Tatung KEN4-R STEREO DIGITAL WIRELESS AUDIO DONGLES (RECEIVER) User Manual 2

Download:
Mirror Download [FCC.gov]
Document ID	1141627
Application ID	8duleon03Rnk1keUsF3bzw==
Document Description	Users Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	293.27kB (3665904 bits)
Date Submitted	2009-07-20 00:00:00
Date Available	2009-07-21 00:00:00
Creation Date	2009-07-17 16:46:44
Producing Software	Adobe PDF Library 8.0
Document Lastmod	2009-07-20 16:09:34
Document Title	Users Manual 2
Document Creator	Adobe InDesign CS3 (5.0.4)

J M-WA L 45
USER G U I D E
Wi AudioStream
Professional Stereo Digital Wireless Audio Dongles
DIGITAL WIRELES
S T E R E O
Wi-AudioStream
CONGRATULATIONS
CONGRATULATIONS!
Thank You For Choosing Jangus Music!
Congratulations on your purchase of the Wi-AudioStream Professional Stereo Digital Wireless Audio Dongles.
In this manual, you’ll find information designed to help you understand the capability of your
Wi-AudioStream as well as step-by-step explanation on how to install and operate your
Wi-AudioStream professional stereo digital wireless audio dongles.
Wi-AudioStream
TECHNICAL SUPPORT
We want you to get the most from your new Wi-AudioStream professional stereo digital wireless audio
dongles! Simply logon to www.jangusmusic.com and access the powerful resources available online including
instructional manuals and frequently asked questions.
Our customer service support staff are ready to assist you with any question you may have.
Your Wi-AudioStream comes with 90 days of telephone support and one year of service coverage.
ENGLISH
Getting Answers!
There are may ways to contact Jangus Music customer service support.
E-Mail:		
Website:		
Technical support:
support@jangusmusic.com
https://www.jangusmusic.com/support
(949) 526-4877 [949-JANGUS7]
Wi-AudioStream
INTRODUCTION
Making Great Musical Gear Better!
Jangus Music’s Wi-AudioStream JM-WAL45 professional stereo digital wireless audio dongles solution is the
smallest, most advanced cable replacement technology available today that fits on the palm of your hand!
This full function 2.4GHz point-to-point digital wireless audio solution provides up to 300 feet of secure,
simultaneous un-compressed stereo 48KHz/16bit CD quality wireless audio connectivity without radio
frequency (RF) interference with other wireless devices, signal loss, crackle or AC hum making it the best
wireless solution for live performances and studio recording environments.
This Patents-Pending, plug-and-play digital wireless audio solution replaces the traditional audio wire cable
and provide easy and user friendly way to connect professional musical gear such as Mono and Stereo Earworn or Clip-on Microphones, Acoustic and Wind Instruments Microphones, In-ear Monitors, Studio
Monitors Headphones and other analog audio devices to remote and hard to reach equipment such as
Mixers, Amplifiers, Speakers, Samplers, Hard Disk Recorders, Computers and more. Simply connect the
audio source to the dongle size transmitter audio input jacks then connect the dongle size receiver to the
In-ear monitors, Headphones, Mixer, Amplifier, Speaker or computer audio input jacks and you are done!...
Wi-AudioStream
INTRODUCTION
Meeting The Specs!
MP3
Mono MIC
Amplifiers
The Wi-AudioStream transmitter small and
rugged design, boasts three (3) different
Stereo MIC
power up modes to support the following
Smart Phone
instruments connections:
• Line-in (Stereo)
• Stereo Microphones
• Mono Microphones
Each of the power up modes are
configured to apply the appropriate
input impedance and input voltage
levels to best match the electrical
characteristics of the instrument
connected to the transmitter dongle.
Mixers
DJ Gear
Digital Recorders
Mixers
Stringed
Instruments
Digital Recorders
Brass
Instruments
Woodwinds
Instruments
Computers Stereo System
Transmitter
(Tx)
Receiver
(Rx)
Headphones &
In-ear Monitors
Stereo System
Wi-AudioStream
INTRODUCTION
Extreme Flexibility!
