TandD 50060 Wireless LAN Thermo Recorder User Manual 05 Short Term Confidential 3 compliance info REV

Download:
Mirror Download [FCC.gov]
Document ID	2103061
Application ID	29LkSRzdN7QjlZJ6StZU4w==
Document Description	05 (Short-Term Confidential) User Manual-3_compliance_info_REV
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	195.97kB (2449597 bits)
Date Submitted	2013-10-28 00:00:00
Date Available	2014-03-30 00:00:00
Creation Date	2013-09-24 14:38:44
Producing Software	Adobe PDF Library 9.0
Document Lastmod	2013-10-28 11:40:33
Document Title	05 (Short-Term Confidential) User Manual-3_compliance_info_REV
Document Creator	Adobe InDesign CS4_J (6.0.6)

Regarding the Use of Wireless LAN Products
16704930002 (1st Edition)
http://www.tandd.com/
Precautions when Installing Wireless Communication Devices
Wireless LAN signals are affected by device placement and interference caused by other environmental factors. The
following factors can especially cause an unstable wireless connection, please be mindful of them when deploying
devices.
Physical Objects:
Placing the unit far from a wireless LAN access point
and/or near to obstacles (such as metal objects,
concrete, plants, etc.) may lead to a poor wireless
connection.
Electrical Interference:
Placed near cooking equipment such as microwave
ovens or communication devices that generate
electromagnetic waves.
Access Point Capacity:
Having many devices connected to one access point
simultaneously.
Channel Congestion:
Using multiple wireless LAN access points with the
same communication frequency channel.
Regarding how many wireless devices can simultaneously connect to
an access point and still maintain stable connections, please contact
the manufacturer of the wireless access point.
Change the wireless LAN access point settings to assign a non-overlapping channel to each access point.
Note: If unstable wireless connection continues, not only will more data transmission errors occur, but battery life will also be shortened.
Compliance Information
For FCC Model
FCC and IC Statement
This device complies with Part 15 of the Federal Communications Commission (FCC) rules and RSS-210 of the Industry Canada (IC). Operation is
subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Ce dispositif est conforme à la norme RSS 210 d’Industrie Canada.
L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif
doit être prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Continued on Back Page.
To comply with the limits for the Class B digital device, pursuant to Part 15 of the FCC Rules, this device must be installed in computer equipment
All cables used to connect the computer and peripherals must be shielded and gr
cables may result in interference to radio or television reception.
Caution:
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
This equipment
equipment complies with
This
with FCC/IC
FCC/IC radiation
radiation exposure
exposure limits
limitsset
setforth
forthfor
foran
anuncontrolled
uncontrolledenvironment
environmentand
andmeets
meetsthe
theFCC
FCCradio
radiofrequency
frequency(RF)
(RF)
Exposure Guidelines and RSS-102 of the IC radio frequency (RF)
(RF) Exposure
verybelow
levels of
RFoperated
energy that
it deemed
Exposure rules.
rules. This
This equipment
equipment has
should
installed
and
keeping
the
to
comply
maximum
(MPE).extremities:
But it is desirable
it should
beankles).
installed and operated keeping the
radiator
at without
least 20cm
or morepermissive
away fromexposure
person’s evaluation
body (excluding
hands, that
wrists,
feet and
radiator
at least 20cm
or moreaux
away
fromd’exposition
person’s body
extremities:
hands,
feet and ankles).
Cet équipement
est conforme
limites
aux(excluding
rayonnements
énoncées
pourwrists,
un environnement
non contrôlé et respecte les règles les
Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles les
radioélectriques (RF) de la FCC lignes directrices d'exposition et d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet
radioélectriques (RF) de la FCC lignes directrices d'exposition et d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet
équipement doit
utilisé
gardant
uneconsidérée
distance de
20 cm ou
plusévaluation
entre le dispositif
rayonnant
et le corps
(à l’exception
des cet
équipement
émetêtre
uneinstallé
énergieetRF
trèsen
faible
qui est
conforme
sans
de l’exposition
maximale
autorisée.
Cependant,
extrémités
mains,
poignets,
pieds
et
chevilles).
équipement doit être installé et utilisé en gardant une distance de 20 cm ou plus entre le dispositif rayonnant et le corps (à l’exception
des extrémités : mains, poignets, pieds et chevilles).
For CE Model
CE Statement
Important Notice
Wireless products cannot be used in countries other than where those products have been approved for use, according to that country's wireless
regulations.
T&D Corporation shall in no manner whatsoever take responsibility for the usage of these products, nor be liable in any manner for legal consequences stemming from the usage of these wireless products in unapproved areas.
電波法に関するご注意
本製品は、電波法に基づく特定小電力無線機器として、技術基準適合証明（利用に関してはお客様の免許申請等が不要）
を受けています。 必ず次の点を守ってお使いください。
• 分解・改造をしないでください。 分解・改造は法律で禁止さ れています。
• 技術基準適合ラベルははがさないでください。 ラベルのないものの使用は禁止されています。
無線 LAN の電波に関して
TR-7wf シリーズにおける無線 LAN の使用周波数帯では、電子レンジ等の産業・科学・医療用機器のほか工場の製造ライン等で使用されて
いる移動体識別用の構内無線局（免許を要する無線局）及び特定小電力無線局（免許を要しない無線局）並びにアマチュア無線局（免許を
要する無線局）が運用されています。
1. この機器を使用する前に、近くで移動体識別用の構内無線局及び特定小電力無線局並びにアマチュア無線局が運用されていないことを確
認して下さい。
2. 万一、この機器から移動体識別用の構内無線局に対して有害な電波干渉の事例が発生した場合には、速やかに使用周波数を変更するか又
は電波の発射を停止した上、下記連絡先にご連絡頂き、混信回避のための処置等（例えば、パーティションの設置など）についてご相談
して下さい。
3. その他、この機器から移動体識別用の特定小電力無線局あるいはアマチュア無線局に対して有害な電波干渉の事例が発生した場合など何
かお困りのことが起きたときは、弊社までお問い合わせ下さい。
連絡先：ティアンドデイオンラインサポート http://www.tandd.co.jp/support/
電波の種類と干渉距離
2.4
DS
2.4GHz 帯を使用する無線設備を表します。
DS-SS 方式を表します。
想定される干渉距離が 40m 以下を表します。
全帯域を使用し、かつ移動体識別装置の帯域の回避が可能な事を表します。

