Temco Japan SG01 Bluetooth Sunglasses User Manual SG01

Download:
Mirror Download [FCC.gov]
Document ID	1443091
Application ID	XDYFomXLE4qxJ8fIrqlDOg==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	31.15kB (389380 bits)
Date Submitted	2011-04-04 00:00:00
Date Available	2011-04-04 00:00:00
Creation Date	2011-03-28 06:28:30
Producing Software	Mac OS X 10.5.8 Quartz PDFContext
Document Lastmod	2011-03-28 06:28:30
Document Title	SG01 User Manual
Document Creator	Microsoft Word
Document Author:	yimi

BONE CONDUCTION HEADSET
SUNGLASSES TYPE OWNER’S
MANUAL SG01
●Thank you for purchasing our product.
●Please review this “OWNER’S MANUAL” carefully before
using this product.
●Please keep this manual available for quick reference.
Safety Instructions
● Review this “Safety Instructions” before using the product for safe
and correct usage.
● All of the following contains important safety instructions and must
be strictly followed.
● Descriptions of sign and terminology are as follows.
〈Terminology〉
Warning
Caution
Wrong usage may cause serious or fatal injury to people.
Wrong usage could result in injury.
〈Sign〉
Prohibited
What not to do.
Explicit description is given or attached to the sign.
Compulsory
Action/instructions which must be followed.
Explicit description is given by or attached to the sign.
Caution
indicates matter requiring special attention.
Explicit description is given by or attached to the sign.
WARNING
Prohibited
DO NOT disassemble or modify the product. Such act may
cause malfunction, electric shock or fire.
Prohibited
If anything unusual such as smoke, heat or bad smell is
detected, immediately disconnect the power and stop the
usage. Continued use may cause electric shock or fire.
Prohibited
DO NOT throw the product into the fire. Built-in battery may
explode.
CAUTION
Prohibited
DO NOT expose the product to heavy rain. Such condition
may cause malfunction.
Prohibited
DO NOT expose the product to open flame or under the
direct sunlight for a prolonged period of time. Such environment may cause malfunction or fire.
Caution
Caution
DO NOT drop or apply shock to the product. Such act may
cause irreparable damage to the product.
DO NOT lick, bite or put the product into the mouth. Such
act may result in serious injuries/accidents. Take utmost
caution around children.
Kit Checklist
Ensure that the package contains all of the following.
●Sunglasses
One
●USB Charge Cable
One
●Glass wiper
One
●Case
One
●Owner’s Manual One
Parts
②Microphone
⑤Indicator（Blue）
⑧USB Charge Cable
⑥Indicator（Red）
①Bone Conduction Speakerr
⑦Charge jack
③Volume control button
④Power/Pairing button
⑩Modern (pads)
⑨Charge plug
Before Using the Product
Charge the headset using the attached USB Chage Cable⑧.
Insert the charge plug ⑨ of the USB Charge cable to the charge jack
⑦ of the sunglasses.
The indicator ⑥ turns red as the sunglasses start to charge. The light
goes out automatically when charging is completed.
How to Use
1. ON/OFF power switch.
Push Power/Pairing button from 7 seconds.
Blue indicator ⑤ flashes（slow）as the power turns ON.
Another push to the Power/Pairing button ④ from 7 seconds turns the
power OFF and the indicator goes out.
2. Volume control
The volume can be controlled in five levels.
The volume increases by one level as each time the volume button ③
is pushed.
Another push at maximum level brings back to the lowest level.
（1, 2, 3, 4, 5 1, 2, 3・・・）
3. Default setting
Regarding default setting, please refer paring section in Page 6.
4. Reconnect with the mobile phone
Once the pairing with your mobile is completed, automatic reconnection and wait mode is achieved by turning the power switch ON.
＊Some mobile phones may require the following procedure.
Turn ON the power switch of the product. Select ［BT-02］ from the
equipment list on your mobile screen. Connect the product
with your mobile.
To answer incoming Call
5. Once the headset is in wait mode, switching to a talk mode is
automatic when there is an incoming on your mobile. Pressing the
Power/Pairing button ④ also switch to a talk mode.
＊If there is an incoming on your mobile while listening to the music, volume
is minimized and automatic connection with the mobile is made
（automatic switch function）.
To end a call
6. Wait for the other party to hang up or push Power/Pairing button ④ to
end a call.
Talk mode changes to a wait mode.
