Tandberg E5714 Users Manual Evolution 5000 E57xx DSNG And DENG Voyager Encoder

2015-02-03

• Preliminary Pages
  • List of Contents
  • About this Manual
  • Nomenclature
  • Acknowledgements
  • Warnings, Cautions and Notes
  • EMC Compliance
  • Contact Information
• Chapter 1: Introduction to the Basic Encoder
  • Scope of this Manual
    • Who Should Use This Manual
    • Build Version
    • What Equipment is Covered by This Manual
      • Equipment Models
      • Information Label
      • Hardware Configuration
      • Build Revision
  • Role of the Encoder in a System
    • Typical System
    • DSNG Systems
      • Overview
      • E5714
      • E5740/E5760
    • DENG Systems
  • Summary of Features
    • Video Encoding
      • MPEG-2 Encoding
      • Video Encoding Modes
      • Video Inputs
      • Video Input Types
      • Serial Digital Video Input Error Detection and Handling (EDH)
      • Video Encoding Functions
      • Motion Estimation
      • Variable Video Bit-rate
      • Coding Resolutions
      • Internal Frame Synchroniser
      • Output on Video Loss
    • Audio Encoding
      • General
      • Audio Inputs
      • Audio Channels
      • MPEG Encoding Modes
      • Dolby Digital (AC-3) Encoding Modes
      • Test Tones
      • Audio Variable Bit-rate
      • Dolby Digital (AC-3)
    • Vertical Blanking Interval (VBI) Line Processing Modes
      • Introduction
      • VBI in Picture
      • VBI User Data
      • VBI in PID
      • Teletext Extraction
    • Data Channels
    • Outputs
    • IF Modulation
      • E5714
      • E5740
      • E5715/E5750
    • Control and Monitoring
    • Options and Upgrades
  • Guided Tour
    • Enclosure
    • The User Interface
    • Front Panel Description
      • Front Panel Display, Navigation Keys, Softkeys, Keyboard
      • Power Supply Stand-by Switch
    • Rear Panel Description
      • Introduction
      • 1U Chassis
      • 2U Chassis
    • Boards in the Basic Encoder
• Chapter 2: Installing the Equipment
  • Introduction
    • Read This First!
    • General
    • Site Requirements
      • Power Supplies
      • Environment
      • Lightning Protection
    • EMC Compliance Statements
      • EN 55022 / AS/NZS 3548
      • FCC
  • Preliminary Checks
    • Mechanical Inspection
    • Moving the Equipment Safely
  • Installing the Equipment
    • Fixing Method
    • Cable Routing
    • Equipment Access
    • Ventilation
  • AC Mains Operating Voltage and Earthing
    • AC Power Supply
    • Power Cable and Earthing
      • General
      • Protective Earth/Technical Earth
      • Connecting the Encoder to the AC Power Supply
  • DC Operating Voltage and Earthing
    • DC Power Supply
    • DC Power Cable and Earthing
      • General
      • DC Power Connector (Encoder)
  • Signal Connections For the Basic Unit
    • Introduction
    • Connecting Up the Basic Encoder
    • Power Supply
    • Technical Earth
    • Video Inputs
      • SDI IN
      • H SYNC
      • COMP VIDEO
    • Audio Inputs
    • ASI OUT 1, 2 and 3 Outputs
    • Control Interfaces
      • Connection
      • Ethernet #1 and #2
      • Alarm
      • Remote Control
    • Data
      • RS-232 Connector
      • RS-422 Connector
    • Satellite Modulator IF Output (E5714 and E5740 IF)
      • IF Out (Main)
      • IF Out (Monitor)
    • Satellite Modulator L-Band Output (E5740 LBAND)
      • L-Band In
      • L-Band Out (Main)
      • L-Band Out (Monitor)
      • Up-Converter Power
    • OFDM Modulator Outputs (E5715 and E5750)
      • IF Out 1
      • IF Out 2
  • Powering Up/Down
    • Before Powering Up
    • Powering Up
    • Powering Down
  • Setting the Encoder IP Address
    • Methods of Changing the Encoder IP Address
    • From the Front Panel Menus
    • Via Telnet
• Chapter 3: Options and Upgrades
  • What’s Available
    • Option Functions
    • Limitations on Number of Option Modules (2U Only)
      • Overview
      • E5740 Option Slots