The Wi-AudioStream boasts an interchangeable
1/4” (6.35mm) TRS stereo connector jack, 1/8”
(3.5mm) stereo miniature jack, 2.5mm
subminiature jack and XLR connectors for
maximum connectivity with audio devices.
The Wi-AudioStream power source flexible
design boasts an internal rechargeable battery
for 6.5 hours of battery operations, powerful
USB bus power connectivity to any USB
equipped devices and optional ON-THE-GO
AA battery power booster adapter for 19 hours
USB
Bus Power
RCA
2.5mm Mono
2.5mm Stereo
3.5mm Mono
3.5mm Stereo
3.5mm Stereo
AA Battery
Power Booster
6.3mm TSR Mono
6.3mm TSR Stereo
of extended battery operations.
XLR Unbalanced
Charger
Wi-AudioStream
INTRODUCTION
Rx 3
Creating Your Audio Matrix!
Jangus Music’s built-in digital wireless audio signal
patch routing feature allows users to re-rout the audio
output signal from their instruments to up to 8 different
Rx digital wireless receivers including Jangus Music’s
JM-WHM01 digital wireless headphone audio
monitoring system for private listening and
performance monitoring with a simple press of the
Link button located on the transmitter dongle.
Headphone
Rx 2
Mixer
Rx 4
Tx 1
In-ear Monitor
Rx 1
Computer
Rx 5
No more removing the patch-bay devices,
disconnecting cables, and flipping I/O circuit boards!
Compressor/Limiter/
Gate/FX
Digital Recorder
Rx 6
Rx 8
Amplifier
Rx 7
Wi-AudioStream
PACKING LIST
What is included in the package?
w w w. j a n g u s m u s i c . c o m
Verify that you have received all of the items listed below.
Please visit our web site at www.jangusmsuic.com for additional accessories.
Wi-Transmitter
Wi-Receiver
(QTY 2) 1/4” Mono Male to
1/8” Stereo Male Cable
USB Y-Split Power Cable
Universal AC Charger
(QTY 2) 1/4” Stereo Male to
1/8” Stereo Male Y-split Cable
User Manual
Carrying Bag
Wi-AudioStream
ABOUT YOUR JM-WAL45
Wi Transmitter
1. Audio IN Jack
2. Power ON/OFF
3. Link / Paring
4. Power/Status LED
5. Volume UP
6. Volume Down
7. Mute
8. Sleep
9. MIC Mode
10. USB Charging Port
11. Belt Clip
Wi Receiver
1. Audio OUT Jack
2. Power ON/OFF
3. Link / Paring / VoIP
11
4. Power/Status LED
5. Volume UP
6. Volume Down
7. Mute/ Play/Pause
8. Previous Track
9. Next Track
10. (VoIP) Microphone
12
11
11. USB Charging Port
12. Belt Clip
Wi-AudioStream
TRANSMITTER CONTROLS
Transmitter Dongle Controls and Connections
j Audio IN Jack:
Provide stereo and mono connection for professional vocal and instruments
capacitive microphones and any analog devices such as monitoring systems
MP3 players, cell phones, stereo systems, computers and more...
k Power ON/OFF:
l Power/Status LED:
Press and hold the Power button for 2 seconds to turn ON or OFF the transmitter
The Power/Status LED display the status of six functions, ON/OFF, Battery		
Charging, Paring, Microphone Power, Mute and Sleeping mode statuses
F Please refer to the “Function Matrix Table” section of this manual for more details
m Volume UP:
Press and hold the Volume UP for auto increments of the volume level
Press the Volume UP once for step increments of the volume level
n Volume DOWN:
Press and hold the Volume DOWN for auto increments of the volume level
Press the Volume DOWN button once for step increments of the volume level
10
Wi-AudioStream
TRANSMITTER CONTROLS
o Mute: 		
Press and hold the Mute button for 3 seconds stop the audio transmission
F Please refer to the “ “Function Matrix Table” section of this manual for more details
p Link/Pair:
The Link button performs two functions Paring and Linking.
