Tait TDAB1A Data Terminal User Manual Exhibit D Users Manual per 2 1033 c3

Download:
Mirror Download [FCC.gov]
Document ID	2565187
Application ID	6NO93eFJ/nVQ1TgCW04Mrw==
Document Description	Exhibit D Users Manual per 2 1033 c3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	83.49kB (1043660 bits)
Date Submitted	2015-03-25 00:00:00
Date Available	2015-03-25 00:00:00
Creation Date	2013-10-14 15:20:37
Producing Software	Microsoft® Word 2010
Document Lastmod	2015-01-07 08:43:33
Document Title	Exhibit D Users Manual per 2 1033 c3
Document Creator	Microsoft® Word 2010

TD9300
Preliminary Datasheet
S P E C I F I C AT I O N S
Optimised data reliability,
Benefit from data and voice PMR
Designed for telemetry and data
communications, Tait DMR offers a secure and
reliable machine to machine data terminal based
on the DMR Tier 3 trunking standard.
The TD9300 terminal has multiple data interfaces
and the intelligence to simplify wide area DMR
based connectivity, integrate quickly and
transparently support data communications.
KEY FEATURES
 Future proof multi-mode terminal (DMR Tier 3 & Wi-Fi)
 Designed for SCADA communications, simplifies integration into SCADA networks
 Full adherence to DMR standards, providing choice and interoperability
 Automatic selection of DMR data services to maximise throughput and manage voice and data services
 Flexible interfacing. Wide input voltage range and adjustable high power RF output, serial and Ethernet
interfaces for legacy and modern data terminal interfacing
 Engineered for use in demanding environments
FEATURES AND BENEFITS
Improve efficiency
 Monitor and control devices via long
range DMR, less travel, site visits
 Central diagnosis of faults enabling
optimum resource deployments.
 Secure, manage and maintain single
voice & data PMR network
Remote monitoring
 Extensive outstation diagnostics:

Temperature

Signal (RSSI & BER and MER)

Antenna fault

Input voltage

Telemetry status
Designed to perform in demanding
environments
 Tough die-cast metal chassis for
protection in all environmental extremes
 Protection and fold back mechanisms
limit occurrences of hardware failure,
service restored after fault cleared
 Flexible mounting systems, DIN rail in
both vertical and horizontal, on a 19 inch
rack tray or wall mounted
Standards based interface protocols
 Support for industry standard
protocols:

DNP3 TCP/IP and UDP/IP

DNP3 Serial

IEC60870-5-101 and -104

Eliminates costly proprietary protocol
integration and support
Security
 Encryption protects data (128 bit AES
and 56 bit DES)
 Terminals must both register and be
authenticated to access the network
 Stun and revive to disable devices
Applications

Control of SCADA IED/RTU
equipment

SCADA for oil & gas utilities

SCADA for control of irrigators

Remote or hard to reach AMR

Weather stations
Data services

Packet data over traffic channels for
telemetry, SCADA and customer
specific applications

IP data for transparent traffic channel
transfers

Control channel short data messages,
location, status and text
Flexible interfaces

Two RS232 / RS485 serial interfaces
for legacy equipment connection

Ethernet connection

2 digital input and 2 digital outputs to
monitor and control surrounding
environment, fully isolated.