      • E5750 Option Slots
    • Limitations on Use of Option Modules
    • How to See Which Options are Fitted/Enabled
  • Bit-rate Limits With Reflex Licence and/or Performance Upgrade
  • Basic Interoperable Scrambling System - BISS (M2/EDCOM2/BISS)
  • Additional Audio and Linear PCM Option (M2/EOM2/AUDLIN)
    • Overview
    • Assembly
      • Rear Panel
      • Audio In Connector
  • RS-232 and RS-422 Data Input Option (M2/EOM2/DAT)
    • Overview
    • Assembly
      • Rear Panel
      • Async Connector
      • Sync Connector
  • Remux Option (M2/EOM2/REMUX)
    • Overview
    • Assembly
      • Rear Panel
      • DVB ASI IN 1, 2 and 3 Connectors
      • DVB ASI OUT 1 Connector
    • Stages of Remultiplexing
    • Function of Remultiplexer
    • Using the Remultiplexer
    • ATSC Remultiplexing
    • Setting Bit-rates and Avoiding Overflow
    • What to do if Overflow Occurs
  • XLR Expander Card Option (M2/EOM2/XLR)
    • Overview
    • Audio Inputs Receiver
    • Audio Outputs Transmitter
    • Assembly
      • Rear Panel
      • Audio In Connector
      • Audio Out Connector
  • SD Decoder Option (M2/EOM2/DEC)
    • Overview
    • Assembly
      • Rear Panel
      • ASI Out
      • SDI Video Out
      • Composite Video Output
      • Audio Output
      • RS-232/RS-422 Data Output
  • QPSK Demodulator (M2/EOM2/QPSKDEMOD)
    • Overview
    • Assembly
      • Rear Panel
      • IF In
      • RF In
  • 16QAM Demodulator (M2/EOM2/SATDEMOD)
    • Overview
    • Assembly
      • Rear Panel
      • L-Band Inputs
  • IP Output Card (M2/EOM2/IP)
    • Overview
    • Assembly
      • Rear Panel
      • ASI In
      • RS-232 Control
      • ASI Out
      • Ethernet Output
  • Software Options
    • M2/ESO2/NR
    • M2/ESO2/PU
    • M2/ESO2/VBR
    • M2/ESO2/422
    • M2/ESO2/RAS
    • M2/ESO2/ACON
    • M2/ESO2/AC3
    • M2/ESO2/SM38PSK
    • M2/ESO2/SM316QAM
    • M2/ESO2/8PSKDEMOD
    • M2/ESO2/16QAMDEMOD
    • M2/ESO2/LSYM
• Chapter 4: Operating the Equipment Locally
  • Introduction
  • Establishing Local Control (1U)
  • Navigating the Display Screens (1U)
    • Introduction
    • Navigating the Menus (1U)
    • Changing a Setting (1U)
      • Overview
      • For Multiple Choice Entry
      • For Text or Numeric Entry
    • A(udio)/V(ideo) Menu (1U)
  • Establishing Local Control (2U)
    • Input Monitor
    • Summary Screen
    • A(udio)/V(ideo) Menu (2U)
    • Keyboard Lock (2U)
  • Navigating the Display Screens (2U)
    • Moving Through the Menu Screens
    • How to Use the Keypad
    • How to Use the Functions Associated with Softkeys
    • Display Screens
    • Menu Formats
    • Summary Screen and Advanced Menus
  • Setup Menu
  • System Menu
    • Introduction
    • Service Info Menu (Syntax = ATSC)
      • Overview
      • Short Channel Name Option
      • Long Channel Name Option
      • Syntax Option
      • SI Level Option
      • Major Channel Option (3.0 and later)
      • Minor Channel Option (3.0 and later)
      • Program Number Option
      • Service Type Option (3.0 and later)
      • PMT PID Option
      • DST Start Date Option (3.0 and later)
      • DST End Date Option (3.0 and later)
    • Service Info Menu (Syntax = DVB)
      • Overview
      • Network Name Option
      • Service Provider Option
      • Service Name Option
      • Syntax Option
      • SI Level Option
      • Network Id Option
      • Service Id Option
      • Transport Stream Id Option
      • Service Type Option (3.0 and later)
      • PMT PID Option
      • Dolby AC-3 Descriptor Option (3.0 and later)
      • Logical Chan Desc Option
      • Logical Channel Option
    • Remote Control Menu
      • Overview
      • IP Address Option
      • MAC Address Option
      • Network Mask Option
      • Gateway Address Option
      • SNMP Master Option
      • Last SNMP Master Option
      • Last SNMP Poll Option
      • SNMP Trap IP Option
      • SABus Address Option
      • Serial Protocol Option
