Tecom Co BT3034 Bluetooth USB Dongle User Manual BT3034 User Guide

Tecom Co Ltd Bluetooth USB Dongle BT3034 User Guide

User Manual

gModel Name: BT3034 User Guide January 2002 ©2002 by TECOM CO,. LTD. All rights reserved. Printed in Taiwan BLUETOOTH is a trademark owned by Bluetooth SIG., U.S.A. and licensed to TECOM Co., Ltd. All Brand names and trademarks are the p roperty of their resp ective owners
Product Fe ature s The BT3034 BluetoothTM USB Do ngle is co mplia nt with Blue tooth sta nd ard to ass ist you to enjoy the wireless data connectivity experience among different Bluetooth enabled devices such as desktop & notebook PC, printer, or PDA. The product provides the following features: ● Compliant with Bluetooth Specification V.1.1 ● USB bus-powered; an external power supply is not required ● Supports device drivers for: Microsoft Windows 98SE, Microsoft Windows ME, Microsoft Windows 2000, Windows XP ● Supports 20 dBm (Class 1) Output Power; operating distance up to 100 meters ● Supports many user-friendly application profiles for LAN access, files transfer, dial-up networking, and data synchronization between devices etc. ● Supports data rates up to 723 Kbps Product Quick Installation Guide ● Check Product Contents ● Insert Software Installation CD to install software ● Plug in BT3034 to your computers USB port to install driver ● Configuring the application parameters ● Enjoy the Bluetooth connectivity 
● 1 Quick Installation Guide ● 1 Bluetooth USB Dongle ● 1 CD-ROM for Installation Software & Documentation ● 1 USB extension cable System Requireme nt To run the software properly, please make sure your Desktop PC or Notebook PC meets the following requirements: ● Hardware: Pentium Class PC, CPU speed 200 MHz or above ● RAM: 128MB or above ● USB port, supports USB 1.1 standard ● Operating System: Windows 98SE, or Windows Me, or Windows 2000, or Windows XP. Software Setup & Driver Installation To install the Bluetooth Software for Windows, follow the instructions described below: Note: When installing under Windows XP, the installation process might be a slightly different in from installing under Windows 98SE, ME, and 2000. 1. Before software installation, do not insert Bluetooth USB Dongle into the USB port. 2. Insert the Software Installation CD-Rom into the CD-Rom drive. 3. A Software Installation Wizard window appears, click on Next to begin the process.
4. Choose “ I accept the terms in the license agreement” to accept the license agreement; click on Next.
6. Specify the location of the driver & software to be installed; click on Next.
8. Confirm the completion of installation; click Finis h and then start the system.
qy This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accep t any interference received, including interference that may cause undesired operation. IMPO RTANT NO TE: 1. TO COM PLY WITH THE FCC RF EXPOSURE COMPLIANCE REQUIREM ENTS, A SEPARATION DISTANCE OF AT LEAST 20CM MUST BE M AINTAINED BETWEEN THE ANTENNA OF THIS DEVICE AND ALL PERSONS. NO CHANGE TO THE ANTENNA OR THE DEVICE IS PERMITTED. ANY CHANGE TO THE ANTENNA OR THE DEVICE COULD RESULT IN THE DEVICE EXCEEDING T HE RF EXPOSURE REQUIREMENTS AND VOID USER’S AUTHORITY TO OPERATE THIS DEVICE. 2. THE CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COM PLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE T HE EQUIPM ENT. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. T hese limits are designed t o p rovide reasonable p rotect ion against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruct ions, may cause harmful interference t o radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does not cause harmful interference to radio or television recep tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the int erference by one or more of the following measures: (1) Reorient or relocat e the receiving antenna, (2) Increase the separation between the equip ment and receiver, (3) Connect the equipment into an outlet on a\circuit different from that to which the receiver is connected, (4) Consult the dealer or an experienced radio/TV technician for help. De partment of Communications-Canada Canadian Compliance State ment This Class B Digital apparatus meets all the requirements of the Canadian Interference Causing Equipment Regulations. Cet app areil numerique de la classe B resp ect les exigencies du Reglement sur le material broilleur du Canada. This device comp lies with Class B Limits of Industry of Canada. Operation is subject to the following two conditions: 1) this device may not cause harmful int erference, and 2) t his device must accep t any interference received, including interference that may cause undesired operation. This device is certified to the requirements of RSS-139-1 and RSS-210 for 2.4 GHz spread spectrum devices. The use of this device in a system operating ether partially or completely outdoors may require the user to obtain a license for the syst em according to the Canadian regulations. For further information, contact local Industry Canada office.
For the following equipment: Product Name: Bluetooth USB Dongle Model Name: BT3034 Is herewith confirmed to comply with the requirements set out in the Council Directive on the Ap proximation of the Laws of the Member States relating to 1999/5/EC R&TTE Directive. For the evaluation regarding the Directives, the following standards were applied: ETSI 300
FROM: _______________________________ _______________________________ PLEASE STAMP TO: TECOM Co,. LTD IMSD 23, R&D Road 2, Science-Based Indus Hsin-Chu 300 Taiwan
