Teldat CM11B-01 WLAN transmitter module User Manual ar ib CPEmb 05a e
Teldat GmbH WLAN transmitter module ar ib CPEmb 05a e
Teldat >
Users Manual
Information Brief - Artem ComPoint Embedded Information Brief Brief: Publishing Date: Artem ComPoint Embedded Nov. 11, 2004 ar_ib_CPEmb_05_e Funkwerk Enterprise Comms. GmbH Südwestpark. 94 D-90449 Nürnberg, Germany Phone: +49-180-300 91 91-0 Fax: +49-180-300 91 93-0 info@funkwerk-ec.com www.funkwerk-ec.com 2 Information Brief - artem Core Module Content Content....................................................................................................................................................................................................................................................2 General Description ...............................................................................................................................................................................................................................3 Usable CPU Ports ...................................................................................................................................................................................................................................3 Core Module Technical Graphics Block Diagramm..............................................................................................................................................................................................................................4 MiniPCI-Header For Core ..............................................................................................................................................................................................................5 Software Features....................................................................................................................................................................................................................................6 Legal Notices ...........................................................................................................................................................................................................................................7 Contact ....................................................................................................................................................................................................................................................8 Wireless LAN and your health The Artem Wireless LAN products, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by Wireless LAN devices however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones. Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and recommendations, Artem believes Wireless LAN is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. Regulatory information This device must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. For country-specific radio and telecommunications approvals, please consult page 2 of this flyer. In some situations or environments, the use of wireless devices may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include: Using the wireless equipment on board of airplanes, or in any other environment where the risk of interference to other devices or services is perceived or identified as harmful. If you are uncertain of the policy that applies on the use of wireless equipment in a specific organization or environment (e.g. airports), you are encouraged to ask for authorization to use this device prior to turning on the equipment. The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this kit, or the substitution or attachment of connecting cables and equipment other than specified by manufacturer. The correction of interference caused by such unauthorized modification, substitution or attachment will be the responsibility of the user. The manufacturer and its authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from failing to comply with these guidelines. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. When integrating the Module, the following information must be considered: All products containing the module must be labelled. The label must be affixed on an exterior surface of the end product such that it will be visible upon inspection in compliance with the modular approval guidelines developed by the FCC. The label must state "This device contains FCC ID R8G-CM11B-01" In addition, the user manual for the end product must contain the following information: "This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation." Information Brief - artem Core Module General Description The Core Module combines all needed components to build an IEEE 802.11b wireless device. It contains: • Network processor (Ubicom IP2022 @ 120MHz) • IEEE 802.11b radio (Agere Hermes 2 and Penguin) • Clock (4.8MHz crystal, CPU internal PLL to generate 120MHz and 240MHz) • Optional: 32kHz crystal for RTC and sleep