      • SABus Baud Rate Option
      • SABus Data Bits Option
    • General Menu
      • Overview
      • Model Number Option
      • Config Name Option
      • Local Time Option
      • Local Date Option
      • UTC Offset Option
      • Temperature Option
      • Screen Saver Option
      • Keypress Beep Option
      • Power Dip Recovery Option
      • Upgrade Encoder Option
      • Software Release Option
      • Fan Control Option
    • Advanced Menu
      • Overview
      • Setup Password Option
      • Current Password Option
      • Display Errors Option
      • System Control Option
      • Action On PID Error Option
      • SNMP Control Option
      • Display Contrast Option
      • No. Services Option (3.1 and later)
      • Reset On Download Option
      • Reset Encoder Option
    • Build Menu
  • Video Menu
    • Introduction
    • Video Source Menu
      • Overview
      • Video Input Option
      • Input Source Select
      • Frame Rate Option
      • Video Locked Option
      • Ident Text Option
      • Text Colour Option
      • Background Colour Option
      • Video Bandwidth Option
      • OP Video Loss Option
      • Input Termination Option
      • Noise Reduction Option
      • Default 625 Config and Default 525 Config
      • Logo Option (When Logo Downloaded into Unit)
      • Time Code Option
    • Video Encoder Menu
      • Overview
      • Profile/Level Option
      • Compression Mode Option
      • Bit-rate Option
      • VBR Mode Option
      • Delay Option
      • Resolution Option
      • Aspect Ratio Option
      • AFD Option
      • GOP Structure Option
      • GOP Length Option
      • Long GOPs Option (3.1 and later)
      • Field/Frame Option
      • 3:2 Pulldown Option
      • Concatenation Option
      • PID Option
      • Reflex Enable Option
      • Copyright Option
      • Original Option
      • Bandwidth Option
      • Encoder Type Option
      • S/W Release Option
    • Vertical Blanking Interval (VBI) Menu
      • Overview
      • Teletext (All lines) Option
      • Teletext Data Out Option
      • Teletext PID Option
      • VBI on PID Option
      • VBI PID Option
      • VBI In Picture Option
      • VPS (Line 16) Option
      • WSS (Line 23) Option
      • Closed Caption Option
      • CC Format Option
      • Auto Detect VITC Option
      • VBI Line ‘n’ Option
  • Audio Menu
    • Overview
    • Audio A and B Menus
      • Introduction
      • Source Option
      • Coding Standard Option
      • Audio Bit-rate Option
      • Input Level L Option
      • Input Level R Option
      • Coding Mode Option
      • Auto Lip Sync Option
      • Lip Sync Offset Option
      • Audio Delay Option
      • External Delay Option
      • Clip Level Option
      • Impedance Option
      • Language or Language Left/Right Option
      • SMPTE 302M Standard Option
      • Channel Option
      • Bit Stream Mode Option
      • Dialogue Level Option
      • Dolby Srnd Mode Option
      • Production Info Option
      • Mixing Level Option
      • Room Type Option
      • Copyright Option
      • Original Option
      • Dynamic Range Option
      • RF Protection Option
      • Deemphasis Option
      • DC Filter Option
      • Low Pass Filter Option
      • Embedded 1-2 DID Option
      • Embedded 3-4 DID Option
      • Audio PID Option
      • Hardware Release Option
      • Software Release Option
    • Audio Languages Menu
    • Audio XLR Menus (3.0 and later)
      • Input Format Option
      • Input Termination Option
      • Input Clip Level Option
      • Output Source Option
      • Output Format Option
      • Output FSR Option
      • Firmware Release Option
      • Hardware Release Option
  • Data Menu
    • Introduction
    • Data A - RS232 Menu (3.0 and later)
      • Encoding Option
      • Baud Rate Option
      • RS232 PID Option
      • Delay Option
      • SNMP oid index Option
    • Data B - RS422 Menu
      • Encoding Option
