Tatung KEN4-T STEREO DIGITAL WIRELESS AUDIO DONGLES (TRANSMITTER) User Manual USERS MANUAL 1

Download:
Mirror Download [FCC.gov]
Document ID	1141980
Application ID	KlTciI+J8T0ByALdwsu1bA==
Document Description	USERS MANUAL 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	310.11kB (3876382 bits)
Date Submitted	2009-07-21 00:00:00
Date Available	2009-07-22 00:00:00
Creation Date	2009-07-21 09:35:38
Producing Software	Adobe PDF Library 8.0
Document Lastmod	2009-07-21 10:01:02
Document Title	USERS MANUAL 1
Document Creator	Adobe InDesign CS3 (5.0.4)

J M-WA L 35
USER G U I D E
Wi AudioLink
Professional Stereo Digital Wireless Audio Dongles
DIGITAL WIRELES
S T E R E O
Wi-AudioLink
CONGRATULATIONS
CONGRATULATIONS!
Thank You For Choosing Jangus Music!
Congratulations on your purchase of the Wi-AudioLink Professional Stereo Digital Wireless Audio Dongles.
In this manual, you’ll find information designed to help you understand the capability of your
Wi-AudioLink as well as step-by-step explanation on how to install and operate your
Wi-AudioLink professional stereo digital wireless audio dongles.
Wi-AudioLink
TECHNICAL SUPPORT
Getting Answers!
We want you to get the most from your new Wi-AudioLink professional stereo digital wireless audio dongles!
Simply logon to www.jangusmusic.com and access the powerful resources available online including
instructional manuals and frequently asked questions.
Our customer service support staff are ready to assist you with any question you may have.
Your Wi-AudioLink comes with 90 days of telephone support and one year of service coverage.
There are may ways to contact Jangus Music customer service support.
E-Mail:		
Website:		
Technical support:
support@jangusmusic.com
https://www.jangusmusic.com/support
(949) 526-4877 [949-JANGUS7]
Wi-AudioLink
INTRODUCTION
Making Grate Instruments Better!
Jangus Music’s Wi-AudioLink JM-WAL35 professional stereo digital wireless audio dongles solution is the
smallest, most advanced cable replacement technology available today that fits on the palm of your hand!
This full function 2.4GHz point-to-point digital wireless audio solution provides up to 300 feet of secure,
simultaneous un-compressed stereo 48KHz/16bit CD quality wireless audio connectivity without radio
frequency (RF) interference with other wireless devices ,signal loss, crackle or AC hum making it the best
wireless solution for live performances and studio recording environments.
This Patents-Pending, plug-and-play digital wireless audio solution replaces the traditional audio wire cable
and provide easy and user friendly way to connect any professional musical instrument such as Digital
Pianos, Keyboards, Guitars, Effects Pedals, Electronic Drums and other analog audio devices to remote and
hard to reach equipment such as Mixers, Amplifiers, Speakers, Samplers, Hard Disk Recorders, Computers
and more. Simply connect the dongle size transmitter to the audio output jacks on the musical instrument
then connect the dongle size receiver to the mixer, amplifier, speaker, surround sound or computer audio
input jacks and you are done!...
Wi-AudioLink
INTRODUCTION
Meeting The Specs!
The Wi-AudioLink transmitter small and
rugged design, boasts three (3) different
power up modes to support the following
instruments connections:
• Line-in (Stereo)
• Active Guitars/Mono Line-in
• Passive Guitars /Electric Acoustic
Each of the power up modes are
configured to apply the appropriate
input impedance and input voltage
levels to best match the electrical
characteristics of the instrument
connected to the transmitter dongle.
Effects Pedals
Effects
Pedals
Electric
Guitars
Amplifiers
MP3
Smart Phone
Flat Screen TV
Stereo System
Consumer
Mixers
DJ Gear
Digital
Recorders
Computers
Electric
Acoustics
Mixers
Electronic
Wind instruments
Digital Recorders
Pianos &
Keyboards
Electronic
Drums
Professional Gear
Transmitter
(Tx)
Receiver
(Rx)
In-ear Headphone Monitors
Computers
Stereo System
Wi-AudioLink
INTRODUCTION
Extreme Flexibility!
The Wi-AudioLink boasts an interchangeable
1/4” (6.35mm) TRS stereo connector jack, 1/8”
(3.5mm) stereo miniature jack, 2.5mm
subminiature jack and XLR connectors for
maximum connectivity with audio devices.
