User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 480253 |
| Application ID | BeHO7YwybCNF1wzYgzh8SQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 19.06kB (238289 bits) |
| Date Submitted | 2004-10-19 00:00:00 |
| Date Available | 2004-10-19 00:00:00 |
| Creation Date | 2004-07-26 15:59:14 |
| Producing Software | Acrobat Distiller 6.0 (Windows) |
| Document Lastmod | 2004-10-01 13:56:25 |
| Document Title | Microsoft Word - 2004-07-23 Quick Setup Reference Guide Rev03 for Cordles… |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | Frank Lin |
2.4GHz Cordless EKT User Manual TECOM CO., LTD. 23, R&D ROAD 2, SBIP HSIN-CHU, TAIWAN, ROC PHONE: +886-3-577-5141 FAX: +886-3-579-7196 Revision and Amendment Records Revision # 01 02 03 Description 1. Preliminary Manual 1. Add New Function Setting --- Auto Pick up and Release Call. (Item-5 and 6 of Section-III) 2. Add Extra Function (Section-IV) 1. Modify the Auto Pick Up and Release Call. (Item-5 and 6 of Section-III) 2. Modify the Sleep Mode Status. (Item-5 of Section-IV) Subject: Quick System Setup and Reference Guide for Cordless DK Telephone System Author: SOHO Department, CPE R&D Division, TECOM Email: ytli@tecom.com.tw Date Mar. 29, 2004 May. 31, 2004 Jul. 23, 2004 Date: Jul. 23, 2004 Revision: 03 Page:2/26 TECOM CO., LTD. 23, R&D ROAD 2, SBIP HSIN-CHU, TAIWAN, ROC PHONE: +886-3-577-5141 FAX: +886-3-579-7196 Table of Content I. Introduction........................................................................................... 4 II. System Installation .............................................................................. 6 1. Easy Installation .......................................................................................................................6 2. De-Registration Programming by the Base ...........................................................................8 III. Programming Setting (Handset)...................................................... 13 1. Language Selection Programming........................................................................................13 2. Registration Programming....................................................................................................14 3. De-Registration Programming by the Handset ...................................................................16 4. Vibration Programming ........................................................................................................17 5. Auto Pick Up Programming ..................................................................................................19 6. Release Call Programming....................................................................................................20 7. Reset Handset Programming ................................................................................................21 IV. Extra Function Information............................................................. 23 1. Low Battery Power Status .....................................................................................................23 2. Out Of Range Status ..............................................................................................................23 3. No Link to Base Status...........................................................................................................24 4. Ring and Vibrator Status.......................................................................................................24 5. Sleeping Mode Status .............................................................................................................25 6. Key Lock Mode Status ...........................................................................................................25 7. Power On/Off Mode Status ...................................................................................................26 Subject: Quick System Setup and Reference Guide for Cordless DK Telephone System Author: SOHO Department, CPE R&D Division, TECOM Email: ytli@tecom.com.tw Date: Jul. 23, 2004 Revision: 03 Page:3/26 TECOM CO., LTD. 23, R&D ROAD 2, SBIP HSIN-CHU, TAIWAN, ROC PHONE: +886-3-577-5141 FAX: +886-3-579-7196 