Tatung KEN4-R STEREO DIGITAL WIRELESS AUDIO DONGLES (RECEIVER) User Manual 2

Tatung Company STEREO DIGITAL WIRELESS AUDIO DONGLES (RECEIVER) Users Manual 2

Contents

Users Manual 2

Wi AudioStreamUSER GUIDEJM-WAL45Professional Stereo Digital Wireless Audio DonglesSTEREO DIGITAL WIRELES
CONGRATULATIONS! Thank You For Choosing Jangus Music!Congratulations on your purchase of the Wi-AudioStream Professional Stereo Digital Wireless Audio Dongles.In this manual, you’ll nd information designed to help you understand the capability of your Wi-AudioStream as well as step-by-step explanation on how to install and operate your Wi-AudioStream professional stereo digital wireless audio dongles.Wi-AudioStreamCONGRATULATIONS
Getting Answers! We want you to get the most from your new Wi-AudioStream professional stereo digital wireless audio dongles! Simply logon to www.jangusmusic.com and access the powerful resources available online including instructional manuals and frequently asked questions.Our customer service support staff are ready to assist you with any question you may have. Your Wi-AudioStream comes with 90 days of telephone support and one year of service coverage. There are may ways to contact Jangus Music customer service support. E-Mail: support@jangusmusic.com Website: https://www.jangusmusic.com/support Technical support: (949) 526-4877 [949-JANGUS7]Wi-AudioStream3TECHNICAL SUPPORTENGLISH
Making Great Musical Gear Better!Jangus Music’s Wi-AudioStream JM-WAL45 professional stereo digital wireless audio dongles solution is the smallest, most advanced cable replacement technology available today that ts on the palm of your hand! This full function 2.4GHz point-to-point digital wireless audio solution provides up to 300 feet of secure, simultaneous un-compressed stereo 48KHz/16bit CD quality wireless audio connectivity without radio frequency (RF) interference with other wireless devices, signal loss, crackle or AC hum making it the best wireless solution for live performances and studio recording environments. This Patents-Pending, plug-and-play digital wireless audio solution replaces the traditional audio wire cable and provide easy and user friendly way to connect professional musical gear such as Mono and Stereo Ear-worn or Clip-on Microphones, Acoustic and Wind Instruments Microphones, In-ear Monitors, Studio Monitors Headphones and other analog audio devices to remote and hard to reach equipment such as Mixers, Ampliers, Speakers, Samplers, Hard Disk Recorders, Computers and more. Simply connect the audio source to the dongle size transmitter audio input jacks then connect the dongle size receiver to the In-ear monitors, Headphones, Mixer, Amplier, Speaker or computer audio input jacks and you are done!...INTRODUCTIONWi-AudioStream4
Meeting The Specs!The Wi-AudioStream transmitter small and rugged design, boasts three (3) different power up modes to support the following instruments connections: • Line-in (Stereo) • Stereo Microphones • Mono Microphones Each of the power up modes are congured to apply the appropriate input impedance and input voltage levels to best match the electrical characteristics of the instrument connected to the transmitter dongle. INTRODUCTIONWi-AudioStream5Transmitter (Tx)Receiver (Rx)Mono MICStereo MICStringed InstrumentsBrassInstrumentsWoodwinds InstrumentsStereo SystemMP3Smart PhoneMixersDJ GearDigital RecordersComputersAmpliersMixersStereo SystemDigital RecordersHeadphones & In-ear Monitors
Extreme Flexibility!The Wi-AudioStream boasts an interchangeable 1/4” (6.35mm) TRS stereo connector jack, 1/8” (3.5mm) stereo miniature jack, 2.5mm subminiature jack and XLR connectors for maximum connectivity with audio devices.The Wi-AudioStream power source exible design boasts an internal rechargeable battery for 6.5 hours of battery operations, powerful USB bus power connectivity to any USB equipped devices and optional ON-THE-GO AA battery power booster adapter for 19 hours of extended battery operations.INTRODUCTIONWi-AudioStream6XLR Unbalanced6.3mm TSR Stereo6.3mm TSR Mono3.5mm Stereo3.5mm Mono2.5mm Stereo2.5mm MonoRCAChargerUSB Bus Power3.5mm StereoAA Battery Power Booster
