Teleway DFU026 GrooveStikTM Wireless Audio Solution User Manual 2
Teleway Industrial Ltd GrooveStikTM Wireless Audio Solution 2
Teleway >
User manual
Model# DFU026 Battery Spec.: 3.7V / 120mAh Effective Range: above 8M Features: ·Compatible with iPod Touch/iPhone/iPad and other devices that supply Bluetooth stereo audio player. ·Via Bluetooth wireless access mode, it cooperates with iPod Touch/iPhone/iPad or other series that support Bluetooth stereo audio player to realize the long-distance transmission of stereo audio. ·Three different colors of the LED indicators, the Green LED is charging, the Red LED means low battery, the Blue LED means Bluetooth pairing and communication. ·Built-in green lithium-ion polymer battery. ·It can input stereo audio for portable speakers. Contents: 1 × GrooveStik 3.5MM Audio Cable,USB Connector Specifications: Compatible with iPod Touch/iPhone/iPad and other series products that support Bluetooth stereo audio player. Executive Standard: Bluetooth SIG, V3.0 Bluetooth Protocol: Bluetooth serial port profile (SPP) Port Interface: BSPP-USB (DFU026 Type) Communication Speed Rate: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200bps Modulation System: 2.4G ISM direct sequence frequency (FHSS) Operating Temperature/ Storage Temperature: -10-50°C/-20-80°C Transmitting Power/ Receiving Sensitivity: 30mAh/0.6mAh -6- * the Bluetooth is disconnected more than 10 minutes, the device will turn off automatically. 3. Once connected, connect 3.5MM audio cable to Speaker to realize the transmission of stereo audio. 4. Pressing the switch for 3 seconds, the LED indicator flash/off to realize on/off function (when turn on, the blue LED indicator will flash 3 times; turn off, it will be out .) 5. After turn on the device, soft-pressing the switch to realize music play or pause functional. The LED indicator information: 1. The blue LED indicator flashes one time each 5 seconds means that the Bluetooth is disconnected. 2. The blue LED indicator flashes one time each second means that the Bluetooth is connected. Instructions: 1. Charging GrooveStik Open the cap of the GrooveStik, and connect the USB port to any powered USB device. Such as charger (output USB 5V1A, 2.1A), computer, and so on. The green LED indicator will keep lighting when charged. 2. Pair GrooveStik with your device When GrooveStik paring with your device 1st time,please make sure the device is power off. a. Long-pressing the switch for 5 seconds to enter into pairing mode, the LED indicator alternately flashing red and blue. b. Choosing DFU026 from the Bluetooth device list on your iPod Touch/ iPhone/iPad devices screen, and start to do pairing. When you complete to do pairing, the red LED indicator will be out , and blue LED indicator will flash quickly for 5 times, then flash 1 time per second. For the device has successfully paired with GrooveStik, no need to do pairing again. a. Please make sure GrooveStik is in shut down. b. Long-time pressing the switch for 3 seconds, turn on and connect the Bluetooth device that paired last time. Then the blue LED indicator will flash quickly 3 times, then one time each 0.5 second. It will go to standby mode if cannot connect successfully in 30 seconds, the blue LED indicator will flash one time in each 5 seconds. * iPod Touch/iPhone/iPad Bluetooth device can connect 2 pcs at the same time (Bluetooth version above 3.0 ) -7- WARNING! IMPORTANT SAFETY INSTRUCTION! Failure to read and follow these safety instructions could result in fire, explosion, electrical shock or other hazard, causing serious and/ or fatal injury and/or property damage. 1. Do not modify, disassemble, open, drop, crush, puncture or shred the product 2. Do not expose the product to rain or water 3. Keep away from open flame or sunlight to prevent heat build-up 4. Keep away from high voltage devices 5. This product is not a toy, keep away from children. Ensure that all persons who use the product read and follow these warnings and instructions Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 3. The red LED indicator flashes means low battery, need to recharge( or the device will turn off automatically) This device complies with part 15 of the FCC rules. Operation is subject to the following 4. The green LED indicator on means the battery is in charging, The green LED shut down it means charged. (2) this device must accept any interference received, including interference that may two conditions (1) this device may not cause harmful interference, and cause undesired operation. For technical support, please email us for more information at support@dexim.net. -8- -9-
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 1 Create Date : D:20120904101558 Modify Date : D:20120904101558 Producer : Corel PDF Engine Version 1.0.0.525 Author : 微软用户 Creator : CorelDRAW 12.0 版 Title : 图形2EXIF Metadata provided by EXIF.tools