I. Introduction The cordless DK EKT system must connect to the Tecom DK System. It will provide powerful and convenient cordless function for business user. There are 2 EKT lines from KSU to the base in the cordless system. If the handset ID is #1, it means the handset is connected to the Line#1. If the handset ID is #2, it means the handset is connected to the Line#2. The system also provides simply setup function to install the cordless system easily. User just presses and holds the [F1] key over 1 second. The system will automatically enter the System Programming mode. It will allow users to set up the system and more friendly function. And, the LCD will display: >LANGUAGE REGISTRATION When user enters the [System Programming Mode], all [Soft keys] will be changed the following programming function key: [F1] key: [F2] key: [F3] key: [Hold] key: [DOWN] key. [UP] key. [OK] key. [EXIT] key. User can use the above programming function keys to set up your powerful cordless system. There are 3 different LED flash cadence for user’s reference. (1) Normal Operation: LED Flash [Normally]: 500ms on, 500ms off, repeatedly. In normal mode, users can make/receive a cal by the handset unit through the base unit. (2) Base is in transition mode: LED Flash [Slowly]: 1000ms on, 1000ms off, repeatedly. In the transition mode, user is changing the DIP switches status. The system will wait for 5 Subject: Quick System Setup and Reference Guide for Cordless DK Telephone System Author: SOHO Department, CPE R&D Division, TECOM Email: ytli@tecom.com.tw Date: Jul. 23, 2004 Revision: 03 Page:4/26 TECOM CO., LTD. 23, R&D ROAD 2, SBIP HSIN-CHU, TAIWAN, ROC PHONE: +886-3-577-5141 FAX: +886-3-579-7196 II. System Installation 1. Easy Installation The [Registration] programming will allow handset user to register the handset to the base unit. (1) First of all, enter the registration mode on the base unit. (2) And then, select the handset is in the registration mode, too. (3) Move the handset near the base. (4) The system will automatically register the handset and assign the handset ID. Operation Procedure: (1) First of all, enter the registration mode on the base unit. Turn on the DIP SWITCH-1 and turns off the other 2 switches. After 5 second, the system will enter the registration mode. (It means: Switch-1 is OFF, Switch-2 and 3 are ON) ON Note: The LED on the base will flash [Fast] when enter the registration mode. (2) If the handset was never registered, the LCD will display the following message. PLEASE REGISTER! Or, press and hold the [F1] key over 1 second to enter the System Programming mode. The LCD will display: Subject: Quick System Setup and Reference Guide for Cordless DK Telephone System Author: SOHO Department, CPE R&D Division, TECOM Email: ytli@tecom.com.tw Date: Jul. 23, 2004 Revision: 03 Page:6/26 TECOM CO., LTD. 23, R&D ROAD 2, SBIP HSIN-CHU, TAIWAN, ROC PHONE: +886-3-577-5141 FAX: +886-3-579-7196 >LANGUAGE REGISTRATION And then, press [F1] or [F2] to select registration mode. >REGISTRATION DE-REGISTER And then, press [OK] key to enter registration mode, the LCD will display: REGISTRATION NO? Press [F1/F2] key to select the [YES?] mode. REGISTRATION YES? You can select [YES] to register, or [NO] to exit this mode. Press [F3] (the same as [OK] key) to confirm, the LCD will display: (e.g. [YES]) REGISTERING... PLEASE WAIT! (3) Move the handset near the base. The system will start to register with the base unit. If the registration operation is successful, the LCD will display: Subject: Quick System Setup and Reference Guide for Cordless DK Telephone System Author: SOHO Department, CPE R&D Division, TECOM Email: ytli@tecom.com.tw Date: Jul. 23, 2004 Revision: 03 Page:7/26 TECOM CO., LTD. 23, R&D ROAD 2, SBIP HSIN-CHU, TAIWAN, ROC PHONE: +886-3-577-5141 FAX: +886-3-579-7196 REGISTERED HANDSET #1 Note: 1. There are 2 EKT lines from KSU to the base. 2. If the handset ID is #1 means the handset is connect to the Line#1. If the handset ID is #2 means the handset is connect to the Line#2. (4) If the registration function fails, the LCD will display: FAILED! TRY AGAIN! Note: If user wants to register again, he can follow the above procedure to re-register to base unit. (6) Finally, change the DIP SWITCH on the base changes to normal mode. (It means: Switch-1, 2, and 3 are OFF) ON Note: 1. The LED on the base will flash [Normally] when the unit comes back to normal mode. 2. About the Programming mode, please refer to the part of the programming mode for further detail. 