Techsan I and C PT4200U PDP Monitor User Manual Helios NTSC Luce pdf

Techsan I & C Co., Ltd. PDP Monitor Helios NTSC Luce pdf

Contents

User Manual 1

REPORT NO : HCT-F03-1203 FCC ID : RJ5PT4200U DATE :DECEMBER 22,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr ATTACHMENT D. - USER’S GUIDE
Table of ContentsOWNER'S MANUAL1Important Safety Information .......................................................................................................................... 2Overview Of Your New PDP ............................................................................................................................ 7 Control Button.............................................................................................................................................. 7Control Button Key Function....................................................................................................................... 7Connecting To External Equipment ........................................................................................................... 8RS-232C Configurations............................................................................................................................. 9Accessories ....................................................................................................................................................... 11Features Of The Remote Control.................................................................................................................... 12Loading The Batteries ................................................................................................................................. 13Reception Range Of Remote Control ........................................................................................................ 13Monitor Installation ........................................................................................................................................... 14Wall Mount (optional) Installation................................................................................................................ 14Table Stand (optional) Installation .............................................................................................................. 15Speaker Installation..................................................................................................................................... 17Optional Extras.................................................................................................................................................. 21Watching TV....................................................................................................................................................... 22To watch TV (When the Interface board is installed) ................................................................................ 22Watching VCR.................................................................................................................................................... 23To watch VCR (When the Interface board is installed) ............................................................................. 23Watching DVD(Interlace).................................................................................................................................. 24How to connect (When the Interface board is installed)............................................................................ 24How to use (When the Interface board is installed)................................................................................... 24Watching DVD(Progressive) ........................................................................................................................... 25Connecting The PC........................................................................................................................................... 26Compatible Display Monitor Specification ................................................................................................... 44OSD Structure.................................................................................................................................................... 27Picture .......................................................................................................................................... 28PIP ........................................................................................................................................................ 29SOUND ............................................................................................................................................................... 31SETUP ........................................................................................................................................................... 34CHANNEL........................................................................................................................................................... 35FUNCTION ........................................................................................................................................................ 38TIME ............................................................................................................................................................... 40Hot Key Function By Remote Control ........................................................................................................... 42Specification ...................................................................................................................................................... 45Troubleshooting................................................................................................................................................ 47United States Retail Warranty Card............................................................................................................... 48
Important Safety InformationOWNER'S MANUAL2WAR NINGThis is a C lass B product. In a domestic environment this product may cause radio interference in which casethe user may be required to take adequate measures.FC C NOTIC EThis device has been tested and found to comply with the limits for a C lass B device, pursuant to P art 15 of the F C C R ules.These limits are designed to provide reasonable protection against harmful interference in a commercial, industrial orbusiness environment. This equipment can generate, use and radiate radio frequency energy and, if not installed and usedin accordance with the instruction, may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try tocorrect the interference by one or more of the following measures :- R eorient or relocate the receiving antenna.- Increase the s eparation between the equipment and receiver.- C onnect the equipment into an outlet on a circuit different from that to which the receiver is connected.- C onsult the dealer or an experienced radio/TV technician for help.C hanges or modification not expressly approved by the party responsible for compliance could void the user's authority tooperate the equipment.C onnecting of peripherals requires the use of ground shielded signal cables.WA R NING : To reduc e the ris k of electric s hock do not remove cover or bac k. Nous er-s erviceable parts ins ide. R efer s ervicing to qualified s ervic e pers onnel.The lightning flash witharrow-head within a triangleis intended to tell the userthat parts inside the productare a risk of electric shock topersons.The exclamation point withina triangle is intended to tellthe user that importantoperating and servicinginstructions are in the paperswith the appliance.WAR NING. e yourRead all safety and operatinginstructions before operating yourMonitor.Keep the safety and operatinginstructions for future reference.Read all warnings on the Monitor andin the operating instructions.Warning andInstructionWarning andInstructionWarning andInstructionAlways be careful when using your Monitor. To reduce the risk of fire, electrical shock,and other injuries, keep these safety precautions in mind when installing, using, andmaintaining your machine.
