Technicolor Connected Home USA DCI401GEU2 wirelessly controlled converter box User Manual Copyrights

Technicolor Connected Home USA LLC wirelessly controlled converter box Copyrights

Contents

Manual Part 2

Important Safety Instructions  Read these instructions.  Keep these instructions.  Heed all warnings.  Follow all instructions.  Do not use this apparatus near water.  Clean only with dry cloth.  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.  Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.  Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.  Only use attachments/accessories specified by the manufacturer.  Unplug this apparatus during lightning storms or when unused for long periods of time.  Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.  If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.  To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.  Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.  Warning: Use only the power supply that came with your unit. If the power supply needs to be replaced, contact your service operator or dealer to obtain an authorized replacement.  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
2  This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.  If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Ensuring optimum performance  Disconnect the product from the power before you connect the product to (or disconnect it from) any other equipment. Avoid any contact with the power, which can be lethal or cause severe electric shock.  Do not insert anything into any opening of the case.  Leave the power socket accessible so that you can unplug the set quickly.  Leave 2 to 3 inches around the product to ensure proper ventilation to it.  To clean the product, use a dry clean soft cloth with no cleaning solvent or abrasive products. Clean the ventilation openings regularly. Environmental information  The batteries use some hazardous substances which pollute the environment. Do not dispose of them with other articles. Take care to dispose them at special collecting points. Technical specifications Model type DCI401xxxx Operating voltage 120V AC / 60 Hz / 0.5A Typical Power consumption 5.0W (typical)max 6.0W (max) Weight 0.42 Lb Dimensions (W x H x D) 4.33 x 0.96 x 3.19 Inches Operating temperature range 59 to 104° F / 15 to 40°C Storage temperature range -4 to 158°F / -20 to 70°C Manufactured under license from Dolby Laboratories.
3 ! FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device is intended to be attached to a receiver that is not used to receive over-the-air broadcast signals. Connection of this device in any other fashion may cause harmful interference to radio communications and is in violation of the FCC Rules, part 15. FCC & IC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the exemption from the routine evaluation limits in section 2.5 of RSS 102. Responsible party (contact for FCC matter only): Technicolor USA, Inc. 101 W. 103rd St. Indianapolis, IN 46290 U.S.A. Tel: 866-670-4844 This device complies with Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Meaning of symbols This symbol is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product housing that may be of sufficient magnitude to constitute a risk of shock. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions accompanying the product.

Navigation menu