2. De-Registration Programming by the Base If user wants to de-register all handsets or remove one handset only, user can de-registration the handset by the base unit. But, the handset unit must be moved to near the base to receive de-registration command from base unit. After de-registration, the handset unit won’t link with the Subject: Quick System Setup and Reference Guide for Cordless DK Telephone System Author: SOHO Department, CPE R&D Division, TECOM Email: ytli@tecom.com.tw Date: Jul. 23, 2004 Revision: 03 Page:8/26 TECOM CO., LTD. 23, R&D ROAD 2, SBIP HSIN-CHU, TAIWAN, ROC PHONE: +886-3-577-5141 FAX: +886-3-579-7196 base any more. There are 2 ways to de-register the handset unit. Operation Procedure for Method-A (Using the base only): (1) De-register all handsets Turn on the DIP SWITCH-1, SWITCH-2, and turn off the SWITCH-3. ON After 5 second, the system will de-register all handsets. Note: The LED on the base will flash [Fast] when enter the de-registration mode. (2) De-register Handset #1 Turn on the DIP SWITCH-3, and turn off the SWITCH-1, SWITCH-2. ON After 5 second, the system will de-register handset #1. Note: The LED on the base will flash [Fast] when enter the de-registration mode. (3) De-register Handset #2 Turn on the DIP SWITCH-2, SWITCH-3, and turn off the SWITCH-1. ON After 5 second, the system will de-register handset #2. Subject: Quick System Setup and Reference Guide for Cordless DK Telephone System Author: SOHO Department, CPE R&D Division, TECOM Email: ytli@tecom.com.tw Date: Jul. 23, 2004 Revision: 03 Page:9/26 TECOM CO., LTD. 23, R&D ROAD 2, SBIP HSIN-CHU, TAIWAN, ROC PHONE: +886-3-577-5141 FAX: +886-3-579-7196 Note: The LED on the base will flash [Fast] when enter the de-registration mode. (4) Finally, change the DIP SWITCH on the base changes to normal mode. (All switches are OFF) ON Note: The LED on the base will flash [Normally] when the unit comes back to normal mode. Operation Procedure for Method-B (Using the base and handset): (1) The base is in the idle mode. (2) The handset is in standby, press and hold the [F1] key over 1 second to enter [PROGRAM MODE] and then select the corresponding item (De-register Mode), the LCD will display: (( )) >DE-REGISTER VIBRATION Press [F3] (the same as [OK] key) to enter the mode, the LCD will display: (( )) DE-REGISTER NO? Press [F1/F2] key to select the [YES?] mode. (( )) DE-REGISTER YES? Subject: Quick System Setup and Reference Guide for Cordless DK Telephone System Author: SOHO Department, CPE R&D Division, TECOM Email: ytli@tecom.com.tw Date: Jul. 23, 2004 Revision: 03 Page:10/26 TECOM CO., LTD. 23, R&D ROAD 2, SBIP HSIN-CHU, TAIWAN, ROC PHONE: +886-3-577-5141 FAX: +886-3-579-7196 You can select [YES] to de-register, or [NO] to exit this mode. Press [F3] (the same as [OK] key) to confirm, the LCD will display: (e.g. [YES]) (( )) DE-REGISTERING. PLEASE WAIT! If the de-registration is successful, the LCD will display: (( )) DE-REGISTER OK! If the de-registration fails after about 20-30 seconds, the Handset LCD will display: (( )) FAILED! TRY AGAIN! Note: 1. Using the method-A or B, the system must be in idle mode. 2. Using the method-A, a) If base can’t link to handset, the handset still will be de-registered. b) If base de-registers one handset only and the handset doesn’t receive de-registration command from base, the handset will still link with base unit. But it can’t use the system. 3. Using the method-B, a) The base doesn’t need to enter the de-registration mode. b) The handset unit must be moved to near the base to receive de-registration command from base unit. c) Only one handset can de-register to the base at a time. 4. After de-registration, the handset LCD will display: Subject: Quick System Setup and Reference Guide for Cordless DK Telephone System Author: SOHO Department, CPE R&D Division, TECOM Email: ytli@tecom.com.tw Date: Jul. 23, 2004 Revision: 03 Page:11/26 TECOM CO., LTD. 23, R&D ROAD 2, SBIP HSIN-CHU, TAIWAN, ROC PHONE: +886-3-577-5141 FAX: +886-3-579-7196 PLEASE REGISTER! 