Techsan I and C PT4200U PDP Monitor User Manual Helios NTSC Luce pdf

Techsan I & C Co., Ltd. PDP Monitor Helios NTSC Luce pdf

Contents

User Manual 3

MANUAL PROGRAMPress VOL(◀/▶) button ,you can select.Use the number buttons to directly select the channel that will be added or erasedPress VOL(◀/▶) button channel selectPress CH( ▲/▼) button ADD/ERASERepeatedly pressing this button VOL(◀/▶) will alternate between “ADD’ and “ERASE”After all the available channel are stored , the menu press to exitADD/ERASEFINE TUNINGPress VOL(◀/▶) button ,you can select.Use the number buttons to directly select the channel tuningAfter all the available channel are stored , the menu press to exitPICTURE (TV & VIDEO)OWNER'S MANUAL34
LNAPress VOL(◀/▶) button On/Offyou can select.If the TV is operation in a weak-signal area , sometimes the LNAFunction can improve the reception ( a low-noise preamplifier theIncoming signal)After all the available channel are stored , the menu press to exitCAPTIONThe captions are usually subtitles for the hearing impaired or Foreign language translationsPress VOL(◀/▶) button on/off , you can select.Caption ONNot all programs and videos offer closed caption. Please look forThe “CC” symbol to ensure that captions will be shownMODEPress VOL(◀/▶) button on/off , you can selectFIELDPress VOL(◀/▶) button 1/2 , you can selectCHANNELPress VOL(◀/▶) button 1/2 , you can selectNOTEAll VCRs record the closed caption signal from television programs,so home-recorded video tapes also provide closed captions. Mostpre-recorder commercial video tapes provide closed captions as wellThe caption feature does not work with DVD or DTV signalsPICTURE (TV & VIDEO)OWNER'S MANUAL35
V-CHIPPress VOL(◀/▶) button , you can select.The V-CHIP feature automatically locks out programs that are deemed inappropriate for children. The user must enter PIN (personal ID number) before any of the V-CHIP restrictions are setup or changedCHANGE PINThe message “ Enter Pin” will appear. Enter your 4-digit PIN numberNote: The default PIN number of a new TV set is “ 0-0-0-0”The change pin screen will appear. Choose any 4-digits for your PIN and enter them.As soon as the 4 digits are entered, the “ Confirm New Pin” screen appears. Re-enter the same 4 digits. When the Confirm screen disappears, your PIN has been memorizedPress the MENU button to exitHow to Enable/Disable the V-ChipPress VOL (◀/▶) button , you can selectThe message “ENTER PIN” will appear. Enter your 4-digit Pin numberPress the MENU button exitV-CHIP FUNCTIONPush V-Chip button to activate V-Chip function menu.Input 4digit password(factory default password : 0000) And follow the directions.INPUT PASSWORD00 0 0V-CHIP MAINMPAA TV GUIDELINEPASSWORDPress SET Press SETPress SET▶Press VOL (◀/▶) button , you can selectPICTURE (TV & VIDEO)OWNER'S MANUAL36
MPAA RATINGSelect the block level.you can change the ‘SHOW’, ‘BLOCK’by using ◀▶keys.INPUT PASSWORDGPGPG-13RNC-17XSHOWSHOWSHOWSHOWSHOWSHOWTV GUIDELINESelect the TV guideline.you can change the ‘SHOW’, ‘BLOCK’by using ◀▶keys.TV GUIDELINETV-YTVY7TV-GTV-PGTV-14TV-MASHOWSHOWSHOWSHOWSHOWSHOWBLOCK CONTENT(TV GUIDELINE ▶CONTENT)You can change the ‘SHOW’, ‘BLOCK’by using ◀▶keys.BLOCK CONTENTDLSVFVSHOWSHOWSHOWSHOWSHOWGeneral audiences. All ages admitted.Parental guidance suggested. Some material may not be suitable for children.Parents strongly cautioned. Some material may be inappropriate for children under 13.Restricted. Under 17 requires accompanying parent or adult guardianNo one 17 and under admitted.A rating that has now been superseded by NC-17.Young childrenChildren 7 and overGeneral audienceParental guidanceViewers 14 and overMature audienceNote : The V-Chip will automatically block certain categories that are “more restrictive”. For example, if you block “TV-Y” category, then TV-Y7 will automatically be blocked. Similarly, if you block the TV-G category,then all the categories in the “young adult” group will be blocked (TV-G, TV-PG, TV-14 and TV-MA). The sub-ratings (D, L, S, V) work together similarly. (See next section.)Fantasy violenceDialogLSexual situationViolencePICTURE (TV & VIDEO)OWNER'S MANUAL37
