TYT ELECTRONICS MD-380 DMR User Manual Part Three

Download:
Mirror Download [FCC.gov]
Document ID	2688737
Application ID	zlYdBnnrNQh2yJmDHOGiyA==
Document Description	Users Manual Part Three
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	270.91kB (3386371 bits)
Date Submitted	2015-07-22 00:00:00
Date Available	2015-07-22 00:00:00
Creation Date	2015-07-16 15:00:51
Document Lastmod	2015-07-16 15:00:51
Document Title	Users Manual Part Three

duratlon ot the call. And vice versa.
There are two scanning methods
I Manual Scan. According to a ore-programmed scan on / off key or menu function to start
the scan. when you start scanning. radio will detect all channels l contact groups on pres
programmed scan list
0 Auto Scan When you select an already actlvaied auto scan channels / Contact groups.
radlo scans from the actlvated auto scan channel.
Start/Stop Scan
Press Pre-programmed Scan On / Off KeyOr Enter The Scan Menu Functlon
1 Using the channel knob to select a channel ot preeprogrammed scan list:
2 Press [ alto enler menu mode;
3 Press [a oral to scan. and then press [ a ] to select;
4 It the scan ls disabled. the screen dlsplays on or ll the scan is actlvated. the screen dis-
plays off.
Press [a ] to select
When the scan is activated, LED lndicator flashes red and displays scan lcon ; or
char
when scanning is dlsabled. LED light goes out and does not display the scan icon
fill
Scanning reply
Radio detect active channel/contact group when scanning. at this Ilrrle radio will slay in the
channel/ contact group. which is called "Scan hang tlme" preaprogrammed time.
Procedure.
‘l Hold the radio in a verllcal posltlon and keep one to two lnches (2 5 to 5 0 cm) dlstance
lrom the mouth. llr you enable the "channel ldle tone" lunction. when transmittlng radio
release [PTTJ key. you Will hear a short beep. indicating that the channel is idle. waiting
tor your respond.
2. Within the hang time by pressing [PTI'] button. LED indicator light is red.
3 Release [PW] key to respond
4 ll you do not respond within the hang time. radio will continue down the scan
Utilities
Utilities Includes the following Contents:
I Radio settings
' Radio info
- Program Radio
Radio Settings
Radio Setting includes'
' Talkaround
I Tones/Alerts
I Power
I Backlight
- Squelch
o intro Screen
- Keypad Lock
- Language
I LED Indicator
' VOX
’ Passwd Lock
- Clock
I Mode
all
Talkaround
When the transponder does not work, or when the radio located outside the range 0! the
transponder but located Wilnin the range ol other radios call, you can continue to commune
icate This is called "talk around"
Press Pre-prograrnrned repeater I talk around button, you can sWitcn between repeater/
talk around mode.
Use the menu function
1. Press [ a 1 key to enter the menu mode.
2. Press [uorn] key lo utilities, and tnen press [a ] key to select
3 Press [uorfl] key to radio settings, and then press tne[a ] key to select
4. Press [flora] key to talk around, and then press [B ] key to select.
5. It radio is currently in repeater mode, you can see the open, or it radio is currently in talk
around you can see the close.
6. Press [ a 1 key to select.
7. Screen showing turn on talk around l-Dl or turn off talk around.
8 The screen automatically returns to the previous menu
Even after the shutdown, still remains talk around.
Tones/Alerts
including the ioiiowrrig oonlerits
-AiiTones - Taik Permit - Keypad Tones
All Tones
li desired. you can enable or disable all radio tone and prompts (except emergency lnCcms
ing tone)
Press pre-prograrrtmed all Beep ON / OFF to turn on or of! all radio tones.
Use the menu iunclion:
Press [a ] key to enter the menu mode.
Press [flora] key to utilities. and then press [a 1 key to select.
Press [a orn] key to radio settings. and then press the [ a ] key to select
Press [a orn] key to tones/alerts, and then press [ a] key to select
Press [a torn] key to all tone, and then press [ E ] key to select.
Press [9 ] key lo selecl on, then enable all tone and prompts. screen displays all tone
moisture.
is open.
Or press l a 1 key to select on. then turn 0" all tones and prompts. screen displays all tone
is oil.
Keypad Tones
if deslred, you can activate and deactlvate call admlssiun tone.
1 Press [ a ] key to enter the menu mode.
2 Press [a orfl] key to utilities, and then press [ a ] key to select
3 Press [a orn] key to radio settings, and then press the [ a ] key to select
4 Press [a orfl] key to tones/alerts, and then press [B ] key to select.
tlll
5. Press [a orfl] key to keyboard tone, then press [ ] key to select.
6. Press [ B ] key to select Open, then enable the keyboard tone, the screen shows keyb-
oard tone is turned on.