Keep these ins tructionsFollow all ins tructionsDo not use this apparatus near warterClean only with a dry clothDo not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement ofthe obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the point where they exit from the apparatus. Only use the attachments/accessories specified by the manufacturer. Use only with a cart, stand, tripod, bracket, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury form tip-overDo not install near any heat sources such as radiators, heat registers, stoves, or other apparatus ( including amplifiers) that produce heat. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions Unplug this apparatus during lightning storms or whe unused for longperiods of time Refer all servicing to qualified service personnel. Servicing is required when theapparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has veen exposed to rain or moisture , does not operate normally, or has been dropped CAUTION - This stand intended for use only with idisplay.tv , iP#-42S$@, PDP TV monitor. Use with other appratus is capable of resulting in instability causing possible injury CAUTION - These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you qualified to do so CAUTION - Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the appratus R ead these ins tructions1.2.3.4.5.6.7.8.9.10.11.12.13.14.15.Important Safety InformationOWNER'S MANUAL3All the safety and operating instructions shall be read before the appliance is operated.Retain instructionsThe safety and operating instructions shall be retained for future reference.Heed all warningsAll warnings on the appliance and in the operating instructions shall be adhered to.All operating and use instructions shall be followed..e your
Important Safety InformationOWNER'S MANUAL4Provide ventilation for the Monitor. The unit is designedwith slots in the cabinet for ventilation to protect it fromoverheating. Do not block these openings with any object,and do not place the Monitor on a bed, sofa, rug, or othersimilar surface. Do not place it near a radiator or heatregister. If you place the Monitor on a rack or bookcase,ensure that there is adequate ventilation and that you'vefollowed the manufacturer's instructions for mounting.Use only the accessory cord designed for this product toprevent shock. The power supply voltage rating of thisproduct is AC100-240V and the power cord attached conformsto the above power supply voltage. Use only the powercord designated by our dealer to ensure Safety and EMC.When it is used by other power supply voltage, the power cablemust be changed. Consult your product dealer.Unplug the Monitor from the wall outlet and disconnect theantenna or cable system during a lightening storm or when leftunattended and unused for long periods of time. This willprevent damage to the unit due to lightening and power-linesurges.Protect the power cord. Power supply cords should berouted so that they won't be walked on or pinched byobjects placed on or against them. Pay particular attentionto cords at plugs, convenience receptacles, and the pointwhere they exit from the unit.Use only a grounded or polarized outlet. For your safety, thisMonitor is equipped with a polarized alternating current lineplug having one blade wider than the other. This plug will fitinto the power outlet only one way. If you are unable to insertthe plug fully into the outlet, try reversing the plug. If the plugstill does not fit, contact your electrician to replace your outlet.Avoid overhead power lines. An outside antenna systemshould not be placed in the vicinity of overhead power linesor other electric light or power circuits or where it can fall intosuch power lines or circuits. When installing an outsideantenna system, be extremely careful to keep from touchingthe power lines or circuits. Contact with such lines can be fatal.
Important Safety InformationOWNER'S MANUAL5Do not overload the wall outlet orextension cords. Overloading canresult in fire or electric shock.Do not insert anything through theopenings in the unit, where they cantouch dangerous voltage points ordamage parts. Never spill liquid ofany kind on the Monitor.Bend antenna cable between insideand outside building to prevent rainfrom flowing in.- This may cause water damagedinside the Monitor and could give anelectric shock.Do not place an outside antenna inthe vicinity of overhead power lines orother electric light or power circuits.- This may cause and electric shock.There should be an enough distancebetween an outside antenna andpower lines to keep the former fromtouching the latter even when theantenna falls.- This may cause an electric shock.Do not attempt to service the Monitor yourself. Refer all servicing to qualified servicepersonnel. Unplug the unit from the wall outlet and refer servicing to qualified servicepersonnel under the following conditions:• when the power-supply cord or plug is damaged• if liquid has been spilt on the unit or if objects have fallen into the unit• if the Monitor has been exposed to rain or water• if the Monitor does not operate normally by following the operating instructions• if the Monitor has been dropped or the cabinet has been damaged• when the Monitor exhibits a distinct change in performanceGround outdoor antennas. If an outside antenna or cable system is connected to the Monitor, be sure theantenna or cable system is grounded so as to provide some protection against voltage surges and built-upstatic charges. Section 810 of the National Electrical Code, ANSI/NFPA No.70-1984, provides informationabout proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antennadischarge unit, size of grounding conductors, location of antenna discharge unit, connection to groundingelectrodes, and requirements for the grounding electrode.