Adjust the ASOECT RATIO, INFORMATION, KEY LOCK, PIXEL SHIFT, PROTECTION, AUTO POWER DOWN and IMAGE ADJUST on OSD menu.FUNCTIONASPECT RATIOPress VOL(◀/▶) button WIDE/NORMAL/ZOOM1ZOOM2,you can select.INFORMATIONPress VOL(◀/▶) button ,you can select.KEY LOCKPress VOL(◀/▶) button ON/OFF , you can select.PIXEL SHIFTPress VOL(◀/▶) button ON/OFF , you can select.PICTURE (TV & VIDEO & PC)OWNER'S MANUAL38
PROTECTIONPress VOL(◀/▶) button ON/OFF , you can select.The Picture remove after imageAUTO POWER DOWNPress VOL(◀/▶) button ON/OFF , you can select.power by decreasing picture brightness. IMAGE ADJUSTPress VOL(◀/▶) button , you can select.You can see below picture.Move where you want to adjust.AUTO ADJUSTPress VOL(◀/▶) button , you can select.Automatically adjust picture position and eliminate any image shaking.H-POSITIONPress VOL(◀/▶) button , you can select.Adjust the horizontal size of display.Only available when you are in PC/HD input mode.PICTURE (TV & VIDEO & PC)OWNER'S MANUAL39
V-POSITIONPress VOL(◀/▶) button , you can select.Moving the center of display image.After selecting Position menu, you can move the image usingFREQUENCYPress VOL(◀/▶) button , you can select.Adjust the horizontal size of display.Only available when you are in PC/HD input modePHASEPress VOL(◀/▶) button , you can select.Fine tuning of display accuracy on the screen. Only available when you are in PC/HD input mode.Setting the clock.TIMECLOCKPress VOL(◀/▶) button or CH( ▲/▼) selectMove the left or right to select hour, then move the remoconVOL(◀/▶) button or CH( ▲/▼) to select the correct hourON TIMEPress VOL(◀/▶) button , you are selectYou can set the Plasma TV to turn on and off at the times you specify PICTURE (PC & VIDEO)OWNER'S MANUAL40
TIMEPress VOL(◀/▶) button , you are selectMove the left or right to select hour, then move the remoconVOL(◀/▶) button or CH( ▲/▼) to select the correct hourCHANNELPress VOL(◀/▶) button , you are selectThe preferred channel can be set for when the timer automaticallythe TVVOLUMEPress VOL(◀/▶) button , you are selectThe preferred VOLUME can be set for when the timer automaticallythe TVOFF TIMEPress VOL(◀/▶) button , you are selectYou can set the Plasma TV to turn OFF and off at the times you specify SLEEP TIMEPress VOL(◀/▶) button , you are selectSelect your desirable setting time to turn off the TV automatically. 30 min, 60 min, 90 min, 180 min, 240min and “Off” can be selected. The timer will start to count down just after you select.PICTURE (TV & VIDEO)OWNER'S MANUAL41
Hot Key Function By Remote Control•MUTETo turn off the sound•TV / VIDEOSelect the signal source from multipleinput source of TV, AV1, S-Video, DTV ,DVD, PC. DVI•STILLPause function, press once again for reset.•INFOYou can see information regarding the channel that you select•PRE CHGo back to previous TV channel•100Press this button first for cable channels over 100•Menu/SetActivate the OSD window, enter the sub-menu or EXIT•CH+ / CH-Change the TV channel on TV mode up or down•VOL+ / VOL-Change the audio level, increase or decrease•ON/OFFPower on/off•SLEEPTV off time setting, push button for 30min, 60 min, 90 min, 180 min, 240min OWNER'S MANUAL42
Hot Key Function By Remote Control•ASPECTChange the image size setting, ie; WIDE/NOMARL/ZOOM1.ZOOM2, etc.•PC AUTOAutomatically adjust picture position and eliminate any image shaking.•COLOR TEMPSelect the color temperature of screenimage from Warm, Cool and Normal•PIP ON/OFFPIP mode On/Off•SOURCEChange the video input source of the sub-picturewhen PIP is turned on•SIZEChange the sub-picture size large/small/double•PICTUEREThe Picture mode feature allows you to choosethree different modes of picture settings •CAPTIONControl the caption decoder•SOUNDThe sound mode feature allows you to choosefour different modes of sound settings •PROTECTIONThe Picture remove after image•SWAPSwaps the picture and the sub-picture•CH SCANThe sub-picture channel scan ( TV source )•CH UP/DOWNThe sub-picture channel up/down•LOCATIONMove the sub-picture within the screenSTANDARDWARMWIDENORMAL•MTSControl Stereo/Mono settingOWNER'S MANUAL43