Creating Your Audio Matrix! Jangus Music’s built-in digital wireless audio signal patch routing feature allows users to re-rout the audio output signal from their instruments to up to 8 different Rx digital wireless receivers including Jangus Music’s JM-WHM01 digital wireless headphone audio monitoring system for private listening and performance monitoring with a simple press of the Link button located on the transmitter dongle. No more removing the patch-bay devices, disconnecting cables, and ipping I/O circuit boards!INTRODUCTIONWi-AudioStream7Tx 1In-ear Monitor Rx 1Headphone Rx 2Mixer Rx 4Computer Rx 5Rx 7Rx 3Digital Recorder Rx 6Compressor/Limiter/Gate/FXRx 8Amplier
What is included in the package?Verify that you have received all of the items listed below. Please visit our web site at www.jangusmsuic.com for additional accessories.PACKING LISTWi-AudioStream8Wi-Transmitter Wi-Receiver Universal AC Charger(QTY 2) 1/4” Mono Male to 1/8” Stereo Male Cable(QTY 2) 1/4” Stereo Male to 1/8” Stereo Male Y-split Cable Carrying BagUSB Y-Split Power CableUser Manualwww.jangusmusic.com
11121. Audio OUT Jack2. Power ON/OFF3. Link / Paring / VoIP4. Power/Status LED5. Volume UP6. Volume Down7. Mute/ Play/Pause8. Previous Track9. Next Track10. (VoIP) Microphone11. USB Charging Port 12. Belt Clip~ sABOUT YOUR JM-WAL45Wi-AudioStream91. Audio IN Jack2. Power ON/OFF3. Link / Paring4. Power/Status LED5. Volume UP6. Volume Down7. Mute8. Sleep9. MIC Mode10. USB Charging Port11. Belt Clip11jro nq p lm ku|}y {z wx v Wi Transmitter Wi Receiver
Transmitter Dongle Controls and Connectionsj Audio IN Jack: Provide stereo and mono connection for professional vocal and instruments capacitive microphones and any analog devices such as monitoring systems MP3 players, cell phones, stereo systems, computers and more... k Power ON/OFF: Press and hold the Power button for 2 seconds to turn ON or OFF the transmitterl Power/Status LED: The Power/Status LED display the status of six functions, ON/OFF, Battery Charging, Paring, Microphone Power, Mute and Sleeping mode statuses F Please refer to the “Function Matrix Table” section of this manual for more detailsm Volume UP: Press and hold the Volume UP for auto increments of the volume level Press the Volume UP once for step increments of the volume level n Volume DOWN: Press and hold the Volume DOWN for auto increments of the volume level Press the Volume DOWN button once for step increments of the volume level TRANSMITTER CONTROLSWi-AudioStream10
o Mute: Press and hold the Mute button for 3 seconds stop the audio transmission F Please refer to the “ “Function Matrix Table” section of this manual for more detailsp Link/Pair: The Link button performs two functions Paring and Linking. The Paring function allows the transmitter dongle to connect to up to 8 eight different receivers to create you own wireless audio matrix. Press and hold the Link button for 6 seconds until LED ash F Please refer to the “Paring Procedures” section of this manual for detailed instructions F Please refer to the “Audio Matrix Accessories” section of this manual for options listing The Link function allows the transmitter dongle to reroute the audio signal connect from the instrument to up to 8 eight different receivers previously paired with the transmitter. Press the Link button once and the transmitter will reroute the wireless connection to the next receiver. F Please refer to the “ “Function Matrix Table” section of this manual for additional information F Please refer to the “Audio Matrix Accessories” section of this manual for options listingTRANSMITTER CONTROLSWi-AudioStream11