5. About the De-Register, please refer to the part of the programming mode for further detail. Subject: Quick System Setup and Reference Guide for Cordless DK Telephone System Author: SOHO Department, CPE R&D Division, TECOM Email: ytli@tecom.com.tw Date: Jul. 23, 2004 Revision: 03 Page:12/26 TECOM CO., LTD. 23, R&D ROAD 2, SBIP HSIN-CHU, TAIWAN, ROC PHONE: +886-3-577-5141 FAX: +886-3-579-7196 III. Programming Setting (Handset) The system provides programming mode to set up more friendly features. When user enters the [System Programming Mode], all [Soft keys] will be changed the following function key: [F1] key: [F2] key: [F3] key: [Hold] key: [DOWN] [UP] [OK] [EXIT] Operation Procedure: First of all, in the standby mode, press and hold the [F1] key over 1 second to enter the System Programming mode, the LCD will display: (( )) >LANGUAGE REGISTRATION And then, user can start to set up extra features for the cordless handset. 1. Language Selection Programming The [Language Selection] programming will provide 3 different languages for all users. There are: English, French, and Spanish. Default: English. Standby, press and hold the [F1] key over 1 second to enter the System Programming mode, the LCD will display: (( )) >LANGUAGE REGISTRATION Subject: Quick System Setup and Reference Guide for Cordless DK Telephone System Author: SOHO Department, CPE R&D Division, TECOM Email: ytli@tecom.com.tw Date: Jul. 23, 2004 Revision: 03 Page:13/26 TECOM CO., LTD. 23, R&D ROAD 2, SBIP HSIN-CHU, TAIWAN, ROC PHONE: +886-3-577-5141 FAX: +886-3-579-7196 Press [F3] (the same as [OK] key) to enter the change mode, the LCD will display: (( )) LANGUAGE ENGLISH Press [F1] key to change the item. (Or, [F1/ F2] to select the other language) (( )) LANGUAGE FRENCH Press [F3] (the same as [OK] key) to confirm, the unit will generate the confirmation beep. The LCD will display: (( )) LANGUAGE FRENCH OK! After 3 seconds, the LCD will come back the upper level to program the other items. (All programming items will have this same function) The LCD will display: (( )) >LANGUAGE REGISTRATION Note: 1. If the setting is successful, the unit will generate the confirmation beep and display [OK!] for user’s reference. 2. The tri-lingual display is for the row-1of the LCD display only. The row-2 and row-3 display will be the same as the KSU Setting. 3. The other setting items also have confirmation beep and [OK!] indication. 2. Registration Programming Subject: Quick System Setup and Reference Guide for Cordless DK Telephone System Author: SOHO Department, CPE R&D Division, TECOM Email: ytli@tecom.com.tw Date: Jul. 23, 2004 Revision: 03 Page:14/26 TECOM CO., LTD. 23, R&D ROAD 2, SBIP HSIN-CHU, TAIWAN, ROC PHONE: +886-3-577-5141 FAX: +886-3-579-7196 The [Registration] programming will allow handset user registers to the base unit. Use can enter programming mode, the LCD will display: (( )) >LANGUAGE REGISTRATION Select the corresponding item (Registration mode), the LCD will display: (( )) >REGISTRATION DE-REGISTER And then press [OK] key to enter registration mode, the LCD will display: (( )) REGISTRATION NO? Press [F1/F2] key to select the [YES?] mode. (( )) REGISTRATION YES? You can select [YES] to register, or [NO] to exit this mode. Press [F3] (the same as [OK] key) to confirm, the LCD will display: (e.g. [YES]) REGISTERING... PLEASE WAIT! If the registration operation is successful, the LCD will display: Subject: Quick System Setup and Reference Guide for Cordless DK Telephone System Author: SOHO Department, CPE R&D Division, TECOM Email: ytli@tecom.com.tw Date: Jul. 23, 2004 Revision: 03 Page:15/26 TECOM CO., LTD. 23, R&D ROAD 2, SBIP HSIN-CHU, TAIWAN, ROC PHONE: +886-3-577-5141 FAX: +886-3-579-7196 REGISTERED HANDSET #1 Note: You can refer to the part of System Installation for further detail. 