Compatible Display Monitor SpecificationOWNER'S MANUAL44640 x350640 x400640 x480800 x600832 x624852 x4801024 x7681280 x10241366 x76831.46837.86131.46937.92731.46935.00037.86137.50043.26945.91353.01164.06235.15637.87948.07746.87553.67456.00064.01649.72531.46848.36356.47660.02364.00048.387Resolution Horizontal Frequency (KHz)70.0985.0870.0885.0359.9466.6672.8075.0085.0090.03100.04120.0056.2560.3172.1875.0085.0690.00100.0074.5560.0560.0070.0675.0260.0060.00Vertical Frequency (Hz)• Synchronization input form : separate• 852x480 : 42" Native ResolutionHorizontal Polarity is Positive(+)Vertical Polarity is Negative(-)• 1366x768 : 50" Native ResolutionHorizontal Polarity is Positive(+)Vertical Polarity is Negative(-)
Specification OWNER'S MANUAL45Function and S pec ific ation42-inch diagonal screenVariable image aspect ratios (4 modes)16:9 P anoramic mode852 x480 physical pixels1000:1 contrast ratio (Typical)Brightness:700cd/m2P C monitor support up to 1280 x768 60hz181-C hannel C able-R eady TV 2 tuner (NTS C ) / OptionalAdvanced multi-window viewing:P icture-In Picture / Picture on Picture( Small / Large )Multiple input compatibleAdvanced Motion digital processorDeinterlace P rocessorDigital progressive line scalingAudio equalize programmingDigital 3D comb filter (NTS C )P AL/S E C AM TV/C ATV Tuner Module(Optional)C losed Caption decoding (NT S C )Favorite channel programmingC hannel lock/V-chip (NT S C )P rogressive C omponent input with 480i/480P /720P /1080iAutomatic frequency detectionS electable color temp. settings:Warm, C ool, StandardMis cellaneousBuilt-in audio amplifier and two 10W speakers / OptionalS electable Internal/External audio output Quiet fanless operationInput phase clock adjustmentUpgrade Software (via R S -232)Function and S pec ific ation42-inch diagonal screenVariable image aspect ratios (4 modes)16:9 P anoramic mode852 x7480 physical pixels3000:1 contrast ratio (Typical)Brightness:1000cd/m2P C monitor support up to 1280 x768 60hz181-C hannel C able-R eady TV 2 tuner (NTS C) / OptionalAdvanced multi-window viewing:P icture-In Picture / Picture on Picture( Small / Large / Double )Multiple input compatibleAdvanced Motion digital processorDeinterlace P rocessorDigital progressive line scalingAudio equalize programmingDigital 3D comb filter (NTS C )P AL/S E C AM TV/C ATV Tuner Module(Optinal)C losed Caption decoding (NT S C )Favorite channel programmingC hannel lock/V-chip (NT S C )P rogressive C omponent input with 480i/480P /720P /1080iAutomatic frequency detectionS electable color temp. settings:Warm, C ool, StandardMis cellaneousBuilt-in audio amplifier and two 10W speakers / OptionalS electable Internal/External audio outputQuiet fanless operationInput phase clock adjustmentUpgrade Software(via R S -232)iPT-42S1A (V2) iPT-42S2A (V3)
Specification OWNER'S MANUAL46Connectivity:Composite: Input RCA-pin x1, Out RCA-Pin x 1Component video signal : YPbPr x2 ( DVD/DTV )S-video : Mini DIN 4-pin x1DTV input : RCA Pin Y Pb Pr x1(480p, 720p, 1080i)Audio input : RCA-pin Type(L/R)x 6 :Full support seperatedaudio input/output for each Video input/outputSpeaker output : Cinch Conn Type(L/R) x1(4inch connectorstype)Audio system : StereoControl Ports : RS-232 DVI input : OptionalAccessoriesFull function remote control / ManualFedestal stand Shielded Cable / RCA Cable x 1Dimensions : (W xHxD) unit : Inch40.8" x 25" x 3.4" (Main only)40.8" x 27.9" x 11.8" (With stand, without Speaker)Weight:79.41lb(Main only)94.81lb (With stand, without Speaker)Working EnviromentPower : AC 110~240V, 50/60HzPower Consumption : 380 WattsTemperationOperation : 0oc~40oc(32oF~95oF)Storage : -15oc~60oc(5oF~140oF)HuminityOperation : 20~70%Storage : 20~80%PressureOperation : 800~1114hPaStorage : 600~1114hPaConnectivity:Composite:Input RCA-pinx1, Out RCA-Pin x 1Component video signal : YPbPr x2 ( DVD/DTV )S-video : Mini DIN 4-pin x1DTV input : RCA Pin Y Pb Pr x1(480p, 720p, 1080i)Audio input : RCA-pin Type(L/R)x6 :Full support seperatedaudio input/output for each Video input/outputSpeaker output : Cinch Conn Type(L/R) x1(4inch connectorstype)Audio system : StereoControl Ports : RS-232 DVI input : OptionalAccessoriesFull function remote control / ManualFedestal stand lShielded Cable / RCA Cable x 1 ( Optional )Dimensions : (W xHxD) unit : mm---Weight:--Working EnviromentPower : AC 110~240V, 50/60HzPower Consumption : 380 WattsTemperationOperation : 0oc~35oc(32oF~90oF)Storage : -15oc~60oc(5oF~140oF)HuminityOperation : 20~70%Storage : 20~80%PressureOperation : 800~1114hPaStorage : 600~1114hPaiPT-42S1A (V2) iPT-42S2A (V3)