Transmitter Dongle Controls and Connectionsq Sleep: The Sleep function button on the transmitter dongle is designed to prolong the battery life operations of the transmitter dongle by 50% as well as the receiver dongle battery life 35% when not in use. When the Sleep function on the transmitter is activated, the transmitter dongles sends a signal to the linked receiver dongle to go into a standby mode while switching to full sleep mode. The Sleep mode preserves the audio levels settings on both dongles as well as on the communications link between the transmit and the linked dongle. Press and hold the Sleep button for 3 seconds to switch the transmitter and the receiver dongles onto standby power save mode Press and hold the Sleep button for 3 seconds to wake-up the transmitter and the receiver dongles. F Please refer to the “Function Matrix Table” section of this manual for more details TRANSMITTER CONTROLSWi-AudioStream12
r MIC Power Mode: The MIC Mode multifunction button allows the user to choose between three different power up modes to support Stereo Capacitive Microphones, Mono Capacitive Microphones and Stereo Line -in to the transmitter dongle. To select the desired operations mode, press the MIC button for 2 seconds and until the blue LED change its ashing sequence then release, To cycle between the three modes, simply press and hold the MIC button and the transmitter will cycle between the three modes along with the Blue LED ashing sequence to each of the modes. Release the mode button once the desired mode setting is reached F Please refer to the “ “Function Matrix Table” section of this manual for detailed instructions . s Charging Port: The transmitter dongle utilizes mini USB connection to power up and charge the internal batteries. The transmitter dongle can be charged using the supplied universal AC charger, via the instrument built-in USB port or the optional AA battery power booster USB adapter. Belt Clip: The transmitter dongle can be attached to guitar strap, belt, shirts and pants pockets. The rigid small size light wight design is easy to ware without impeding your movement.TRANSMITTER CONTROLSWi-AudioStream1311
Receiver Dongle Controls and Connectionsu Audio OUT Jack: Provide a stereo connection for professional In-ear Monitors, Sound Systems Mixer Samplers, Computers Home Digital Theaters, Headphones and more...v Power ON/OFF: Press and hold the Power button for 2 seconds to turn ON or OFF the transmitterw Power/Status LED: The Power/Status LED display the status of ve functions, ON/OFF, Battery, Charging, Paring, Mute and Sleeping mode statuses F Please refer to the “ “Function Matrix Table” section of this manual for more detailsx Volume UP: Press and hold the Volume UP for auto increments of the volume level Press the Volume UP once for step increments of the volume level y Volume DOWN: Press and hold the Volume DOWN for auto increments of the volume level Press the Volume DOWN button once for step increments of the volume level RECEIVER CONTROLSWi-AudioStream14
z Link/VoIP: This multifunction button performs three functions, Paring, Linking and VoIP MIC activation. The VoIP function is covered in the VoIP Microphone on page 15. The Paring function allows the Receiver dongle to discovered by the Transmitter Dongle. Press and hold the Link button for 6 seconds until LED ash F Please refer to the “Paring Procedures” section of this manual for detailed instructions The Link function allows the transmitter dongle to reroute the audio signal connect from the instrument to up to 8 eight different receivers previously paired with the transmitter. Press the Link button once and the transmitter will reroute the wireless connection to the next receiver. F Please refer to the “Function Matrix Table” section of this manual for additional information{ Next Track: The Next Track function button is used with optional PC/MAC USB Transmitter dongle to remotely control the media player and sequencing software to jump to the next audio track on the play list. Press the Next Track button once to jump to the next audio track RECEIVER CONTROLSWi-AudioStream15
