Tagsys 200ULRS Tag Reader User Manual Guide

Tagsys S.A. Tag Reader Guide

Users Manual

Technical documentation1Universal Laundry Reading StationInstallation GuideVersion 1.0
Technical documentation2UNIVERSAL LAUNDRY READING STATIONFCC EQUIPMENT STATEMENTWARNING TO USERS IN THE UNITED STATESFEDERAL COMMUNICATIONS COMMISSION (FCC) RADIOINTERFERENCE STATEMENT 47 CFR Section 15.105(b)This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, uses and canradiate radio frequency energy and if not installed and used in accordance with the instructions maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one or more of the followingmeasures:Ø Make sure you use only shielded cable to connect peripheral devices to your equipment.ØReorient or relocate the receiving antenna.ØIncrease the separation between the equipment and receiver.ØConnect the equipment into an outlet on a circuit different tothat to which the receiver is connected.Ø Consult the dealer or an experienced radio/TV technician forhelp.NO UNAUTHORISED MODIFICATIONS47 CFR Section 15.21CAUTION: This equipment may not be modified, altered, or changed in any way without signedwritten permission from TAGSYS. Unauthorized modification may void the equipmentauthorization from the FCC and will void the TAGSYS warranty.ANTENNA REQUIREMENT47 CFR Section 15.203CAUTION: This equipment must be professionally installed. The installer shall be responsible forensuring that the proper antenna is employed so that the limits in this part are not exceeded. Non-professional installation or installation of the equipment with an improper antenna may void theequipment authorization from the FCC and will void the TAGSYS warranty.
Technical documentation3CONTENTSOBJECT..............................................................................................................................................3DESCRIPTION & INSTALLATION .................................................................................................4FUSE................................................................................................................................................ 19LITHIUM BATTERY ....................................................................................................................... 19ANNEXESOBJECTThis document describes how to safely install a “Universal Laundry Reading Station”.Ce document décrit comment installer en toute sécurité la « Universal Laundry ReadingStation ».
Technical documentation4DESCRIPTION & INSTALLATION1) DESCRIPTION:1.1 Presentation:The station is composed of a TAG reader, one or severalantennas matched and tuned during manufacturing test, atallies and a hooding closed by back panels.La station se compose d’un lecteur de TAG, d’une ouplusieurs antennes adaptées et testées, d’un cadre et d’uncapotage fermé par des panneaux à l’arrière.The purpose of this equipment is to allow the reading of amoving tag on a conveyor.Cet équipement a pour objectif de permettre la lecture à lavolée d’étiquettes électroniques circulant sur un convoyeur.The station will be installed near the conveyor, on a 30mm-diametre pole placed vertically (see picture 2), which can bemade of steel or stainless steel. See paragraph “Advice andRestrictions for usage and security”.La station sera installée le long du parcours de convoyage,sur un mât placé verticalement (Cf. figure 2), de diamètre30mm, pouvant être en acier ou en acier inoxydable.Voir paragraphe Conseils et restrictions d’utilisation et desécurité.The station will be oriented the best way possible usingvarious points of adjustment (see picture 2), to ensure anoptimal reading rate (see Use).La station sera orientée convenablement grâce auxdifférents points de réglage (Cf. figure 2), afin d’assurerun bon taux lecture (Cf. Utilisation).
Technical documentation5The pole must be placed vertically (±3°), at 30cm (±5cm) from the conveying line. Theuseful zone of this pole, to properly hang the station, extends 20cm above the hanginglevel of the clothes hangers, and over 2m length downwards. The pole must be fixed,stable and rigid, in order to support the load of the station (around 17kg according to thechosen configuration) with an overhang of 40cm on the 2 points of hanging which arespaced by 104cm (see picture 5).Le mât doit être placé verticalement (± 3°), à 30cm (±5cm) de la ligne de convoyage.La zone utile de ce mât, pour l’accrochage de la station, se situe, en haut, 20cm au-dessus du niveau d’accrochage des cintres, et sur une longueur de 2m vers le bas.Le mât doit être fixe, stable et rigide, afin de supporter sans fléchir la charge de la station(autour de 17kg suivant les configurations) avec un porte-à-faux de 40cm sur les 2 pointsd’accroche qui sont espacés de 104cm (Cf. figure 5).It should be noted that the TAG reader, generally placed atthe bottom of the station, is the heaviest single element(~5kg). The remaining of the weight is uniformly distributed.A noter que le lecteur de TAG, généralement placé en basdans la station, est l’élément le plus lourd (~5kg), le restede la masse étant uniformément réparti.

Navigation menu