The Wi-AudioLink power source flexible
design boasts an internal rechargeable battery
for 6.5 hours of battery operations, powerful
USB bus power connectivity to any USB
equipped devices and optional ON-THE-GO
AA battery power booster adapter for 19 hours
USB
Bus Power
RCA
2.5mm Mono
2.5mm Stereo
3.5mm Mono
3.5mm Stereo
3.5mm Stereo
AA Battery
Power Booster
6.3mm TSR Mono
6.3mm TSR Stereo
of extended battery operations.
XLR Unbalanced
Charger
Wi-AudioLink
INTRODUCTION
Creating Your Audio Matrix!
Jangus Music’s built-in digital wireless audio signal
patch routing feature allows users to re-rout the audio
output signal from their instruments to up to eight (8)
different digital wireless receivers including Jangus
Music’s JM-WHM01 digital wireless headphone audio
monitoring system for private listening and
performance monitoring with a simple press of the
Link button located on the transmitter dongle.
Rx 3
Headphone
Rx 2
Mixer
Rx 4
Tx 1
Effects Pedals
Rx 1
Computer
Rx 5
No more removing the patch-bay devices,
disconnecting cables, and flipping I/O circuit boards!
Foot Pedals
Rx 8
Digital Recorder
Rx 6
Rx 7
Wi-AudioLink
PACKING LIST
What is included in the package?
w w w. j a n g u s m u s i c . c o m
Verify that you have received all of the items listed below.
Please visit our web site at www.jangusmsuic.com for additional accessories.
Wi-Transmitter
Wi-Receiver
(QTY 2) 1/4” Mono Male to
1/8” Stereo Male Cable
USB Y-Split Power Cable
Universal AC Charger
(QTY 2) 1/4” Stereo Male to
1/8” Stereo Male Y-split Cable
User Manual
Carrying Bag
Wi-AudioLink
ABOUT YOUR JM-WAL35
Wi Transmitter
1. Audio IN Jack
2. Power ON/OFF
3. Link / Paring
4. Power/Status LED
5. Volume UP
6. Volume Down
7. Mute
8. Sleep
9. Mic Power Mode
10. USB Charging Port
11. Belt Clip
Wi Receiver
1. Audio OUT Jack
2. Power ON/OFF
3. Link / Paring
11
4. Power/Status LED
5. Volume UP
6. Volume Down
7. Mute/ Play/Pause
8. Previous Track
9. Next Track
10. USB Charging Port
11
11. Belt Clip
Wi-AudioLink
TRANSMITTER CONTROLS
Transmitter Dongle Controls and Connections
j Audio IN Jack:
Provide a stereo connection for professional musical instruments, mixers 		
samplers and any analog devices such as MP3 players, cell phones, stereo 		
systems, computers, home entertainment systems and more...
k Power ON/OFF:
l Power/Status LED:
Press and hold the Power button for 2 seconds to turn ON or OFF the transmitter
The Power/Status LED display the status of six functions, ON/OFF, Battery		
Charging, Paring, Microphone Power, Mute and Sleeping mode statuses
FPlease refer to the “Tx Button Function Matrix” section of this manual for more details
m Volume UP:
Press and hold the Volume UP for auto increments of the volume level
Press the Volume UP once for step increments of the volume level
n Volume DOWN:
Press and hold the Volume DOWN for auto increments of the volume level
Press the Volume DOWN button once for step increments of the volume level
10
Wi-AudioLink
TRANSMITTER CONTROLS
o Mute: 		
Press and hold the Mute button for 3 seconds stop the audio transmission
FPlease refer to the “Tx Button Function Matrix” section of this manual for more details
p Link/Pair:
The Link button performs two functions Paring and Linking.
The Paring function allows the transmitter dongle to connect to up to 8 eight
different receivers to create you own wireless audio matrix. Press and hold the 		
Link button for 6 seconds until LED flash 				
F Please refer to the “Paring Procedures” section of this manual for detailed instructions
F Please refer to the “Audio Matrix Accessories” section of this manual for options listing
The Link function allows the transmitter dongle to reroute the audio signal
connect from the instrument to up to 8 eight different receivers previously 		
paired with the transmitter. Press the Link button once and the transmitter
will reroute the wireless connection to the next receiver.
F Please refer to the “ “Function Matrix Table” section of this manual for additional information
F Please refer to the “Audio Matrix Accessories” section of this manual for options listing
11
Wi-AudioLink
TRANSMITTER CONTROLS
Transmitter Dongle Controls and Connections
q Sleep: 		
The Sleep function button on the transmitter dongle is designed to prolong the		
battery life operations of the transmitter dongle by 50% as well as the receiver 		
dongle battery life 35% when not in use.