      • Bit-rate Option
      • RS422 PID Option
      • Test Mode Option
      • Delay Option
      • D Mode Option
      • SNMP oid index Option
      • Version Option
    • Data XA - RS232 Menu (When M2/EOM2/DAT Fitted)
      • Overview
      • Hardware Release Option
      • Software Release Option
    • Data XB – RS422 Menu \(M2/EOM2/DAT Fitted\)
      • Overview
      • Hardware Release Option
      • Software Release Option
  • Output Menu
    • Overview
    • Output Format Option
    • Delivery Descriptor Menu
    • Descriptor Type Option
    • Descriptor Type = Terrestrial
      • Band Plan Option
      • Channel Option
      • Frequency Option
      • Bandwidth Option
      • Modulation Type Option
      • Hierarchy Option
      • FEC (HP) and FEC (LP) Options
      • Guard Interval Option
      • Carriers Options
      • Other Frequency Option
    • Descriptor Type = Cable
      • Frequency Option
      • Modulation Type Option
      • FEC (Outer) Option
      • FEC (Inner) Option
      • Symbol Rate Option
    • Descriptor Type = Satellite
      • Frequency Option
      • Modulation Type Option
      • FEC (Inner) Option
      • Symbol Rate
      • Orbital Position Option
      • West East Option
      • Polarisation Option
    • Output Format = Satellite Modulator (IF Output)
      • IF Output Option
      • IF Power Option
      • IF Frequency Option
      • Modulation Option
      • Mod Type Option
      • Symbol Rate Option
      • FEC Rate Option
      • Spectrum Invert Option
      • Roll Off Factor Option
      • Tx Bandwidth Factor Option
      • Tx Bandwidth Option
      • Bit-rate (188) Option
      • Bit-rate (204) Option
      • Preset Pwr Low Option
      • Preset Pwr Norm Option
      • Sat Deliv Freq Option
      • Sat Orb Pos Option
      • Sat West/East Option
      • Polarisation Option
      • Status Only Options for the Satellite Modulator Menu
    • Output Format = Satellite Modulator (L-Band Output) (3.1 and later)
      • L-Band Output Option
      • L-Band Power Option
      • Frequency Option
      • Modulation Option
      • Mod Type Option
      • Symbol Rate Option
      • FEC Rate Option
      • Spectrum Invert Option
      • Roll Off Factor Option
      • Tx Bandwidth Factor Option
      • Tx Bandwidth Option
      • Bit-rate (188) Option
      • Bit-rate (204) Option
      • Preset Pwr Low Option
      • Preset Pwr Norm Option
      • Upconverter Power
      • Sat Deliv Freq Option
      • Sat Orb Pos Option
      • Sat West/East Option
      • Polarisation Option
      • Status Only Options for the Satellite Modulator Menu
    • Output Format = OFDM Modulator (3.1 and later)
      • Output Option
      • Bandwidth Option
      • Modulation Mode Option
      • Guard Interval Option
      • FEC Rate Option
      • Transmission Option
      • Spectral Pol Option
      • Centre Frequency Option
      • IF Output Frequency
      • Bit-rate (188)
      • Bit-rate (204)
      • OFDM S/W Release
    • Output Format = IP Streamer (3.1 and later)
      • Own IP Address Option
      • Network Mask Option
      • Router IP Address Option
      • Destination IP Address Option
      • Destination UDP Port Option
      • TS Pkts/UDP Frm Option
      • Multicast IP Address Option
      • Time To Live Option
      • Type of Service Option
  • Mux Menu
    • Overview
    • Mux Output, no Remux Card
    • Mux Output, With Remux Card
    • Packet Length Option
    • On Air Option
    • Bit-rate (188) and Bit-rate (204) Option
    • Clock
    • PCR PID Option
    • FPGA Firmware
    • RAS Firmware
    • BISS Hardware
    • BISS Firmware
    • RAS Options Enabled
      • Scramble Option
      • SNG Key (RAS1) Option
    • BISS Options Enabled
      • Overview
      • Scramble Option
      • BISS Key Entry Option
      • Session Word Option
      • Enc Session Word Option
      • BISS-E Injected Id Option
  • Remux
    • Introduction