Press [ I3 1 key to select on, then turn on the keyboard sound. the screen shows keyboard
[one Is turned off.
Power
You can set each channel power level to high or low. Setting. Highapuwer radio implement
communications With relatively far distance radios. Lowspower raoio implement communla
Gallons wllh relallvely close dlstance radios.
Press pre-programrned high / low power selection key. you can sWitch high / low transmit
power
Using the menu function:
Press the [ a] key to enter the menu mode
Press [corn] key to utilities, and then press [ I3 ] key to select
Press [uorn] key to radio settings, and then press the [ a] key to select.
Press [Born] key to power, and then press [a ] key to select
Follow the on-screen instructions to change the current settings.
Press [ G ] key to select the new power level.
Return to the previous menu screen
Newewwa
Press [ an ] to return to the main screen. the screen displays the power level icon.
In
Backlight
You can turn on or oil the screen backlight according to the need Thls setting also aliects
the menu button and the keyboard backlight.
Press a preaprugrarnmed automatical backllght key to switch backllght settlhgs
Using the menu function:
1 Press [ a 1 key to enter the menu rnooe
Press [corn] key to utilities, and then press 1 a] key to select
Press [flora] key to radio settlngs, and then press the [B ] key to select
Press [flora] key to backlight, and then press [ B ] key to select
The screen displays always open. 55, 103, 155 options, press [a 1 key to select always
01wa
open, the screen Will remain lit and won‘t turn on. or it you choose 53, 105, 155, the sea
reen backlight Will be off in the correspondlng time under users Without any operations
Squelch
You can ad1ust radlo squelch level, thus filtering low signal intensity useless call or channel
higher than normal value Setting Normal ls the deiault, strlct filtering (useless) call or bac-
kground nelse. However, a call from a remote locatlon may also be tlltered out.
Press preaprogramrned strict / normal squelch button to sWilch between normal and strict
squelch level.
Using the menu function.
1 Press [ a 1 key to enter the menu mode
2. Press [flora] key to utilities, and then press [ Q] key to select
3. Press [Bern] key to radio settings, and then press [ G] key to select.
4. Press [flora] key to squelch, and then press [ B] key to select
5. Select strict or normal. and then press 1 ‘3 1 key to select.
6. The screen returns to the previous menu.
Intro Screen
If desired. you can enable and disable the Intro Screen display
1. Press [ a 1 key to enter the menu mode.
2. Press [9mg] key to utilities, and then press [ a 1 key to tight.
3 Press [corn] key to radio settings, and then press the [a 1 key to tight
4. Press [Born] key to Intro Screen, then press [ B] key to select
5. The screen is on, press [3 ] key to enable the Intro Screen dlsplay, the screen displays
the boot screen dlsplay on.
Or the screen is 0". press [I3 1 key to close the lntro Screen display, the screen displays
the hoot screen dlsplay off.
Keypad Lock
You can lock the keypad to prevent accidental key lnput Ways include manual and autom-
atlc keypad lock, which includes 58, 108, 155 three options.
1. Press 1 a 1 key to enter the menu mode.
2. Press [Born] key to utilities, and then press [ I31 key to select
Ill
3 Press [a orfl] key to radio settings, and then press [B ] key to select.
4 Press [a orfl] key to keypad lock, then press [B ] key to select.
5 Press [B orfl] key to manual. and then press [9 ] key to select, screen show to se-
lect Manual, you need to long press [ m ] key to lock keypad on the main interface.
6 Press [a orn] key 53, 105, iss, the screen shows to select the corresponding time,
then keypad will be locked and return to the main screen it user have not any keypad op-
eration after corresponding period or time.
7 To unlock the keypad, press [ 3] key, then press [ .1 key
5 Screen shows unlock keyboard, and then return to the main screen.
Language
Radio supports the ioilowmg languages:
- English
a Chinese
1 Press [ a ] key to enter the menu mode.
2 Press [a orn] key to utilities, and then press [ a] key to select
3 Press [a org] key to radio settings, and then press [a 1 key to select
4 Press [a oro] key to the language selection, then press [ B] key
5 Press [a orfl] key to the corresponding language option, then press [ G ] key.
6 Screen displays to select corresponding language. and then jump back to lhe main inter
rface
LED Indicator
If desired, you can activate and deactivate the LED.
