Temco Japan HG40SAN-TBT Bluetooth Stereo Headset User Manual Bluetooth Stereo Headset User Guide V2 0

Download:
Mirror Download [FCC.gov]
Document ID	778416
Application ID	9FtnwAAUIoZO2J0qSSrOaA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	5.37kB (67106 bits)
Date Submitted	2007-04-10 00:00:00
Date Available	2007-04-10 00:00:00
Creation Date	2007-04-10 17:43:44
Producing Software	AFPL Ghostscript 8.54
Document Lastmod	2007-04-10 17:43:44
Document Title	Bluetooth Stereo Headset User Guide V2.0
Document Creator	PDFCreator Version 0.9.2
Document Author:	linsam

Bluetooth Stereo
Headset
User Guide
ISSUE BY:
ISSUE Date:
© 2006 Temco Japan Co., Limited
All rights in this publication are reserved and no part may be reproduced without the
prior written permission of the publisher. The contents of this publication are believed
to be correct at the time of going to press, but any information, specifications,
products or services mentioned may be modified, supplemented or withdrawn
without further notice.
The Stylized TEMCO logos are trademarks owned by Temco Japan Co., Limited or its
affiliates.
Bluetooth® and the Bluetooth logos are trademarks owned by Bluetooth SIG. Inc, USA
and licensed to Temco Japan Co., Limited.
Made by Temco Japan Co., Limited, a wholly-owned subsidiary of Temco Japan Co.,
Limited.
Temco Japan Co., Limited declares under our sole responsibility that this product is in
conformity with the provisions of the following Council Directives 1999/5/EC. Please
dispose of this packaging and product in accordance with the latest guidelines.
Federal Communications Commission (FCC) Statement
15.21
You are cautioned that changes or modifications not expressly approved by the part
responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following two conditions:
1) this device may not cause interference and
2) this device must accept any interference, including interference that may cause
undesired operation of the device.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
Contents
Safety
Instructions.................................................................................................................................
............x
Introduction...............................................................................................................................
.............x
Product
Features
(Bluetooth
Stereo
Headset)........................................................................................x
Product
Features
(Audio
Adapter)..........................................................................................................x
Product
Functions...................................................................................................................................
What’s
included
in
the
Package...................................................................... .......................................x
Description
of
Parts
(Bluetooth
Stereo
Headset)..................................................................................x
Description
of
Parts
(Audio
Adapter)....................................................................................................x
Changing
From
Earpieces
to
Neckband....................................................... .........................................x
Wearing
the
Headset........................................................................... .................................................x
Charging
the
battery..................................................................... ......................................................x
Battery
Information............................. ................................................................................................x
Pairing
Headset
with
Bluetooth
Devices
(Phone,
PDA)........................................................................x
Switching
the
Headset
ON/OFF............................................................................................................x
Using
the
Headset
to
Make
Call............................................. ...........................................................x
Using
the
Headset
to
Answer
Call......................................................................................................x
Using
the
Audio
Adapter
with
Headset.................................................................................................x
Switching
the
Audio
Adapter
ON/OFF...................................................................................................x
Using
Audio
Adapter
with
Headset
for
Stereo
and
Voice
Applications.................................................x
Reconnecting
Audio
Adapter
with
Headset..........................................................................................x
Using
Audio
Adapter
for
Handsfree
with
non-Bluetooth
Phones.........................................................x
Hints
for
Optimum
Audio
Transmission................................................................................................x
Optional
Items......................................................................................................................................x
Frequently
Asked
Questions
(FAQ).......................................................................................................x
Safety Instructions
Never use the Bluetooth Stereo Headset while driving.
Check the laws and regulations on the use of mobile phones in areas you
intend to use.
Continuous listening of music at high volume may cause hearing defects.
Never touch the electric cord or plug with wet hands and never use force to
pull the cord or plug.
When cleaning, do not use any type of abrasive pad, scouring powder or
solvents as these may render the finish dull permanently.
Charge the battery for at least 2 hours before using.