Receiver Dongle Controls and Connections| Previous Track: The Previous Track function button is used with optional PC/MAC USB Transmitter dongle to remotely control the media player and sequencing software to jump to the next audio track on the play list Press the Previous Track button once to jump to the previous audio track. F Please refer to the “Function Matrix Table” section of this manual for more details} Mute/Pause/Play: Press and hold this function button for 3 seconds stop the audio transmission F Please refer to the “Function Matrix Table” section of this manual for more details When the Receiver dongle is used with optional PC/MAC USB Transmitter dongle, the Mute/Pause/Play function will remotely control the media player and sequencing software to mute, pause or play to the audio track Press the Mute/Pause/Play button once to pause or play audio track. Press and hold the Mute/Pause/Play button for 3 seconds to mute/un-mute audio F Please refer to the “Function Matrix Table” section of this manual for more details RECEIVER CONTROLSWi-AudioStream16
~ VoIP Microphone: The Microphone on the Receiver dongle is used with optional PC/MAC USB Transmitter dongle for Voice over Internet Protocol (VoIP) communications. This powerful feature allow musicians to collaborate with each other over the internet F Please refer to the “Function Matrix Table” section of this manual for more details To activate the VoIP Microphone on the Receiver dongle, press the LINK / VoIP button once. The Blue LED on the reviver will turn ON when the VoIP mIC is activated. VoIP MIC is now ready for use on your PC or MAC with the optional USB Transmitter dongle Charging Port: The receiver dongle utilizes mini USB connection to power up and charge the internal batteries. The transmitter dongle can be charged using the supplied universal AC charger, via the instrument built-in USB port or the optional AA battery power booster USB adapter. Belt Clip: The receiver dongle can be attached to, belts, shirts and pants pockets when used with ear-worm MICs or in-ear professional personal monitors. The rigid small size light wight design is easy to ware without impeding your movement.RECEIVER CONTROLSWi-AudioStream171211
GETTING STARTEDWi-AudioStream18Ready, Charge, Go!Before using your new Wi-AudioStream professional digital wireless dongles, you need to fully charge the batteries on the dongles for approximately 2 hours.Charging 1. Plug the AC Charger into a power socket 2. Connect the USB Y-Split power cable into the USB port on the AC charger 3. Connect one of the two mini USB connectors into the Transmitter USB port 4. Connect the second mini USB connector into the Receiver USB port 5. The Power/Status LED will turn to solid Red ON 6. When charging is complete the Red LED will turn OFF 7. Remove the charging cable and adapter and store into the carrying casePOWERLINKAC ChargerUSB PortMini USB ConnectorUSB PortUSB Connector
PARINGWi-AudioStream19Paring the Wi-AudioStreamBefore using the Wi-AudioStream dongles with your instruments, you need to pair the transmitter dongle with the receiver dongle. Pairing will create connection between the transmitter dongle and receiver dongle. 1. First turn ON the transmitter (Tx) and the receiver (Rx) dongles by pressing and holding the POWER button , on each of the dongles for 2 seconds. 2. Press and hold the LINK button on the transmitter (Tx) dongle for 6 seconds. The Power/Status LED on the Transmitter will start ashing. The transmitter dongle is now in a Pairing mode and ready to search for receivers. 3. Press and hold the LINK button on the receiver (Rx) dongle for 6 seconds. The Power/Status LED on the receiver will start ashing. The receiver dongle is now in a Pairing mode and ready to be found by the transmitter dongle 4. Once the transmitter dongle pair with receiver dingle, the Power/Status LED on both devices will turn to solid Green 5. The Wi-AudioStream transmitter and receiver dongles are now ready for use.pk(Tx)pkzvzv(Rx)
Connecting Capacitive Microphones to Transmitter!The Wi-AudioStream transmitter support Mono and Stereo capacitive microphones connection. 1. First Locate you Ear-worn Microphones or your Mono/Stereo capacitive microphones you wish to connect to the Wi-AudioStream transmitter. 2. Connect the 1/8” stereo male end of the MIC cable into the “Audio Input” jack on the transmitter dongle. 3. Rout the audio cable beneath the belt clip as shown to prevent accidental disconnection of cable. 4. Place your Ear-worn MIC on your ear or attache the Mono/Stereo microphones to your shirt, guitar electric acoustic guitar, stringed, woodwinds, brass and other acoustic instruments. TRANSMITTER CONNECTIONWi-AudioStream20Belt ClipAudio CableAudio Input JackStereo Microphones