1. Press [ B ] key to enter the menu mode.
2. Press [flora] key to utilities. and then press [ a ] key to select
3. Press [uoru] key to radio settings, and then press [ a] key to select.
4 Press [norm key to LED indicator, and press [ .1 key to select
5 The screen displays open, press [ a ] button to enable LDE light, screen shows to turn
on the LED light.
Or The screen displays oft, press [ B] button to turn off the LED light, screen shows to
turn uffthe LED light.
it you disable the LED lighl, buttons and keyboard cackiighl automatically turns off.
VOX
This iunclion allows you to initiate voicesactlvated handssfree calls on presprogramrned chs
ahhels Whenever a microphone with VOX lunctlori detect voice, radio will automatically
transmit signals Within lure-programmed period oi tirne
During radio operation press [PTT] key Will disable VOX lunction, lo re-enable the VOX fu-
nction, do one ofthe rollowmg.
' Turn off and return on radio
0 Through the Channel Knob I0 Change the Channel, or
o Perlorm the lollowihg procedure
Note: Enabling or disabling this function is limited to activate radios ol these lunction.
Press pre-programrned VOX on / oft key, to turn on or off this function.
Using the menu function:
1 Press I a ] key to enter the menu mode.
Press [Born] key to utilities, and then press [a 1 key to select.
Press [flora] key to radio settings, and then press the [ a ] key to select
Press [flora] key to VOX, and then press [B ] key to select.
Screen shows VOX off and VOX level 1-108, if you choose to turn off, press [3 ] key to
disable the VOX function. emitting a beep and the screen displays VOX 0". If you choose
01me
tries, vox funclion is enabled, and the voice transmit sensitivity is on the corresponding
level. lf you activate the call allowing sound, you can initiate a call using a lrigger word
Waiting sound end (it activated), and then speak clearly into the microphone
till
Passwd Lock
. Press [9 ] key to enter the menu mode.
. Press [flora] key to utilities, and then press [ B] key to select
. Press [corn] key to radio settings. and then press [ I3] key to select.
. Press [uorn] key to passwd lock password, and then press [ a] key.
<1!wa;
Use the keypad to enter the correct 8 digits password (You can pre—set by software), and
then press the l a ] key
6. ll the password is incorrect, the screen displays an error code. lithe password is correct,
the screen displays options
7. ii the first line shows open, press [ Ia] key to display the powerron password application.
Next time you need to enter the correct password to turn on radio. it the lirst line shows
orr, press [ a] key to display the power—on password cancellation, nexl time you can
directly turn on radio
8. Press [flora] key to change power-on password, and then press [ B ] key to select.
9. Enter 8 digits new password, and then press [ B ] key to select.
to. Once again, enter 3 digits new password, and then press [ a] key to select.
it. Screen displays that password was successfully changed.
Note- The power—on password must be set to eight digits
Clock
Clock settings are dlvlded lnto:
' Tlme
. Date
Time
1 Press [ I3 ] key to enter lhe menu mode.
2 Press [uorn] key to utilities, and then press [ a] key to select
3 Press [flora] key to radio settlngs. and then press [a 1 key to select
4 Press [flora] key to clock, and then press [ E ] key.
5 Press [flora] key to tlme. and then press [ ] key to display the current time.
6 Press [ a ] key to enter Ilme selllng interlaee
Press [ubrn] key to move lefl and rlght to select the desired number, lhe selected
number wlll reverse Vldeo displaythen enler the corresponding numbers to change the
time via the numeric keypad
8 Press [ B ] key to save, the screen displays the tlme has been saved
Date
\lmwwaA
. Press [ B] key to enter the menu mode.
. Press [a urn] key to utilities, and then press [ B] key to select
. Press [a pro] key to radio settings. and then press [(3 1 key tu select.
. Press [u are] key lo clock. and then press [ B 1 key.
Press [a pro] key to date, and then press [ a 1 key to display the current date
Press [ a ] key to enter the time setting lnteriace
. Press [flora] key to move lelt and rlght to select the desired numbers, the selected
numbers will reverse Vldeo displaythen enter the corresponding number to change the
date Vla the numeric keypad
. Press [a 1 key to save, the screen dlsplays the date has been saved.
Mode
Mode settlngs are divided lnto
' CH Mode
I MR Mode
‘l
2.
3.
4.
5.
Press [ a] key to enter the menu mode
Press [B urn] key to utilities, and then press [ E ] key to select
Press [fl orfl] key to radio settings, and then press [ B ] key to select.
Press [a pro] key to mdde and then press [ a ] key.
Press [a pro] key lo selepl CH mode or MR mode. lhen press [ a] key to select lhe
I'lll
corresponding mode. the screen displays this mode is selected.
