TYT ELECTRONICS DMR2 DMR Digital Transceiver User Manual MD 2017

Download:
Mirror Download [FCC.gov]
Document ID	3422043
Application ID	BYeDcqFtdKicVf9D01qsIQ==
Document Description	user manual part3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	473.11kB (5913887 bits)
Date Submitted	2017-06-12 00:00:00
Date Available	2017-06-14 00:00:00
Creation Date	2017-06-02 14:07:47
Document Lastmod	2017-06-02 14:07:49
Document Title	MD-2017_User Manual
Document Creator	Doro PDF Writer [2.03] [http://j.mp/the_sz]

2 Enter number you need
You can disable DTMF tone by turning ollr all radlo tone and prompts
Secrecy
You can activate or kill any radio in the system For example, you might want to disable a
stolen radio. to prevent thieves use it, and enable it when you get it back.
Note. radio kill or activation is limited to activate the radios with these functions.
Radio Disable
Use menu mode
1 Press [an] key to enter the menu mode.
2 Move[or]key to Contacts, and then press [can] key to select, entries are in alp-
habetical order
3 Move ["or] key to the requlred alias cr lo, and press [can] key to select
Or move ["or] key to Manual Dial, then press lwrce [m] key to entera user alias
or ID, and press [can] key to select
4 Moye[--or]key to radio disable, and then press [my] key to select.
5 The display shows the radio disable.  and the LED indicator light is red.
6 Walt ror confirmatlon.
7 If successlul, emit a beep and the screen displays radlp disable successfully.
Or if it tails, emit a beep and the screen displays radlo tail to disable
During radio disable operation, do not press the [m] key, because you will not get a
confirmation message.
All
Radio Enable
Use menu function:
1. Press [m] key to enter the menu mode.
2. Move [not] key to Contacts, and then press [can] key to select, entries are in alp-
habetical order.
3. Move ["or] key to the required alias or lD, and press [m] key to select.
Or move [nor] key to Manual Dial, tnen press twrce [my] key to enter a user alias
or ID, and press [an] key to select.
4. Move ["or]key to radio enable, and then press [can] key to select.
5. The display shows the radio enable.  and the LED indicator light is red.
6. Wait for confirmation
7. ll successlul, emit a beep and the screen displays radio enable successfully.
Or it it tails, emit a beep and the screen displays radio tail to enable
Durlng radlo enable operatlon, do not press the [m] key, because you will not get a co-
ntlrmation message.
Scaning List
Create a scan list and assign to a single channel I taikgrcup. your radio can support up to
250 scan lists, each up to to members. Each scan list support mixed analog and digital
channels You can edit the Scan “St to add / delete Channels or Set the prlorlly Channel.
Check members of list
1 Use the channel knob to select a channel With presprugrammed scan list.
2 Press the [m] key to enter the menu mode;
3 Moveior1key to scan, and then press the [my] key to select;
4 Move ["or] key to Viewlist the list, and then press the [can] when to select;
5 Use["or]l< Frequency
0 Channel Name
a Time out Timer
‘ CTC/DCS
I Color Code
. Repeater Slot
Rx Frequency
. Press [an] key to enter the menu mode
. Mave[or] key to utilities. and then press [m] key to select.
. Move ["or] key to program radio. and then press [can] key to select.
me‘
. Use the keypad to enter the correct Program radio password (programmed by software).
and then press [can] key to select
5. Move[or] key to receiving lrequency, and then press [up] key to select
6. The screen displays receiving frequency oi the current channel, and then press [m] key
to select
7. Press the number keys to enter the corresponding number, press [
] key to delete the
last number. press [m] to return to the previous menu.
a. After finish the change. press [up] key. the screen dispiays receiving frequency has
been saved.
Note: Editing trequency will be limited Within the frequency range setted by programming
software. if iess than the write frequency range setted by software, the final change
result will be the minimum lreduency oftrequency range setted on soltware. otherWise
it is maximum.
Tx Frequency
. Press [in] key to enter the menu mode.
Move[or]key to utilities, and then press [can] key to select
. Move ["or]key to program radio, and then press [my] key to select.
. Use the keypad to enter the correct Program radio password (programmed by software),
curve
and then press [in] key to seiect.
. Move [nor] key to transmitting frequency. and then press [mi] key to seiect.
6. The screen dispiays transmitting frequency of the current channei. and then press [can]
key to select
7. Press the number keys to enter the corresponding number, press [m] key to delete the
vi
last number. press [m] to return to the previous menu.
in
8 Alter finish the change. press [m] key. the screen displays transmitting lrequency has
been saved.