The Paring function allows the transmitter dongle to connect to up to 8 eight
different receivers to create you own wireless audio matrix. Press and hold the 		
Link button for 6 seconds until LED flash 				
F Please refer to the “Paring Procedures” section of this manual for detailed instructions
F Please refer to the “Audio Matrix Accessories” section of this manual for options listing
The Link function allows the transmitter dongle to reroute the audio signal
connect from the instrument to up to 8 eight different receivers previously 		
paired with the transmitter. Press the Link button once and the transmitter
will reroute the wireless connection to the next receiver.
F Please refer to the “ “Function Matrix Table” section of this manual for additional information
F Please refer to the “Audio Matrix Accessories” section of this manual for options listing
11
Wi-AudioStream
TRANSMITTER CONTROLS
Transmitter Dongle Controls and Connections
q Sleep: 		
The Sleep function button on the transmitter dongle is designed to prolong the		
battery life operations of the transmitter dongle by 50% as well as the receiver 		
dongle battery life 35% when not in use.
When the Sleep function on the transmitter is activated, the transmitter dongles 		
sends a signal to the linked receiver dongle to go into a standby mode while 		
switching to full sleep mode. The Sleep mode preserves the audio levels
settings on both dongles as well as on the communications link between the 		
transmit and the linked dongle.
Press and hold the Sleep button for 3 seconds to switch the transmitter and 		
the receiver dongles onto standby power save mode
Press and hold the Sleep button for 3 seconds to wake-up the transmitter and 		
the receiver dongles.		
F Please refer to the
12
“Function Matrix Table” section of this manual for more details
Wi-AudioStream
TRANSMITTER CONTROLS
r MIC Power Mode:
The MIC Mode multifunction button allows the user to choose between three 		
different power up modes to support Stereo Capacitive Microphones, Mono 		
Capacitive Microphones and Stereo Line -in to the transmitter dongle. To select 		
the desired operations mode, press the MIC button for 2 seconds and until the 		
blue LED change its flashing sequence then release, To cycle between the three 		
modes, simply press and hold the MIC button and the transmitter will cycle 		
between the three modes along with the Blue LED flashing sequence to each of 		
the modes. Release the mode button once the desired mode setting is reached
F Please refer to the “ “Function Matrix Table” section of this manual for detailed instructions .
s Charging Port:
The transmitter dongle utilizes mini USB connection to power up and charge the
internal batteries. The transmitter dongle can be charged using the supplied 		
universal AC charger, via the instrument built-in USB port or the optional AA
battery power booster USB adapter.
11 Belt Clip:
The transmitter dongle can be attached to guitar strap, belt, shirts and pants 		
pockets. The rigid small size light wight design is easy to ware without impeding 		
your movement.
13
Wi-AudioStream
RECEIVER CONTROLS
Receiver Dongle Controls and Connections
u Audio OUT Jack:
Provide a stereo connection for professional In-ear Monitors, Sound Systems		
Mixer Samplers, Computers Home Digital Theaters, Headphones and more...
v Power ON/OFF:
w Power/Status LED:
Press and hold the Power button for 2 seconds to turn ON or OFF the transmitter
The Power/Status LED display the status of five functions, ON/OFF, Battery, 		
Charging, Paring, Mute and Sleeping mode statuses
F Please refer to the “ “Function Matrix Table” section of this manual for more details
x Volume UP:
Press and hold the Volume UP for auto increments of the volume level
Press the Volume UP once for step increments of the volume level
y Volume DOWN:
Press and hold the Volume DOWN for auto increments of the volume level
Press the Volume DOWN button once for step increments of the volume level
14
Wi-AudioStream
RECEIVER CONTROLS
z Link/VoIP:
This multifunction button performs three functions, Paring, Linking and VoIP 		
MIC activation. The VoIP function is covered in the VoIP Microphone on page 15.
