Targus 000019 2.4G wireless Presenter User Manual Manual

Targus Group International, Inc. 2.4G wireless Presenter Manual

Manual

User Guide
Targus Multimedia Presentation Remote2IntroductionThank you for your purchase of the Targus Multimedia Presentation Remote. This combination remote, with laser pointer and cursor control, works with both Microsoft PowerPoint® and Apple Keynote®. This cordless remote also offers true plug-n-play capability with no need for software drivers, whilst the long range 2.4 GHz technology allows for effective presentations up to 50 feet (15 m).System RequirementsHardware• USB portOperating System • Microsoft Windows® 2000• Microsoft Windows® XP• Microsoft Windows Vista®• Microsoft Windows7®• Mac OS® X 10.4 or laterContents• Targus Multimedia Presentation Remote• Mini USB receiver• 2 x AAA batteries• User guide
Targus Multimedia Presentation Remote3Setting Up Your RemoteInstalling the BatteriesPress the battery cover release button to open the battery cover and carefully lift the cover as shown.BatteryCoverInsert the supplied batteries, making sure the positive (+) and negative (-) ends of the batteries match the polarity indicators inside the battery compartment.Spare battery compartmentBattery coverrelease button
Targus Multimedia Presentation Remote4NOTE: THE SPARE BATTERY COMPARTMENT PROVIDES CONVENIENT STORAGE FOR A SEPARATE BATTERY (INCLUDED) WHICH CAN BE USED FOR EMERGENCY POWER.Remove the mini USB receiver stored inside the center compartment.Slide the battery cover back into position until it “clicks” firmly into place.
Targus Multimedia Presentation Remote5Using Your RemoteBefore using the remote, please select your computer type and preferred presentation software. Locate the switch inside the battery compartment as shown.PC PowerPoint®Mac KeyNote®Mac PowerPoint®This remote is a plug-n-play device. It will automatically operate when the USB receiver is connected to the computer. Plug the mini USB receiver into any available USB port on your computer.NOTE: SELECT “PC POWERPOINT” IF YOU USE A COMPUTER MADE BY: HP/COMPAQ, DELL, TOSHIBA, GATEWAY, PANASONIC, FUJITSU, SONY, IBM/LENOVO, ACER, ASUS, ETC.
Targus Multimedia Presentation Remote6Turn on the remote by pressing and holding the on/off power button for 3 seconds.
Targus Multimedia Presentation Remote71.2.3.4.5.6.7.8.9.10.11.12.Keys and FunctionsThis device can function as a presenter or a wireless mouse by using the mode switch (12).1Power buttonPress and hold for 3 seconds to turn on the remote.LED ring will turn green.Press and hold for 3 seconds to turn off the remote.LED ring will shut off.
Targus Multimedia Presentation Remote8Using the device - Presenter mode2Blank screen button The screen will become blank/dark.3Slide showStart - Press once to begin.Stop - Press and hold for 2 seconds to stop the slide show.4Page Forward/Next slide Press once to go to next slide.5Page Backward/Previous slide Press once to go back one slide.6Laser pointer Laser light is emitted from the opening.7LED ring Power and KeyLockTM indicator.8KeyLock buttonPress once to enable KeyLock function.- Disables all keys except the laser, page forward/ next slide and page backward/previous slide buttons.- LED ring will become RED.Press once to exit the KeyLock function.- LED ring will return to GREEN.9Laser pointer button Press and hold to activate the laser pointer.10 Volume up button Press to increase the volume.11 Volume down button Press to decrease the volume.
Targus Multimedia Presentation Remote94Right mouse click Right mouse click.5Left mouse click Left mouse click.6Joystick Moves the mouse cursor.7LED ring Power indicator.8KeyLock button Disabled in mouse mode.9Joystick Pressing the joystick resembles left mouse click.10 Volume up button Press to increase the volume.11 Volume down button Press to decrease the volume.Using the device - Mouse mode