Wi-Fi access point for local access,
re-configuration or upgrades
Backed up by our proven radio network expertise, the TD9300 is part of the Tait DMR solution portfolio that consists of
terminals, infrastructure, applications, services and integration with third party interfaces to ensure that your organization can
reap all the benefits of the spectrally-efficient DMR standard in a mission critical environment.
© Tait Limited 2013.
www.taitradio.com
TD9300
S P E C I F I C AT I O N S
Preliminary Datasheet
GENERAL
Power
8-30VDC @ 3.5A (25W output power) Standby: <90mA @ 24VDC
Dimensions
(WxDxH) 195mm x 150 mm x 85 mm
Operating temperature
-22F to 140F (-30C to 60C)
Water and dust protection
IP52
Frequency stability
Channels
Weight lb (kg)
±0.5ppm (-22F to 140F/-30C to 60C)
VHF, UHF, 700/800 MHz 12.5kHz spacing 2.5/3.125/5/6.25kHz increment/channel step
2.1lb
Mounting
DIN rail in both vertical and horizontal configurations, on a 19 inch rack tray or wall mounted
ESD rating
+/-4kV contact discharge and +/-8kV air discharge
Air interface standard
DMR: ETSI TS 102 361
Altitude
4570 meters (15000 feet)
Humidity
95% Relative Humidity thru Temp Cycle.
Vibration
3 Axis, Sine sweep 10-60Hz
Indicators
5 status LEDs: Tx, Rx, Active, Fault, Service (trunking)
Packet Data
½ Rate, ¾ Rate, Full rate, Single Slot
Standard:
IEEE 802.11b and g
Encryption:
WEP, WPA and WPA2
Authentication:
Extensible Authentication Protocol (EAP)
Wi-Fi access point
Mil-Std-810F 500.4, Proc2
IEC 60068-2-30
TIA_EIA 603B, 3.3.4.3
TRANSMITTER
Output power
FM Hum and noise (Analog)
Adjacent channel power – static (DMR)
ETS 300-113
Conducted/radiated emissions
Duty Cycle
VHF 136-174MHz
25W: 25W, 12.5W, 5W, 1W
12.5kHz: -40dB
12.5kHz: 60dB
UHF 400-470MHz
25W: 25W, 12W, 5W, 1W
25W: -36dBm
50W: -20dBm
5W
80% @ 25˚C
12W
75% @ 25˚C
25W
65% @ 25˚C
25W: -36dBm
40W: -20dBm
25% @ 60˚C
20% @ 60˚C
15% @ 50˚C
25W: -36dBm
40W: -20dBm
12.5kHz: 40dB
12.5kHz: 60dB
762-870MHz
30/35W
12.5kHz: 40dB
12.5kHz: 60dB
RECEIVER
VHF 136-174MHz
UHF 400-470MHz
762-870MHz
Sensitivity (DMR) 5% BER
-119dBm (0.25µV)
-119dBm (0.25µV)
-119dBm (0.25µV)
Intermodulation rejection (EIA603D)
Intermodulation rejection (ETS 300)
Spurious response rejection (DMR) (ETS 300-113)
FM hum and noise (Analog)
76dB
70dB
70dB
12.5kHz: -40dB
75dB
70dB
70dB
12.5kHz: -40dB
75dB
70dB
70dB
12.5kHz: -40dB
Conducted spurious emissions
-57dBm
-57dBm
-57dBm
Selectivity (Analog) EIA603D (2 Tone)
Selectivity (Analog) ETS 300-086
12.5kHz: 52dB
12.5kHz: 62dB
12.5kHz: 50dB
12.5kHz: 60dB
12.5kHz: 50dB
12.5kHz: 60dB
REGULATORY DATA
VHF (136-174MHz)
UHF (400-470MHz)
700/800MHz
USA
CFR 47
Canada
RSS-119
Europe
EN300-086, EN300-113, EN300-219
EN301-489, EN60950
Australia/New Zealand
AS/NZS4295
CFR 47
RSS-119
EN300-086, EN300-113, EN300-219
EN301-489, EN60950
AS/NZS4295
AS/NZS4365*
CFR 47
RSS-119
NA
NA
Specifications are subject to change without notice and shall Tait Limited facilities are certified for ISO9001:2008 (Quality
not form part of any contract. They are issued for guidance Management System), ISO14001:2004 (Environmental
purposes only. All specifications shown are typical.
Management System) and ISO18001:2007 (Occupational
Health and Safety Management System) for aspects
* Tait cannot guarantee full performance to the published
associated with the design, manufacture and distribution of
specifications when the radio is operating at frequencies
radio communications and control equipment, systems and
outside the specified range.
services. In addition, all our Regional Head Offices are certified
For further information please check with your nearest Tait to ISO9001:2008
office or authorized dealer.
© Tait Limited 2013.
The word “Tait” and the Tait logo are trademarks of Tait
Limited.
www.taitradio.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Create Date                     : 2013:10:14 15:20:37+13:00
Creator Tool                    : Microsoft® Word 2010
Modify Date                     : 2015:01:07 08:43:33+13:00
Metadata Date                   : 2015:01:07 08:43:33+13:00
Producer                        : Microsoft® Word 2010
Format                          : application/pdf
Document ID                     : uuid:f6053257-5d29-44fa-85e7-663d9172ae3e
Instance ID                     : uuid:45a1963a-3563-430a-8221-77800e307318
Page Count                      : 2
Language                        : en-NZ
Creator                         : Microsoft® Word 2010

EXIF Metadata provided by EXIF.tools