The Paring function allows the Receiver dongle to discovered by the Transmitter 		
Dongle. Press and hold the Link button for 6 seconds until LED flash 		
F Please refer to the “Paring Procedures” section of this manual for detailed instructions
The Link function allows the transmitter dongle to reroute the audio signal
connect from the instrument to up to 8 eight different receivers previously 		
paired with the transmitter. Press the Link button once and the transmitter
will reroute the wireless connection to the next receiver.
F Please refer to the
{ Next Track:
“Function Matrix Table” section of this manual for additional information
The Next Track function button is used with optional PC/MAC USB Transmitter 		
dongle to remotely control the media player and sequencing software to jump to 		
the next audio track on the play list.
Press the Next Track button once to jump to the next audio track
15
Wi-AudioStream
RECEIVER CONTROLS
Receiver Dongle Controls and Connections
| Previous Track:
The Previous Track function button is used with optional PC/MAC USB 		
Transmitter dongle to remotely control the media player and sequencing 		
software to jump to the next audio track on the play list
Press the Previous Track button once to jump to the previous audio track.
F Please refer to the
} Mute/Pause/Play:
Press and hold this function button for 3 seconds stop the audio transmission
“Function Matrix Table” section of this manual for more details
F Please refer to the
When the Receiver dongle is used with optional PC/MAC USB Transmitter dongle,
the Mute/Pause/Play function will remotely control the media player and 		
sequencing software to mute, pause or play to the audio track
Press the Mute/Pause/Play button once to pause or play audio track.
Press and hold the Mute/Pause/Play button for 3 seconds to mute/un-mute audio
F Please refer to the
16
“Function Matrix Table” section of this manual for more details
“Function Matrix Table” section of this manual for more details
Wi-AudioStream
RECEIVER CONTROLS
~ VoIP Microphone:
The Microphone on the Receiver dongle is used with optional PC/MAC USB
Transmitter dongle for Voice over Internet Protocol (VoIP) communications.
This powerful feature allow musicians to collaborate with each other over the 		
internet
F Please refer to the
11 Charging Port:
To activate the VoIP Microphone on the Receiver dongle, press the LINK / VoIP 		
button once. The Blue LED on the reviver will turn ON when the VoIP mIC is 		
activated. VoIP MIC is now ready for use on your PC or MAC with the optional 		
USB Transmitter dongle
12 Belt Clip:
“Function Matrix Table” section of this manual for more details
The receiver dongle utilizes mini USB connection to power up and charge the		
internal batteries. The transmitter dongle can be charged using the supplied 		
universal AC charger, via the instrument built-in USB port or the optional AA
battery power booster USB adapter.
The receiver dongle can be attached to, belts, shirts and pants pockets when used
with ear-worm MICs or in-ear professional personal monitors. The rigid small size
light wight design is easy to ware without impeding your movement.
17
Wi-AudioStream
GETTING STARTED
Ready, Charge, Go!
AC Charger
USB Connector
Before using your new Wi-AudioStream professional digital wireless dongles,
you need to fully charge the batteries on the dongles for approximately 2 hours.
Charging
1. Plug the AC Charger into a power socket
2. Connect the USB Y-Split power cable into the USB port on the AC charger
3. Connect one of the two mini USB connectors into the Transmitter USB port
4.
5.
6.
7.
18
Connect the second mini USB connector into the Receiver USB port
The Power/Status LED will turn to solid Red ON
When charging is complete the Red LED will turn OFF
Remove the charging cable and adapter and store into the carrying case
USB Port
LIN
WE
PO
USB Port
Mini USB
Connector
Wi-AudioStream
PARING
Paring the Wi-AudioStream
Before using the Wi-AudioStream dongles with your instruments, you need to pair the transmitter dongle with
the receiver dongle. Pairing will create connection between the transmitter dongle and receiver dongle.
1. First turn ON the transmitter (Tx) and the receiver (Rx) dongles by pressing and
holding the POWER button
on each of the dongles for 2 seconds.
kv
(Rx)
2. Press and hold the LINK button
on the transmitter (Tx) dongle for 6 seconds.