3. De-Registration Programming by the Handset If user doesn’t use the handset any more or wants to register the handset to the other base, it may be necessary to cancel the registration to original base. Only one handset can de-register to the base at a time. And please make sure the system is not being used and the handset must near the base unit. Standby, press and hold the [F1] key over 1 second to enter [PROGRAM MODE] and then select the corresponding item, the LCD will display: (( )) >DE-REGISTER VIBRATION Press [F3] (the same as [OK] key) to enter the mode, the LCD will display: (( )) DE-REGISTER NO? Press [F1/F2] key to select the [YES?] mode. (( )) DE-REGISTER YES? You can select [YES] to de-register, or [NO] to exit this mode. Subject: Quick System Setup and Reference Guide for Cordless DK Telephone System Author: SOHO Department, CPE R&D Division, TECOM Email: ytli@tecom.com.tw Date: Jul. 23, 2004 Revision: 03 Page:16/26 TECOM CO., LTD. 23, R&D ROAD 2, SBIP HSIN-CHU, TAIWAN, ROC PHONE: +886-3-577-5141 FAX: +886-3-579-7196 Press [F3] (the same as [OK] key) to confirm, the LCD will display: (e.g. [YES]) (( )) DE-REGISTERING. PLEASE WAIT! If the de-registration is successful, the LCD will display: (( )) DE-REGISTER OK! If the de-registration fails after about 20-30 seconds, the Handset LCD will display: (( )) FAILED! TRY AGAIN! Note: 1. The base doesn’t need to enter the de-registration mode. And, the system must be in idle mode. 2. Only one handset can de-register to the base at a time. 3. The handset can register to the other base without de-registration to the original base. But the original base will keep the handset information forever. 4. About the registration operation, please check Registration or Installation section. 4. Vibration Programming There are 3 modes for [Vibration] programming mode. The select item: RING, VIBRATOR, RING + VIB. Default: RING. Standby, press and hold the [F1] key over 1 second to enter the [PROGRAM MODE] and then select the corresponding item. The LCD will display: Subject: Quick System Setup and Reference Guide for Cordless DK Telephone System Author: SOHO Department, CPE R&D Division, TECOM Email: ytli@tecom.com.tw Date: Jul. 23, 2004 Revision: 03 Page:17/26 TECOM CO., LTD. 23, R&D ROAD 2, SBIP HSIN-CHU, TAIWAN, ROC PHONE: +886-3-577-5141 FAX: +886-3-579-7196 (( )) >VIBRATION AUTO PICK UP Press [F3] (the same as [OK] key) to enter the change mode, the LCD will display: (( )) VIBRATION √RING √VIBRATOR Press [F1/F2] key to change the item. VIBRATION √RING VIBRATOR Press [F3] (the same as [OK] key) to confirm, the LCD will display: (Select [Ring] mode only) VIBRATION √RING If user selects [Ring and Vibrator] mode, it will display both ring and vibrator icons on the LCD. (( )) VIBRATION √RING √VIBRATOR Note: 1. The unit will generate the reference ring or/and vibration for the user to refer the ring type. 2. The mark [√] means that user enables this function. 3. There are some icons (( )) on the row-1. It will indicate user’s setting. Ring and/or Vibration. 4. Press [F1] key, the change sequence is [RING => VIBRATOR => RING + VIB => RING Subject: Quick System Setup and Reference Guide for Cordless DK Telephone System Author: SOHO Department, CPE R&D Division, TECOM Email: ytli@tecom.com.tw Date: Jul. 23, 2004 Revision: 03 Page:18/26 TECOM CO., LTD. 23, R&D ROAD 2, SBIP HSIN-CHU, TAIWAN, ROC PHONE: +886-3-577-5141 FAX: +886-3-579-7196 => …]. And, if press [F2] key, the change sequence is [RING + VIB => VIBRATOR => RING => RING + VIB => …… ]. 5. Auto Pick Up Programming The [Auto Pick Up] Programming will allow user to pick up the phone call by receiver or handsfree mode when user lifts the handset from cradle. There are 3 modes for [Auto Pick Up] programming mode. The select item: RECEIVER, HANDSFREE, and DISABLE. Default: RECEIVER. Standby, press and hold the [F1] key over 1 second to enter the [PROGRAM MODE] and then select the corresponding item, the LCD will display: (( )) >AUTO PICK UP RELEASE CALL Press [F3] (the same as [OK] key) to enter the change mode, the LCD will display: (( )) AUTO PICK UP RECEIVER Press [F1/F2] key to change the item. (( )) AUTO PICK UP HANDSFREE Or (( )) AUTO PICK UP DISABLE Subject: Quick System Setup and Reference Guide for Cordless DK Telephone System Author: SOHO Department, CPE R&D Division, TECOM Email: ytli@tecom.com.tw