Techsan I and C PT4200U PDP Monitor User Manual Helios NTSC Luce pdf

Download:
Mirror Download [FCC.gov]
Document ID	388815
Application ID	kTfp2fV0ykfQccMr/FOEzQ==
Document Description	User Manual 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	260.46kB (3255755 bits)
Date Submitted	2004-01-14 00:00:00
Date Available	2004-01-13 00:00:00
Creation Date	2003-07-03 15:26:07
Producing Software	Acrobat Distiller 4.0 for Macintosh
Document Lastmod	2003-12-30 16:29:25
Document Title	*Helios NTSC(Luce)pdf
Document Creator	QuarkXPress3.3k: LaserWriter 8 KH-8.7.1
Document Author:	005

PICTURE (TV & VIDEO)
MANUAL PROGRAM
Press VOL(◀/▶) button ,
you can select.
Use the number buttons to directly select the channel
that will be added or erased
Press VOL(◀/▶) button channel select
Press CH( ▲/▼ ) button ADD/ERASE
Repeatedly pressing this button VOL(◀/▶) will
alternate between “ADD’ and “ERASE”
After all the available channel are stored , the menu
press to exit
ADD/ERASE
FINE TUNING
Press VOL(◀/▶) button ,
you can select.
Use the number buttons to directly select the channel
tuning
After all the available channel are stored , the menu
press to exit
34
OWNER'S MANUAL
PICTURE (TV & VIDEO)
LNA
Press VOL(◀/▶) button On/Off
you can select.
If the TV is operation in a weak-signal area , sometimes the LNA
Function can improve the reception ( a low-noise preamplifier the
Incoming signal)
After all the available channel are stored , the menu press to exit
CAPTION
The captions are usually subtitles for the hearing impaired or
Foreign language translations
Press VOL(◀/▶) button on/off , you can select.
Caption ON
Not all programs and videos offer closed caption.
Please look for
The “CC” symbol to ensure that captions will be shown
MODE
Press VOL(◀/▶) button on/off , you can select
FIELD
Press VOL(◀/▶) button 1/2 , you can select
CHANNEL
Press VOL(◀/▶) button 1/2 , you can select
NOTE
All VCRs record the closed caption signal from television programs,
so home-recorded video tapes also provide closed captions. Most
pre-recorder commercial video tapes provide closed captions as well
The caption feature does not work with DVD or DTV signals
OWNER'S MANUAL
35
PICTURE (TV & VIDEO)
V-CHIP
Press VOL(◀/▶) button , you can select.
The V-CHIP feature automatically locks out programs that are
deemed inappropriate for children. The user must enter PIN
(personal ID number) before any of the V-CHIP restrictions are set
up or changed
CHANGE PIN
The message “ Enter Pin” will appear. Enter your 4-digit PIN
number
Note: The default PIN number of a new TV set is “ 0-0-0-0”
The change pin screen will appear. Choose any 4-digits for your
PIN and enter them.
As soon as the 4 digits are entered, the “ Confirm New Pin” screen
appears. Re-enter the same 4 digits. When the Confirm screen
disappears, your PIN has been memorized
Press the MENU button to exit
How to Enable/Disable the V-Chip
Press VOL (◀/▶) button , you can select
The message “ENTER PIN” will appear. Enter your 4-digit Pin
number
Press the MENU button exit
V-CHIP FUNCTION
Push V-Chip button to activate V-Chip function menu.
Input 4digit password(factory default password : 0000)
And follow the directions.
V-CHIP MAIN
INPUT PASSWORD
Press VOL (◀/▶) button , you can select
36
OWNER'S MANUAL
0000
▶
MPAA
Press SET
TV GUIDELINE
Press SET
PASSWORD
Press SET
PICTURE (TV & VIDEO)
MPAA RATING
Select the block level.
you can change the ‘SHOW’, ‘BLOCK’
by using ◀ ▶ keys.
INPUT PASSWORD
PG
PG-13
NC-17
SHOW
SHOW
SHOW
SHOW
SHOW
SHOW
General audiences. All ages admitted.
Parental guidance suggested. Some material may not be suitable for children.
Parents strongly cautioned. Some material may be inappropriate for children under 13.
Restricted. Under 17 requires accompanying parent or adult guardian
No one 17 and under admitted.