The Power/Status LED on the Transmitter will start flashing. The transmitter
dongle is now in a Pairing mode and ready to search for receivers.
3. Press and hold the LINK button
on the receiver (Rx) dongle for 6 seconds.
The Power/Status LED on the receiver will start flashing. The receiver dongle
is now in a Pairing mode and ready to be found by the transmitter dongle
4. Once the transmitter dongle pair with receiver dingle, the Power/Status LED
on both devices will turn to solid Green
(Tx)
5. The Wi-AudioStream transmitter and receiver dongles are now ready for use.
19
Wi-AudioStream
TRANSMITTER CONNECTION
Audio Input Jack
Connecting Capacitive Microphones to Transmitter!
The Wi-AudioStream transmitter support Mono and Stereo capacitive
microphones connection.
1. First Locate you Ear-worn Microphones or your Mono/Stereo capacitive
microphones you wish to connect to the Wi-AudioStream transmitter.
2. Connect the 1/8” stereo male end of the MIC cable into
the “Audio Input” jack on the transmitter dongle.
Stereo Microphones
Audio Cable
3. Rout the audio cable beneath the belt clip as shown to
prevent accidental disconnection of cable.
4. Place your Ear-worn MIC on your ear or attache the Mono/Stereo
microphones to your shirt, guitar electric acoustic guitar, stringed,
woodwinds, brass and other acoustic instruments.
20
Belt Clip
Wi-AudioStream
TRANSMITTER CONNECTION
5. Verify if you are connecting a Mono or Stereo microphone to the transmitter.
5.1 For Stereo Microphones Connection
k for 2 seconds.
r for 2 seconds until the Blue starts to flash
a. Power up the transmitter by pressing and holing the POWER button
b. Press and hold the MIC button
with slow flashes
F The Power Status LED will show Slow Flashing Blue and Solid Green LEDs
5.2 For Stereo Microphones Connection
k for 2 seconds.
r for 2 seconds until the Blue starts to flash
a. Power up the transmitter by pressing and holing the POWER button
b. Press and hold the MIC button
with fast flashes
F The Power Status LED will show Fast Flashing Blue and Solid Green LEDs
(Tx)
6. Attache the Wi-AudioStream to you belt or pocket.
F Please proceed to page 27 for the receiver connection
21
Wi-AudioStream
TRANSMITTER CONNECTION
Connecting Musical Instruments & Gear to Transmitter!
Audio Input Jack
The Wi-AudioStream transmitter support professional digital instruments connections
such as Mixers, JD gear, MP3 player, Stereo systems Computers Media players,
Smart Phones, Flat Screen Displays and any device with headphone jack.
1. For (Mono) connection locate the 1/4” mono to 1/8” stereo cable
For (Stereo) connection locate the 1/4” stereo Y-split to 1/8” stereo cable
2. Connect the 1/8” stereo end of the cable into the “Audio Input” jack
on the transmitter dongle.
Audio Cable
1/4” Mono to 1/8’ Stereo Cable
3. Rout the audio cable beneath the belt clip as shown to prevent accidental
disconnection of cable.
Belt Clip
22
Wi-AudioStream
TRANSMITTER CONNECTION
4. For (Mono) connection, connect the 1/4” mono male end of the cable to the
left mono output (L/MONO) located on the back panel of the digital instrument.
Digital Instrument
For (Stereo) connection, connect the two 1/4” male ends of the cable to the
left (L/MONO) and right (R) outputs located on the back panel of the
digital instrument.
for 2 seconds until the Green LED and Blue turn ON
F The Power Status LED will show Two Fast Blue LED
Solid Blue and Solid Green LEDs
(L/MONO)
(R)
5. Power up the transmitter by pressing and holing the POWER button
1/4” Stereo Y-Split to 1/8’
Stereo Cable
flashes every 1 second and
(Tx)
6. Attache the Wi-AudioStream to you belt or pocket
F Please proceed to page 24 for the receiver connection
23
Wi-AudioStream
RECEIVER CONNECTION
Connecting Analog and Digital Devices to Receiver!