    • Addition to Mux Menu When Remux Fitted
      • Host Bit-rate Option
    • Remux Module Menu
      • Remux Mode Option
      • Packet Length Option
      • Bit-rate Option
      • Status Only Options for the Remux Module Menu
    • 1.Service/2.Service Menu
      • Output Option
      • Source (BNC) Option
      • Short Name In Option
      • Short Name Out Option
      • Name (In) Option
      • Name Out Option
      • Service Prov (In) Option
      • Service Provider Option
      • Service Id (Out) Option
      • Program Number (Out) Option
      • Major Channel Option
      • Minor Channel Option
      • Logical Channel Option
      • CA Input Option
      • BISS Key Code Option
      • Enc Session Word Option
      • Session Word Option
      • PMT PID Option
      • PCR PID Option
      • Video Option
      • ECM (CA) PID Option
      • VBI PID Option
      • Audio (Type of Audio) Option
      • Data (Type of Data) Option
      • Teletext Option
  • IRD Menu (3.1 and later)
    • Overview
    • IRD Mode Option
    • IRD TS Source Option
    • IRD Demod Menu
      • Frequency Option
      • Symbol Rate Option
      • FEC Rate Option
      • Polarisation Option
      • Sat Input Option
      • Modulation Option
      • LNB Option
      • LNB Lo Freq Option
      • LNB Hi Freq Option
      • LNB Switch Freq Option
      • LNB Supply
      • Search Range Option
      • BER Threshold Option
      • Status Only Options for the IRD Demod Menu
    • Service List Menu
    • IRD Video Menu
      • Stop Mode Option
      • Aspect Ratio Option
      • Video Output Source Option
      • 525 Line Composite Option
      • 625 Line Composite Option
      • Rate Buffer Mode Option
      • Video Default Output Option
      • EDH Enable Option
      • Embedded Audio Mode Option
      • Embed Data ID Option
      • Video PID
    • IRD Audio 1 and Audio 2 Menus
      • Audio Stream
      • Audio Routing Option
      • Default Language Option
      • Downmix Mode Option
      • Mute State Option
      • Audio Output Option
      • Left Sys Clip Option
      • Right Sys Clip Option
      • Status Only Options for the IRD Audio Menu
    • IRD CA Menu
      • Overview
      • DSNG Key Option
      • BISS Mode Option
      • Session Word Option
      • Enc Session Word Option
    • IRD VBI Menu
      • VITS Enable Option
      • CCVC Enable Option
      • VITC Enable Option
      • GCR Enable Option
      • Status Only Options for the IRD VBI Menu
    • IRD Data Menu
      • Async Stream Option
      • Async Baudrate
      • Sync Stream Option
      • Sync Bitrate
      • Subtitle Stream Option
      • Subtitles Language Option
      • Subtitles Type Option
      • Subtitles Enable Option
      • Teletext Stream Option
    • IRD System Status Menu
  • Errors Menu
    • Overview
    • Active Errors Option
    • Error Masks Menu
      • Status of Error Masks
      • Restore Defaults
  • Diagnostics Menu
  • Configs Menu
    • Accessing the Menu
    • Overview
    • Active Configuration
    • User Configurations
    • Backup Configurations
    • Factory Default Configurations
    • Configuration, Write-Protection
    • Quick Configuration From the Summary Screen
    • Load Active Config Option
    • Store Active Config Option
    • Load Configs From Backup Option
    • Store Configs in Backup Option
    • Factory 525 Defaults Option
    • Factory 625 Defaults Option
• Chapter 5: Web Browser Interface
  • Introduction
  • How to Set Up Internet Explorer For the Web Browser Interface
  • Web Browser Interface Options
  • Cloning a File
• Chapter 6: Preventive Maintenance and Fault-finding
  • Introduction
  • Preventive Maintenance
    • Routine Inspection - Cooling Fans
    • Cleaning
    • Servicing
      • Damage Requiring Service
      • Replacement Parts
      • Checks on Completion of Servicing
  • Maintenance and Support Services
    • Introduction
    • Warranty
    • Levels of Continuing TANDBERG Television Service Support
