Tera Tron GX120 Inductive System User Manual Annex No 5

Tera Tron GmbH Inductive System Annex No 5

Manual

Download: Tera Tron GX120 Inductive System User Manual Annex No 5
Mirror Download [FCC.gov]Tera Tron GX120 Inductive System User Manual Annex No 5
Document ID937153
Application IDOoBCXLUVeGwnF2mhTaeJcg==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize20.63kB (257833 bits)
Date Submitted2008-05-06 00:00:00
Date Available2008-05-06 00:00:00
Creation Date2007-09-24 17:52:14
Producing SoftwareAcrobat Distiller 8.1.0 (Windows)
Document Lastmod2007-09-24 17:52:44
Document TitleMicrosoft Word - Annex No 5 _User Manual_.doc
Document CreatorPScript5.dll Version 5.2
Document Author: Ralf Trepper

Annex No.5
Page 1 of 7
User Manual
Hilti GX 120
Technical description
RFID-Reader GX120
Von / From:
Datum / Date:
Seite / Page:
RHE
03.08.07
1/6
Dokumenten-Nr.
2.0
Projekt
Hilti GX 120
Dokumentenversion
1.0
Erstelldatum : 03.08.2007
Tel.
+49-2261-8082-233
Fax
-833
Autor
V1.0
Name
Rainer Helberg
Dokumentenstatus
released
Vertraulichkeit
Verteiler
Querverweise
E-Mail
rainer.helberg@teratron.de
Strictly confidential
Organisation
Name
Technical description
RFID-Reader GX120
Von / From:
Datum / Date:
Seite / Page:
RHE
03.08.07
2/6
1.
TECHNICAL DESCRIPTION....................................................................................... 2
2.
BLOCK DIAGRAM ...................................................................................................... 4
3.
GEOMETRY OF PCB.................................................................................................. 5
4.
IMPORTANT REQUEST: ............................................................................................ 5
5.
LABEL:........................................................................................................................ 6
1. Technical Description
The reader is used in a gas can driven direct fastener tool for metal nails.
It is mounted inside of the tool and communicate with special transponders which are fitted at the
gas cans.
It controls the use of the correct gas can for the tool and also it show the user the remaining gas
level inside the can by 5 LED’
s. This is possible, by writing the actual needed gas consumption into
the transponder during working after each shot.
The reader is working together with a second electronic which controls the gas growd and generate
the ignition puls for the spark plug.
The communication to the transponder is working with a 125kHz field.
Here you can see the the RFID reader fitted in it’
s housing:
Technical description
RFID-Reader GX120
Von / From:
Datum / Date:
Seite / Page:
RHE
03.08.07
3/6
The following picture shows the opened tool with the electronics and the battery:
This picture shows the RFID reader PCB alone. In the left you will see the coil for the 125 kHz
communication with the transponder:
Technical description
RFID-Reader GX120
Von / From:
Datum / Date:
Seite / Page:
RHE
03.08.07
4/6
2. Block diagram
antenna coil for
transponder
communication
battery
power
converter
noseswitch
switchinfo
readercircuit
communication lines
power
control
logic
communication lines
processor
processor
switch
control
logic
gas
can switch
LED for gas consumption level
Technical description
RFID-Reader GX120
Von / From:
Datum / Date:
Seite / Page:
RHE
03.08.07
5/6
3. Geometry of PCB
The picture shows the size of the PCB:
4. Important request:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation of the device."
Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment"
Technical description
RFID-Reader GX120
5. Label:
The following label will be fixed on each module:
Tested to comply with
FCC Standards
Model: GX120 – Reader
FCC ID: QLXGX120
IC: 4430A-GX120
Von / From:
Datum / Date:
Seite / Page:
RHE
03.08.07
6/6

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Format                          : application/pdf
Creator                         : Ralf Trepper
Title                           : Microsoft Word - Annex No 5 _User Manual_.doc
Create Date                     : 2007:09:24 17:52:14+02:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2007:09:24 17:52:44+02:00
Metadata Date                   : 2007:09:24 17:52:44+02:00
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Document ID                     : uuid:7f159850-fd2d-421c-a1bd-42505126b670
Instance ID                     : uuid:746c8cf3-0bbf-4958-b8dc-72fbe129cd9c
Page Count                      : 7
Author                          : Ralf Trepper
EXIF Metadata provided by EXIF.tools
FCC ID Filing: QLXGX120

Navigation menu