The Wi-AudioStream receiver support professional digital instruments connection such as Mixers, Amplifiers,
Speaker, Samplers, Hard Disk Recorders, Computers, Headphones, In-Ear professional personal monitors,
Stereo Systems and more...
Please note connections must be made with the power turned off. Please be aware that
careless operation may damage your speaker system or cause malfunctions.
If you’ve connected a stereo audio amp, be aware that playing at high volume may
damage your speaker system. Be careful not to raise the volume excessively.
Mixers, Amplifiers, Hard Disk Recorders and Effects Pedals Connection
1. For (Mono) connection locate the 1/4” mono to 1/8” stereo cable
For (Stereo) connection locate the 1/4” stereo Y-split to 1/8” stereo cable
24
Wi-AudioStream
RECEIVER CONNECTION
Audio Output Jack
2. Connect the 1/8” stereo end of the cable into the “Audio Input” jack
on the transmitter dongle.
3. Rout the audio cable beneath the belt clip as shown to prevent
accidental disconnection of cable
4. Connect the 1/4” male end of the cable to the inputs of your
amplifier, powered monitor or mixer. If you’re using the Wi-AudioStream
receiver in stereo, use both the L/ MONO and R jacks on your samples or
use two channels on your mixer
Input
or hard disk recorder.
1/4” Stereo Y-Split to 1/8’
Stereo Cable
Audio Cable
Amp or Power Monitors
LINK
Input
POWER
Amp or Power Monitors
Belt Clip
25
Wi-AudioStream
RECEIVER CONNECTION
(Rx)
5. Turn ON the receiver (Rx) dongles by pressing and holding the
POWER button
on the receiver dongle for 2 seconds.
F The Power Status LED on the receiver (Rx) will show Solid Green LEDs
F The flashing Green LED on the transmitter (Tx) will turn to Solid Green indicating
communications between (Tx) and (Rx) is established.
6. Place the receiver (Rx) dongle on the amp as shown. Alternatively the
receiver can be placed next to the Mixer, Digital Recorder or Sound System.
7. Power up your Amp, Mixer, Digital Recorder and are you are ready to go!
POWER
LINK
26
Wi-AudioStream
RECEIVER CONNECTION
Connecting Headphones and In-Ear Professional Personal Monitors!
Audio Output Jack
PLEASE PROTECT YOUR EARS! Prolonged use of headphones or
In-Ear personal monitors at high volumes may affect your hearing
capacity or may result in noise induced hearing loss (NHL).
1. Connect the 1/8” stereo connector end of your headphone or In-Ear
personal monitor into the “Audio Output” jack on the receiver dongle.
In-ear Personal Monitors
1. Rout the audio cable beneath the belt clip as shown to prevent
accidental disconnection of cable
Audio Cable
1. Turn ON the receiver (Rx) dongles by pressing and holding the
POWER button
on the receiver dongle for 2 seconds.
F The Power Status LED on the receiver (Rx) will show Solid Green LEDs
F The flashing Green LED on the transmitter (Tx) will turn to Solid
Green indicating communications between (Tx) and (Rx) is established.
Belt Clip
(Rx)
27
Wi-AudioStream
Tx FUNCTION MATRIX
Transmitter (Tx) Button Function Matrix!
Function		
Button
Activation			
Hold Time
LED Status
3 sec
k POWER Press and Hold		
Pairing Mode		
Press and Hold		
2 sec
p LINK
Signal Re-routing
Click 			
Click
p LINK
Volume UP/Down		
Click
for
Step,
Press
and
hold
for
Auto
Click
mn
Mute ON/OFF		
Press and Hold		
2 sec
Sleep / Wake up		
Press and Hold		
3 sec
Line in Mode (Stereo)		
Press and Hold MIC Button
2 sec
(Factory setting)						
Solid Green
MIC Mode 1 (Stereo)		
Press and Hold MIC Button		
2 sec
MIC Mode 2 (Mono)		
Press and Hold MIC Button		
2 sec
Solid Green LED and
Slow Blue LED Flashes
Solid Green LED and
Fast Blue LED Flashes
Power ON/OFF
28
Fast Green Flashes
Solid Green Blue Flash
2 Green Flashes
Solid Green LED and
Two Blue LED Flashes
Wi-AudioStream
Tx LED INDICATOR CHART
Transmitter (Tx) LED Indicator Chart!
