Targus 000038 2.4GHz Wireless Presenter User Manual Manual
Targus Group International, Inc. 2.4GHz Wireless Presenter Manual
Targus >
Manual
N2953
410-2554-001A / AMP21US
User Guide
GREEN LASER
PRESENTER
1 YEAR LIMITED WARRANTY: We pride ourselves on
the quality of our products. For complete warranty de-
tails and a list of our worldwide ofces, please visit www.
targus.com. Features and specications are subject to
change without notice. Microsoft, Windows, Windows
Vistaand PowerPoint are registered trademarks or trade-
marks of Microsoft Corporation in the United States and/
or other countries. All trademarks and registered trade-
marks are the property of their respective owners. ©2012
Targus Group International, Inc.
Targus Green Laser Presenter
2
Targus Green Laser Presenter
3
Introduction
Congratulations on your purchase of the Targus Green Laser Presenter. This
presenter features four control buttons that emulate the command keys in
PowerPoint®. It offers true plug-and-play capability with no need for software
drivers and the 2.4 GHz technology allows for effective presentations up to 50
feet (15 m).
System Requirements
Hardware
• USB interface
Operating System
• Microsoft Windows® 2000
• Microsoft Windows® XP
• Microsoft Windows Vista®
• Microsoft Windows® 7
Package Contents
• Green Laser Presenter
• Mini Wireless Receiver
• 2 x AAA batteries
• User guide
Targus Green Laser Presenter
4
Targus Green Laser Presenter
5
Installing the Battery
If the presenter is on, slide the on/off switch located on the side of the presenter
to the “off” position.
Setting up your Wireless Presenter
Insert the supplied battery, making sure the positive (+) and negative (-) ends of
the battery match the polarity indicators inside the battery compartment.
Battery Cover
Turn on the presenter.
Slide the battery cover back into position until it “clicks” rmly into place.
A
A
A
Targus Green Laser Presenter
6
Targus Green Laser Presenter
7
Connecting the Receiver
Plug the USB receiver into an open USB port on your computer. Your
computer’s operating system will identify the receiver and install the default
driver.
Turn on the remote by sliding the On/Off power button.
This remote is a plug and play device. It will automatically operate when the
USB receiver is connected to the computer. Plug the mini USB receiver into
any available USB port on your computer.
Battery Cover
USB Receiver
Targus Green Laser Presenter
8
Targus Green Laser Presenter
9
Previous page
Next page
Dark screen
Full screen
Laser button
Using your Wireless Presenter
• To avoid possible eye damage, never point the presenter’s laser at people,
especially their faces, or look directly into the presenter’s laser beam.
• Avoid pointing the presenter’s laser beam at a mirror or other highly-reective
surface.
• Keep the presenter away from young children.
• Never view the presenter’s laser beam using telescopic devices, such as a
microscope or binoculars.
• Any attempt to disassemble, adjust or repair the presenter may result in
exposure to laser light or other safety hazards.
What do I do if the response time of the presenter is slow or it
intermittently stops working?
• Make sure that the presenter is within 50 feet (15 m) of its receiver.
• Increase the distance between the presenter’s receiver and the base units of
other wireless devices.
• Turn off any wireless devices and their base units that are near the
presenter’s receiver.
• Replace the battery.
Safety Measures
Troubleshooting
Battery indicator
Battery Life Indicator
• During normal operation, the battery indicator light is green
• The battery indicator light will turn red when less than 30% of the battery
power remains.
• When the power drops below 10%, the battery indicator light will start ashing
red.
• To avoid performance issues, replace the batteries as soon as possible
when the indicator light starts ashing.
Targus Green Laser Presenter
10
Targus Green Laser Presenter
11
Product Specication
RF 2.400GHz-2.483GHz
Battery Type AAA battery
Effective RF
Communication Range
15 metres max
RF output power 1 mW max
Power Consumption 30 mA max
Transmitter
Receiver
RF 2.400GHz-2.483GHz
Interface USB 1.1/2.0
Power USB Bus Powered 5V DC
Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) This device
must accept any interference received, including interference that may cause undesired
operation.
Technical Support
For technical questions, please visit:
Product Registration
Targus recommends that you register your Targus accessory shortly after purchasing it.
Go to:
http://www.targus.com/registration.asp
You will need to provide your full name, email address, country of residence and product
information.
Warranty
Targus warrants this product to be free from defects in materials and workmanship
for one year. If your Targus accessory is found to be defective within that time, we will
promptly repair or replace it. This warranty does not cover accidental damage, wear
and tear, or consequential or incidental loss. Under no conditions is Targus liable for
loss of, or damage to devices; nor loss of, or damage to, programs, records, or data; nor
any consequential or incidental damages, even if Targus has been informed of their
possibility. This warranty does not affect your statutory rights.
US Internet: www.targus.com/support.asp
Australia Internet: www.targus.com/au
Email: infoaust@targus.com
Telephone: 1800-641-645
New Zealand Telephone: 0800-633-222
Targus Green Laser Presenter
12
Targus Green Laser Presenter
13
FCC Statement
Tested to Comply
This equipment has been tested and found to comply with the limits of a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna;
• Increase the separation between the equipment and receiver;
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected;
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modications not authorized by the party responsible for compliance could
void the user’s authority to operate this product.
Declaration of Conformity
Hereby, Targus, declares that this device is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
Microsoft, Windows, and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries. All trademarks and registered trademarks are the property of their respective owners. All rights
reserved. Features and specications are subject to change without notice. © 2012 Targus Group International, Inc. and Targus,
Inc.
AVOID EXPOSURE--HAZARDOUS ELECTROMAGNETIC RADIATION EMITTED FROM THIS
APERTURE.
LASER RADIATION. DO NOT STARE INTO THE BEAM OR VIEW DIRECTLY WITH OPTICAL
INSTRUMENTS. CLASS 2 LASER PRODUCT.
NEVER POINT A LASER BEAM INTO A PERSON’S EYES OR VIEW A LASER BEAM DIRECTLY, AS
PROLONGED EXPOSURE CAN BE HAZARDOUS TO THE EYES. MOMENTARY EXPOSURE FROM A
LASER POINTER, SUCH AS AN INADVERTENT SWEEP OF THE LIGHT ACROSS A PERSON’S EYES,
MAY CAUSE TEMPORARY FLASH BLINDNESS SIMILAR TO THE EFFECT OF A CAMERA FLASH
BULB. ALTHOUGH THIS CONDITION IS TEMPORARY, IT CAN BECOME MORE DANGEROUS IF THE
EXPOSED PERSON IS ENGAGED IN A VISION-CRITICAL ACTIVITY SUCH AS DRIVING.
CAUTION: ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY
RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.
THIS DEVICE AND ITS ANTENNA(S) MUST NOT BE CO-LOCATED OR OPERATING IN
CONJUNCTION WITH ANY OTHER ANTENNA OR TRANSMITTER. YOUR DEVICE CONTAINS
A LOW POWER TRANSMITTER. WHEN DEVICE IS TRANSMITTED IT SENDS OUT RADIO
FREQUENCY (RF) SIGNAL. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO
OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.