A rating that has now been superseded by NC-17.
TV GUIDELINE
Select the TV guideline.
you can change the ‘SHOW’, ‘BLOCK’
by using ◀ ▶ keys.
TV GUIDELINE
TV-Y
TVY7
TV-G
TV-PG
TV-14
TV-MA
SHOW
SHOW
SHOW
SHOW
SHOW
SHOW
Young children
Children 7 and over
General audience
Parental guidance
Viewers 14 and over
Mature audience
BLOCK CONTENT
(TV GUIDELINE ▶ CONTENT)
You can change the ‘SHOW’, ‘BLOCK’
by using ◀ ▶ keys.
BLOCK CONTENT
FV
SHOW
SHOW
SHOW
SHOW
SHOW
Dialog
Sexual situation
Violence
Fantasy violence
Note : The V-Chip will automatically block certain categories that are “more restrictive”. For example,
if you block “TV-Y” category, then TV-Y7 will automatically be blocked. Similarly, if you block the TV-G category,
then all the categories in the “young adult” group will be blocked (TV-G, TV-PG, TV-14 and TV-MA).
The sub-ratings (D, L, S, V) work together similarly. (See next section.)
OWNER'S MANUAL
37
PICTURE (TV & VIDEO & PC)
FUNCTION
Adjust the ASOECT RATIO, INFORMATION, KEY LOCK,
PIXEL SHIFT, PROTECTION, AUTO POWER DOWN and
IMAGE ADJUST on OSD menu.
ASPECT RATIO
Press VOL(◀/▶) button WIDE/NORMAL/ZOOM1ZOOM2,
you can select.
INFORMATION
Press VOL(◀/▶) button ,you can select.
KEY LOCK
Press VOL(◀/▶) button ON/OFF , you can select.
PIXEL SHIFT
Press VOL(◀/▶) button ON/OFF , you can select.
38
OWNER'S MANUAL
PICTURE (TV & VIDEO & PC)
PROTECTION
Press VOL(◀/▶) button ON/OFF , you can select.
The Picture remove after image
AUTO POWER DOWN
Press VOL(◀/▶) button ON/OFF , you can select.
power by decreasing picture brightness.
IMAGE ADJUST
Press VOL(◀/▶) button , you can select.
You can see below picture.
Move where you want to adjust.
AUTO ADJUST
Press VOL(◀/▶) button , you can select.
Automatically adjust picture position and eliminate
any image shaking.
H-POSITION
Press VOL(◀/▶) button , you can select.
Adjust the horizontal size of display.
Only available when you are in PC/HD input mode.
OWNER'S MANUAL
39
PICTURE (PC & VIDEO)
V-POSITION
Press VOL(◀/▶) button , you can select.
Moving the center of display image.
After selecting Position menu, you can move the
image using
FREQUENCY
Press VOL(◀/▶) button , you can select.
Adjust the horizontal size of display.
Only available when you are in PC/HD
input mode
PHASE
Press VOL(◀/▶) button , you can select.
Fine tuning of display accuracy on the screen. Only
available when you are in PC/HD input mode.
TIME
Setting the clock.
CLOCK
Press VOL(◀/▶) button or CH( ▲/▼ ) select
Move the left or right to select hour, then move the remocon
VOL(◀/▶) button or CH( ▲/▼ ) to select the correct hour
ON TIME
Press VOL(◀/▶) button , you are select
You can set the Plasma TV to turn on and off at the times
you specify
40
OWNER'S MANUAL
PICTURE (TV & VIDEO)
TIME
Press VOL(◀/▶) button , you are select
Move the left or right to select hour, then move the remocon
VOL(◀/▶) button or CH( ▲/▼ ) to select the correct hour
CHANNEL
Press VOL(◀/▶) button , you are select
The preferred channel can be set for when the timer automatically
the TV
VOLUME
Press VOL(◀/▶) button , you are select
The preferred VOLUME can be set for when the timer automatically
the TV
OFF TIME
Press VOL(◀/▶) button , you are select
You can set the Plasma TV to turn OFF and off at the times
you specify
SLEEP TIME
Press VOL(◀/▶) button , you are select
Select your desirable setting time to turn off the TV
automatically. 30 min, 60 min, 90 min, 180 min, 240min and
“Off” can be selected. The timer will start to count down just
after you select.