Function		
Searching For Receiver		
Linked to Receiver		
Low Battery			
Charging With Power OFF		
Charging With Power ON		
Charging Complete		
LED Status
Flashing Green
Solid Green
Solid Green & Flashing Red
Solid Red
Solid Red & Green
Red OFF
29
Wi-AudioStream
Rx FUNCTION MATRIX
Receiver (Rx) Button Function Matrix!
Function		
Button
v POWER
Pairing Mode		
z LINK/VoIP
Voice Over IP MIC z LINK/VoIP
Volume UP/Down		
xy
Mute ON/OFF		
Play/Pause			
Next Track			
Prev Track			
Power ON/OFF
30
Activation			
Hold Time
LED Status
Press and Hold		
3 sec
Solid Green
Press and Hold		
3 sec
Fast Green Flashes
Click (With Optional USB Tx Dongle)
Click
Solid Green & Blue
Click for Step, Press and Hold for Auto Click
Press and Hold		
3 sec
Click (With Optional USB Tx Dongle)
Click
Click (With Optional USB Tx Dongle)
Click
Click (With Optional USB Tx Dongle)
Click
Solid Green & Blue
Wi-AudioStream
Rx LED INDICATOR CHART
Receiver (Rx) LED Indicator Chart!
Function			
Searching For Receiver		
Linked to Receiver		
Sleep			
Low Battery			
Charging With Power OFF		
Charging With Power ON		
Charging Complete		
LED Status
Flashing Green
Solid Green
2 Green Flashes (Activated By Tx)
Solid Green & Flashing Red
Solid Red
Solid Red & Green
Red OFF
31
Wi-AudioStream
PRODUCT SPECIFICATIONS
Product Technical Specifications!
Specifications		
Frequency:			
Frequency Response:		
Communications Frequency Selection:
S/N Ratio:			
Audio Input / Output:		
Max Input Level:		
Max Output Level:		
Input Impedance:		
Output Impedance:		
Battery Life:			
Battery Type:			
32
2.4 GHz, 16bit, 48KHz Digital Wireless Communications
10Hz to 20Khz
Auto Select
More than 90 dB (A-weighted) for stereo line-in mode
More than 82 dB (A-weighted) for stereo and mono MIC mode
3.5mm Stereo Jack
2Vrms
700mVrms		
3.3K ohm
< 10 ohm
6.5 hours
Internal Rechargeable Batteries
Wi-AudioStream
PRODUCT SPECIFICATIONS
Specifications		
Battery Power Boost:		
19.5 hours (With optional AA battery power booster adapter)
USB Bus Power		
Low Battery Alert:		
Yes
15 Minutes of Life Left
Power-up Modes		
Antenna:			
Range:			
Units operating at the same time:
Signal Patch Audio Matrix:		
MAC/PC Compatible:		
VoIP Capable:		
802.11g/n Network Safe:		
Transmitter Weight		
Receiver Weight		
Dimensions			
Three (3) Power-up Modes
(Line-in Stereo, MIC Stereo, MIC Mono)
Internal Antennas
150 to 300 Feet (May not be dependent on line of sight)
12
One (1) transmitter can re-rout audio signal to eight (8) different receivers
Yes (With Optional USB Transmitter Dongle)
Yes (With Optional USB Transmitter Dongle)
Yes
0.068 lbs
0.056 lbs
1.2” W x 0.6” D x 3.34” H
33
Wi-AudioStream
PRODUCT ACCESSORIES
Audio Matrix Accessories for Extreme Flexibility!
