Targus 000052 Targus Bluetooth 3.0 Keyboard User Manual DK 7200BI USER Menu 01

Targus Group International, Inc. Targus Bluetooth 3.0 Keyboard DK 7200BI USER Menu 01

Manual

DK-7200BI User Manual VER: 0.1  Page 1 of 10              Model Name  :  Targus Bluetooth 3.0 Keyboard   MODEL NO.    :    AKB35 (DK-7200BI)                   VERSION     :  0.1   DATE        :   2013.02.26  USER MANUAL
DK-7200BI User Manual VER: 0.1  Page 2 of 10  Version. # Revised Date  PIC  Remark 0.1 02/26/2013 Natural  Preliminary
DK-7200BI User Manual VER: 0.1  Page 3 of 10 Electrical Specification  1. Operating Voltage Keyboard supply voltage: 3.5V-5.5V (Inter-Lithium Battery or DC 5V)  2. Current Consumption Current use :< 5mA  3. Sleeping Mode 3.1 Timing to sleep mode: 10S (The time from all keys are free to the keyboard turn to sleeping mode) 3.2 Current during the sleeping mode :< 5mA (finally stable the current) 3.3 Wake up: press any key of the keyboard  4. Low-voltage indicate When the voltage below 3.7V, the LED light was flashing 1Hz, which means the power is low. (No action during sleeping model)  5 Wireless specifications 2.402-2.480GHz frequency coverage. GFSK RF transceiver High Speed RF link data rate Max. 1M bit/s
DK-7200BI User Manual VER: 0.1  Page 4 of 10 Key Function Chart  1. The keys function as the figure shows (for IPAD):
DK-7200BI User Manual VER: 0.1  Page 5 of 10 Operation Process                 Step 1 Push the power button to ON, and then the power indication Lamp is bright once. Keyboard power is on.    Step 2 Operate your PC to find remote Bluetooth device.  Step 3 Push the connect button to be found. Indicator Lamp is twinkling。  Step 4 PC find the Bluetooth keyboard, Setup the device go by PC.    Step 5 Use the keyboard freely.
DK-7200BI User Manual VER: 0.1  Page 6 of 10          Charge Process  General using when the keyboard power indication Lamp twinkle means the inter-battery is power low. You can charge keyboard as follow. Step 1   Insert the micro USB plug which cable has a micro USB plug and a type A USB plug into the keyboard micro USB socket.  Step 2 Insert the type A USB plug into a compatible USB socket which can supply DC5V, 500mA power.  Step 3 The charge indication Lamp on keyboard is yellow. It means keyboard is charging. Waiting …   IF the charge indications Lamp turn in blue, this means keyboard is full.    Step 4 When keyboard is full, you can cancel the cable connect.  Caution Please use the keyboard in human house only and keep away
DK-7200BI User Manual VER: 0.1  Page 7 of 10 water.  Children use the keyboard with guardian together is necessary.  Keep dry. Humidity, liquids, contain minerals that will corrode electronic circuits.  Don’t use or store in dusty, dirty areas.  Don’t store in hot areas. High temperature can shorten the life of electronic devices and warp or melt certain plastics.  Don’t store in very cold areas. Moisture can form inside the case, which may damage electronic circuit boards.  Don’t attempt to open the case. Non-expert handling of the device may damage the system.    Avoid dropping and strong impact.  FCC Statement   This equipment has been tested and found to comply with the
DK-7200BI User Manual VER: 0.1  Page 8 of 10 limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.  However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:   -Reorient or relocate the receiving antenna.   -Increase the separation between the equipment and receiver.   -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.   -Consult the dealer or an experienced radio/TV technician for help.  To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
DK-7200BI User Manual VER: 0.1  Page 9 of 10 (Example- use only shielded interface cables when connecting to computer or peripheral devices).   This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:   1) This device may not cause harmful interference, and   2) This device must accept any interference received, including interference that may cause undesired operation.    Caution!  The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.  Canada Statement     This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.   The device meets the exemption from the routine evaluation limits in section 2.5 of   RSS 102 and users can obtain Canadian information on RF exposure and compliance.
DK-7200BI User Manual VER: 0.1  Page 10 of 10 Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section   2.5 de RSS 102 et les utilisateurs peuvent obtenir l'information canadienne sur l'exposition et la conformité de rf.   Please feel free to contact information below for any questions you have regarding your product                     TARGUS CANADA LTD.           90 Admiral Blvd. Mississauga Ontario, L5T 2W1 Canada                   Tel: 905-564-9300  Fax: 905-564-9322

Navigation menu