When the Sleep function on the transmitter is activated, the transmitter dongles 		
sends a signal to the linked receiver dongle to go into a standby mode while 		
switching to full sleep mode. The Sleep mode preserves the audio levels
settings on both dongles as well as on the communications link between the 		
transmit and the linked dongle.
Press and hold the Sleep button for 3 seconds to switch the transmitter and 		
the receiver dongles onto standby power save mode
Press and hold the Sleep button for 3 seconds to wake-up the transmitter and 		
the receiver dongles.		
F Please refer to the “Tx Button Function Matrix”
12
section of this manual for more details
Wi-AudioLink
TRANSMITTER CONTROLS
r Mode:		
The Mode multifunction button allows the user to choose between three different 		
power up modes to support Passive Guitars, Active Guitars or Stereo Line in
connection to the transmitter dongle. To select the desired operations mode, press
the Mode button for 2 seconds and until the blue LED change its flashing 		
sequence then release, To cycle between the three modes, simply press and 		
hold the Mode button and the transmitter will cycle between the three modes 		
along with the Blue LED flashing sequence to each of the modes. Release the 		
mode button once the desired mode setting is reached
F Please refer to the “Tx Button Function Matrix” section of this manual for detailed instructions .
s Charging Port:
The transmitter dongle utilizes mini USB connection to power up and charge the
internal batteries. The transmitter dongle can be charged using the supplied 		
universal AC charger, via the instrument built-in USB port or the optional AA
battery power booster USB adapter.
11 Belt Clip:
The transmitter dongle can be attached to guitar strap, belt, shirts and pants 		
pockets. The rigid small size light wight design is easy to ware without impeding 		
your movement.
13
Wi-AudioLink
RECEIVER CONTROLS
Receiver Dongle Controls and Connections
u Audio OUT Jack:
Provide a stereo connection for professional Sound Systems, Monitors, Mixers,		
Samplers, Computers Home Digital Theaters, Headphones and more...
v Power ON/OFF:
w Power/Status LED:
Press and hold the Power button for 2 seconds to turn ON or OFF the transmitter
The Power/Status LED display the status of five functions, ON/OFF, Battery, 		
Charging, Paring, Mute and Sleeping mode statuses
FPlease refer to the “Rx LED” Indicator Chart” section of this manual for more details
x Volume UP:
Press and hold the Volume UP for auto increments of the volume level
Press the Volume UP once for step increments of the volume level
y Volume DOWN:
Press and hold the Volume DOWN for auto increments of the volume level
Press the Volume DOWN button once for step increments of the volume level
14
Wi-AudioLink
RECEIVER CONTROLS
z Link/VoIP:
The Link multifunction button performs three functions, Paring, Linking and VoIP 		
Mic activation. The VoIP function is covered in the VoIP Microphone on page 15.
The Paring function allows the Receiver dongle to discovered by the Transmitter 		
Dongle. Press and hold the Link button for 6 seconds until LED flash 		
FPlease refer to the “Rx Button Function Matrix” section of this manual for detailed instructions
The Link function allows the transmitter dongle to reroute the audio signal
connect from the instrument to up to 8 eight different receivers previously 		
paired with the transmitter. Press the Link button once and the transmitter
will reroute the wireless connection to the next receiver.
FPlease refer to the “Rx Button Function Matrix”
section of this manual for additional information
{ Next Track:
The Next Track function button is used with optional PC/MAC USB Transmitter 		
dongle to remotely control the media player and sequencing software to jump to 		
the next audio track on the play list.
Press the Next Track button once to jump to the next audio track
FPlease refer to the “Audio Matrix” section of this manual for more details
15
Wi-AudioLink
RECEIVER CONTROLS
Receiver Dongle Controls and Connections
| Previous Track:
The Previous Track function button is used with optional PC/MAC USB 		
Transmitter dongle to remotely control the media player and sequencing 		
software to jump to the next audio track on the play list
Press the Previous Track button once to jump to the previous audio track.
FPlease refer to the “Rx Button Function Matrix” section of this manual for more details
} Mute/Pause/Play:
Press and hold this function button for 3 seconds stop the audio transmission
FPlease refer to the “Rx Button Function Matrix”
When the Receiver dongle is used with optional PC/MAC USB Transmitter dongle,
the Mute/Pause/Play function will remotely control the media player and 		
sequencing software to mute, pause or play to the audio track
Press the Mute/Pause/Play button once to pause or play audio track.
Press and hold the Mute/Pause/Play button for 3 seconds to mute/un-mute audio
FPlease refer to the “Rx Button Function Matrix”
16
section of this manual for more details
section of this manual for more details
Wi-AudioLink
RECEIVER CONTROLS
~ Charging Port:
The receiver dongle utilizes mini USB connection to power up and charge the		
internal batteries. The transmitter dongle can be charged using the supplied 		
universal AC charger, via the instrument built-in USB port or the optional AA
battery power booster USB adapter.