  • Errors and Diagnostics Menus – When to Use Them
    • Error Messages
    • Diagnostics Menu
      • Introduction
      • LCD Display Test
      • Keyboard Test
      • Fail Relay Test
      • Alarm Relay Test
      • Alarm LED Test
      • Buzzer Test
  • Fault-finding
    • Fault-finding Philosophy
    • Preliminary Checks
    • User Accessible Fuse Replacement
    • Video Fault-finding
      • Fault Symptoms
      • Breaks in Transmission
      • Noise Reduction
    • Audio Fault-finding
    • Mux Fault-finding
  • Rate Buffer Setting
  • Field/Frame Pictures
  • Power Supply Problems/Green LED on Front Panel Unlit
    • Symptoms
    • Power LED Unlit
    • Fan(s) Not Working/Overheating
  • Disposing of This Equipment
    • General
    • Lithium Batteries
• Annex A: Glossary
• Annex B: Technical Specification
  • Inputs
    • Video
      • SDI
      • H SYNC
      • Analogue Video Specification
      • Encoder Settings for PAL/NTSC Video Performance Figures
      • PAL Video Performance Figures
      • NTSC Video Performance Figures
      • Teletext Extraction
      • International Television Standards
    • Audio
      • Analogue and Digital Audio
      • Embedded Audio (Via SDI)
  • Test Tones
  • Outputs
    • IF Outputs (1U, E5714)
    • IF Outputs (E5740-IF)
    • L-Band Outputs (E5740-LBAND)
    • OFDM Modulator Outputs (E5750)
    • ASI Out 1, ASI Out 2, ASI Out 3 Outputs
  • Control and Monitoring
    • Remote Control - Ethernet 1 and 2
    • Local Control
    • Alarm
    • Remote Control
    • RS-232 Data (Asynchronous)
    • RS-422 Data
  • Power Supply
    • AC Power Input
    • DC Power Input
  • Physical Details
  • Environmental Conditions
  • Compliance
    • Safety
    • EMC
    • Shock and Vibration
    • CE Marking
    • C-Tick Mark
  • Cable Types
  • Option Modules
    • M2/EOM2/AUDLIN Additional Audio and Linear PCM Option Module
    • M2/EOM2/DAT RS-232 and RS-422 Data Input Option
      • Asynchronous Data Input
      • Synchronous Data Input
    • M2/EOM2/REMUX Remux Option Module
      • Connectors
      • LEDs
    • M2/EOM2/XLR, XLR Expander Card Option
    • M2/EOM2/DEC, SD Decoder Card Option
    • M2/EOM2/QPSKDEMOD, QPSK Demodulator Card Option
    • M2/EOM2/SATDEMOD, 16QAM Demodulator Card Option
    • M2/EOM2/IP, IP Output Card Option
• Annex C: Predefined User configurations
  • Introduction
  • 525/625 Line Default Settings
  • General Default Settings
  • Predefined User Configurations
• Annex D: Language Abbreviations
• Annex E: Creating and Downloading a Logo
  • Introduction
  • Summary of Features
  • OSD Programs Built Into the Encoder
  • Creating a Logo Using OSD Creator
  • Using OSD Creator
    • Overview
    • Loading a .bmp File
    • Creating Transparency
      • Overview
      • Adding Transparency Manually
      • Adding Transparency Using a Key File
      • Editing the Palette
      • Palette Reallocation
    • Downsampling
    • Saving the .osd File
  • Downloading a Logo Using OSD Loader
  • Using the OSD Loader
    • Start-up
    • Download an .osd File
    • Show and Hide Regions
    • Multiple Regions
    • Region Interference
  • Fault-finding
• Annex F: Band Plans
  • Channels and Centre Frequencies
• Annex G: Audio Modes
  • Analogue Audio
  • Digital Audio
  • Embedded Audio on the SDI
  • Detail of Encoder Operation
• Annex H: Error Messages
  • Introduction
  • Dealing with Error Messages
  • General Errors
  • Video Source Related Errors
  • VBI Related Errors
  • Remote Control Related Errors
  • Data Related Errors
  • Video Encoder Related Errors
  • Audio Related Errors
  • Satellite Modulator Related Errors
  • Remux Related Errors
• Annex I: Accuracy of Frequency Sources
• Annex J: Use of Remux Card in ASTC
  • Remux Card In ATSC With Internal PSIP
  • Remux Card In ATSC With External PSIP
• Annex K: EDH Capability for E57xx Encoders
  • EDH Capability for E57xx Encoders
• Indexes