key to choose. It the mess-
ages are from the email program, it will appear a subiect line.
5. Press again [an] button to enter submenu.
a. Move ["0r]lo reply. and then press [mt] key to choose.
7. Move ["0r]lo write messages, and then press [can] key choice, a flashtng cursor.
using a keyboard editing text messages
Or move [nor] key to prefabricated text messages, and then press [can] key to cho-
ose Choose the required message after press [m] a flashing cursor, it needed, with the
keyboard editing your message.
8 After Writing the text, press [can]
9 The screen displays message - < userr call group name or ID >, to oontirm text messages
were being sent
10. lithe messages sent successfully, issued a prompt sound, and screen display text me-
ssage has been sent.
Or if you cannot send text messages. screen display text message sent taiture. It message
Sent failure, radio return to the retransmisslon Selectlon Screen.
Deleting the inbox messages
Use the menu lunction:
1. Press the [m] button to enter the Menu
. Move the ["or] key to message. and then press [in] key to choose
. Move ["or1to the inbox, and then press [can] key to choose
Move the[--or] key to the SMS, and then press [can] key choice it the messages
Arum
are lrorn the email program, it will appaer a subject line.
. Press again [Em] button to enter submenu.
. Move the [nor] key to delete, and then press [can] key to choose.
. Delete messages move ["or] key to “yes“, then press [can] key to choose.
. Screen appears short message has been deleted
mmwmm
The screen back to inbox
Deleting all messages in the inbox
Use Ihe menu tunclioh'
1 Press the [m] button to enter the Menu
2 Move the[--or]to the Message, and then press [m] key to choose.
3 Move[--or]lo the tnbox, and then press [m] key to choose.
A Move the ["or] key to delete all, and then press [up] key to choose.
5 When it appears Deleting the messages, move ["orisetect yes and then press
[m] key to choose
5 Then The screen ianX was empty already
III
When you select the "inbox“ but not one at them text messages, the screen will display the
list ts empty, ifthe keyboard is open at this time, wtll be a iowtone htnt sound.
Encryption
it you enable this leature, which is beneficial to prevent other users on the channel by using
the method oi software encryption tor unauthorized eavesdropping The launch of signaling
and user identification part unencrypted Your radio must be enabled on the channel encr-
yption function, can send encrypted, even it the receiving transmission is not must request
to do so.
Basic encryption
Two way radio can only be assigned more than one type or ehcn/ptioh ti users Cali tor en-
cryption or decryption of data transmission, must make to be preprogrammed walkie-talkies
and launch radio has the same "encryption keys" (suitable tor basic encryption)
tryour radio to receive dirrerent encryption keys or key values and key encryption catt ID,
you will hear the sound of the transport chaos encryption (basic).
Press the preliminary programming encryption keys on or ofl.
DTMF
Dual Tone Multi-Frequency (DTMF) lunction allows to operate radio when there is interier—
ence in the radio system
To initiate a DTMF call
1 Press and hold [PTT] key.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Modify Date                     : 2017:06:02 14:06:51+08:00
Create Date                     : 2017:06:02 14:06:48+08:00
Metadata Date                   : 2017:06:02 14:06:51+08:00
Creator Tool                    : Doro PDF Writer [2.03] [http://j.mp/the_sz]
Format                          : application/pdf
Title                           : MD-2017_User Manual
Description                     : MD-2017_User Manual
Document ID                     : uuid:f11968b7-042e-4c76-99da-7e4077341ef0
Instance ID                     : uuid:6cd49886-06d0-42b1-8e17-8030b74469ea
Page Count                      : 13
Subject                         : MD-2017_User Manual
Creator                         : Doro PDF Writer [2.03] [http://j.mp/the_sz]

EXIF Metadata provided by EXIF.tools