The mode switches back automatically to the music mode if you were
listening to music.
To reject incoming call
7. Press Power/Pairing button ④ from 3 to 6 seconds while the phone is
ringing. The call is rejected without answering.
Pairing
CONNECTION INSTRUCTIONS FOR THE D01
Your new SG01 can only be connected to mobile phones, mp3 and
GPS navigators that come provided with a
communication
system.
To connect the SG01 to your mobile phone or mp3, it is necessary to
make an initial setting operation called “PAIRING”.
The PAIRING process is required for only the first time you are going
to use your SG01 system.
(After the first power up pf the unit, you will only have to follow the
normal ON/OFF procedure going forward.)
PAIRING PROCEDURE
1) Your SG01 must be switched off.
2) Again, your mobile phone or MP3 must have
systems
and they must be enabled on your device. (Please refer to your phone
or mp3 manual for directions / support).
3) Push your SG01 on/off-pairing button and keep it pressed for about
7 seconds – until you see a fast blue blinking LED light on the unit.
4) Take your now
enabled phone or MP3 and select
“search option”. When your phone or mp3 will detect SG01, the name
of SG01(BT-02)will appear. Please select the unit to PAIR with your
phone or MP3.
PLEASE NOTE
Some models of mobile phone or MP3 also may require you to insert a
password.
Should this be requested-Please enter 0000 as your code and press
enter.
5) The blue indicator will change from a fast to a slow flashing LED
light when the pairing operation is successful.
YOUR PAIRRING OPERATION IN NOW COMPLETE
IMPORTANT NOTE :If you wish to use your mobile phone for phone
calls and your MP3 for listening to music at the same time , it is necessary to do the PAIRING operation for both the mobile phone and the
MP3. (Note – PAIR one unit at a time / only one unit is to be powered
on at a time to have a successful PAIRING.
(You can not have both the phone and the MP3 units powered on the
time when PAIRING.)
7.To switch a call
Push the volume control button ③ from 3 to 6 seconds while talking
on the headset.
The call is switched from the headset to your mobile phone.
Also, while talking on the mobile, push the volume control button ③
on the headset from 3 to 6 seconds to switch the call from the mobile
to the headset
8.Redial
Push the volume control button ③ from 3 to 6 seconds while in a wait
mode. Previous number can be redialed from the headset.
※ Remarks: For switching a call(#7) and redialing(#8),waiting time
could be changed depends on the equipment of each mobile phones.
Please release the finger from the hold button while alert sound
comes.
Special Instructions for Power/Pairing Button
LED display and the headset mode change according to the duration of
the Power/Pairing button pushed at “OFF” and doing nothing after the
Button is released as shown in the following chart. Shaded part shows
the normal workable range. Please use in the workable range.
If nothing is done while in Pairing Mode, the mode is cancelled after 120 seconds and
the power shuts “OFF”. The same occur when the pairing process fails.
When using the headset after the pairing is completed, pushing the Power/Paring button
for more than 6 seconds in a row, brings back the paring mode.
If in a wrong mode, turn the power “OFF” and push again the Power/Pairing button for
the mode of your choice.
Note
1. Rechargeable high-performance lithium polymer battery is used, but it
is expendable. Although the battery under normal use has a long life,
such characteristic deteriorates with time. For maximum performance, usage under normal temperature is recommended.
2. In outdoor use under strong wind condition, party on the other end
may have difficulty hearing your voice. In such case, move to less
windy location.
Headset
Receiver
Microphone
Specifications
Type
Electret Condenser
Output Impedance
Less than 2.2KΩ（RL=2.2KΩ）
Frequency Response
200Hz ∼ 8000Hz
Microphone Sensitivity
‐44dB±4dB at 1KHz, （OdB=1PV/Pa）
Directivity
Non-directional
Type
Magnetic
Input Impedance
10Ω±30% at 1KHz
Frequency Response
300Hz ~ 3000Hz
Output Level
Size（WxHxD）
110d±5dB at 1kHz（OdB=1µN/1mW）
151 x 55 x 170 mm
Weight
47g（1.7 OZ）
Built-in Battery
Lithium Polymer 3.7V 250mAh
Operation Time
Approximately 5hours
Wireless Method
Tuned to BLUETOOTH 2.1
Profile
HSP, HFP, A2DP
Charge Method
USB Charge Cable
Charge Time
Approximately 3 hours
Troubleshooting
If problem arise, refer to the following before requesting repair service.
