TYT ELECTRONICS MDUV380 DMR Digital Transceiver User Manual MD UV380 180321

Download:
Mirror Download [FCC.gov]
Document ID	4041460
Application ID	OvwL5KjvEkuGXumLbViohw==
Document Description	user manual II
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	331.16kB (4139495 bits)
Date Submitted	2018-10-19 00:00:00
Date Available	2018-10-19 00:00:00
Creation Date	2018-07-26 20:21:24
Producing Software	Adobe PDF library 10.01
Document Lastmod	2018-07-26 20:21:33
Document Title	MD-UV380英文内页180321
Document Creator	Adobe Illustrator CS6 (Macintosh)

Use the DMR Digital Transceiver in the environment with the temperature between-10℃ and 40℃,
otherwise, it may damage your DMR Digital Transceiver. It can be operating under 2000m.
Hereby, (TYT Electronics Co.,Ltd) declare that the radio equipment type (DMR Digital Transceiver)
is compliance with Directive 2014/53/EU.
Operation Frequency: 136-174 & 400-480MHz
Max. Output Power: 5W/1W
AC ADAPTER: MD-UV380 /MD-UV390 , Input: 100-240V~ 50/60Hz, 0.6A; output: 12V 0.5A
Antenna Gain:1.5dBi
Test position and configuration Head SAR was performed with the device configured in the positions
according to EN 62209-2:2010, and face up SAR was performed with the device 25mm from the
phantom. Body SAR was also performed with the headset and belt clip attached and without 0mm from the phantom.
Caution:
For Adapter: Shall be installed near the equipment and shall be easily accessible.
For Battery: Risk of explosion battery is replaced by an incorrect type, dispose of
used batteries according to the instructions.
EU Declaration of Conformity
We, hereby declare that the essential requirements set out in the RED Directive 2014/53/EU, have
been fully fulfilled on our product with indication as below:
Product Name
DMR Digital Transceiver
Brand Name / Model
TYT/ MD-UV380, MD-UV380G, MD-UV390
AC ADAPTER: (MD-UV390) TYT Electronics Co., Ltd, MD-UV390, Input: 100-240V~ 50/60Hz, 0.6A,
output: 12V
0.5A
(MD-UV380& MD-UV380G)TYT Electronics Co., Ltd, MD-UV380, Input: 100-240V~ 50/60Hz,
0.6A; output: 12V
0.5A
Battery: (MD-UV390) TYT Electronics Co., Ltd, MD-390, 7.4V, 2200mAh
(MD-UV380& MD-UV380G)TYT Electronics Co., Ltd, MD-380, 7.4V, 2000mAh
Antena: Detachable , Gain 1.5dBi
The following standards have been applied for the investigation of compliance:
Safety
EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
Health
EN 62209-2:2010; EN50566:2017
EMC
EN 301 489-1 V2.2.0 (draft)
EN 301 489-5 V 2.2.0 (draft)
ETSI EN 300 086 V 2.1.2
ETSI EN 300 219 V 2.1.1
EN 300 113 V2.2.1
Radio
Notified Body number 0700 PHOENIX TESTLAB GmbH
Furthermore, the ISO requirement for the in-process quality control procedure as well as the
manufacturing process has been reached. The technical document as well as the test reports will be
kept for a period at least 10 years after the last product has been manufactured at the disposal of the
relevant national authorities of any Member State for inspection.
Detail contact information for this declaration has been listed below as the window of any issues
relevant for this declaration.
Hardware Version: UV-V2.1-171109
Software Version: V1.06
Charger: (MD-UV390)TYT Electronics Co.,Ltd, Model name: CH390
, INPUT: DC 12V 0.5A,
OUTPUT: DC 8.4V, 0.5A;
(MD-UV380& MD-UV380G)TYT Electronics Co.,Ltd, Model name: CH380
, INPUT: DC 12V 0.5A,
OUTPUT: DC 8.4V, 0.5A
Manufacturer Information：
Company
Address
TYT Electronics Co.,Ltd
Block 39-1,Optoelectronics-information industry base, Nan'an, Quanzhou,
Fujian, China
Name/Title
Sophia Wong
E-mail
Tel. No.
+86-15259596756
Fax No.
Signature / stamp
Date:
tyt@tyt888.com
SAFETY TRAINING INFORMATION
our TYT Electronics Co., Ltd. radio generators RF electromagnetic
during transmit mode.This radio is designed for and classified as"Occupational Use Only",
meaning it must be used only during the course of employment by individuals aware of the
hazards,and the ways To Minimize Such hazards. This radio is NOT intended for use by the"General Population"
in an uncontrolled environment. This radio has been tested and complies with the FCC RF exposure limits for
"Occupational Use Only".Inaddition, our TYT Electronics Co., Ltd radio complies with the.
following Standards and Guidelines with regard to RF energy and electromagnetic energy levels and evaluation
of such levels for exposure to humans:
--IEEE Std. 1528:2013 and KDB447498, Evaluating Compliance with FCC Guidelines for Human
Exposure to Radio Frequency Electromagnetic Fields.
--American National Standards Institute (C95.1-1992), IEEE Standard for Safety Levels with Respect to
Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz.
--American National Standards Institute (C95.3-1992), IEEE Recommended Practice for the Measurement
of Potentially Hazardous Electromagnetic Fields- RF and Microwave.
Electromagnetic Interference/Compatibility
During transmissions, TYT Electronics Co., Ltd. radio generates RF energy that can
possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in
areas where signs are posted to do so. DO NOT operate the transmitter in areas that are sensitive to
electromagnetic radiation such as hospitals, aircraft, and blasting sites.
Occupational/Controlled Use
The radio transmitter is used in situations in which persons are exposed as consequence of their employment
provided those persons are fully aware of the potential for exposure and can exercise control over their exposure.
Attention:
This radio complieswith IEEE and ICNIRP exposure limits for occupational/controlled RF exposure
emvironment at operating duty factors of up to 50% and is authorized by the FCC for occupational use only. An
appropriate warning lable is affixed to all units. In order to comply with RF exposure requirements, a minimum
distance of 2.5cm must be maintained when held-to-face, and body-worn operations are restricted to the approved
original acessories (belt clip). Do not use this device when antenna shows obvious damages
This product is compliance to FCC RF Exposure requirements and refers to FCC website
https://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm search for(Model:MD-UV380 &MD-UV380G FCC ID:
The information listed above provides the user with the information needed to make him or
her aware of RF exposure, and what to do to asÿsure that this radio operates with the FCC RF
exposure limits of this radio.
POD-MDUV380 ) (Model:MD-UV390 FCC ID: POD-MDUV390) to gain further information include SAR Values.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Modify Date                     : 2018:07:26 20:21:33+08:00
Create Date                     : 2018:07:26 20:21:24+08:00
Metadata Date                   : 2018:07:26 20:21:33+08:00
Creator Tool                    : Adobe Illustrator CS6 (Macintosh)
Format                          : application/pdf
Title                           : MD-UV380英文内页180321
Document ID                     : uuid:3d6c4615-d192-4962-a6c0-9566a2a61641
Instance ID                     : uuid:93b07086-68b7-4b7f-8c1f-9ababc739054
Producer                        : Adobe PDF library 10.01
Page Count                      : 27
Creator                         : Adobe Illustrator CS6 (Macintosh)

EXIF Metadata provided by EXIF.tools