11 Belt Clip:
The receiver dongle can be attached to, belts, shirts and pants pockets when used
with in-ear professional personal monitors. The rigid small size light wight design 		
is easy to ware without impeding your movement.
17
Wi-AudioLink
GETTING STARTED
Ready, Charge, Go!
AC Charger
USB Connector
Before using your new Wi-AudioLink professional digital wireless dongles,
you need to fully charge the batteries on the dongles for approximately 2 hours.
Charging
1.
2.
3.
4.
5.
6.
7.
18
Plug the AC Charger into a power socket
Connect the USB Y-Split power cable into the USB port on the AC charger
Connect one of the two mini USB connectors into the Transmitter USB port
Connect the second mini USB connector into the Receiver USB port
The Power/Status LED will turn to solid Red ON
When charging is complete the Red LED will turn OFF
Remove the charging cable and adapter and store into the carrying case
USB Port
LIN
WE
PO
USB Port
Mini USB
Connector
Wi-AudioLink
PARING
Paring the Wi-AudioLink
Before using the Wi-AudioLink dongles with your instruments, you need to pair the transmitter dongle with the
receiver dongle. Pairing will create connection between the transmitter dongle and receiver dongle.
1. First turn ON the transmitter (Tx) and the receiver (Rx) dongles by pressing and
holding the POWER button
on each of the dongles for 2 seconds.
kv
(Rx)
2. Press and hold the LINK button
on the transmitter (Tx) dongle for 6 seconds.
The Power/Status LED on the Transmitter will start flashing. The transmitter
dongle is now in a Pairing mode and ready to search for receivers.
3. Press and hold the LINK button
on the receiver (Rx) dongle for 6 seconds.
The Power/Status LED on the receiver will start flashing. The receiver dongle
is now in a Pairing mode and ready to be found by the transmitter dongle
4. Once the transmitter dongle pair with receiver dingle, the Power/Status LED
on both devices will turn to solid Green
(Tx)
5. The Wi-AudioLink transmitter and receiver dongles are now ready for use.
19
Wi-AudioLink
TRANSMITTER CONNECTION
Connecting Electric Guitars & Electric Acoustics Instruments!
The Wi-AudioLink transmitter support passive and active
guitars including Lead, Bass and Acoustic electric guitars.
Audio Cable
Audio Input
Jack
1. First Locate the 1/4” mono male to 1/8” stereo
male cable supplied with kit.
2. Connect the 1/8” stereo male end of the cable into
the “Audio Input” jack on the transmitter dongle.
3. Rout the audio cable beneath the belt clip as shown to
prevent accidental disconnection of cable.
4. Connect the 1/4” mono male end of the cable to the electric
guitar input located towards the right end of the electric guitar
if you’re a right handed player and the left end if you’re
left handed.
20
1/4” Mono to 1/8’ Stereo Cable
Electric Guitar input
1/4” mono male connector
Belt Clip
Wi-AudioLink
TRANSMITTER CONNECTION
5. Verify if you are connecting a passive or active electric guitar to the transmitter. If the electric guitar use a
battery to operate, then the guitar is an active type. If not then the guitar is a passive type.
5.1 For Passive Guitars Connection
a. Power up the transmitter by pressing and holing the POWER button
k for 2 seconds.
F The Power Status LED will show Slow Flashing Blue and Solid Green LEDs
F The standard factory power up setting is set for Passive Guitars . The transmitter can remember
and power up in the last power up mode selected .To change the startup mode to the desired
mode please refer to the “Tx Function Matrix” of this manual for detailed instructions,
5.1 For Active Guitar & Electric Acoustic Instruments Connection
a. Power up the transmitter by pressing and holing the POWER button
b. Press and hold the Mode button
k for 2 seconds.
r for 2 seconds. The Blue LED will display fast flashes
F The Power Status LED will show Slow Flashing Blue and Solid Green LEDs
6. Attache the Wi-AudioLink to the optional Wi-Guitar Strap or to your belt.
(Tx)
F Please proceed to page 28 for the receiver connection
21
Wi-AudioLink
TRANSMITTER CONNECTION
Connecting Professional Musical Instruments & Gear!
Audio Input Jack
The Wi-AudioLink transmitter support professional digital instruments
connection such as Digital Pianos, Keyboards, Electronic Drums, Electronic
Wind Instruments, Hard Disk Recorders, Samplers, Effects Pedals, Mixers,
JD gear, and more...
