Tatung IOT3352 IOT Gateway User Manual A gateway pptx
Tatung Company IOT Gateway A gateway pptx
Tatung >
User Manual
Basic Equipment IOT-3352 Gateway 2.4GHz Antenna AC power adaptor (Hardware Specification) Product Name A+ Processor AM3352 32-bit RISC, 600 MHz Memory and Storage Communication SDRAM Memory Flash Memory Wi-Fi Bluetooth (BT 4.0 BLE) 512M Bytes Samsung K4B4G1646E-BCK0 NAND Flash : 512M Bytes (MLC) MT29F4G08ABADAWP:D IEEE 802.11 b/g/n (support AP / station mode ) Wi-Fi module built in (BL Link: BL-R8723RD2) LTE (4G) USB Dongle (option: E3372h-510) Button Total 2 buttons: Software configurable LED Indicator Total 3 LED indicators: 2 for blue color LED ; 1 for dual color – Red/ Blue (Software configurable ) Power DC jack (ΦA: 2.1 mm ΦB: 5.5 mm) Antenna 1 swivel antenna (Wi-Fi) USB 2 (1 for 4G dongle), total 3A RJ45 1 (analog interfaced sensor) (IEEE 802.3 10/100Mpbs) Mechanical Case Dimension 6.97”/177mm(W) x 1.46”/37mm(H) x 4.53”/115mm(D) Accessory Power adaptor DC power adaptor (12V, 2A) Operating Temperature 32ºF/0ºC to 104ºF/40ºC Storage Temperature -10ºC/-14ºF to 60ºC/140ºF External I/O Environmental Software Environment Linux V3.6 & drivers Tatung Confidential Software Specification Software specification Communication External I/O Firmware Wi-Fi IEEE 802.11 b/g/n (support AP / station mode ) Button Total 2 buttons: GPIO Software configurable LED Indicator Total 3LED indicators: 2 for blue color LED ; 1 for dual color – Red/ Blue (GPIO Software configurable ) USB USB 2.0 standard driver (USB1: Host port ; USB2: Device port) RJ45 Ethernet PHY Bluetooth (BT 4.0 BLE) Wi-Fi auto connection Charge management Service Check Support BT GATT profile and Android beacon (MQTT Client、CoAP Server) Tatung Confidential Outlook Wi-Fi indicator Power indicator Alert indicator Wi-Fi Reset Gateway Reset Dimension: 6.97”/177mm(W) x 1.46”/37mm(H) x 4.53”/115mm(D) Tatung Confidential 按鍵與燈號(Button & LED Indicator): 按鍵與燈號 Button Function Gateway Reset Button Reset gateway Wi-Fi Reset Button Reset Wireless LED indicator Function Power Indicator (mono) Blue LED stays on after startup is complete Wi-Fi indicator (mono) Blue LED stays on after Wi-Fi is in AP and station mode Alert Indicator (dual) Gateway Alert: Red LED blink at 1Hz Wi-Fi alert: RED LED blink at 5Hz Function state: Blue LED stays on Tatung Confidential Installation Connect the power adapter to the receptor on the rear panel of the DAP-1353 and then plug the other end of the power adapter to a wall outlet or power strip. The power LED will turn ON to indicate proper operation. Tatung Confidential Appendix FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: To assure continued FCC compliance: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This radio transmitter (identify the device by certification number or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. NO. 1. Antenna Type Omni-Directional Model Name AN2400-5533RS Gain (Peak) 2.2 dBi
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : 3.1-702 Modify Date : 2017:05:18 13:38:02+08:00 Create Date : 2017:05:18 13:37:56+08:00 Metadata Date : 2017:05:18 13:38:02+08:00 Creator Tool : PDF reDirect v2 Format : application/pdf Title : A+ gateway ??©ú®Ñ_pptx Document ID : uuid:82e359d1-5eb4-4111-85be-1fb6ef0d18ec Instance ID : uuid:737bb924-c1b2-4454-aa1c-347c5daf8b60 Producer : EXP Systems LLC (www.exp-systems.com) Page Count : 7 Creator : PDF reDirect v2EXIF Metadata provided by EXIF.tools