,gpy(),y()ygof purchase, completed and returned the Registration Card which accompanied the products when ship ped, (2) return the failed product to TECOM designated repair facility with shipping charge prepaid, and (3) provide TECOM with proof of the original date of purchase. Repaired or replacement products will be returned to you with shipping charges p repaid. Replacement products may be refurbished or contain refurbished materials. If TECOM by its sole determination, is unable to repair or replace the defective product, it will refund the depreciated purchase price of the product. This warranty does not apply if, in the judgment of TECOM, the product fails due to damage from shipment, handling, storage, accident, abuse or misuse, or if it has been used or maintained in a manner not conforming to product manual instructio ns, has been mo dified in any way, or has had any serial number removed or defected. Repair by anyone other than TEC O M or an approved agent will void this wa rranty. The maximum liability of TEC O M under this warranty is limited to the purchase rice o f the prod uct covered by the warranty. Prior to returning any defective product, the end customer or the reseller from whom the end customer original purchased the product must obtain a Return Materials Authorization (RMA) number from TECOM. All defective products should be returned to TECOM with shipping charges prepaid. Except as specifically provided in this statement or as required by law, the warranties and remedies stated above are exclusive and in lieu of all others, oral or written, e xpres s or implied. Any and all othe r warrantie s, including implied warrantie s of merchantability, fitness for a particular purpose and non-infringement of third party rights are e xpressly e xcluded. TECOM s hall not unde r any circumstances be liable to any person for any special, incidental, indirect or consequential damages, including without or revenues or costs of replacement goods, even if TECOM is informed in advance of the possibility of such damages.
Name: __________________________________________________________ Title: ____________________________________________________________ Company Name: __________________________________________________ Address (1): ______________________________________________________ Address (2): ______________________________________________________ Telephone: _______________________________________________________ E-mail : _________________________________________ _________________ Purchase Date: ____________________________________________________ Where did you purchased the product? ____ Mail order ____ Reseller/VAR ____ Retail Store ____ Internet Reseller Name: ___________________________________________________ Reseller Address __________________________________________________ Telephone: _______________________________________________________ Fax: _____________________________________________________________ What PC will this TECOM product be used? ____ Desktop PC ____ Notebook PC Where will the product primarily be used? ____ Home ____ Office ____ Personal Use ** P LEASE ATTACH A PHOTOCOP Y OF RECIPE T OF ORIGINAL P URCH ASE ! **
10. Choose “Specify the location of the driver (advanced)”; then click on Next. 11. Select the location of device driver, please specify “C:\Program Files \Widcomm\Bluetooth S oftware\b in\”, click on Next.
12. Confirm the device driver found; click on Next.
14. A “My Bluetooth Places” icon appears on the desktop. Note: More detailed explanations and the operation of each Bluetooth services can be found in Use r’s M anual in the CD-ROM. My Bluetooth Places icon appears on the
items, Security and Configuration , of Setup option. 2. Click on “Configuration”, the “General” Section of Bluetooth Configuration allows you to customize the device’s user name, type, and security type. 3. The “Acc essibility” Section allows you to specify which individual devices are allow to access to the user’s device. M ore de taile d e xplanations and the operation of e ach Bluetooth s ervices can be found in User’s Manual in the CD-ROM.
To use the “My Bluetooth Places” program, follow the instructions described below: 1. Click “ My Bluetooth Places” on PC desktop, the “My Bluetooth Places” window appears, three icons, “My Device” , “Entire Bluetooth Ne ighborhood” & “Add Blue tooth Connection” appears inside the window. 2. Click My Device from the “Bluetooth Neighborhood” window to see which application services is available to the other devices. The icon with “ X” or without “ X” indicates the Bluetooth service availability o f this device. 3. Click on Entire Bluetooth Ne ighborhood from the “My Bluetooth Places” window to search for available devices. Once Bluetooth devices are detected, icons with device names will be displayed on the screen; click on each icon to see what services are available to you. Click on each available service to begin with the service. 4. Click on any available device, for example, a device name “BT98” from the “My Bluetooth Places” window to see which services are available to you. Double click on each icon to begin with different services .
Overseas Sales Offices Ta i pe i , Ta i wa n China Japan North Ame ri ca Customer and Technical Supporting Centers North Ame ri ca Europe & As ia
No.19-8, 6F San-Chung Road, Nankang District, Taipei, Taiwan Tel: +886-2-2655-1000 Fax: +886-2-2655-1349 E#202 NO.20 Guandondian St. Chaoyang, District, Beijing, China Post Code:100020 Tel: +86 10 65032280~1 Fax: +86 10 6503 2258; E-mail: tecombj@public.bta.net.cn 4F, Marushin Bldg. 1-6-2 Hamamatsucho, Minato-ku, Tokyo, Japan 105-0013 Tel: +81 33435 7817 Fax: +81 33578 8381 TECOM (USA) Group, Inc. Add: 3 Corporate Park, Suite 168, Irvine, Ca. 92606 USA Tel: 1-949-474-1535; Fax: 1-949-474-1539 E-mail:s ales @tec om.com.tw 21902 64th Ave. West #1, Mountlake, Terrace, WA 98043. Tel: (206) 229-9979 E-mail : ytwang@ tecom.com.tw 23 R&D Road 2, Science-Based Industrial Park, Hsin-Chu, Taiwan R.O.C. Tel: +886-3-5775141 Fax: +886-3-5776855 E-mail:s ales @tec om.com.tw

Navigation menu