Technicolor Connected Home USA DCI401GEU2 wirelessly controlled converter box User Manual Copyrights

Download:
Mirror Download [FCC.gov]
Document ID	1504620
Application ID	DrH1QqxRTSHZyNZ3Qzeulw==
Document Description	Manual Reg Part
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	9.41kB (117654 bits)
Date Submitted	2011-07-20 00:00:00
Date Available	2011-07-20 00:00:00
Creation Date	2011-07-01 14:48:27
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2011-07-01 14:48:27
Document Title	Copyrights
Document Creator	Microsoft® Office Word 2007
Document Author:	THOMSON

Important Safety Instructions
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long periods of
time.
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
If an outside antenna or cable system is connected to the product, be sure the
antenna or cable system is grounded so as to provide some protection against
voltage surges and built-up static charges.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture.
Batteries (battery pack or batteries installed) shall not be exposed to excessive heat
such as sunshine, fire or the like.
Warning: Use only the power supply that came with your unit. If the power supply
needs to be replaced, contact your service operator or dealer to obtain an authorized
replacement.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.


















NOTE
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.



This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Ensuring optimum performance
Disconnect the product from the power before you connect the product to (or
disconnect it from) any other equipment. Avoid any contact with the power, which
can be lethal or cause severe electric shock.
Do not insert anything into any opening of the case.
Leave the power socket accessible so that you can unplug the set quickly.
Leave 2 to 3 inches around the product to ensure proper ventilation to it.
To clean the product, use a dry clean soft cloth with no cleaning solvent or abrasive
products. Clean the ventilation openings regularly.





Environmental information

The batteries use some hazardous substances which pollute the environment. Do not
dispose of them with other articles. Take care to dispose them at special collecting
points.
Technical specifications
Model type
DCI401xxxx
Operating voltage
120V AC / 60 Hz / 0.5A
Typical Power
5.0W (typical)max
consumption
6.0W (max)
Weight
0.42 Lb
Dimensions (W x H x
4.33 x 0.96 x 3.19
D)
Inches
Operating
59 to 104° F / 15 to
temperature range
40°C
Storage temperature
-4 to 158°F / -20 to
range
70°C
Manufactured under license from Dolby Laboratories.
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This device is intended to be attached to a receiver that is not used to
receive over-the-air broadcast signals. Connection of this device in any
other fashion may cause harmful interference to radio communications
and is in violation of the FCC Rules, part 15.
FCC & IC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment and meets the exemption from the
routine evaluation limits in section 2.5 of RSS 102.
Responsible party (contact for FCC matter only):
Technicolor USA, Inc.
101 W. 103rd St.
Indianapolis, IN 46290 U.S.A.
Tel: 866-670-4844
This device complies with Industry Canada licence-exempt RSS
standard(s).Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of
the
device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
Meaning of symbols
This symbol is intended to alert the user to the presence of un-insulated
“dangerous voltage” within the product housing that may be of sufficient
magnitude to constitute a risk of shock.
This symbol is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions accompanying the
product.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 3
Language                        : en-US
Tagged PDF                      : Yes
Title                           : Copyrights
Author                          : THOMSON
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2011:07:01 14:48:27
Modify Date                     : 2011:07:01 14:48:27
Producer                        : Microsoft® Office Word 2007

EXIF Metadata provided by EXIF.tools