5. Verify if you are connecting a Mono or Stereo microphone to the transmitter. 5.1 For Stereo Microphones Connection a. Power up the transmitter by pressing and holing the POWER button for 2 seconds. b. Press and hold the MIC button for 2 seconds until the Blue starts to ash with slow ashes F The Power Status LED will show Slow Flashing Blue and Solid Green LEDs 5.2 For Stereo Microphones Connection a. Power up the transmitter by pressing and holing the POWER button for 2 seconds. b. Press and hold the MIC button for 2 seconds until the Blue starts to ash with fast ashes F The Power Status LED will show Fast Flashing Blue and Solid Green LEDs 6. Attache the Wi-AudioStream to you belt or pocket. F Please proceed to page 27 for the receiver connection TRANSMITTER CONNECTIONWi-AudioStream21rk(Tx)rkkr
Connecting Musical Instruments & Gear to Transmitter!The Wi-AudioStream transmitter support professional digital instruments connections such as Mixers, JD gear, MP3 player, Stereo systems Computers Media players, Smart Phones, Flat Screen Displays and any device with headphone jack. 1. For (Mono) connection locate the 1/4” mono to 1/8” stereo cable For (Stereo) connection locate the 1/4” stereo Y-split to 1/8” stereo cable 2. Connect the 1/8” stereo end of the cable into the “Audio Input” jack on the transmitter dongle. 3. Rout the audio cable beneath the belt clip as shown to prevent accidental disconnection of cable. TRANSMITTER CONNECTIONWi-AudioStream22Belt ClipAudio CableAudio Input Jack1/4” Mono to 1/8’ Stereo Cable
4. For (Mono) connection, connect the 1/4” mono male end of the cable to the left mono output (L/MONO) located on the back panel of the digital instrument. For (Stereo) connection, connect the two 1/4” male ends of the cable to the left (L/MONO) and right (R) outputs located on the back panel of the digital instrument. 5. Power up the transmitter by pressing and holing the POWER button k for 2 seconds until the Green LED and Blue turn ON F The Power Status LED will show Two Fast Blue LED ashes every 1 second and Solid Blue and Solid Green LEDs 6. Attache the Wi-AudioStream to you belt or pocket F Please proceed to page 24 for the receiver connection TRANSMITTER CONNECTION Wi-AudioStream23(L/MONO)Digital Instrumentk(R)(Tx)1/4” Stereo Y-Split to 1/8’ Stereo Cable
Connecting Analog and Digital Devices to Receiver!The Wi-AudioStream receiver support professional digital instruments connection such as Mixers, Ampliers, Speaker, Samplers, Hard Disk Recorders, Computers, Headphones, In-Ear professional personal monitors, Stereo Systems and more... Please note connections must be made with the power turned off. Please be aware that careless operation may damage your speaker system or cause malfunctions. If you’ve connected a stereo audio amp, be aware that playing at high volume may damage your speaker system. Be careful not to raise the volume excessively. Mixers, Ampliers, Hard Disk Recorders and Effects Pedals Connection 1. For (Mono) connection locate the 1/4” mono to 1/8” stereo cable For (Stereo) connection locate the 1/4” stereo Y-split to 1/8” stereo cable RECEIVER CONNECTIONWi-AudioStream24
2. Connect the 1/8” stereo end of the cable into the “Audio Input” jack on the transmitter dongle. 3. Rout the audio cable beneath the belt clip as shown to prevent accidental disconnection of cable 4. Connect the 1/4” male end of the cable to the inputs of your amplier, powered monitor or mixer. If you’re using the Wi-AudioStream receiver in stereo, use both the L/ MONO and R jacks on your samples or use two channels on your mixer or hard disk recorder.RECEIVER CONNECTIONWi-AudioStream25Belt ClipAudio CableAudio Output Jack1/4” Stereo Y-Split to 1/8’ Stereo CablePOWERLINKAmp or Power MonitorsAmp or Power MonitorsInputInput
