TandD 50060 Wireless LAN Thermo Recorder User Manual 05 Short Term Confidential 3 compliance info REV

TandD Corporation Wireless LAN Thermo Recorder 05 Short Term Confidential 3 compliance info REV

Contents

05 (Short-Term Confidential) User Manual-3_compliance_info_REV

Regarding the Use of Wireless LAN Products 16704930002 (1st Edition)
http://www.tandd.com/
Precautions when Installing Wireless Communication Devices
Wireless LAN signals are affected by device placement and interference caused by other environmental factors. The
following factors can especially cause an unstable wireless connection, please be mindful of them when deploying
devices.
Physical Objects:
Placing the unit far from a wireless LAN access point
and/or near to obstacles (such as metal objects,
concrete, plants, etc.) may lead to a poor wireless
connection.
Electrical Interference:
Placed near cooking equipment such as microwave
ovens or communication devices that generate
electromagnetic waves.
Access Point Capacity:
Having many devices connected to one access point
simultaneously.
Regarding how many wireless devices can simultaneously connect to
an access point and still maintain stable connections, please contact
the manufacturer of the wireless access point.
Channel Congestion:
Using multiple wireless LAN access points with the
same communication frequency channel.
Change the wireless LAN access point settings to assign a non-over-
lapping channel to each access point.
Note: If unstable wireless connection continues, not only will more data transmission errors occur, but battery life will also be shortened.
Compliance Information
For FCC Model
FCC and IC Statement
This device complies with Part 15 of the Federal Communications Commission (FCC) rules and RSS-210 of the Industry Canada (IC). Operation is
subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Ce dispositif est conforme à la norme RSS 210 d’Industrie Canada.
L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif
doit être prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communi-
cations. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interfer-
ence by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Continued on Back Page.
To comply with the limits for the Class B digital device, pursuant to Part 15 of the FCC Rules, this device must be installed in computer equipment
All cables used to connect the computer and peripherals must be shielded and gr
cables may result in interference to radio or television reception.
Caution:
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
For CE Model
CE Statement
Important Notice
Wireless products cannot be used in countries other than where those products have been approved for use, according to that country's wireless
regulations.
T&D Corporation shall in no manner whatsoever take responsibility for the usage of these products, nor be liable in any manner for legal conse-
quences stemming from the usage of these wireless products in unapproved areas.
電波法に関するご注意
本製品は、電波法に基づく特定小電力無線機器として、技術基準適合証明（利用に関してはお客様の免許申請等が不要）
を受けています。 必ず次の点を守ってお使いください。
• 分解・改造をしないでください。 分解・改造は法律で禁止さ れています。
• 技術基準適合ラベルははがさないでください。 ラベルのないものの使用は禁止されています。
無線 LAN の電波に関して
TR-7wf シリーズにおける無線 LAN の使用周波数帯では、電子レンジ等の産業・科学・医療用機器のほか工場の製造ライン等で使用されて
いる移動体識別用の構内無線局（免許を要する無線局）及び特定小電力無線局（免許を要しない無線局）並びにアマチュア無線局（免許を
要する無線局）が運用されています。
1. この機器を使用する前に、近くで移動体識別用の構内無線局及び特定小電力無線局並びにアマチュア無線局が運用されていないことを確
認して下さい。
2. 万一、この機器から移動体識別用の構内無線局に対して有害な電波干渉の事例が発生した場合には、速やかに使用周波数を変更するか又
は電波の発射を停止した上、下記連絡先にご連絡頂き、混信回避のための処置等（例えば、パーティションの設置など）についてご相談
して下さい。
3. その他、この機器から移動体識別用の特定小電力無線局あるいはアマチュア無線局に対して有害な電波干渉の事例が発生した場合など何
かお困りのことが起きたときは、弊社までお問い合わせ下さい。
連絡先：ティアンドデイオンラインサポート http://www.tandd.co.jp/support/
電波の種類と干渉距離
2.4 2.4GHz 帯を使用する無線設備を表します。
DS DS-SS 方式を表します。
4 想定される干渉距離が 40m 以下を表します。
全帯域を使用し、かつ移動体識別装置の帯域の回避が可能な事を表します。
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF)
Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed
to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the
radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).
Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles les
radioélectriques (RF) de la FCC lignes directrices d'exposition et d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet
équipement émet une énergie RF très faible qui est considérée conforme sans évaluation de l’exposition maximale autorisée. Cependant, cet
équipement doit être installé et utilisé en gardant une distance de 20 cm ou plus entre le dispositif rayonnant et le corps (à l’exception
des extrémités : mains, poignets, pieds et chevilles).
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF)
Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the
radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).
Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles les
radioélectriques (RF) de la FCC lignes directrices d'exposition et d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet
équipement doit être installé et utilisé en gardant une distance de 20 cm ou plus entre le dispositif rayonnant et le corps (à l’exception des
extrémités : mains, poignets, pieds et chevilles).

Navigation menu