Note: Editing lrequency will be limited within the frequency range setted by programming
software, if less than the write trequency range setted by software. the tinal change
result wlll be the minimum frequency olirequency range setted on software, otherwlse
it is maximum
Channel Name
Press [an] key to enter the menu mode.
Move[or]key to ulllities. and then press [m] key to select.
Move[or]key to program radio. and then press [a] key to select.
#UNA
Use the keypad to enter the correct Program radio password (programmed by software).
and then press [m] key to select
5 Move ["or] key to the channel name and press [m] key to select.
6 The screen displays the current channel name. press the [a] key to SWltCh the input
method to enter the relevant letters. numbers or Characters. the same as the input meta
tied and text editing.
7 Atter the change is complete, press [can] key. the screen displays channel name has
been saved
TOT
Press [an] key to enter the menu mode.
Move[or]key to utilities. and then press [m] key to select.
Mcvelorlkey to program radio. and then press [m] key to select.
owns
Use the keypad to enter the correct Program radio password (programmed by soflware).
and then press [my] key to select
5 Move ["cr] key to TOT. and then press [can] key to select
6 The screen displays inrinlte. 155. 303 . 5553 and other options (lncreaslng 158 each
time). move [nor] key to the corresponding option. then press [m] key to select.
it you choose inflnlte. the screen displays transmit time close. if you select others. the
screen display corresponding time selected.
CTC/DCS
CTCSS/DCS can only be set on analog mode. lncludlng'
- CTCSS/DCS encodlng
- CTCSS/DCS decodlng
Encode
1 Press [an] key to enter the menu mode.
2 Move[--or]keyto utilities. and then press [can] key to select.
3 Movelor]key to program radio. and then press [my] key to select.
4 Use the keypad to enter the correct Program radlo password (programmed by software),
and then press [can] key to select.
5 Move [or]key to CTCSS/DCS, and then press [in] key to select.
6 Move [or]key to CTCSS/DCS encoding, and then press [m] key to select.
7 Screen display off and a set oi CTCSS/DCS encoding value, move ["or] key to off,
and then press [Eu] key to select, and there will be no CTCSS/DCS encoding value,
screen dlsplays CTCSS/DCS encoding value oft; move ["or] key to CTCSS/DCS
encoding value, and then press [can] key to select, then set the corresponding value,
screen displays the corresponding crcsstocs encoding value.
Decode
1 Press [an] key to enter the menu mode.
2 Move [or]key to utilities, and then press [can] key to select.
3 Move [or]key to program radio, and then press [at] key to select.
4 Use the keypad to enter the correct Program radio password (programmed by software),
and then press [my] key to select
5 Move ["or1key to CTCSS/DCS, and then press [m] key to select.
6 Move [nor1keyto CTCSS/DCS decoding. and then press [can] key to select.
7 Screen dlsplay off and a set of CTCSS/DCS decodlng value, move ["or] key to off.
and then press [up] key to select, and there will be no CTCSS/DCS decoding value,
screen displays crcssmcs decoding value off; move [nor] key to crcsstocs
decoding value, and then press [m] key to select, then set the corresponding value,
screen displays the corresponding CTCSS/DCS decoding value.
Color Code
Color code only can be set on digital channels.
1. Press [can] key to enter the menu mode.
2. Move[--or]keyto utilities, and then press [m] key to select.
3 Move[--or]keyto program radio, and then press [can] key to select
4. Use the keypad to enter the correct Program radlo password (programmed by soltware).
and then press [m] key to select.
. Move[--or]key to color code, then press [m] key to select.
a. Move ["or] key to select color code values. and then press [can] key to select
Screen Shows X(the Selected Color code value) is Selected.
or
Repeater Slot
Repeater slot only can be set on digital channels.
1 Press [an] key to enter the menu mode
2. Move[--or]key to utilities, and then press [any] key to select.
3. Move[--or]key to program radio, and then press [can] key to select.
4. Use the keypad to enter the correct Program radio password (programmed by software),
and then press [in] key to select.
5 Move ["orikey to repeater slot, and then press [my] key to select
6. Move [nor] key to select repeater slot values, and then press [m] key to select.
Screen shows Xtthe selected repeater slot value) is selected.
