Targus 000038 2.4GHz Wireless Presenter User Manual Manual

Targus Group International, Inc. 2.4GHz Wireless Presenter Manual

Manual

N2953410-2554-001A / AMP21USUser GuideGREEN LASER PRESENTER1 YEAR LIMITED WARRANTY: We pride ourselves on the quality of our products. For complete warranty de-tails and a list of our worldwide ofces, please visit www.targus.com. Features and specications are subject to change without notice. Microsoft, Windows, Windows Vistaand PowerPoint are registered trademarks or trade-marks of Microsoft Corporation in the United States and/or other countries. All trademarks and registered trade-marks are the property of their respective owners. ©2012 Targus Group International, Inc.
Targus Green Laser Presenter2Targus Green Laser Presenter3IntroductionCongratulations on your purchase of the Targus Green Laser Presenter. This presenter features four control buttons that emulate the command keys in PowerPoint®. It offers true plug-and-play capability with no need for software drivers and the 2.4 GHz technology allows for effective presentations up to 50 feet (15 m).System RequirementsHardware• USB interfaceOperating System • Microsoft Windows® 2000• Microsoft Windows® XP• Microsoft Windows Vista®• Microsoft Windows® 7Package Contents• Green Laser Presenter• Mini Wireless Receiver• 2 x AAA batteries• User guide
Targus Green Laser Presenter4Targus Green Laser Presenter5Installing the BatteryIf the presenter is on, slide the on/off switch located on the side of the presenter to the “off” position.Setting up your Wireless PresenterInsert the supplied battery, making sure the positive (+) and negative (-) ends of the battery match the polarity indicators inside the battery compartment.Battery CoverTurn on the presenter.Slide the battery cover back into position until it “clicks” rmly into place.A A A
Targus Green Laser Presenter6Targus Green Laser Presenter7Connecting the ReceiverPlug the USB receiver into an open USB port on your computer. Your computer’s operating system will identify the receiver and install the default driver.Turn on the remote by sliding the On/Off power button.This remote is a plug and play device. It will automatically operate when the USB receiver is connected to the computer. Plug the mini USB receiver into any available USB port on your computer.Battery CoverUSB Receiver
Targus Green Laser Presenter8Targus Green Laser Presenter9Previous pageNext pageDark screenFull screenLaser buttonUsing your Wireless Presenter• To avoid possible eye damage, never point the presenter’s laser at people, especially their faces, or look directly into the presenter’s laser beam.• Avoid pointing the presenter’s laser beam at a mirror or other highly-reective surface.• Keep the presenter away from young children.• Never view the presenter’s laser beam using telescopic devices, such as a microscope or binoculars.• Any attempt to disassemble, adjust or repair the presenter may result in exposure to laser light or other safety hazards.What do I do if the response time of the presenter is slow or it intermittently stops working?• Make sure that the presenter is within 50 feet (15 m) of its receiver.• Increase the distance between the presenter’s receiver and the base units of other wireless devices.• Turn off any wireless devices and their base units that are near the presenter’s receiver.• Replace the battery.Safety MeasuresTroubleshootingBattery indicatorBattery Life Indicator• During normal operation, the battery indicator light is green• The battery indicator light will turn red when less than 30% of the battery power remains.• When the power drops below 10%, the battery indicator light will start ashing red.• To avoid performance issues, replace the batteries as soon as possible when the indicator light starts ashing.
Targus Green Laser Presenter10Targus Green Laser Presenter11Product SpecicationRF 2.400GHz-2.483GHzBattery Type AAA batteryEffective RFCommunication Range15 metres maxRF output power 1 mW maxPower Consumption 30 mA maxTransmitterReceiverRF 2.400GHz-2.483GHzInterface USB 1.1/2.0Power USB Bus Powered 5V DCRegulatory ComplianceThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.Technical SupportFor technical questions, please visit:Product RegistrationTargus recommends that you register your Targus accessory shortly after purchasing it. Go to:http://www.targus.com/registration.aspYou will need to provide your full name, email address, country of residence and product information.WarrantyTargus warrants this product to be free from defects in materials and workmanship for one year. If your Targus accessory is found to be defective within that time, we will promptly repair or replace it. This warranty does not cover accidental damage, wear and tear, or consequential or incidental loss. Under no conditions is Targus liable for loss of, or damage to devices; nor loss of, or damage to, programs, records, or data; nor any consequential or incidental damages, even if Targus has been informed of their possibility. This warranty does not affect your statutory rights.US Internet: www.targus.com/support.aspAustralia Internet: www.targus.com/au Email: infoaust@targus.com Telephone: 1800-641-645New Zealand Telephone: 0800-633-222
Targus Green Laser Presenter12Targus Green Laser Presenter13FCC StatementTested to ComplyThis equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna;• Increase the separation between the equipment and receiver;• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;• Consult the dealer or an experienced radio/TV technician for help.Changes or modications not authorized by the party responsible for compliance could void the user’s authority to operate this product.Declaration of ConformityHereby, Targus, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.Microsoft, Windows, and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. All trademarks and registered trademarks are the property of their respective owners. All rights reserved. Features and specications are subject to change without notice. © 2012 Targus Group International, Inc. and Targus, Inc.AVOID EXPOSURE--HAZARDOUS ELECTROMAGNETIC RADIATION EMITTED FROM THIS APERTURE.LASER RADIATION. DO NOT STARE INTO THE BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. CLASS 2 LASER PRODUCT.NEVER POINT A LASER BEAM INTO A PERSON’S EYES OR VIEW A LASER BEAM DIRECTLY, AS PROLONGED EXPOSURE CAN BE HAZARDOUS TO THE EYES. MOMENTARY EXPOSURE FROM A LASER POINTER, SUCH AS AN INADVERTENT SWEEP OF THE LIGHT ACROSS A PERSON’S EYES, MAY CAUSE TEMPORARY FLASH BLINDNESS SIMILAR TO THE EFFECT OF A CAMERA FLASH BULB. ALTHOUGH THIS CONDITION IS TEMPORARY, IT CAN BECOME MORE DANGEROUS IF THE EXPOSED PERSON IS ENGAGED IN A VISION-CRITICAL ACTIVITY SUCH AS DRIVING.CAUTION: ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.THIS DEVICE AND ITS ANTENNA(S) MUST NOT BE CO-LOCATED OR OPERATING IN CONJUNCTION WITH ANY OTHER ANTENNA OR TRANSMITTER. YOUR DEVICE CONTAINS A LOW POWER TRANSMITTER. WHEN DEVICE IS TRANSMITTED IT SENDS OUT RADIO FREQUENCY (RF) SIGNAL. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

Navigation menu