Do not use in places like hospitals, airplanes etc. where use of electronic
devices is prohibited.
Do not expose components to extremes of sunlight, temperature, moisture or
vibrations.
Introduction
Thank you for purchasing our Bluetooth Stereo Headset.
The Bluetooth Stereo Headset is a high quality wireless audio device that provides
users with audio entertainment and voice functions at its best while giving complete
freedom from physical wires. It functions as ‘Wireless Stereo Headphone’ when linked
to Bluetooth-enabled audio devices such as Mobile Phones, MP3 Players and PCs etc
and as ‘ Headset’ with Bluetooth Phones or PC.
For audio devices without Bluetooth functionalities, our unique plug & play Voice
Enabled Audio Adapter can be used. We hope you enjoy the unique wireless
features provided by TEMCO
Product Features (Bluetooth Stereo Headset)
CD Quality Sound And High Quality Voice
Supports A2DP SBC, MP3 For Stereo Audio Streaming
Supports Headset Profiles For Operation With Bluetooth Phones
Detachable Microphone
Detachable Earpiece and Neckband
Compact, Rechargeable, High Density Li-Polymer Battery For Long Lasting Play
Product Features (Audio Adapter)
Only Product Of Its Kind To Support Stereo And Voice Functionality
Simple Plug & Play Function – No Driver Software Installation
Supports A2DP And Headset Audio Gateway
Product Functions
Stereo Headphone for Bluetooth Devices Supporting A2DP
(Advanced Audio Distribution Profile) and non-Bluetooth Devices via Audio Adapter
Handsfree Headset for Bluetooth Phones and Wireless Headset (Stereo and voice) for
PC using Audio Adapter.
What’s included in the Package
Charging the battery
Battery Information
Battery Level Indicator : Battery level can be checked by color of LED. When
battery level is low, LED flashes red every second.
LED color : During charging - Red,
Charging time : < 3hours (Charging time varies with battery level)
Battery Life : Standby > 200hrs, Audio /Voice Connection : >12 hrs
* Because of its consumable nature, battery life cycle gradually degrades over time.
Purchase new battery if battery life has degraded significantly.
* Do not drop battery, subject it to force or disassemble it as it may result in damage
or overheating.
* Do not place battery near burner or microwave oven as it may explode.
* Keep away from the reach of children. Can be harmful when damaged battery is
used or if placed in the mouth.
* When exposed to battery liquid, clean the exposed area under running water for
1-2 minutes.
* Do not use the battery with other devices as it may cause damage.
* Charge battery for at least 2 hours before use.
Battery can also be charged by connecting Headset or Audio Adapter with AC/DC
adapter.
Pairing Headset with Bluetooth Devices (Phone, PDA)
Before pairing the Headset with Bluetooth Devices, please make sure the host
device supports any of the following profiles : A2DP, AVRCP, Headset/Handsfree
profiles.
Click and hold MFB & ON/OFF buttons together for more than 6 seconds. When
LED starts to flash blue alternately, release the buttons. LED will then flash blue
continuously. This pairing mode will last for 1 minute and if no pairing is made within
this period, the Headset will return to standby mode.
Manipulate the buttons or menus of Bluetooth device to complete pairing
(Refer to device’s manual as the instructions may differ from device to device).
Check if Headset or corresponding ‘Bluetooth Address’ is displayed in the list of
searched devices. If device is not found, repeat pairing procedure.
When prompted to enter PINCODE, enter 0000 which is the fixed PINCODE for
Bluetooth Stereo Headset.
The Headset can be paired with up to 10 different devices. Pairing is done just
once and not every time a different device is used.
For pairing of Headset with Audio Adapter, refer to the instructions on page X.
Switching the Headset ON/OFF
To switch ON Headset, click and hold MFB & ON/OFF button for 3-4 seconds
until LED flashes blue rapidly and then release button.
To switch OFF Headset, click and hold MFB & ON/OFF button for 8 seconds then
release button.
15 BLUETOOTH STEREO HEADSET
Using the Headset to Make a Call
Make sure Headset and mobile phone are connected.
To make a call, dial from the mobile phone and when the dial tone is heard,
click MFB once to switch over to Headset. For mobile phones supporting
Handsfree profile, you can dial from mobile phone without having to click MFB.
To end the call, press the MFB once.
Notes: For some phones, the ON/OFF button is used to end the call.
For Bluetooth phones that support Handsfree Profile, clicking the MFB in a long
manner will activate the phone to redial to the last number received or called. For
redialing, the procedures may differ from one device to another. For some
phones, clicking the MFB in a long manner will first activate the phone to display
the list of the last numbers received or called. For others, clicking the MFB in a long
manner will redial to the last number received or called directly.
Using the Headset to Answer a Call
On an incoming call, bell will ring from Headset and mobile phone. Call can
be answered from phone automotive.
To disconnect the call, press MFB once. For mobile phones supporting only
headset profile, the ON/OFF button may be used to disconnect.
If the other party ends the call first, Headset will automatically enter into
standby mode without the user having to press ON/OFF button to end the call.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 11
Producer                        : AFPL Ghostscript 8.54
Create Date                     : 2007:04:10 17:43:44+08:00
Modify Date                     : 2007:04:10 17:43:44+08:00
Title                           : Bluetooth Stereo Headset User Guide V2.0
Creator                         : PDFCreator Version 0.9.2
Author                          : linsam

EXIF Metadata provided by EXIF.tools