Tait TEL0055 mobile transceiver User Manual Installation guide

Tait Limited mobile transceiver Installation guide

Installation guide

8 T2000 Installation Guide T2000 Installation Guide 5four cradle cover mounting holes as a template to mark the locations for drilling. Ensure thatdrilling at the selected points will not damage existing wiring.2. Indent the drilling positions with a centre punch and drill 4mm holes for self-tapping screws, or6mm holes for nuts and bolts. Reduce the hole size if using self-tapping screws in metal whichis less than 1mm thick.3. Drill any additional holes required for cables and fit them with suitable grommets or bushings.4. Secure the metal cradle cover to the mounting points with the M5 self-tapping screws supplied,or with M5 nuts and bolts. Ensure that tightening the screws or bolts does not distort the cradle.To Reassemble the Cradle1. Reassemble the cradle by clipping one plastic side moulding to each side of the mounted metalcover (as shown in Figure 3). Take care to locate the ribs on the plastic part in the slots on theshoulders of the metal cover. They will only fit one way round.2. Take the remaining metal cover and fit it over the exposed edge of the side mouldings, againtaking care to align the ribs with the slots. Clip it securely home.Figure 3 Cradle ReassemblyAntenna InstallationRF Exposure HazardThis radio generates Radio Frequency energy during transmission and is designed tocomply with FCC RF exposure limits for occupational use in a controlled environ-ment. For installation and training information, refer to the “FCC RF Exposure Lim-its” information sheet that comes with this radio.Table of ContentsSoftware licence agreement...............................................................................................................3Components of the T2000II Radio Kit..............................................................................................6Recommended Installation Tools......................................................................................................6Installation of your Radio..................................................................................................................6Occupant’s Safety .......................................................................................................................7To Disassemble the Cradle .........................................................................................................7Mounting ...........................................................................................................................................7To Reassemble the Cradle................................................................................................................ 8Antenna Installation ..........................................................................................................................8RF Exposure Hazard ...................................................................................................................8Wiring .............................................................................................................................................. 9External Speaker ........................................................................................................................ 9Power Cable .............................................................................................................................10External Wire (Horn/Hush/Emergency)..........................................................................................10Remote Control Head Option..........................................................................................................10Microphone Clip .............................................................................................................................11Installation Checks ........................................................................................................................ 11WARNING

Navigation menu