Common Problem
Check point
●Electric power does
not turn ON
●Battery is fully charged.
●Power/Pairing Button is pushed 3 to 6
seconds.
●Pairing process with mobile phone is completed.
●Other party’s voice is
●The headset is connected to your mobile phone.
inaudible.
●Volume level is adjusted to an audible level.
●Volume level of the mobile is properly adjusted.
●Volume control is properly adjusted.
●Other party’s voice is
●Volume control of the mobile is properly adjusted.
hardly audible.
●Pairing process with the mobile is completed.
●Other party can not
●The headset is connected to your mobile phone.
hear you.
●Too noisy or windy environment.
●Your mobile phone
●The Power/Paring button is pushed for more
does not recognize the
than 6 seconds.
headset at pairing
process.
●Pairing process is
●Wrong Bluetooth equipment is selected when
completed but there is
setting the mobile phone.
no connection with the
mobile phone.
●When a call is made on ●Some mobile are not automatically connected.
the mobile, there is no
To connect, push the volume button from 3 to 6
automatic connection
seconds.
with the headset.
【Attention】
Lower battery indicates fast flashing twice as the time of slow blinking
in a standard mord. （Blue indicator ⑤）. You can also hear beaping
sounds from the speaker while internal blinking. Please recharge the
battery if the light flases accordingly this.
＊Standard mode
●
●
●
●
●
●
→
＊Lower Battery mode
●
● ●● ●
●
● ●● ●
→
Warranty
In case of malfunction in spite of correct usage that is consistent with this
Owner’s Manual and if it occurs during the valid warranty period, we provide
free of charge repair service or replace defect product. Temco and Buhek shall
not be liable for any incidental or consequential damages resulted from
malfunctioning of the product.
When requesting repair service, Warranty Card must be attached to the product
and presented to the dealer from whom you purchased. Warranty Card without
the date of purchase and store stamp/signature will not be considered as proof
of purchase and free of charge repair will not be provided.
TIMPORTANT
NOTE:
FOR
E.C.COUNTRIES,CUSTOMERS
MUST
EXHIBIT,TOGETHER WITH THE CERTIFICATE, A VALID RECEIPT ISSUED
BY THE DEALER, SHOWUNG THE DATE OF PURCHASE OF THE
PRODUCT
The followung are sime of the examples which will not qualify for free of charge
repair service. You will be asked to pay.
Warranty period is expired.
If Warranty Card is not presentedor incompletely filled or if there is an evidence
of tampering.
Malfunction is caused by mishandling, improper repair work, unauthorixed
modification and adjustment, disassembling and wrong cable connection.
Damge resulting from transporting the product after the purchase, traveling, or
mishandling of the product such as dropping.
Damage caused by abnormal voltage or use of unspecifide voltage.
Damage csused by acts of God; caused by fire,natural disaster,seawind.
Replacement of expendable supply such as battery.
Repair service done during warranty period does not extend warranty period.
Defective devices or components returned to be replaced woll become Buhel’s
property.
WARRANTY
Model
Name
Address
SG01
Phone number
Date of Purchase
Term of Warranty
TWO Year
Dealer info AND STAMP
DISTRIBUITED BY
BUHEL SRL
VIA DELLA RESISTENZA 37
20090 BUCCINASCO ( MILANO ) ITALY
TEL. +3902488951 – FAX +39024571225
info@buhel.com www.buhel.com
ENGINERED BY TEMCO JAPAN CO., LTD - JAPAN
MADE BY TEMCO SHANGHAI CO., LTD – CHINA
10
FCC ID: OQB-SG01
IMPORTANT REGULATORY INFORMATION
This device complies with Part 15 of the FCC Rules:
Operation is subject to the following two conditions:
1. This device may not cause harmful interference and
2. This device must accept any interference that is received, including any
interference that may cause undesired operation.
WARNING:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipments.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
Linearized                      : No
Page Count                      : 11
PDF Version                     : 1.4
Title                           : SG01 User Manual
Author                          : yimi
Subject                         : 
Apple Keywords                  : 
Creator                         : Microsoft Word
Producer                        : Mac OS X 10.5.8 Quartz PDFContext
Create Date                     : 2011:03:28 06:28:30Z
Modify Date                     : 2011:03:28 06:28:30Z

EXIF Metadata provided by EXIF.tools