Technicolor Connected Home USA DCI401GEU2 wirelessly controlled converter box User Manual Copyrights

Technicolor Connected Home USA LLC wirelessly controlled converter box Copyrights

Contents

Manual Reg Part

Important Safety Instructions  Read these instructions.  Keep these instructions.  Heed all warnings.  Follow all instructions.  Do not use this apparatus near water.  Clean only with dry cloth.  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.  Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.   Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.  Only use attachments/accessories specified by the manufacturer.   Unplug this apparatus during lightning storms or when unused for long periods of time.  Refer all servicing to qualified service personnel.  Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.  If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.   To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.  Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.  Warning:  Use only the power supply that came with your unit.  If the power supply needs to be replaced, contact your service operator or dealer to obtain an authorized replacement.    Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.  NOTE  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
 2  This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.   If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,  the user is encouraged to try to correct the interference by one or more of the following measures:  —Reorient or relocate the receiving antenna.  —Increase the separation between the equipment and receiver.  —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  —Consult the dealer or an experienced radio/TV technician for help.  Ensuring optimum performance  Disconnect  the  product  from  the  power  before  you  connect  the  product  to  (or disconnect it from) any other equipment. Avoid any contact with the power, which can be lethal or cause severe electric shock.   Do not insert anything into any opening of the case.  Leave the power socket accessible so that you can unplug the set quickly.  Leave 2 to 3 inches around the product to ensure proper ventilation to it.   To clean the product, use a dry clean soft cloth with no cleaning solvent or abrasive products. Clean the ventilation openings regularly.   Environmental information  The batteries use some hazardous substances which pollute the environment. Do not dispose of them with other articles. Take care to dispose them at special collecting points.  Technical specifications  Model type DCI401xxxx Operating voltage 120V AC / 60 Hz / 0.5A Typical Power consumption 5.0W (typical)max 6.0W (max) Weight 0.42 Lb  Dimensions (W x H x D) 4.33 x 0.96 x 3.19 Inches Operating temperature range 59 to 104° F / 15 to 40°C Storage temperature range -4 to 158°F / -20 to 70°C     Manufactured under license from Dolby Laboratories.
 3 ! FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the  following two conditions: (1) This device may not  cause  harmful interference,  and  (2)  this  device  must  accept  any  interference  received, including interference that may cause undesired operation.  This  device  is  intended  to  be  attached  to  a  receiver  that  is  not  used  to receive  over-the-air  broadcast  signals.  Connection  of  this  device  in  any other  fashion  may  cause  harmful  interference  to  radio  communications and is in violation of the FCC Rules, part 15.  FCC & IC Radiation Exposure Statement  This equipment complies with FCC radiation exposure limits set forth  for an uncontrolled environment and meets the exemption from the  routine evaluation limits in section 2.5 of RSS 102.                          Responsible party (contact for FCC matter only): Technicolor USA, Inc. 101 W. 103rd St. Indianapolis, IN 46290 U.S.A. Tel: 866-670-4844    This  device  complies  with  Industry  Canada  licence-exempt  RSS standard(s).Operation is subject to the following two conditions: (1) this device  may not  cause  interference,  and  (2)  this device  must accept  any interference, including interference that may cause undesired operation of the  device.  Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux  appareils  radio  exempts  de licence.  L'exploitation  est  autorisée  aux deux  conditions  suivantes  :  (1)  l'appareil  ne  doit  pas  produire  de brouillage,  et  (2)  l'utilisateur  de  l'appareil  doit  accepter  tout  brouillage radioélectrique  subi,  même  si  le  brouillage  est  susceptible  d'en compromettre le fonctionnement.  Meaning of symbols This symbol is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product housing that may be of sufficient magnitude to constitute a risk of shock.    This  symbol  is  intended  to  alert  the  user  to  the  presence  of  important operating  and  maintenance  (servicing)  instructions  accompanying  the product.

Navigation menu