Important Safety InformationOWNER'S MANUAL6When replacement parts arerequired, be sure the servicetechnician use replacement partsspecified by the manufacturer orthose that have the samecharacteristics as the original part.Unauthorized substitutions may resultin additional damage to the unit.Upon completion of any service orrepairs to this Monitor, ask theservice technician to perform safetychecks to determine that the Monitoris in a safe operating condition.If you make adjustments yourself,adjust only those controls that arecovered by the operating instructions.Adjusting other controls may result indamage and will often requireextensive work by a qualifiedtechnician to restore the Monitor tonormal.Use only the specified batteries.- This may cause damage to theMonitor or could give an electricshock.Do not place anything containingliquid on top of the Monitor.- This may cause a fire or could give anelectric shock.In case of smoke or strange smellfrom the Monitor, switch it off, unplugit from the wall outlet and contactyour dealer or service center.- This may cause a fire or could give anelectric shock.The recommended viewing distant is5~7 times farther out than the diagonallength of the screen.- If not, eyes may strain.When moving the Monitor assembledwith speakers, do not carry holdingthe speakers.- This may cause the Monitor to fall,causing serious injury to a child oradult, and serious damage to theMonitor.Avoid having a fixed image remainon the screen for a long period oftime. Typically a frozen still picturefrom a VCR, 4:3 picture format or ifa CH label is present; the fixedimage may remain visible on thescreen.
Overview Of Your New PDPOWNER'S MANUAL7Input S ignal S ource S electMENU SelectAudio Volume Down/UpCHANNEL Down/UpRemoncon Sensor or P ower (S tand B y)OS D B utton & F unction12345OSD ButtonOSD Key FunctionS elect the signal source from multiple input source such as T V, VIDEO , S -Video, DTV, DVD , DVIPC and DTV Y P bPr.S E L E C TC hange the audio level in normal display mode and move the scroll bar in Volume control menu.VOL - / VOL +Turn on and off the main power.P OW E R<Front Panel>MENU VOL CHOSD Menu Control.MENUC hange the TV Channel control menu.CH- / CH+
OWNER'S MANUAL8Connecting To External EquipmentConnect DVI Computer Source (Digital Signal) here. Contact your dealer for buying optional item.DVI INP UT(Optional)Connect to the audio output terminal of a DVI, PC or similar source of device.AUDIO INPUT TERMINALControl the monitor's functions externally by external equipment. Connects to the computer RS-232C outputterminal.R S -232C INP UT C ONT R OL TE R MINALOverview Of Your New PDPConnect PC Computer Source ( here. Contact your dealer for buying optional item.D-s ub 15pin (P C )AUDIOSERVICEAUDIO COMPOSITE AUDIOOUTINPIPEAR P.EXT. SPEAKERAUDIO OUTSPEAKERSWITCH+-+-POWERANTVHF / UHFS-VIDEOCVBSCVBSCOMPONENT(480i/480p/720p/1080i)RS-232C JACK DVI-D(Option) RGB(PC)DTVDVD EXT INTAUDIOSERVICERS-232C JACK DVI-D(Option) RGB(PC)AUDIOCOMPONENT(480i/480p/720p/1080i)DTVDVD
Overview Of Your New PDPOWNER'S MANUAL9AUDIO INP UTVIDE O INP UTS -VIDE O INP UTC OMP ONE NT VIDE O INP UTR GB INP UTR S -232CR C A P in J ackR C A P in J ackP in DidR C A Pin Jack15-pin D-sub9-pin D-subC onnec torsRS-232C Configurations Cables connecting PC's may vary depending on thePC types.•Connects to a component output terminal of a DVD player.Component Input(DVD Y,Pb,Pr) 480iConnects to an antenna cable.TV Antenna TerminalFixed Level Audio signal output to external audio amplifier(optional) or Headphones(Optional).Audio out / PIP EarphoneConnects to a composite output terminal of VCRs or DVD players or Monitor out.Composite Input/Output Terminal(VIDEO INPUT, MONITOR OUT)Firmly insert the accessory power cord as far as it will go into the power input terminal. Firmly push the power cord plug as far as it will go into the power socket.AC(POWER) Input TerminalConnects to a S-Video output terminal of a S-VHS VCRs or DVD players.S-Video Input TerminalSlide SwitchAudio out controller to internal or external. Connects to a component out put terminal of a Progressive DVD player or HD Set-Top Box.Component Input(DTV Y, Pb, Pr) 480p, 720p, 1080i COMPOSITE AUDIOOUTINPIPEAR P.EXT. SPEAKERAUDIO OUTSPEAKERSWITCH+-+-S-VIDEOCVBSCVBS EXT INTPOWERANTVHF / UHF