1. For (Mono) connection locate the 1/4” mono to 1/8” stereo cable
For (Stereo) connection locate the 1/4” stereo Y-split to 1/8” stereo cable
Audio Cable
1/4” Mono to 1/8’ Stereo Cable
2. Connect the 1/8” stereo end of the cable into the “Audio Input” jack
on the transmitter dongle.
3. Rout the audio cable beneath the belt clip as shown to prevent accidental
disconnection of cable.
22
Belt Clip
Wi-AudioLink
TRANSMITTER CONNECTION
4. For (Mono) connection, connect the 1/4” mono male end of the cable to the
left mono output (L/MONO) located on the back panel of the digital instrument.
Digital Instrument
For (Stereo) connection, connect the two 1/4” male ends of the cable to the
left (L/MONO) and right (R) outputs located on the back panel of the
digital instrument.
7. Press and hold the Mode button
(L/MONO)
(R)
6. Power up the transmitter by pressing and holing the POWER button
for 2 seconds.
r until the Blue LED display
two fast flashes for stereo Line-in mode operations.
F Please refer to the “Tx Button Function Matrix” section of this manual for detailed instructions
6. Place the transmitter (Tx) dongle on top of your musical instrument. Alternatively
the receiver can be placed on the next to the musical instrument.
1/4” Stereo Y-Split to 1/8’
Stereo Cable
(Tx)
F Please proceed to page 28 for the receiver connection
23
Wi-AudioLink
TRANSMITTER CONNECTION
Connecting Two Keyboards/Digital Pianos!
Audio Input Jack
The Wi-AudioLink transmitter can support up to two (2) keyboards / digital
pianos in mono mode or stereo mode connection.
Please visit our web site at www.jangusmusic.com
for the optional two keyboards stereo cable connection
accessories
1. First Locate the 1/4” stereo Y-split to 1/8” stereo cable supplied with kit.
1/4” Stereo Y-Split to 1/8’
Stereo Cable
Audio Cable
2. Connect the 1/8” stereo end of the cable into
the “Audio Input” jack on the transmitter dongle.
3. Rout the audio cable beneath the belt clip as shown to
prevent accidental disconnection of cable.
24
Belt Clip
Wi-AudioLink
TRANSMITTER CONNECTION
Keyboard #1
4. Connect the red 1/4” end of the cable to the left mono input
located on the back panel of the first keyboard/digital piano.
5. Connect the black 1/4” end of the cable to the left mono input
located on the back panel of the second keyboard/digital piano.
1/4” Stereo Y-Split to 1/8’
Stereo Cable
(L/MONO)
6. Power up the transmitter by pressing and holing the POWER button
for 2 seconds.
(L/MONO)
7. Press and hold the Mode button
r until the Blue LED display
two fast flashes for stereo Line-in mode operations.
F Please refer to the “Tx Button Function Matrix” section of this
manual for detailed instructions .
8. Place the transmitter (Tx) dongle on top of your musical instrument.
Alternatively the receiver can be placed on the next to the musical instrument.
F Please proceed to page 28 for the receiver connection
Keyboard #2
(Tx)
25
Wi-AudioLink
TRANSMITTER CONNECTION
Connecting Computers, Stereo Systems, Flat Screens, Smart Phones, iPods & MP3 Players!
The Wi-AudioLink transmitter support consumer digital devices connection such as Computers, iPods,
MP3 Players, Media players, Smart Phones, Stereo Systems, Flat Screen Displays and any device with
headphone jack.
Please visit our web site at www.jangusmusic.com for the
consumer devices optional cable connection accessories
1. For MP3, Smart Phones and Computer connections, locate the optional
1/8” stereo to 1/8” stereo cable. (Optional cables are not supplied with the kit)
Audio Cable
For Flat screen TVs and Stereo Systems connection, locate the optional
1/8” stereo male to Y-split RCA cable. (Optional cables are not supplied with the kit)
2. Connect the 1/8” stereo end of the cable into
the “Audio Input” jack on the transmitter dongle.
3. Rout the audio cable beneath the belt clip as shown to
prevent accidental disconnection of cable
26
Belt Clip
Wi-AudioLink
TRANSMITTER CONNECTION
4. For MP3, Smart Phones and Computer connections, connect the
1/8” stereo male end of the cable to the headphone jack located
on your electronic device.
For Flat screen TVs and Stereo Systems connection, connect the
two RCA male ends of the cable to the left and right audio outputs located
on the back panel of the electronic device.
5. Power up the transmitter by pressing and holing the POWER button
6. Press and hold the Mode button
for stereo Line-in mode operations.
kfor 2 seconds.
until the Blue LED display two fast flashes
F Please refer to the “Tx Button Function Matrix” section of this manual for detailed instructions .