Targus Multimedia Presentation Remote10Safety Measures• To avoid possible eye damage, never point the remote’s laser at people, especially their faces, or look directly into the remote’s laser beam.• Avoid pointing the remote’s laser beam at a mirror or other highly-reective surface.• Keep the remote away from young children.• Never view the remote’s laser beam using telescopic devices, such as a microscope or binoculars.• Any attempt to disassemble, adjust or repair the remote may result in exposure to laser light or other safety hazards.TroubleshootingWhat do I do if the response time of the remote is slow or it intermittently stops working?• Make sure that the remote is within 50 feet (15 m) of the mini USB receiver and computer.• Increase the distance between the remote’s receiver and the base units of other wireless devices.• Turn off any wireless devices and their base units that are near the remote’s receiver.• Replace the battery.
Targus Multimedia Presentation Remote11Regulatory ComplianceThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.Technical SupportFor technical questions, please visit:US Internet: www.targus.com/support.aspAustralia Internet: www.targus.com/au Email: infoaust@targus.com Telephone: 1800-641-645New Zealand Telephone: 0800-633-222Product RegistrationTargus recommends that you register your Targus accessory shortly after purchasing it. Go to:http://www.targus.com/registration.aspYou will need to provide your full name, email address, country of residence and product information.WarrantyTargus warrants this product to be free from defects in materials and workmanship for one year. If your Targus accessory is found to be defective within that time, we will promptly repair or replace it. This warranty does not cover accidental damage, wear and tear, or consequential or incidental loss. Under no conditions is Targus liable for loss of, or damage to devices; nor loss of, or damage to, programs, records, or data; nor any consequential or incidental damages, even if Targus has been informed of their possibility. This warranty does not affect your statutory rights.
Targus Multimedia Presentation Remote13AVOID EXPOSURE--HAZARDOUS ELECTROMAGNETIC RADIATION EMITTED FROM THIS APERTURE.LASER RADIATION. DO NOT STARE INTO THE BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. CLASS 2 LASER PRODUCT.NEVER POINT A LASER BEAM INTO A PERSON’S EYES OR VIEW A LASER BEAM DIRECTLY, AS PROLONGED EXPOSURE CAN BE HAZARDOUS TO THE EYES. MOMENTARY EXPOSURE FROM A LASER POINTER, SUCH AS AN INADVERTENT SWEEP OF THE LIGHT ACROSS A PERSON’S EYES, MAY CAUSE TEMPORARY FLASH BLINDNESS SIMILAR TO THE EFFECT OF A CAMERA FLASH BULB. ALTHOUGH THIS CONDITION IS TEMPORARY, IT CAN BECOME MORE DANGEROUS IF THE EXPOSED PERSON IS ENGAGED IN A VISION-CRITICAL ACTIVITY SUCH AS DRIVING.CAUTION: ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.THIS DEVICE AND ITS ANTENNA(S) MUST NOT BE CO-LOCATED OR OPERATING IN CONJUNCTION WITH ANY OTHER ANTENNA OR TRANSMITTER. YOUR DEVICE CONTAINS A LOW POWER TRANSMITTER. WHEN DEVICE IS TRANSMITTED IT SENDS OUT RADIO FREQUENCY (RF) SIGNAL. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
410-1680-001A / AMP09US1 YEAR LIMITED WARRANTY: We pride ourselves on the quality of our products. For complete warranty details and a list of our worldwide offices, please visit www.targus.com. Features and specifications are sub-ject to change without notice. All trademarks and reg-istered trademarks are the property of their respective owners. All rights reserved. ©2009 Manufactured or imported by Targus Group International, Inc. (for U.S. sales: 1211 North Miller Street, Anaheim, CA 92806 USA) whose Australian sales representative is Targus Australia Pty. Ltd., 117-119 Bowden Street, Meadow-bank, NSW 2114 AustraliaN2953

Navigation menu