6 The main screen Will show channel name or frequency (receiving frequency) according to
the selected mode.
Radio Info
Radio contains the following information
- My Number
0 Versions
Note' At any time you can return to the previous screen by pressing the [a ] key
My Number
1 Press [ B ] key to enter the menu mode.
2 Press [flora] key to utilities. and then press [ B ] key to select.
3 Press [flora] key to radio information. and press [ a ] key to select.
4 Press [gore] key to my number, then press [a 1 key.
5 The dispiay shdws radio ID and name
Versions
Display radio firmware version.
1 Press [ B ] key to enter the menu mode.
2 Press [uorn] key to utilities. and then press [ a 1 key to seieet.
3 Press [corn] key to radio information. and press [ .1 key to select.
TII
4.
5.
Press [Born] key to radio versions. and then press [ 9] key.
The screen will display the current firmware versmn. Codeplug version.
Program Radio
Radio cohliguratioh mainly includes editing the channel contents
Channel contents can be edited include
- RX Frequency
- TX Frequency
- Channel Name
I Time out Timer
- CTC/DCS
- Color Code
- Repeater Slot
Rx Frequency
burs);
oi
. Press [a ] key to enter the menu mode.
. Press [corn] key to utilities. and then press [ a] key to select
. Press [noro] key to program radio. and then press [ a 1 key to select.
. Use the keypad to enter the correct Program radio password (programmed by software).
and then press [ a 1 key to select
. Press [fl orfl] key to receiving frequency. and then press [ a ] key to select.
. The screen displays receiving frequency of the current channel. and then press [ B ] key
in
to select.
7 Press the number keys to enter the corresponding number, press [ a] key to delete the
last number, press [ B ] to return to the previous menu.
a After finish the change, press [ a ] key. the screen displays receiving frequency has
been saved.
Note- Editing frequency wlll be limited Within the frequency range setled by programming
software, if less than the write frequency range setted by software, the final change
result will be the minimum frequency of frequency range setted on software, otherwise
it is maximum.
Tx Frequency
1 Press [a ] key to enter the menu mode
2 Press [flora] key to utilities, and then press [ l3] key to select.
3 Press [flora] key to program radio, and then press [ B ] key to select.
4 Use the keypad to enter the correct Program radio password (programmed by software),
and then press [a 1 key to select.
or
Press [flora] key to transmitting frequency, and then press [ a 1 key to select.
6 The screen dlsplays transmitting frequency of the current channel, and then press [ a]
key to select
7 Press the number keys to enter the corresponding number, press [ B ] key to delete the
last number, press [ B ] to return to the previous menu.
6. After finish the change, press [ B] key, the screen displays transmitting frequency has
been saved
Note. Editing frequency Will be limited within the frequency range setted by programming
software, if less than the write frequency range setted by software, the final change
result wlll be the minimum frequency of frequency range selled on software, othenmse
It Is maxlmum
Channel Name
1. Press [ G ] key to enter the menu mode.
2. Press [flora] key to utilities, and then press [ 3] key to select
3. Press [acrn] key to program radio. and then press [a 1 key to select.
4. Use the keypad to enter the correct Program radio password (programmed by software),
and then press [a ] key to select
Press [a urn] key to the channel name and press [ a ] key to select
6. The screen displays the current channel name, press the [m ] key to swttch the input
method to enter the relevant letters, numbers or characters, the same as the input met-
hod and text editing
or
7. After the change is complete, press [ a 1 key, the screen displays channel name has
been Saved
l1l
TOT
Press [E ] key to enter the menu mode.
Press [flora] key to utllities. and then press [ B ] key to select.
Press 1norn1 key to program radio, and then press [a 1 key to select.
Use the keypad to enter lrie correct Program radio password (programmed by sollware),
meA
and then press 1 a] key to select
Press [uorn1 key to Tor, and then press [ a 1 key to select
The screen displays infinlte, 158, 308 .. 5553 and other options (lncreaslng 155 each
tlme), press [flora] key to the corresponding option. then press [ 5] key to select,
it you choose infinite, the screen displays lransmil tlme close, if you select others. the
mar
screen display corresponding time selected.
CTC/DCS
CTcss/Dcs can only be set on analog mode, lncludlng
- CTCSS/DCS encoding
- CTCSS/DCS decoding
Encode
1 Press [B ] key to enter the menu mode.
2 Press [flora] key to utllities. and then press [ B] key to select.
3 Press [flora] key to program radio, and then press [a 1 key to select.
4. Use the keypad to enter the correct Program radlo password (programmed by software),
and then press [ B ] key to select.