(Tx)
7. Place the transmitter (Tx) dongle next to the electronic device.
F Please proceed to page 28 for the receiver connection
27
Wi-AudioLink
RECEIVER CONNECTION
Connecting Analog and Digital Devices to Receiver!
The Wi-AudioLink receiver support professional digital instruments connection such as Mixers, Amplifiers,
Sound Systems, Speaker, Hard Disk Recorders, Samplers, Effects Pedals, Mixers, JD gear, and more..
Please note connections must be made with the power turned off.
Please be aware that careless operation may damage your speaker
system or cause malfunctions.
If you’ve connected a stereo audio amp, be aware that playing at
high volume may damage your speaker system. Be careful not to
raise the volume excessively.
Audio Output
Jack
1. For (Mono) connection locate the 1/4” mono to 1/8” stereo cable
For (Stereo) connection locate the 1/4” stereo Y-split to 1/8” stereo cable
2. Connect the 1/8” stereo end of the cable into the “Audio Input” jack
on the transmitter dongle.
28
1/4” Stereo Y-Split to 1/8’
Stereo Cable
Wi-AudioLink
RECEIVER CONNECTION
3. Rout the audio cable beneath the belt clip as shown to prevent
accidental disconnection of cable
Audio Cable
4. Connect the 1/4” male end of the cable to the inputs of your
amplifier, powered monitor, sound system, mixer or foot pedal.
If you’re using the Wi-Audiolink receiver in stereo,
use both the L/ MONO and R jacks on your
foot pedal, sampler or use two channels on
your sound system, mixer or hard disk recorder.
Belt Clip
Audio Input
POWER
LINK
29
Wi-AudioLink
RECEIVER CONNECTION
(Rx)
4. Turn ON the receiver (Rx) dongles by pressing and holding the
POWER button
on the receiver dongle for 2 seconds.
F The Power Status LED on the receiver (Rx) will show Solid Green LEDs
F The flashing Green LED on the transmitter (Tx) will turn to Solid Green indicating
communications between (Tx) and (Rx) is established.
5. Place the receiver dongle on the amp as shown. Alternatively the
receiver can be placed on the floor next to the foot pedal or stomp box.
6. Power up your Amp, Mixer, Digital Recorder or Foot pedal are you
are ready to go!
POWER
LINK
30
Wi-AudioLink
RECEIVER CONNECTION
Connecting Headphones and In-Ear Professional Personal Monitors!
Audio Output Jack
PLEASE PROTECT YOUR EARS! Prolonged use of headphones or
In-Ear personal monitors at high volumes may affect your hearing
capacity or may result in noise induced hearing loss (NHL).
1. Connect the 1/8” stereo connector end of your headphone or In-Ear
personal monitor into the “Audio Output” jack on the receiver dongle.
In-ear Personal Monitors
Audio Cable
2. Rout the audio cable beneath the belt clip as shown to prevent
accidental disconnection of cable
3. First turn ON the receiver dongle by pressing and holding the
POWER button
on the receiver dongle for 2 seconds.
F The Power Status LED on the receiver (Rx) will show Solid Green LEDs
F The flashing Green LED on the transmitter (Tx) will turn to Solid
Green indicating communications between (Tx) and (Rx) is established.
Belt Clip
(Rx)
31
Wi-AudioLink
RECEIVER CONNECTION
Connecting Computers and Stereo Systems!
The Wi-AudioLink receiver support consumer digital devices connection such as Computers, iPods, MP3
Stereo Systems, Notebook and Desktop Computers.
Please visit our web site at www.jangusmusic.com for the
consumer devices optional cable connection accessories
1. For notebook and desktop Computer connections, locate the optional
1/8” stereo to 1/8” stereo cable. (Optional cables are not supplied with the kit)
For stereo systems connection, locate the optional
1/8” stereo male to Y-split RCA cable. (Optional cables are not supplied with the kit)
2. Connect the 1/8” stereo end of the cable into
the “Audio Input” jack on the transmitter dongle.
3. Rout the audio cable beneath the belt clip as shown to
prevent accidental disconnection of cable
32
Audio Output
Jack
1/4” Stereo Y-Split to 1/8’
Stereo Cable
Wi-AudioLink
RECEIVER CONNECTION
3. Rout the audio cable beneath the belt clip as shown to
prevent accidental disconnection of cable
Audio Cable
4. For notebook and desktop computer connections, connect the
1/8” stereo male end of the cable to the headphone jack located
on your electronic device.
