Tait TEL0054 mobile transceiver User Manual Installer and User information

Installer and User information

FCC RF Exposure Limits:

T2020-543 radios

Installer Information

Antenna Installation

To comply with FCC RF exposure limits, this product must be

installed using an externally mounted antenna with a gain

specified in the table below. This antenna must not be mounted

at a location such that any person or persons can come closer

than the minimum safe distance to the antenna.

User Information

Safety Training Information

This product generates Radio Frequency energy during

transmissions. It is classified as suitable for occupational use in a

controlled exposure environment. The following conditions

apply to the use of this radio:

■It must only be used with authorized accessories and antennas.

■The operator must ensure that the minimum safe distance between per-

sons and the antenna is not exceeded during transmissions.

■Do not exceed a duty cycle ratio of 50% transmit mode to stand-by or

receive modes. The radio is in transmit mode when the PTT button on

the microphone is pressed and the “TX” annunciator or warning LED

shows.

Antenna Details and Safe Distance Table

Radio Model Antenna Gain

(dBi)

Minimum Safe Distance

Inches Metres

T2020-543 2.15 20 0.5

5.15 30 0.71

WARNING