Telrad Networks CPE7000IDU2X DM-CPE7000-Si-2D-1V-WiFi-2.x User Manual
Telrad Networks Ltd DM-CPE7000-Si-2D-1V-WiFi-2.x
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2823376 |
| Application ID | hqvM34PY2U7YQrVcwP7mGw== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 75.36kB (942050 bits) |
| Date Submitted | 2015-11-26 00:00:00 |
| Date Available | 2015-11-27 00:00:00 |
| Creation Date | 2017-09-01 12:35:59 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-09-01 12:35:59 |
| Document Title | User manual |
| Document Author: | ling_young |
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/CANADA Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/CE. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/CE: EN 60950-1：2006＋A11＋A1＋A12＋A2: 2013 EN62311 : 2008 EN 300 328 V1.8.1: 2012 EN 301 489-1 V1.9.2: 2011 EN 301 489-17 V2.2.1: 2012 In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services. Česky [Czech] Dansk [Danish] [Jméno výrobce] tí to prohlašuje, že te to [typ zaříze í] je e shodě se základ í i požada ky a další i přísluš ý i usta o e í i s ěr i e 1999/5/E“. Undertegnede [fabrikantens navn] erklærer herved, at følgende udstyr [udstyrets typebetegnelse] overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. Deutsch [German] Hiermit erklärt [Name des Herstellers], dass sich das Gerät [Gerätetyp] in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet. Eesti [Estonian] Käesolevaga kinnitab [tootja nimi = name of manufacturer] seadme [seadme tüüp = type of equipment] vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele. English Hereby, [name of manufacturer], declares that this [type of equipment] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Español [Spanish] Por medio de la presente [nombre del fabricante] declara que el [clase de equipo] cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. ηνι ή Η Α Ω [Greek] Η Français [French] Α [name of manufacturer] Η Ω ΑΙ Η ΙΑ 1999/5/ Ι ΙΩ Ι Ι Α ΑΙ Η Ι Ι [type of equipment] ΑΙ Ι Ι Ι ΙΑ Α Ι Par la présente [nom du fabricant] déclare que l'appareil [type d'appareil] est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Italiano [Italian] Con la presente [nome del costruttore] dichiara che questo [tipo di apparecchio] è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Latviski [Latvian] Ar šo [name of manufacturer / izgatavotāja osauku s] deklarē, ka [type of equipment / iekārtas tips] at ilst Direktī as 1999/5/EK ūtiskajā saistītajie Κietu ių [Lithuanian] Nederlands [Dutch] prasī ā itie ar to oteiku ie . Šiuo [manufacturer name] deklaruoja, kad šis [equipment type] atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Hierbij verklaart [naam van de fabrikant] dat het toestel [type van toestel] in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Malti [Maltese] Hawnhekk, [isem tal-manifattur], jiddikjara li dan [il-mudel tal-prodott] jikkonforma mal-ħtiġijiet esse zjali u a pro edi e ti oħraj rele a ti li he fid-Dirrettiva 1999/5/EC. Magyar [Hungarian] Polski [Polish] Português [Portuguese] Slovensko [Slovenian] Slovensky [Slovak] Suomi [Finnish] Alulírott, [gyártó neve] nyilatkozom, hogy a [... típus] megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak. Niniejszym [nazwa producenta] oś iad za, że [nazwa wyrobu] jest zgodny z zasadniczymi y oga i oraz pozostały i stoso y i posta o ie ia i Dyrekty y 1999/5/EC. [Nome do fabricante] declara que este [tipo de equipamento] está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE. [Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostali i rele a t i i določili direktive 1999/5/ES. [Meno výrobcu] tý to yhlasuje, že [typ zariadenia] spĺňa základ é požiada ky a šetky prísluš é usta o e ia “ er i e 1999/5/E“. [Valmistaja = manufacturer] vakuuttaa täten että [type of equipment = laitteen tyyppimerkintä] tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen. Industry Canada statement: This de i e o plies ith I dustry Ca ada’s li e e-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes: (1) Ce dispositif ne peut causer d'interférences; et (2) Ce dispositif doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Copyright This DOCUMENT is copyrighted with all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without the written permission of Telnet. Notice Telnet reserves the right to change specifications without prior notice. While the information in this document has been compiled with great care, it may not be deemed an assurance of product characteristics. Telnet shall be liable only to the degree specified in the terms of sale and delivery. The reproduction and distribution of the documentation and software supplied with this product and the use of its contents is subject to written authorization from Telnet CPE7000 Indoor LED Indicators Num. Type Power & Wi-Fi WAN VoIP Logo Color Action Description Blue Solid ON Power on (System is booting , or WiFi is disabled) Purple Solid ON WiFi is enabled Purple Blinking WiFi is transmitting data Blue Blinking LTE is connecting Blue Solid ON LTE is connected Red Blinking WiMAX is connecting Red Solid ON WiMAX is connected Blue Solid ON VoIP Registered Blue Blinking Incoming call ringing Red Solid ON Off-hook/ Busy Red Blinking New incoming call during conversation Purple Blinking Incoming voice mail waiting OFF Signal Strength Green Solid ON VoIP not registered / VoIP disabled Display signal strength 1 LED: 0<=CINR<8 2 LED: 8<=CINR<24 3 LED: 24<=CINR OFF No signal CPE7000 Indoor Connectors: 1. SIM card Slot Cover: Open the cover and insert SIM card into the slot with right direction. 2. Telephone Port (RJ-11): Connect your telephone to Indoor CPE with a RJ-11 telephone cable. 3. LAN Port (RJ-45): Port for connecting PC, hub and switch or other network equipment by RJ-45 Ethernet cable. 4. Reset Butto : Press Reset utto less tha 5 se o ds to re oot the de i e. Or press a d hold the Reset button 10 seconds to set router to factory default settings. 5. WP“ Butto : Press WP“ WPS function. utto , router a easily o e ts to Wi-Fi client which also support 6. USB: Connect USB equipment by standard USB cable 7. Power Adapter Socket (DC-12V): Plug adapter DC pin into this socket. Installation Please follow the steps below to install the device: Step1: Connect the device LAN port to your PC with a RJ-45 Ethernet cable. Step2: Insert SIM card into the device with right direction. Step3: Insert the power cord into the LTE Indoor CPE's DC-12V power jack; and insert the plug into power outlet. Step4: Switch ON the power. The device will start the booting process. After a few seconds, the LED lights will start blinking. Easy Setup Please follow the steps below to configure your device through the web interface: Step1: Open the Web browser (Internet Explorer) and enter the default IP address of the IDU CPE : http://192.168.254.251 Step2: Enter IDU administrator login username/password to access the web management interface. The default username/password is admin/admin. Step3: The page displays in your browser after login; you can simply configure the device settings. Step4: Signal Strength indicator on the upper-left corner of webpage. There are two modes to show different connection status. Mode: LTE or WiMAX Operator: Either APN Name (LTE mode) or BSID (WiMAX mode) Signal: (More bars indicate better signal) (Disconnect, no signal) Wi-Fi Setting Step1: Select WIFI from main menu. Then screen will display the default setting of SSID, radio channel, working mode, WiFi MAC and SSID broadcast. Step2: Specify a radio channel, working mode, bandwidth in Settings page. Step3: Specify a SSID (Service Set ID), SSID broadcast and Security in Multiple SSID page.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract Author : ling_young Create Date : 2015:10:08 09:26:52+08:00 Modify Date : 2015:11:19 11:20:38+08:00 Language : zh-TW Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Creator : ling_young Creator Tool : Microsoft® Office Word 2007 Metadata Date : 2015:11:19 11:20:38+08:00 Producer : Microsoft® Office Word 2007 Document ID : uuid:24aa0eaa-0c41-4b4e-a373-a12aad02209b Instance ID : uuid:5cc715f9-9b00-40e4-a57b-582e448ac870 Page Count : 10EXIF Metadata provided by EXIF.tools