OWNER'S MANUAL
41
Hot Key Function By Remote Control
• ON/OFF
Power on/off
• MUTE
To turn off the sound
• 100
Press this button first for cable channels
over 100
• INFO
You can see information regarding the
channel that you select
• PRE CH
Go back to previous TV channel
• STILL
Pause function, press once again for reset.
• SLEEP
TV off time setting, push button for 30
min, 60 min, 90 min, 180 min, 240min
• TV / VIDEO
Select the signal source from multiple
input source of TV, AV1, S-Video, DTV ,
DVD, PC. DVI
•Menu/Set
Activate the OSD window, enter the sub-menu
or EXIT
•CH+ / CH-
Change the TV channel on TV mode up or down
•VOL+ / VOL-
Change the audio level, increase or decrease
42
OWNER'S MANUAL
Hot Key Function By Remote Control
• PICTUERE
STANDARD
The Picture mode feature allows you to choose
three different modes of picture settings
• SOUND
The sound mode feature allows you to choose
four different modes of sound settings
WARM
• COLOR TEMP
Select the color temperature of screen
image from Warm, Cool and Normal
• ASPECT
WIDE
Change the image size setting, ie;
WIDE/NOMARL/ZOOM1.ZOOM2, etc.
• PC AUTO
NORMAL
Automatically adjust picture position and eliminate
any image shaking.
• CAPTION
Control the caption decoder
• MTS
Control Stereo/Mono setting
• PROTECTION
The Picture remove after image
• PIP ON/OFF
PIP mode On/Off
• SOURCE
Change the video input source of the sub-picture
when PIP is turned on
• SIZE
Change the sub-picture size large/small/double
• SWAP
Swaps the picture and the sub-picture
• CH SCAN
The sub-picture channel scan ( TV source )
• CH UP/DOWN
The sub-picture channel up/down
• LOCATION
Move the sub-picture within the screen
OWNER'S MANUAL
43
Compatible Display Monitor Specification
Resolution
Horizontal Frequency (KHz)
Vertical Frequency (Hz)
31.468
70.09
37.861
85.08
31.469
70.08
37.927
85.03
31.469
59.94
35.000
66.66
37.861
72.80
37.500
75.00
43.269
85.00
45.913
90.03
53.011
100.04
64.062
120.00
35.156
56.25
37.879
60.31
48.077
72.18
46.875
75.00
53.674
85.06
56.000
90.00
640 x 350
640 x 400
640 x 480
800 x 600
64.016
100.00
832 x 624
49.725
74.55
852 x 480
31.468
60.05
48.363
60.00
56.476
70.06
1024 x 768
60.023
75.02
1280 x 1024
64.000
60.00
1366 x 768
48.387
60.00
• Synchronization input form : separate
• 852x480 : 42" Native Resolution
Horizontal Polarity is Positive(+)
Vertical Polarity is Negative(-)
• 1366x768 : 50" Native Resolution
Horizontal Polarity is Positive(+)
Vertical Polarity is Negative(-)
OWNER'S MANUAL
44
Specification
iPT-42S2A (V3)
iPT-42S1A (V2)
Function and S pecification
Function and S pecification
42-inch diagonal screen
42-inch diagonal screen
Variable image aspect ratios (4 modes)
Variable image aspect ratios (4 modes)
16:9 Panoramic mode
16:9 Panoramic mode
852 x 480 physical pixels
852 x 7480 physical pixels
1000:1 contrast ratio (Typical)
3000:1 contrast ratio (Typical)
Brightness:700cd/m
Brightness:1000cd/m2
PC monitor support up to 1280 x768 60hz
PC monitor support up to 1280 x768 60hz
181-C hannel C able-R eady TV 2 tuner (NTS C ) / Optional
181-C hannel C able-R eady TV 2 tuner (NTS C ) / Optional
Advanced multi-window viewing:
Advanced multi-window viewing:
Picture-In Picture / Picture on Picture
Picture-In Picture / Picture on Picture
( Small / Large )
( Small / Large / Double )
Multiple input compatible
Multiple input compatible
Advanced Motion digital processor
Advanced Motion digital processor
Deinterlace Processor
Deinterlace Processor
Digital progressive line scaling
Digital progressive line scaling
Audio equalize programming