5. Turn ON the receiver (Rx) dongles by pressing and holding the POWER button on the receiver dongle for 2 seconds. F The Power Status LED on the receiver (Rx) will show Solid Green LEDs F The ashing Green LED on the transmitter (Tx) will turn to Solid Green indicating communications between (Tx) and (Rx) is established. 6. Place the receiver (Rx) dongle on the amp as shown. Alternatively the receiver can be placed next to the Mixer, Digital Recorder or Sound System. 7. Power up your Amp, Mixer, Digital Recorder and are you are ready to go! RECEIVER CONNECTIONWi-AudioStream26zv(Rx)vPOWERLINK
Connecting Headphones and In-Ear Professional Personal Monitors! PLEASE PROTECT YOUR EARS! Prolonged use of headphones or In-Ear personal monitors at high volumes may affect your hearing capacity or may result in noise induced hearing loss (NHL). 1. Connect the 1/8” stereo connector end of your headphone or In-Ear personal monitor into the “Audio Output” jack on the receiver dongle. 1. Rout the audio cable beneath the belt clip as shown to prevent accidental disconnection of cable 1. Turn ON the receiver (Rx) dongles by pressing and holding the POWER button on the receiver dongle for 2 seconds. F The Power Status LED on the receiver (Rx) will show Solid Green LEDs F The ashing Green LED on the transmitter (Tx) will turn to Solid Green indicating communications between (Tx) and (Rx) is established. RECEIVER CONNECTIONWi-AudioStream27Belt ClipAudio CableAudio Output JackIn-ear Personal Monitorsvv(Rx)
Transmitter (Tx) Button Function Matrix!Function Button Activation Hold Time LED Status Power ON/OFF POWER Press and Hold 3 sec Solid GreenPairing Mode LINK Press and Hold 2 sec Fast Green FlashesSignal Re-routing LINK Click Click Volume UP/Down Click for Step, Press and hold for Auto Click Mute ON/OFF Press and Hold 2 sec Solid Green Blue FlashSleep / Wake up Press and Hold 3 sec 2 Green Flashes Line in Mode (Stereo) Press and Hold MIC Button 2 sec Solid Green LED and(Factory setting) Two Blue LED Flashes MIC Mode 1 (Stereo) Press and Hold MIC Button 2 sec Solid Green LED and Slow Blue LED Flashes MIC Mode 2 (Mono) Press and Hold MIC Button 2 sec Solid Green LED and Fast Blue LED FlashesTx FUNCTION MATRIX Wi-AudioStream28kp p mn o q r r r
Transmitter (Tx) LED Indicator Chart!Function LED Status Searching For Receiver Flashing GreenLinked to Receiver Solid GreenLow Battery Solid Green & Flashing Red Charging With Power OFF Solid Red Charging With Power ON Solid Red & Green Charging Complete Red OFF Tx LED INDICATOR CHARTWi-AudioStream29ro nq p lm kl l l l l l
Receiver (Rx) Button Function Matrix!Function Button Activation Hold Time LED Status Power ON/OFF POWER Press and Hold 3 sec Solid GreenPairing Mode LINK/VoIP Press and Hold 3 sec Fast Green FlashesVoice Over IP MIC LINK/VoIP Click (With Optional USB Tx Dongle) Click Solid Green & Blue Volume UP/Down Click for Step, Press and Hold for Auto Click Mute ON/OFF Press and Hold 3 sec Solid Green & Blue Play/Pause Click (With Optional USB Tx Dongle) Click Next Track Click (With Optional USB Tx Dongle) Click Prev Track Click (With Optional USB Tx Dongle) Click Rx FUNCTION MATRIX Wi-AudioStream30v z z xy}}{|
Receiver (Rx) LED Indicator Chart!Function LED Status Searching For Receiver Flashing GreenLinked to Receiver Solid GreenSleep 2 Green Flashes (Activated By Tx)Low Battery Solid Green & Flashing Red Charging With Power OFF Solid Red Charging With Power ON Solid Red & Green Charging Complete Red OFF Rx LED INDICATOR CHARTWi-AudioStream31|}y {z wx vw w w w w w w
Product Technical Specications!Specications Frequency: 2.4 GHz, 16bit, 48KHz Digital Wireless Communications Frequency Response: 10Hz to 20KhzCommunications Frequency Selection: Auto SelectS/N Ratio: More than 90 dB (A-weighted) for stereo line-in mode More than 82 dB (A-weighted) for stereo and mono MIC mode Audio Input / Output: 3.5mm Stereo Jack Max Input Level: 2Vrms Max Output Level: 700mVrms Input Impedance: 3.3K ohm Output Impedance: < 10 ohm Battery Life: 6.5 hoursBattery Type: Internal Rechargeable Batteries PRODUCT SPECIFICATIONS Wi-AudioStream32