mode • Voltage supervisor including debounced reset input • 1 MBit SRAM and 4 MBit Serial Flash for packet buffering and firmware storage • 2.5V LDO • 2 U.FL antenna connectors (Rx/Tx and Rx diversity) The module is designed in the form factor of a MiniPCI Type IIIA card (50.95 x 59.75 x 8 mm (L x W x H)) , however with a proprietary pinout. Please see the MiniPCI standard for mechanical details (MiniPCI Spec Rev. 1.0, Figure 5-7 on page 45). Power consumption: max. 500mA @ 3.3V (avg.: tbd sleep: tbd) Supply voltage: 3.3V +/- 3% Operating temperature: -20 °C .. +70°C Usable CPU Ports Port RA1 RA2 RA3 RB0 RB1 RE4 RE5 RE6 RE7 RG4 RG5 RF0 RF1 RF2 RF3 RG6 RG7 RG0 RG1 RG2 RG3 RF7 AI DI DO Ext. Interput ACOMP Vmax 3.3V 3.3V 3.3V 3.3V 3.3V 3.3V 3.3V 3.3V 3.3V 2.5V 2.5V 3.3V 3.3V 3.3V 3.3V 2.5V 2.5V 2.5V 2.5V 2.5V 2.5V 3.3V Imax 24mA 24mA 24mA 8mA 8mA 8mA 24mA 24mA 8mA 4mA 4mA 8mA 24mA 24mA 8mA 4mA 4mA 4mA 4mA 4mA 4mA 8mA DI / DO DI / DO DI / DO DI / DO / Ext. Interrupt DI / DO / Ext. Interrupt DI / DO DI / DO DI / DO DI / DO AI / DO AI / DO DI / DO DI / DO DI / DO DI / DO AI / DO AI / DO AI / DO / ACOMP Out AI / DO / ACOMP In AI / DO / ACOMP In + AI / DO / ADC Ref In DI / DO Analog Input (ADC, 48kHz, 10bit) Digital Input Digital Output Interupt Input Analog Comparator Assignment SPI SCK (fixed) SPI SI (fixed) SPI SO (fixed) Preferred usage SPI SCK SPI SI SPI SO SPI CS SERDES 1 SERDES 1 SERDES 1 SERDES 1 SERDES 1 SERDES 1 SERDES 2 SERDES 2 SERDES 2 SERDES 2 SERDES 2 SERDES 2 Ethernet 1 Ethernet 1 Ethernet 1 Ethernet 1 Ethernet 1 Ethernet 1 Ethernet 2 / RS232 RTS Ethernet 2 / RS232 TxD Ethernet 2 / RS232 CTS Ethernet 2 Ethernet 2 Ethernet 2 Act. LED 2 Link LED 2 Act. LED 1 & Monitor button Link LED 1 RS232 RxD SERDES 2 4 Information Brief - artem Core Module Software Features Access Point Ethernet Client Ethernet Serial Client Current firmware & version sm_ap V1.40 sm_ac V1.40 sm_sc V1.40 Wireless Network Name Channel Setting 802.11d Support Transmission Rate (auto + fixed) Ad-Hoc Mode Load Balancing AP Distance RTS Threshold (1 - 2347) Microwave robustness Medium Distribution Support DTIM Interval (1 - 65535) Multicast rate PS Multicast Buffering IAPP (ARtem proprietary) WLAN Node Table AP Scan List LAN Node Table yes yes yes yes n/a yes yes yes yes yes yes yes yes yes yes n/a n/a yes yes (Ad-Hoc) yes yes yes yes n/a yes yes yes n/a yes n/a n/a n/a yes yes yes yes (Ad-Hoc) yes yes yes yes n/a yes yes yes n/a yes n/a n/a n/a yes yes MD5 MD5 802.1x Reauthentication Timer RADIUS Client ACL Local Data Encryption MD5, TLS, TTLS, PEAP yes yes yes WEP64/128/Plus Deny Unencrypted Data WPA-Personal (PSK) WPA-Enterprise (802.1x) Radio On/Off AP Visibility (Hide SSID) Inter Traffic Blocking (Repeating) Admin Password Configuration over WLAN Option yes Planned Planned yes yes yes yes yes n/a n/a n/a WEP64/128/Plus TKIP n/a yes Planned yes n/a n/a yes yes n/a n/a n/a WEP64/128/Plus TKIP n/a yes Planned yes n/a n/a yes yes Configuration & Management User-Friendly Web Interface ComPoint Manager - Discovery- & Rollout-Tool Configuration Management API DHCP Client Reboot Reset Configuration Reset All to Factory Default yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes Security 802.1x Authentication Information Brief - artem Core Module Software Features Serial TCP Server TCP Client Transparent Serial Bridge Virtual COM Serial Statistics Baudrate Data Bits (7/8) Parity (None, Even, Odd) Stop Bits (1, 2) Handshake HW (RTS/CTS, DTR/DSR) Handshake SW (XON/XOFF) Frame Send Trigger via Time-Out Frame Send Trigger via Byte Count Frame Send Trigger via Multi-Byte Delimiter Access Point Ethernet Client Ethernet Serial Client n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a yes yes Planned Planned yes 2400 - 230400 yes yes yes yes (only for RS232) Planned yes yes Planned 6 Information Brief - artem Core Module Legal Notices All product names are trade marks of the Funkwer Enterprise Communications GmbH or of the respective owner and will be accepted hereby. All statements are valid at the time of publishing and can be changed without any announcements. ©2004 Funkwer Enterprise Communications GmbH. All rights reserved. Duplications, changes or translations are not allowed without permission of the Funkwer Enterprise Communications GmbH. Contact Address Funkwerk Enterprise Communications GmbH Südwestpark 94 D-90449 Nürnberg, Germany General Phone: +49-180-300 91 91-0 Fax: +49-180-300 91 93-0 eMail: info@funkwerk-ec.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 6 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:b5c9d508-10df-4522-b309-595a33675cd8 Producer : Acrobat Distiller 6.0 (Windows) Create Date : 2004:11:11 09:34:04+01:00 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2004:11:11 10:48:51+01:00 Metadata Date : 2004:11:11 10:48:51+01:00 Document ID : uuid:85ad8d9b-088c-46c7-acdd-4295eb59cef2 Format : application/pdf Title : ar_ib_CPEmb_05a_e.qxd Creator : ama Author : amaEXIF Metadata provided by EXIF.tools