Date: Jul. 23, 2004 Revision: 03 Page:19/26 TECOM CO., LTD. 23, R&D ROAD 2, SBIP HSIN-CHU, TAIWAN, ROC PHONE: +886-3-577-5141 FAX: +886-3-579-7196 Press [F3] (the same as [OK] key) to confirm, the LCD will display: (Select [Handsfree] mode) (( )) AUTO PICK UP HANDSFREE OK! 6. Release Call Programming The [Release Call] Programming will let user can programmable release the phone call in speakerphone mode by TALK key or SPEAKER key. There are 2 modes for [Release Call] programming mode. The select item: [BY TALK KEY] and [BY SPKR KEY]. Default: [BY TALK KEY] Standby, press and hold the [F1] key over 1 second to enter the [PROGRAM MODE] and then select the corresponding item, the LCD will display: (( )) >RELEASE CALL RESET HANDSET Press [F3] (the same as [OK] key) to enter the change mode, the LCD will display: (( )) RELEASE CALL BY TALK KEY Press [F1/F2] key to change the item. RELEASE CALL BY SPKR KEY Subject: Quick System Setup and Reference Guide for Cordless DK Telephone System Author: SOHO Department, CPE R&D Division, TECOM Email: ytli@tecom.com.tw Date: Jul. 23, 2004 Revision: 03 Page:20/26 TECOM CO., LTD. 23, R&D ROAD 2, SBIP HSIN-CHU, TAIWAN, ROC PHONE: +886-3-577-5141 FAX: +886-3-579-7196 Press [F3] (the same as [OK] key) to confirm, the LCD will display: (Select [SPKR] mode) AUTO PICK UP BY SPKR KEY OK! 7. Reset Handset Programming The [Reset] Programming will reset the handset unit back to the default status. Standby, press and hold the [F1] key over 1 second to enter the [PROGRAM MODE] and then select the corresponding item, the LCD will display: (( )) >RESET HANDSET LANGUAGE Press [F3] (the same as [OK] key) to enter the mode, the LCD will display: (( )) RESET HANDSET NO? Press [F1/F2] key to select the [YES?] mode. (( )) RESET HANDSET YES? You can select [YES] to reset, or [NO] to exit this mode. Press [F3] (the same as [OK] key) to confirm, the LCD will display: (e.g. [YES]) Subject: Quick System Setup and Reference Guide for Cordless DK Telephone System Author: SOHO Department, CPE R&D Division, TECOM Email: ytli@tecom.com.tw Date: Jul. 23, 2004 Revision: 03 Page:21/26 TECOM CO., LTD. 23, R&D ROAD 2, SBIP HSIN-CHU, TAIWAN, ROC PHONE: +886-3-577-5141 FAX: +886-3-579-7196 (( )) RESETTING... PLEASE WAIT! After 3 seconds, the handset comes back to the default status. And, the LCD will display the following message for 5 – 10 seconds. INITIALIZING... PLEASE WAIT! And then, display the current status: (( )) Note: If the handset never register to the base or has been reset, the LCD will also display: PLEASE REGISTER! Subject: Quick System Setup and Reference Guide for Cordless DK Telephone System Author: SOHO Department, CPE R&D Division, TECOM Email: ytli@tecom.com.tw Date: Jul. 23, 2004 Revision: 03 Page:22/26 TECOM CO., LTD. 23, R&D ROAD 2, SBIP HSIN-CHU, TAIWAN, ROC PHONE: +886-3-577-5141 FAX: +886-3-579-7196 IV. Extra Function Information The cordless system will provide more information for RF Link status and Battery Power status. User can easily find the current handset status about the RF Link and Batter status. Note: 1. All new information about RF and Battery status will be displayed on the row-1 of the LCD. 2. The row-2 and 3 of the LCD display won’t be affected. 1. Low Battery Power Status The handset will display battery power status icon on the upper right corner of the LCD. If the battery power is too low to work, the unit will also display [LOW BATTERY] character before the battery is out of power completely. LOW BATTERY If the handset is not in the standby mode, the icon would be flashing at the cadence of 0.5 sec on-and-off repeatedly when the battery power is too low. However, it can’t flash when low battery and in standby mode. If the handset is in the talk mode, the unit will also generate the warning beep for user’s reference per 15 seconds. 2. Out Of Range Status If the handset is in the talk mode and user goes far away from the base, the handset will display [OUT OF RANGE] and generate the warning beep per 5 seconds. The LCD will display: OUT OF RANGE Subject: Quick System Setup and Reference Guide for Cordless DK Telephone System Author: SOHO Department, CPE R&D Division, TECOM Email: ytli@tecom.com.tw Date: Jul. 23, 2004 Revision: 03 Page:23/26 TECOM CO., LTD. 23, R&D ROAD 2, SBIP HSIN-CHU, TAIWAN, ROC PHONE: +886-3-577-5141 FAX: +886-3-579-7196 User must come back to near the base, or the call will be dropped within 30 seconds. 