TroubleshootingOWNER'S MANUAL47Before you call a service technician, please scan this list of problems and possible solutions. It may saveyou time and money. No picture & No soundPicture OK & No soundThe remote control doesn't workNo or poor color or poor pictureThe image is too light or too darkThe image is too large or too smallNo output from one of the speakersStrange sound from the MonitorCheck whether the Monitor is turned on.Power cord inserted into wall outletPlug another product’s power cord into the wall outlet wherethe Monitor’s power cord was plugged in.Press the VOLUME( ) button.Check the audio input signal.Check to see if there is any object between the PlasmaDisplay and the remote control causing obstruction.Check to see if the batteries are installed with the correctpolarities.Select Color in the Picture and press VOLUME ( ) button.Keep a certain distance between the Monitor and the VCR.Activate any function to restore the brightness of the picture.Check to see that both the monitor and the source areplugged in and turned on.Adjust the Brightness or Contrast settings.Adjust the Size settings.Adjust Balance in the Sound Menu.Typical sound due to normal Monitor operation, Monitor is notfaulty.Problem Quick Action for Possible Solution
Warranty CardOWNER'S MANUAL48iDisplay.TV Corp. (Techview brand)Limited 1 Year WarrantyiDisplay.TV Corp.(Techview brand) hereby warrants, subject to the conditions herein stated in the paragraphs below, that should this product become defective by reason of improper workmanship or material defect during the specified warranty period, iDisplay.TV Corp.(Techview brand), at its option, will repair (on-site service will be provided where available) or refund the same, effecting all necessary parts replacements, without charge for either parts or labor.Warranty Period:iDisplay.TV Corp.(Techview brand), warrants that from the date of purchase, this product will be free from defects in material for a period of one (1) year and a period of (1) year on labor. iDisplay.TV Corp.(Techview brand)., at its option, will repair (on-site service will be provided where available) or refund this product found to be defective during the warranty period. If the product is no longer available, iDisplay.TV Corp.(Techview brand), may refund your purchase, with original proof of purchase.Conditions:This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty service and/or refund. iDisplay.TV Corp.(Techview brand), dealers, service centers, or retail stores selling iDisplay.TV Corp.(Techview brand), products do not have the right to alter, modify or in any way change the terms and conditions of this warranty.This warranty does not cover normal wear of parts or damage resulting from any of the following: Negligent use or misuse of the product; Improper voltage or current; Use contrary to the operating instructions; Deviation from instructions regarding storage and transportation; Disassembly; Repair or alteration by anyone other than iDisplay.TV Corp. or a iDisplay.TV Corp.(Techview brand), authorized service center. Further, the warranty does not cover Acts of God, such as fire, flood, hurricanes and tornadoes.iDisplay.TV Corp.(Techview brand) shall not be liable for any incidental or consequential damages caused by the breach of any express or implied warranty. Except to the extent prohibited by applicable law, any implied warranty of merchantability or fitness for a particular purpose is limited in duration to the duration of the above warranty. Some states, provinces or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or province to province. How to Obtain Warranty ServiceYou must contact iDisplay.TV Corp.(Techview brand), Customer Service/Technical Support at our toll-free number 1-866-334-8324 (TECH) or by service@idisplay.tv. A Customer Service/Technical Support representative will attempt to resolve warranty issues over the phone. If telephone resolution is not possible, the Customer Service/Technical Support representative will require your assistance in performing routine diagnostic procedures.iDisplay.TV Corp.(Techview brand) Quality Control Department/Customer Service Department5690 Stewart Ave.Fremont, CA 94538U.S.A.ITEM # 70109TMTMTMTMTMTMTMTMTMTMTMTM
MemoOWNER'S MANUAL 49
MemoOWNER'S MANUAL50

Navigation menu