5. Press [flora] key to CTCSS/DCS. and then press [ B ] key to select.
6. Press [corn] key to crcssrocs encoding. and then press [ I3 1 key to select
7. Screen display on and a set or crcssrocs encoding value, press [a org] key to oh,
and then press 1 a 1 key to select, and there Wlll be no crcssmcs encoding value,
screen dlsplays CTCSS/DCS encoding value oil; press [a orn] key to CTCSS/DCS
encodlng value, and then press [ Q] key to select, then set the corresponding value,
screen dlsplays the correspondlng CTCSS/DCS encodlng value.
Decode
1. Press [ E ] key to enter the menu mode.
2. Press [flora] key to utilities, and then press [
3. Press [flora] key to program radio. and then press [ 13 1 key to select.
key to select
. Use the keypad to enter the correct Program radio password (programmed by software),
and then press 1 a] key to select
. Press [flora] key to CTCSS/DCS, and then press [ B] key to select.
6. Press [flora] key to CTCSS/DCS decoding, and then press [ B ] key to select
7. Screen dlsplay off and a set of CTCSS/DCS decoding value, press [Born] key to off,
and then press 1 a 1 key to select, and there Wlll be no CTCSS/DCS decoding value,
screen displays crcssrocs decoding value orl; press [a orn1 key lo CTCSS/DCS
tn
I'll
decoding value, and then press [ B ] key to select, then set the corresponding value,
screen displays the corresponding CTCSS/DCS decoding value.
Color Code
Color code only can be set on digital channels.
1 Press [ a ] key le enter lne menu mode.
2 Press [flora] key to utilities. and then press [ a] key to select.
3 Press [flora] key to program radio, and then press [ a] key to select
4 Use the keypad to enter the correct Program radio password (programmed by soltware),
and then press [ B ] key to select.
Press [flora] key to color code, then press [ a] key to select.
Press [nern] key to select color code values. and then press [ (3] key to select.
mm
Screen shows X(Ihe selected color code value) is selected.
Repeater Slot
Repeater slot only can be set on digllal channels
1 Press [a ] key to enter lhe menu mode
2 Press [flora] key to utilities, and then press [ [3] key to select.
3 Press [flora] key to program radio, and then press [ 9] key to select.
4 Use the keypad to enter the correct Program radlo password (programmed by software).
and then press [ (3] key to selecl.
1ll
5. Press [flora] key to repeater slot, and then press [ Q] key to select.
6. Press [flora] key to select repeater slot values. and then press [a ] key to select.
Screen shows X(the selected repeater slot value) is selected
I'll
Specifications
General Specifications
Transmitter
Frequency range
UHF: 400-480MHZ
Output power
Hign: <5W(Hl) Low: 71ZGB
Adjacent Channel Se‘ectivity
TIA503C155dB ETS\:60dB
Spunous Response
TIABOSCJSdB ETSL70dB
Rated audio power 1w
Aumo response =1dE—73d8
Rated audio drstonion 3%(Type)
Spunous Radwation
Antenna: SKHz-WGHZ < -57dBm
1GHZa12.75GHZ < a47dBm
Note: Specmcauons WHI be revised wilhcut nouce due to lechmca‘ impmvemenl. Thank you.
44444564444 auuswq)mgméuommaasea‘d44444444444
Guarantee
Mode‘ Number
Seria‘ Numberv
Puranasing Da‘e:
Dea‘er Te‘ephone
User's Name Te‘ephone
Address: Posl Code
Remarks:
1 Ms guaranlee card to be kept by me user, no rep‘emshmenl w my
2 ans guavanlee card to be Med & dropped by the dea‘er, m u rs mvalld
3 Dam alter we guarantee card, p‘ease caunrm Ine sena‘ number on we guarantee card .s same as
man on the machine
One-year guaramee, Charger, banery, ear-phone amenna and cable are nm under guaramee
Tne user can gel repamng semce «gm |ne laHawmgways
~ (30 to me snap wnere you buy me macmne
‘ our way rapzmng agems
~ Send back m our company

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Modify Date                     : 2015:07:16 15:00:51+08:00
Create Date                     : 2015:07:16 15:00:51+08:00
Metadata Date                   : 2015:07:16 15:00:51+08:00
Format                          : application/pdf
Document ID                     : uuid:4425035e-cd51-4708-8593-a7756cbf3bcf
Instance ID                     : uuid:0b597005-19f0-4be2-bf14-2fbea9bfe307
Page Count                      : 13

EXIF Metadata provided by EXIF.tools