Specications Battery Power Boost: 19.5 hours (With optional AA battery power booster adapter)USB Bus Power Yes Low Battery Alert: 15 Minutes of Life LeftPower-up Modes Three (3) Power-up Modes (Line-in Stereo, MIC Stereo, MIC Mono) Antenna: Internal AntennasRange: 150 to 300 Feet (May not be dependent on line of sight)Units operating at the same time: 12 Signal Patch Audio Matrix: One (1) transmitter can re-rout audio signal to eight (8) different receivers MAC/PC Compatible: Yes (With Optional USB Transmitter Dongle) VoIP Capable: Yes (With Optional USB Transmitter Dongle) 802.11g/n Network Safe: YesTransmitter Weight 0.068 lbsReceiver Weight 0.056 lbsDimensions 1.2” W x 0.6” D x 3.34” HPRODUCT SPECIFICATIONSWi-AudioStream33
Audio Matrix Accessories for Extreme Flexibility!Accessory Specications Wi-StudioM: Digital wireless studio monitors headphonesWi-USB Tx: Digital wireless USB transmitter for MAC/PC audio and VoIP applicationsWi-iPod Tx: Digital wireless transmitter for Apple iPodWi-AudioLink Tx: Digital wireless transmitter for Digital Pianos, Keyboards, Electric Guitars, Electric Acoustic Instruments, Digital Wind Instruments, Effects Pedals, Electronic Drums, Mixers, Ampliers, Speakers, Sound Systems, Samplers, Hard Disk Recorders, DJ Gear, Computers, Consumer Electronics products and more. Wi-AudioStream Tx: Digital wireless transmitter for Mono and Stereo microphones and personal monitoring systems including Ear-Worn Microphones, Clip-on Microphones, Acoustic, Brass and Woodwind Instruments Microphones, MP3 players and more.Wi-AudioLink Rx: Digital wireless transmitter for In-ear Personal Monitors, Studio Headphone Monitors, Effects Pedals, Mixers, Ampliers, Speakers, Sound Systems, Samplers, Hard Disk Recorders, DJ Gear, Computers, Consumer Electronics products and more. PRODUCT ACCESSORIESWi-AudioStream34
ACEESSORIESCable & Power Accessories for Extreme Flexibility!Accessory Specications Wi-BodyFree Guitar Strap: Guitar strap with built-in “Wi-PowerBooster” AA battery power booster adapter, “Wi-AudioLink” Rx receiver socket and cable routing management system for the ultimate in BodyFree wireless performance experience.Wi-PowerBooster: AA battery power booster USB adapter with white LED light for charging and extending the internal rechargeable batteries life on the Wi-Audiolink and Wi-AudioStream transmitters and receivers up to 19 hours.Wi-PowerAdapter: Universal USB power adapter for charging the Wi-Audiolink and Wi-AudioStream transmitters.Please visit our web site at www.jangusmusic.com for the optional cable connection accessoriesWi-AudioStream35
Disposal and Recycling Information!Correct Disposal This symbol indicates that your product must be disposed of properly according to the local laws and regulations. When your product reaches its end of life, contact the retailer where the product was purchased or your local authorities to learn about recycling options. This product should not be mixed with other commercial wastes for disposal.GREEN ENVIRONMENTWi-AudioStream36
Regulatory Compliance InformationCompliance Statement This device complies with part 15 of the FCC rules. Operations is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operations. Disclaimers This manual is published by Jangus Music, Inc. The information contained in this document is subject to change without notice. © 2009 Jangus Music, Inc. All rights reserved. Wi, Wi-AudioStream, Wi, Digital Wireless Stereo logos and Jangus Music logos are registered trademarks of Jangus Music, Inc. in the United States and may be registered trademark or trademarks in other countries. All other trademarks included herein are the property of their perspective owners.FCC NOTICESWi-AudioStream37
www.jangusmusic.com© 2009 Jangus Music, Inc. All rights reserved. Wi, Wi-AudioStream, Digital Wireless Stereo logo and Jangus Music logo are registered trademarks of Jangus Music, Inc. in the United States and may be registered trademark or trademarks in other countries. All other trademarks included herein are the property of their perspective owners.(Design and specications subject to change without notice).
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/ TV technician for help. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment.

Navigation menu