Technicolor Delivery Technologies Belgium TC8706T Cable Modem User Manual 37124070 TISsafety P1
Technicolor Delivery Technologies Belgium Cable Modem 37124070 TISsafety P1
Contents
- 1. User Manual (Regulatory Notices)
- 2. User Manual (Safety Instructions)
- 3. User Manual
User Manual (Safety Instructions)
Imp
Read these instructions.
ortant Safety Instructions
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long periods of
time.
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
If an outside antenna or cable system is connected to the product, be sure the
antenna or cable system is grounded so as to provide some protection against
voltage surges and built-up static charges.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture.
Batteries (battery pack or batteries installed) shall not be exposed to excessive heat
such as sunshine, fire or the like.
Warning: Use only the power supply that came with your unit. If the power supply
needs to be replaced, contact your service operator or dealer to obtain an authorized
Do not insert anything into any opening of the case.
Leave the power socket accessible so that you can unplug the set quickly.
Leave 2 to 3 inches around the product to ensure proper ventilation to it.
To clean the product, use a dry clean soft cloth with no cleaning solvent or abrasive
products. Clean the ventilation openings regularly.
Environmental information
The batteries use some hazardous substances which pollute the environment. Do not
dispose of them with other articles. Take care to dispose them at special collecting
points.
Technical specifications
Model type DCI401COM3
Operating voltage 120V AC / 60 Hz / 0.2A
Typical Power
consumption
5.0W (typical)max
6.0W (max)
Weight 0.42 Lb
Dimensions (W x H x
D)
4.33 x 0.96 x 3.19
Inches
Operating
temperature range
59 to 104° F / 15 to
40°C
Storage temperature
range
-4 to 158°F / -20 to
70°C
Manufactured under license from Dolby Laboratories.
Copyright ©1998-2005 The OpenSSL Project. All Rights Reserved
This product includes software developed by the OpenSSL
Project for use in the OpenSSL toolkit (http://www.openssl.org/)
This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)
This product includes software written by Tim Hudson (tjh@cryptsoft.com)
Copyright © 1995-1998, Eric Young All rights reserved
This package is an SSL implementation written by Eric Young (eay@cryptsoft.com).
This product includes software written by Tim Hudson (tjh@cryptsoft.com) 37124070
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user's authority
to operate the equipment.
Normal use of this product should be at distances of 20cm (8 inches) or
more from your body.
!
Meaning of symbols
This symbol is intended to alert the user to the presence of un-insulated
“dangerous voltage” within the product housing that may be of sufficient
magnitude to constitute a risk of shock.
This symbol is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions accompanying the
product.
Ens
Disconnect the product from the power before you connect the product to (or
disconnect it from) any other equipment. Avoid any contact with the power, which
can be lethal or cause severe electric shock.
uring optimum performance