Accessory 		
Specifications		
Wi-StudioM:		
Digital wireless studio monitors headphones
Wi-USB Tx:		
Digital wireless USB transmitter for MAC/PC audio and VoIP applications
Wi-iPod Tx:		
Digital wireless transmitter for Apple iPod
Wi-AudioLink Tx:
Digital wireless transmitter for Digital Pianos, Keyboards, Electric Guitars,
Electric Acoustic Instruments, Digital Wind Instruments, Effects Pedals, Electronic
Drums, Mixers, Amplifiers, Speakers, Sound Systems, Samplers, Hard Disk Recorders,
DJ Gear, Computers, Consumer Electronics products and more.
Wi-AudioStream Tx:
Digital wireless transmitter for Mono and Stereo microphones and personal
monitoring systems including Ear-Worn Microphones, Clip-on Microphones, Acoustic,
Brass and Woodwind Instruments Microphones, MP3 players and more.
Wi-AudioLink Rx:
Digital wireless transmitter for In-ear Personal Monitors, Studio Headphone Monitors,
Effects Pedals, Mixers, Amplifiers, Speakers, Sound Systems, Samplers, Hard Disk
Recorders, DJ Gear, Computers, Consumer Electronics products and more.
34
Wi-AudioStream
ACEESSORIES
Cable & Power Accessories for Extreme Flexibility!
Accessory 		
Specifications		
Wi-BodyFree Guitar Strap:
Guitar strap with built-in “Wi-PowerBooster” AA battery power booster adapter,		
“Wi-AudioLink” Rx receiver socket and cable routing management system for
the ultimate in BodyFree wireless performance experience.
Wi-PowerBooster:
AA battery power booster USB adapter with white LED light for charging and extending
the internal rechargeable batteries life on the Wi-Audiolink and Wi-AudioStream
transmitters and receivers up to 19 hours.
Wi-PowerAdapter:
Universal USB power adapter for charging the Wi-Audiolink and Wi-AudioStream
transmitters.
Please visit our web site at www.jangusmusic.com
for the optional cable connection accessories
35
Wi-AudioStream
GREEN ENVIRONMENT
Disposal and Recycling Information!
Correct Disposal		
This symbol indicates that your product must be disposed
of properly according to the local laws and regulations.
When your product reaches its end of life, contact the retailer
where the product was purchased or your local authorities to
learn about recycling options.
This product should not be mixed with other commercial
wastes for disposal.
36
Wi-AudioStream
FCC NOTICES
Regulatory Compliance Information
Compliance Statement		
This device complies with part 15 of the FCC rules. Operations is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operations.
Disclaimers		
This manual is published by Jangus Music, Inc. The information contained in this document is subject to change
without notice. © 2009 Jangus Music, Inc. All rights reserved. Wi, Wi-AudioStream, Wi, Digital Wireless Stereo
logos and Jangus Music logos are registered trademarks of Jangus Music, Inc. in the United States and may be
registered trademark or trademarks in other countries. All other trademarks included herein are the property of their
perspective owners.
37
w w w.jangusmusic.com
© 2009 Jangus Music, Inc. All rights reserved. Wi, Wi-AudioStream, Digital Wireless Stereo logo and Jangus Music logo are
registered trademarks of Jangus Music, Inc. in the United States and may be registered trademark or trademarks in other
countries. All other trademarks included herein are the property of their perspective owners.
(Design and specifications subject to change without notice).
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/ TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could
void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-702
Modify Date                     : 2009:07:20 16:09:34-04:00
Create Date                     : 2009:07:17 16:46:44+08:00
Metadata Date                   : 2009:07:20 16:09:34-04:00
Creator Tool                    : Adobe InDesign CS3 (5.0.4)
Format                          : application/pdf
Document ID                     : uuid:7e6729be-5070-4e82-8374-178b0130898c
Instance ID                     : uuid:31e2141e-e90b-4722-b8d9-dc3331608f85
Producer                        : Adobe PDF Library 8.0
Has XFA                         : No
Page Count                      : 39
Creator                         : Adobe InDesign CS3 (5.0.4)

EXIF Metadata provided by EXIF.tools