For stereo systems connection, connect the two RCA male ends of
the cable to the left and right outputs located on the back panel of the
electronic device.
Belt Clip
(Rx)
5. First turn ON the receiver dongle by pressing and holding the
POWER button
on the receiver dongle for 2 seconds.
F The Power Status LED on the receiver (Rx) will show Solid Green LEDs
F The flashing Green LED on the transmitter (Tx) will turn to Solid
Green indicating communications between (Tx) and (Rx) is established.
6. Place the receiver dongle on top of the stereo system or next to your computer.
7. Power up your stereo system or computer and are you are ready to go!
33
Wi-AudioLink
Tx FUNCTION MATRIX
Transmitter (Tx) Button Function Matrix!
Function		
Button
Activation			
Hold Time
k POWER Press and Hold		
Pairing Mode		
Press and Hold		
p LINK
Signal Re-routing
Click 			
p LINK
Volume UP/Down		
Click for Step, Press and hold for Auto
mn
Mute ON/OFF		
Press and Hold		
Sleep / Wake up		
Press and Hold to Sleep / Click to Wake
Passive Guitar Mode r MODE
Press and Hold		
(Factory setting)						
Power ON/OFF
LED Status
3 sec
Solid Green
2 sec
Fast Green Flashes
Click
Click
2 sec
Solid Green Blue Flash
3 sec
2 Green Flashes
2 sec
Solid Green LED and
Slow Blue LED Flashes
Active Guitar Mode
MODE
Press and Hold 		
2 sec
(Mono Line-in)						
Line in Mode		
MODE
Press and Hold		
2 sec
(Stereo Line-in)						
Solid Green LED and
Fast Blue LED Flashes
Solid Green LED and
Two Blue LED Flashes
34
Wi-AudioLink
Tx LED INDICATOR CHART
Transmitter (Tx) LED Indicator Chart!
Function		
Searching For Receiver		
Linked to Receiver		
Low Battery			
Charging With Power OFF		
Charging With Power ON		
Charging Complete		
LED Status
Flashing Green
Solid Green
Solid Green & Flashing Red
Solid Red
Solid Red & Green
Red OFF
35
Wi-AudioLink
Rx FUNCTION MATRIX
Receiver (Rx) Button Function Matrix!
Function		
Button
v POWER
Pairing Mode		
z LINK
Volume UP/Down		
xy
Mute ON/OFF		
Play/Pause			
Next Track			
Prev Track			
Power ON/OFF
36
Activation			
Hold Time
LED Status
Press and Hold		
3 sec
Solid Green
Press and Hold		
3 sec
Fast Green Flashes
Click for Step, Press and Hold for Auto Click
Press and Hold		
3 sec
Click (With Optional USB Tx Dongle)
Click
Click (With Optional USB Tx Dongle)
Click
Click (With Optional USB Tx Dongle)
Click
Solid Green & Blue
Wi-AudioLink
Rx LED INDICATOR CHART
Receiver (Rx) LED Indicator Chart!
Function			
Searching For Receiver		
Linked to Receiver		
Sleep			
Low Battery			
Charging With Power OFF		
Charging With Power ON		
Charging Complete		
LED Status
Flashing Green
Solid Green
2 Green Flashes (Activated By Tx)
Solid Green & Flashing Red
Solid Red
Solid Red & Green
Red OFF
37
Wi-AudioLink
PRODUCT SPECIFICATIONS
Product Technical Specifications!
Specifications		
Frequency:			
Frequency Response:		
Communications Frequency Selection:
S/N Ratio:			
Audio Input / Output:		
Max Input Level:		
Max Output Level:		
Input Impedance:		
Output Impedance:		
Battery Life:			
Battery Type:			
38
2.4 GHz, 16bit, 48KHz Digital Wireless Communications
10Hz to 20Khz
Auto Select
More than 90 dB (A-weighted) for stereo line-in mode
More than 87 dB (A-weighted) for passive and active guitar modes
3.5mm Stereo Jack
3Vrms
700mVrms		
1M ohm
< 10 ohm
6.5 hours
Internal Rechargeable Batteries
Wi-AudioLink
PRODUCT SPECIFICATIONS
Specifications		
Battery Power Boost:		
19.5 hours (With optional AA battery power booster adapter)
USB Bus Power		
Low Battery Alert:		
Yes
15 Minutes of Life Left
Power-up Modes		
Antenna:			
Range:			
Units operating at the same time:
Signal Patch Audio Matrix:		
MAC/PC Compatible:		
VoIP Capable:		
802.11g/n Network Safe:		
Transmitter Weight		
Receiver Weight		
Dimensions			
Three (3) Power-up Modes
(Line-in/Active Guitars, Passive Guitars, Electric Acoustic)
Internal Antennas
150 to 300 Feet (May not be dependent on line of sight)
12
One (1) transmitter can re-rout audio signal to eight (8) different receivers
Yes (With Optional USB Transmitter Dongle)
No
Yes
0.068 lbs
0.056 lbs
1.2” W x 0.6” D x 3.34” H
39
Wi-AudioLink
PRODUCT ACCESSORIES
Audio Matrix Accessories for Extreme Flexibility!