3. No Link to Base Status If the handset is put far away from the base or the power of the base unit is removed, the handset will display [NO LINK TO BASE] to indicate the handset can’t link with the base. Of course, the row-2 and row-3 of the LCD won’t receive information from base. So, it will be blank on the row-2 and row-3. NO LINK TO BASE User must come back to near the base, or check the base power status. User also can re-register the handset to make sure the registration status. 4. Ring and Vibrator Status If user sets [Ring mode] only, it will only display [Ring] icon only on the LCD. If user selects [Vibrator mode] only, it will display vibrator icon only on the LCD. (( )) If user selects [Ring and Vibrator mode], it will display both ring and vibrator icons on the LCD. (( )) Subject: Quick System Setup and Reference Guide for Cordless DK Telephone System Author: SOHO Department, CPE R&D Division, TECOM Email: ytli@tecom.com.tw Date: Jul. 23, 2004 Revision: 03 Page:24/26 TECOM CO., LTD. 23, R&D ROAD 2, SBIP HSIN-CHU, TAIWAN, ROC PHONE: +886-3-577-5141 FAX: +886-3-579-7196 5. Sleeping Mode Status For power saving issue, the handset will enter sleeping mode automatically when there is no special event in the system. The row-3 of the LCD will display handset extension number for user’s reference. But the row-2 will be blank to extend standby time. (( )) EXT 10 User can simply press any key to wake up the unit. And, if the handset receives any special information from base, the unit will also wake up automatically. Note: If the handset in sleeping mode, the LED will be not turn on. 6. Key Lock Mode Status If user presses and hold [Flash] key over 2 second, the handset will be in key locked/unlock mode. When handset in the key unlocked mode (normal mode) and long keypress [Flash], the unit will enter the lock mode automatically. And, the LCD will display 3 seconds as follows to indicate how to unlock the mode: LONG KEY PRESS [FLASH] TO UNLOCK After 3 seconds, The LCD will display: (( )) Subject: Quick System Setup and Reference Guide for Cordless DK Telephone System Author: SOHO Department, CPE R&D Division, TECOM Email: ytli@tecom.com.tw Date: Jul. 23, 2004 Revision: 03 Page:25/26 TECOM CO., LTD. 23, R&D ROAD 2, SBIP HSIN-CHU, TAIWAN, ROC PHONE: +886-3-577-5141 FAX: +886-3-579-7196 When handset in the key locked mode and long keypress [Flash], The LCD will display 3 seconds as follows: TO UNLOCK? PRESS [F3] If user presses the key [F3] within 3 seconds, the handset will be key unlock. Note: The [Flash] key will be changed to [TRANSFER] key in some models. So, LCD will display when user presses [TRANSFER] for 2 seconds: LONG KEY PRESS [TRANSFER] TO UNLOCK 7. Power On/Off Mode Status When handset in the power on mode, you can long keypress [Hold] over 2 second, the handset will be turn off the power. The LCD will display 3 seconds as follows: POWER OFF When handset in the power off mode, you can long keypress [Hold] over 2 second, the handset will be turn on the power. The LCD will display 3 seconds as follows: POWER ON ------ END -----Subject: Quick System Setup and Reference Guide for Cordless DK Telephone System Author: SOHO Department, CPE R&D Division, TECOM Email: ytli@tecom.com.tw Date: Jul. 23, 2004 Revision: 03 Page:26/26
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Modify Date : 2004:10:01 13:56:25+08:00 Create Date : 2004:07:26 15:59:14+08:00 Page Count : 26 Has XFA : No About : uuid:5d423b5e-0470-40d5-8db4-24f0cc3408d8 Producer : Acrobat Distiller 6.0 (Windows) Mod Date : 2004:10:01 13:56:25+08:00 Creation Date : 2004:07:26 15:59:14+08:00 Author : Frank Lin Creator Tool : PScript5.dll Version 5.2 Metadata Date : 2004:10:01 13:56:25+08:00 Document ID : uuid:da8a5826-90e1-4e8c-90d7-4907c23c6bfd Format : application/pdf Title : Microsoft Word - 2004-07-23 Quick Setup Reference Guide Rev03 for Cordles… Creator : Frank LinEXIF Metadata provided by EXIF.tools