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2013:09:24 14:38:44+09:00
Creator                         : Adobe InDesign CS4_J (6.0.6)
Modify Date                     : 2013:10:28 11:40:33+09:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2013:10:28 11:40:33+09:00
Creator Tool                    : Adobe InDesign CS4_J (6.0.6)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 11974 bytes, use -b option to extract)
Instance ID                     : uuid:100c3c31-f8eb-4fe8-98c0-a0d067b2a3fe
Original Document ID            : xmp.did:6C1F5F7FEAF4E21187A2B323F2CF33C6
Document ID                     : xmp.did:D3FED1A29100E3118201822BA7518118
Rendition Class                 : proof:pdf
History Action                  : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:6C1F5F7FEAF4E21187A2B323F2CF33C6, xmp.iid:6D1F5F7FEAF4E21187A2B323F2CF33C6, xmp.iid:6E1F5F7FEAF4E21187A2B323F2CF33C6, xmp.iid:6F1F5F7FEAF4E21187A2B323F2CF33C6, xmp.iid:65217FDD45FBE211ABF59AF541C1521D, xmp.iid:66217FDD45FBE211ABF59AF541C1521D, xmp.iid:E706064E46FBE2118B21FF04B726FF5D, xmp.iid:C18ED0D987FDE211B85C82B78B3976E0, xmp.iid:C28ED0D987FDE211B85C82B78B3976E0, xmp.iid:8348FD8A03FFE21190ADF3FDFE0407D8, xmp.iid:8548FD8A03FFE21190ADF3FDFE0407D8, xmp.iid:8648FD8A03FFE21190ADF3FDFE0407D8, xmp.iid:8848FD8A03FFE21190ADF3FDFE0407D8, xmp.iid:8A48FD8A03FFE21190ADF3FDFE0407D8, xmp.iid:8B48FD8A03FFE21190ADF3FDFE0407D8, xmp.iid:D4FED1A29100E3118201822BA7518118, xmp.iid:D5FED1A29100E3118201822BA7518118, xmp.iid:D6FED1A29100E3118201822BA7518118, xmp.iid:D8FED1A29100E3118201822BA7518118, xmp.iid:C5A6167FD315E311ABB0D7BE1D9C6633, xmp.iid:C7A6167FD315E311ABB0D7BE1D9C6633, xmp.iid:D4DB9EF1C516E311AB15A4D56AF81139, xmp.iid:D5DB9EF1C516E311AB15A4D56AF81139, xmp.iid:7FAC7E7BDB24E3118E65C937AAD4A523
History When                    : 2013:07:25 14:24:37+09:00, 2013:07:25 15:59:05+09:00, 2013:07:25 15:59:05+09:00, 2013:07:25 17:40:09+09:00, 2013:08:02 16:33:46+09:00, 2013:08:02 16:33:46+09:00, 2013:08:02 16:36:54+09:00, 2013:08:05 13:31:09+09:00, 2013:08:05 13:57:19+09:00, 2013:08:07 11:00:13+09:00, 2013:08:07 11:01:18+09:00, 2013:08:07 11:03:41+09:00, 2013:08:07 11:05:21+09:00, 2013:08:07 13:41:20+09:00, 2013:08:07 13:44:48+09:00, 2013:08:09 10:29:06+09:00, 2013:08:09 10:29:06+09:00, 2013:08:09 10:42:20+09:00, 2013:08:09 10:45:18+09:00, 2013:09:05 11:33:14+09:00, 2013:09:05 11:36:08+09:00, 2013:09:06 16:29:26+09:00, 2013:09:06 16:30:14+09:00, 2013:09:24 14:38:03+09:00
History Software Agent          : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0
History Changed                 : /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /, /, /, /, /
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 72.00, 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:6690c371-c92e-4814-8cd6-5253774b05cf, uuid:6fab4cc0-65e5-49dc-ad08-563754fc8a41, uuid:ca711cff-515c-4c3f-93d0-26b8e65065c2, uuid:be1fb19c-8619-4d7e-af05-8dc7a9560f65
Manifest Reference Document ID  : xmp.did:BFCB98F3FCF4E2119E08F8026DEF590D, xmp.did:C0CB98F3FCF4E2119E08F8026DEF590D, xmp.did:4EEEC3753DFBE211B6C6A3143D114DE6, xmp.did:4FEEC3753DFBE211B6C6A3143D114DE6
Doc Change Count                : 126
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.0
Trapped                         : False
Page Count                      : 2
For                             : �ۚ� ����,
Title                           : compliance_info.pdf
Bounding Box                    : 0 0 613 859
Container Version               : 11
Creator Version                 : 14
Image Height                    : 859
Image Width                     : 613
Image Size                      : 613x859
Megapixels                      : 0.527

EXIF Metadata provided by EXIF.tools