Accessory 		
Specifications		
Wi-StudioM:		
Digital wireless studio monitors headphones
Wi-USB Tx:		
Digital wireless USB transmitter for MAC/PC audio and VoIP applications
Wi-iPod Tx:		
Digital wireless transmitter for Apple iPod
Wi-AudioLink Tx:
Digital wireless transmitter for Digital Pianos, Keyboards, Electric Guitars,
Electric Acoustic Instruments, Digital Wind Instruments, Effects Pedals, Electronic
Drums, Mixers, Amplifiers, Speakers, Sound Systems, Samplers, Hard Disk Recorders,
DJ Gear, Computers, Consumer Electronics products and more.
Wi-AudioStream Tx:
Digital wireless transmitter for Mono and Stereo microphones and personal
monitoring systems including Ear-Worn Microphones, Clip-on Microphones, Acoustic,
Brass and Woodwind Instruments Microphones, MP3 players and more.
Wi-AudioLink Rx:
Digital wireless transmitter for In-ear Personal Monitors, Studio Headphone Monitors,
Effects Pedals, Mixers, Amplifiers, Speakers, Sound Systems, Samplers, Hard Disk
Recorders, DJ Gear, Computers, Consumer Electronics products and more.
40
Wi-AudioLink
ACEESSORIES
Cable & Power Accessories for Extreme Flexibility!
Accessory 		
Specifications		
Wi-BodyFree Guitar Strap:
Guitar strap with built-in “Wi-PowerBooster” AA battery power booster adapter,		
“Wi-AudioLink” Rx receiver socket and cable routing management system for
the ultimate in BodyFree wireless performance experience.
Wi-PowerBooster:
AA battery power booster USB adapter with white LED light for charging and extending
the internal rechargeable batteries life on the Wi-Audiolink and Wi-AudioStream
transmitters and receivers up to 19 hours.
Wi-PowerAdapter:
Universal USB power adapter for charging the Wi-Audiolink and Wi-AudioStream
transmitters.
Please visit our web site at www.jangusmusic.com
for the optional cable connection accessories
41
Wi-AudioLink
GREEN ENVIRONMENT
Disposal and Recycling Information!
Correct Disposal		
This symbol indicates that your product must be disposed
of properly according to the local laws and regulations.
When your product reaches its end of life, contact the retailer
where the product was purchased or your local authorities to
learn about recycling options.
This product should not be mixed with other commercial
wastes for disposal.
42
Wi-AudioLink
FCC NOTICES
Regulatory Compliance Information
Compliance Statement		
This device complies with part 15 of the FCC rules. Operations is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operations.
Disclaimers		
This manual is published by Jangus Music, Inc. The information contained in this document is subject to change
without notice. © 2009 Jangus Music, Inc. All rights reserved. Wi, Wi-AudioLink, Digital Wireless Stereo logo and
Jangus Music logos are registered trademarks of Jangus Music, Inc. in the United States and may be registered
trademark or trademarks in other countries. All other trademarks included herein are the property of their
perspective owners.
43
w w w.jangusmusic.com
© 2009 Jangus Music, Inc. All rights reserved. Wi, Wi-AudioLink, Digital Wireless Stereo logo and Jangus Music logo are
registered trademarks of Jangus Music, Inc. in the United States and may be registered trademark or trademarks in other
countries. All other trademarks included herein are the property of their perspective owners.
(Design and specifications subject to change without notice).

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-702
Modify Date                     : 2009:07:21 10:01:02-04:00
Create Date                     : 2009:07:21 09:35:38+08:00
Metadata Date                   : 2009:07:21 10:01:02-04:00
Creator Tool                    : Adobe InDesign CS3 (5.0.4)
Format                          : application/pdf
Document ID                     : uuid:a348b3c7-3480-41c5-a123-a84c18b7f45e
Instance ID                     : uuid:83ee3653-a656-40e2-a269-36065510e37e
Producer                        : Adobe PDF Library 8.0
Has XFA                         : No
Page Count                      : 44
Creator                         : Adobe InDesign CS3 (5.0.4)

EXIF Metadata provided by EXIF.tools