Audio equalize programming
Digital 3D comb filter (NTS C )
Digital 3D comb filter (NTS C )
PAL/S E C AM TV/C ATV Tuner Module(Optional)
PAL/S E C AM TV/C ATV Tuner Module(Optinal)
C losed C aption decoding (NTS C )
C losed C aption decoding (NTS C )
Favorite channel programming
Favorite channel programming
C hannel lock/V-chip (NTS C )
C hannel lock/V-chip (NTS C )
Progressive C omponent input with 480i/480P/720P/1080i
Progressive C omponent input with 480i/480P/720P/1080i
Automatic frequency detection
Automatic frequency detection
S electable color temp. settings:Warm, C ool, Standard
S electable color temp. settings:Warm, C ool, Standard
Mis cellaneous
Mis cellaneous
Built-in audio amplifier and two 10W speakers / Optional
Built-in audio amplifier and two 10W speakers / Optional
S electable Internal/External audio output
S electable Internal/External audio output
Quiet fanless operation
Quiet fanless operation
Input phase clock adjustment
Input phase clock adjustment
Upgrade Software (via R S -232)
Upgrade Software(via R S -232)
OWNER'S MANUAL
45
Specification
iPT-42S1A (V2)
iPT-42S2A (V3)
Connectivity:
Connectivity:
Composite: Input RCA-pin x 1, Out RCA-Pin x 1
Composite:Input RCA-pinx1, Out RCA-Pin x 1
Component video signal : YPbPr x2 ( DVD/DTV )
Component video signal : YPbPr x2 ( DVD/DTV )
S-video : Mini DIN 4-pin x 1
S-video : Mini DIN 4-pin x 1
DTV input : RCA Pin Y Pb Pr x 1(480p, 720p, 1080i)
DTV input : RCA Pin Y Pb Pr x 1(480p, 720p, 1080i)
Audio input : RCA-pin Type(L/R) x 6 :Full support seperated
Audio input : RCA-pin Type(L/R) x6 :Full support seperated
audio input/output for each Video input/output
audio input/output for each Video input/output
Speaker output : Cinch Conn Type(L/R) x 1(4inch connectors
Speaker output : Cinch Conn Type(L/R) x 1(4inch connectors
type)
type)
Audio system : Stereo
Audio system : Stereo
Control Ports : RS-232
Control Ports : RS-232
DVI input : Optional
DVI input : Optional
Accessories
Accessories
Full function remote control / Manual
Full function remote control / Manual
Fedestal stand
Fedestal stand l
Shielded Cable / RCA Cable x 1
Shielded Cable / RCA Cable x 1 ( Optional )
Dimensions : (W x H x D)
unit : Inch
Dimensions : (W x H x D)
40.8" x 25" x 3.4" (Main only)
40.8" x 27.9" x 11.8" (With stand, without Speaker)
Weight:
Weight:
79.41lb(Main only)
94.81lb (With stand, without Speaker)
Working Enviroment
Working Enviroment
Power : AC 110~240V, 50/60Hz
Power : AC 110~240V, 50/60Hz
Power Consumption : 380 Watts
Power Consumption : 380 Watts
Temperation
Temperation
Operation : 0 c~40 c(32 F~95 F)
Operation : 0 oc~35 oc(32 oF~90 oF)
Storage : -15 oc~60 oc(5 oF~140 oF)
Storage : -15 oc~60 oc(5 oF~140 oF)
Huminity
Huminity
Operation : 20~70%
Operation : 20~70%
Storage : 20~80%
Storage : 20~80%
Pressure
46
Pressure
Operation : 800~1114hPa
Operation : 800~1114hPa
Storage : 600~1114hPa
Storage : 600~1114hPa
OWNER'S MANUAL
unit : mm
Troubleshooting
Before you call a service technician, please scan this list of problems and possible solutions. It may save
you time and money.
Problem
No picture & No sound
Quick Action for Possible Solution
Check whether the Monitor is turned on.
Power cord inserted into wall outlet
Plug another product’s power cord into the wall outlet where
the Monitor’s power cord was plugged in.
Picture OK & No sound
Press the VOLUME( ) button.
Check the audio input signal.
The remote control doesn't work
Check to see if there is any object between the Plasma
Display and the remote control causing obstruction.