Overview Of Your New PDPOWNER'S MANUAL10AUDIOSERVICEAUDIO COMPOSITE AUDIOOUTINPIPEAR P.EXT. SPEAKERAUDIO OUTSPEAKERSWITCH+-+-POWERANTVHF / UHFS-VIDEOCVBSCVBSCOMPONENT(480i/480p/720p/1080i)RS-232C JACK DVI-D(Option) RGB(PC)DTVDVD EXT INTout
AccessoriesOWNER'S MANUAL11Remote Control HandsetP ower C ordShielded 4*30 : 2EA 4*16 : 2EA ScrewAlkaline Batteries (AAA)Owner's ManualF Type ConnectorTable Stand(Separated Type)
Features Of The Remote ControlOWNER'S MANUAL12When us ing the remote control, always point it directly at the IR s ens or of P las ma monitor.Activate PIP function on PC for DTV ModeP IP (Picture-in-picture)Jump back to previous TV channelP R E CHInput channel numberNumber keyActivate the OSD window, enter the sub-menuME NU / S E TActivate the temporary image freeze featureSTILLChange channel on TV mode, up or downC H+ / C H-Select the signal source from multiple inputsource of TV, Video, S-video, DVD , DTV, PCDVI(Optional)TV / VIDE OTurn the main power on and to stand byP OW E RMute on / offMUTEChange the image settings, ie; WIDE etc.ASPECTChange the audio level, increase or decreaseVOL + / VOL -Multi Channel Television Stereo. Select audio out mode tostereo or monoMTSSee information for selectecd channel INFOChoose three different modes of picture settingsP IC T UR EAutomatically adjust picture position and eliminate any image shakingPC AUTOChoose the best appropriate audio environment S OUNDSet TV timer for 30 min, 60 min, 90 min, 120 min, 180 min and 240 minS L E E PChange the video input source of the sub-picture when PIP is turned onSOURCEChange the sub-picture size large/small/doubleSIZESwaps the picture and the sub-pictureSWAPThe sub-picture TV channel scanC H SCANThe sub-picture channel up/downCH UP/DOWNMove the sub-picture the screenLOCATIONControl the caption decoder On/OffCAPTION
Features Of The Remote ControlOWNER'S MANUAL13Loading The BatteriesPress on the cover and slide in the direction of the arrow.1Load two AAA batteries, takingcare that the + and - ends face to the correct direction.2Close the cover until it clicks.3Reception range of Remote Control
Monitor InstallationOWNER'S MANUAL14Wall Mount (optional) InstallationThe Monitor can be installed in Wall Mount, Table Stand and Ceiling Mount• Install the monitor only in a location where adequate ventilation is available.<The monitor can be installed on the wall as shown above>
Monitor InstallationOWNER'S MANUAL15• Table Stand requires minimum allowable clearances for adequate ventilation.<The Monitor can be installed on a desk as shown above.>Table Stand (optional) InstallatidfdfdfonUnited type Table Stand (optional)
Monitor InstallationOWNER'S MANUAL16Ins tallation
Monitor InstallationOWNER'S MANUAL1742" External S peaker (Optional) Ins tallation Speaker Installation• Turn off monitor power before making any connec tions .P lace the speakers in the position you want. Install the speaker wires on the monitor and speaker. B e sure to connect thepositive Ò+Ó wire to the Ò+Ó input and the negative Ò-Ó wire to the ÒÐÓ input. C onnect left monitor input to left speaker and rightmonitor input to right speaker. Any extra speaker wire length remaining can be bunched into the wire holders provided.(C aution: Once installed, the speaker wire holders lock into position and canÕt be removed.)• Match the color of each connection on the speaker and monitor+-+-
Monitor InstallationOWNER'S MANUAL18External Speaker Accessories4-Metal Plates (Mount speakers to monitor) 8-4x16 Long Screws (Attach metal plates to speakers)8-4x8 Short Screws (Attach metal plates to monitor) 2-Speaker Wires
Monitor InstallationOWNER'S MANUAL1950" Speaker (Optional) Installation • Always lift the monitor itself (not the speakers) when handling or moving the monitor after speakers have been installed.Assemble the monitor to speaker using the supporter hanger and bolt. As shown above A, assemble the a and b ofsupporter hanger to the monitor using the bolt(M4x8). Assemble the c, d and e to the speaker using thebolt(4x16). If the bolts are tightened too much, the product could be damaged.• Match the color of each connection on the speaker and monitor.

Navigation menu