VOX level
.Pressmm] to enter menu mode
.Move ["0r1to Utilities, then press the [m] key
. Move ["0r]to radio Programming Radio, then press [can]
. input the correct password or radio (set by sortware) , press [can]
Move [norm vox, then press [can]
. Move [nor] to set the VOX level you need, there are level 1-10 to be selected.
mwbmm‘
Tx Contact
. Press [an] to enter menu mode
. Move ["orlto Utilities, then press the [ml key
Move ["orlto radio Programming Radio, then press [can]
input the correct password 0' radio (set by software) , press [m]
.Move ["0r1to TxContact , then press [m]
. Move ["orho select the Contacts you need, radio will show the info "TxCotact
Selected"
mmmeA
B'Il
GroupList
Press [an] to enter menu mode
Move ["orlto utilities, then press the [m] key
Move ("orlto radio Programming Radio, then press [m]
Input the correct password of radio (set by software) , press [m]
Move ["0I‘1to GroupList, then press [can]
Move [nor] to GroupList . you will be able to add and delete group members from
mmAuN_.
the selected group list Or you can move [nor] to select to add group list
Export/Import the Digital Contact
1 Click the Digital Contact on the programming software
2 if you click “Export" after read the radio's digital contact. you can export the corresponding
digital contact from radio.
if you want to import the digital contacts which have been edited in advance, Just click
“Import" to select the pre established digital contacts into radio Additional lunctions
Record(Be able to record for more than 8 hours when it's 3000 channels
&10000 contacts )
Record On/ Off
Note: Record Vuncllon IS only avallable on dtgltal mode
1 You can set one of the Buttons Definitrons to turn on/ofi the record
2. Menu operattons
(1)Press [mm enter menu mode
(2) Muve [nor] to Utititres. then press [m] to select
(3) Move [nor] to select Radm Settings,
(4) Move ["or] to Record
(5) Move [nor] to Turn On/ Turn on
(a) Press [m] to setecl
When the record functton is turned on. each digital calt wtlt be recorded and stored
in the Call Log submenu
Record Check/Playback
1 Press [an] to enter menu mode
2 Move [nor] to Catl Leg. press [can] to setecr
a Move ["or] to Record‘ press [can] to select
4 Move [nor] to record Drrectory (records er be stored each day)‘ press [m]
5 Move [nor] to select the record you need
6 Press [an] to choose tram: Ftay, Destinatton D Source ID. Date. Time ‘Tx/Rx.
RecordTrme
7 Press [an] to select
In)
Mcwnfinmzoa
0253. mumainmzcsm
335:2 3mL§ w booLmogin
0:3an @000
3.3:ng m3 2 w 69:
9.92:5 43:55.5 ‘uooolmouo
Damage 55% N 2 no
Eamfiaixxsé
A”: .wwumbnma
55.9:
”583;: 3:25
$ng 455
mmzmQ 02033 N803):
>333 .3nmamnnm mos
>:Bo 0:85 V922. A<< @ .30
9525, $23 6%,:
053 Umnm SF. omooanm
45:24.52
IE: AmSZI: rain AA<85 xmwugmm
+Axwwam
995. 3088.
mamTamSN umidnmnu
Receiver
Ana‘og Sensmuluy
0 ZuV @12dE SINAD
D‘gital Sens‘bil‘ly
o 25W(BER:5%)
Adjacent Channe‘ Selechviw
s760d3@12.5KHz
Co-Channel Rejecmn 265GB
Spunous Respunse 270(18
Audio Respunse +1—eaua
Rated Audio distcmon <5°/o
Audlo Power 1W
Modulatwon Nolse 245dB®25KH2
/B40dB@12 5KHZ
Note: Specifical‘ons WHI be rev‘sed without Home due ‘0 (echnica‘ improvement Thank you.
ran
3'
Guarantee
Mode‘ Number:
Serla‘ Number'
Purchasing Date:
Dealer: Telephone
Users Name: Telephone
Address: Post Code
Remarks:
1 This guaramee card m be Kep| by me user, rm rep‘emshmenl w ‘05!
2 This guararuee card m be men & chopped by me dea‘er, or u \s mvalld
3 Don'« aner «ne guaranlee card, p‘ease confirm me sena‘ numbev an the guaramee cam Is same as
man on me machme
4 Oneyear guarantee, charger, baflery, earrphune‘ antenna and came are not under guaranuee
5 Tne use! can get repamng serwce 1mm lheloHowmgways
~ Go (a me snap wnere you buy me macmne
. Our \aca‘ repalrmg agems
~ Send back to ourmmpany

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Modify Date                     : 2017:06:02 14:07:49+08:00
Create Date                     : 2017:06:02 14:07:47+08:00
Metadata Date                   : 2017:06:02 14:07:49+08:00
Creator Tool                    : Doro PDF Writer [2.03] [http://j.mp/the_sz]
Format                          : application/pdf
Title                           : MD-2017_User Manual
Description                     : MD-2017_User Manual
Document ID                     : uuid:fb836657-86ef-47f6-8fe9-13973ca374d9
Instance ID                     : uuid:5ff5ebcb-5788-4c80-98ca-7517f2690d16
Page Count                      : 16
Subject                         : MD-2017_User Manual
Creator                         : Doro PDF Writer [2.03] [http://j.mp/the_sz]

EXIF Metadata provided by EXIF.tools