Check to see if the batteries are installed with the correct
polarities.
No or poor color or poor picture
Select Color in the Picture and press VOLUME ( ) button.
Keep a certain distance between the Monitor and the VCR.
Activate any function to restore the brightness of the picture.
Check to see that both the monitor and the source are
plugged in and turned on.
The image is too light or too dark
Adjust the Brightness or Contrast settings.
The image is too large or too small
Adjust the Size settings.
No output from one of the speakers
Adjust Balance in the Sound Menu.
Strange sound from the Monitor
Typical sound due to normal Monitor operation, Monitor is not
faulty.
OWNER'S MANUAL
47
Warranty Card
iDisplay.TV Corp. (TechviewTMbrand)
Limited 1 Year Warranty
iDisplay.TV Corp.(Techview brand) hereby warrants, subject to the conditions herein stated in the
paragraphs below, that should this product become defective by reason of improper workmanship or
material defect during the specified warranty period, iDisplay.TV Corp.(TechviewTMbrand), at its option,
will repair (on-site service will be provided where available) or refund the same, effecting all necessary
parts replacements, without charge for either parts or labor.
TM
Warranty Period:
iDisplay.TV Corp.(Techview brand), warrants that from the date of purchase, this product will be free
from defects in material for a period of one (1) year and a period of (1) year on labor. iDisplay.TV
Corp.(TechviewTMbrand)., at its option, will repair (on-site service will be provided where available) or
refund this product found to be defective during the warranty period. If the product is no longer
available, iDisplay.TV Corp.(TechviewTM brand), may refund your purchase, with original proof of
purchase.
TM
Conditions:
This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not
transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty service
TM
and/or refund. iDisplay.TV Corp.(Techview brand), dealers, service centers, or retail stores selling
TM
iDisplay.TV Corp.(Techview brand), products do not have the right to alter, modify or in any way change
the terms and conditions of this warranty.
This warranty does not cover normal wear of parts or damage resulting from any of the following:
Negligent use or misuse of the product; Improper voltage or current; Use contrary to the operating
instructions; Deviation from instructions regarding storage and transportation; Disassembly; Repair or
alteration by anyone other than iDisplay.TV Corp. or a iDisplay.TV Corp.(TechviewTM brand), authorized
service center. Further, the warranty does not cover Acts of God, such as fire, flood, hurricanes and
tornadoes.
iDisplay.TV Corp.(Techview brand) shall not be liable for any incidental or consequential damages
caused by the breach of any express or implied warranty. Except to the extent prohibited by applicable
law, any implied warranty of merchantability or fitness for a particular purpose is limited in duration to the
duration of the above warranty. Some states, provinces or jurisdictions do not allow the exclusion or
limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so
the above limitations or exclusion may not apply to you. This warranty gives you specific legal rights,
and you may also have other rights that vary from state to state or province to province.
TM
How to Obtain Warranty Service
TM
You must contact iDisplay.TV Corp.(Techview brand), Customer Service/Technical Support at our tollfree number 1-866-334-8324 (TECH) or by service@idisplay.tv.
A Customer Service/Technical Support representative will attempt to resolve warranty issues over the
phone. If telephone resolution is not possible, the Customer Service/Technical Support representative
will require your assistance in performing routine diagnostic procedures.
iDisplay.TV Corp.(TechviewTMbrand)
Quality Control Department/
Customer Service Department
5690 Stewart Ave.
Fremont, CA 94538
U.S.A.
48
OWNER'S MANUAL
ITEM # 70109
Memo
OWNER'S MANUAL
49
Memo
50
OWNER'S MANUAL

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 17
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:04620d0b-7b18-4250-b1a2-b699df150e4c
Producer                        : Acrobat Distiller 4.0 for Macintosh
Create Date                     : 2003:07:03 15:26:07Z
Modify Date                     : 2003:12:30 16:29:25+09:00
Metadata Date                   : 2003:12:30 16:29:25+09:00
Creator Tool                    : QuarkXPress3.3k: LaserWriter 8 KH-8.7.1
Document ID                     : uuid:135a2346-d46e-4d2e-ae41-711e52c0d529
Format                          : application/pdf
Creator                         : 005
Title                           : *Helios NTSC(Luce)pdf
Author                          : 005

EXIF Metadata provided by EXIF.tools