Testo SE and KGaA 04404000 testo 400 - Universal IAQ instrument User Manual 0975 0111 en 01x

Download:
Mirror Download [FCC.gov]
Document ID	4163936
Application ID	29aCmwq1GdYTM9lbVRcxFw==
Document Description	Users manual_0975 0111 en 01
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	15.98kB (199789 bits)
Date Submitted	2019-02-12 00:00:00
Date Available	2019-02-12 00:00:00
Creation Date	2018-08-16 12:41:35
Producing Software	Acrobat Distiller 18.0 (Windows)
Document Lastmod	2018-08-16 12:41:35
Document Title	Microsoft Word - 0975 0111 en 01.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	mwwh

Testo - Information
Safety
Environment
Cleaning
Storage
Contents
Contents
About this document ...................................................................................3
General safety instructions .........................................................................4
Disposal ........................................................................................................6
Energy storage (batteries, rechargeable batteries and button cells) ......6
Cleaning ........................................................................................................7
Products with wireless technology ............................................................7
Storage ..........................................................................................................7
Approvals......................................................................................................8
EU declaration of conformity ......................................................................8
1 About this document
1 About this document

The Testo Information document is an integral part of the product.

Read this document through carefully to prevent injuries and damage to the
product. Familiarize yourself with the product before using it.

Keep this documentation to hand so that you can refer to it when necessary.

Hand this documentation on to any subsequent users of the product.
Symbols and writing standards
Representa
tion
Explanation
Note: basic or further information
…
Action: several steps, the sequence must be followed.
►
Result of an action

Requirement
Warning notices
Always pay attention to any information marked with the following warning
notices along with warning pictograms. Implement the specified precautionary
measures!
DANGER
Risk of death!
WARNING
Indicates possible serious injury.
CAUTION
Indicates possible minor injury.
CAUTION
Indicates possible damage to equipment.
2 General safety instructions
2 General safety instructions
You will find product-specific safety instructions, approvals and
technical data in the accompanying documentation or on the Testo
website, www.testo.com, under the product-specific download.

Only operate the product properly, for its intended purpose, and within the
parameters specified in the technical data.

Do not apply any force.

Do not operate the product if there are signs of damage on the housing,
mains unit or connected cables.

Only use the product in closed, dry rooms and protect it from rain and
moisture.

The product must be checked for any visible damage before commissioning.

Dangers may also arise from objects to be measured or the measuring
environment. Always comply with the locally valid safety regulations when
carrying out measurements.

Only perform maintenance and repair work on this instrument that is
described in this documentation. Follow the prescribed steps exactly when
doing the work.

Any additional work must only be carried out by authorized, qualified
personnel. Otherwise, Testo will refuse to accept responsibility for the proper
functioning of the product after repair and for the validity of approvals.

Maintenance work that is not described in this documentation must only be
carried out by trained service engineers.

Safety instructions for patients with an implanted cardiac pacemaker when
using Testo products with magnets
Handle instruments or accessories containing a magnet with care and
keep them in a safe place.
Maintain a distance of 20 cm between your implant and the magnet
which is incorporated into the instrument or accessories.
Keep a safe distance from products which could be damaged by the effects
of magnetism (e.g. monitors, computers, pacemakers or credit cards).


Use only original spare parts from Testo.

Temperature information given on probes/sensors relates only to the
measuring range of the sensor technology. Do not expose handles and
supply lines to temperatures above 45°C (113°F), unless they are explicitly
approved for higher temperatures.
2 General safety instructions
WARNING
Risk of burns due to hot probes, probe shafts and sensor tips!
 Do not get hold of hot parts (> 45°C/113°F) with bare hands
immediately after a measurement.
- In the event of burns, immediately cool the relevant spot with cold water and
consult a doctor if necessary.
Allow probes, probe shafts and sensor tips to cool down.

The product must not be used in potentially explosive atmospheres, if it is
not explicitly approved for these areas.

Do not carry out any contact measurements on uninsulated, live parts.

Do not expose the product to any extremely high or low temperatures. Avoid
temperatures below -5°C or above 45°C. The exception is when a product
has been explicitly approved for other temperatures.

Protect the product from dust and dirt. Make sure that it is not exposed to an
environment with dust, dirt, sand, etc.

Prevent the product from falling.

If operator safety can no longer be guaranteed, the product is to be taken
out of service and secured against inadvertent use. This is the case if the
product:
is obviously damaged
has fractures on the housing
has faulty measuring cables
has leaking batteries
no longer performs the required measurements
has been stored for too long in unfavourable conditions
has been exposed to mechanical stresses in transit
3 Disposal
3 Disposal

Dispose of faulty energy storage units in accordance with the valid legal
specifications.

At the end of its useful life, deliver the product to the separate collection
point for electric and electronic devices (observe local regulations) or return
the product to Testo for disposal.


WEEE Reg. no. DE 75334352
Any button cells that may be used in a Testo product contain 1,2Dimethoxyethane (CAS 110-71-4). In this connection, see EU Regulation no.
1907/2006 (REACH) Art. 33.
4 Energy storage (batteries,
rechargeable batteries and button
cells)

Improper use of energy storage units may cause destruction of the storage
units, injuries due to current surges, fire or the escape of chemicals.

Only use the energy storage units supplied in accordance with the directions
in the instruction manual.

Do not short-circuit the energy storage units.

Do not take energy storage units apart and do not modify them.

Do not expose energy storage units to heavy impacts, water, fire or
temperatures above 60°C, unless they are explicitly approved for higher
temperatures.

Do not store the energy storage units near any metal objects.

Do not use any leaky or damaged energy storage units.

Only charge the product using the recommended mains unit or in the
recommended charging station.

Immediately stop the charging process if this is not completed in the given
time.

Remove the mains cable or take the energy storage unit out of the
instrument immediately if the energy storage unit is not functioning properly
or if it shows signs of superheating. Energy storage unit may be hot!
5 Cleaning

If there is any contact with the liquid from an energy storage unit: rinse the
affected areas thoroughly with water and if necessary consult a doctor.

When the product is not in use for a long period of time, remove reusable
energy storage units to prevent exhaustive discharge.
5 Cleaning

Clean the product with a dry, soft cloth. Do not use any alcohol, aggressive
cleaning agents and solvents or other washing liquids to clean the product.

Do not use any desiccants.

Use distilled water, or alternatively mild solvents or degreasers.

Store solvents and degreasers separately from the product, because leaking
solvents and degreasers may cause damage to the product.

The use of strong or harsh alcohol or brake cleaner may result in damage to
the product.
6 Products with wireless technology
Changes or modifications that have been made without the explicit consent of
the competent approval authority may lead to cancellation of the type approval.
Data transfer may be disturbed by equipment that uses the same ISM band.
Places where the use of radio communication links is not permitted include
aeroplanes and hospitals. For this reason, the following points must be ensured
before entering:

Switch the instrument off.

Disconnect the instrument from any external power sources (mains cable,
external energy storage units, etc.).
7 Storage

Keep the product away from any liquids and do not put it into water. Protect
it from rain and humidity.

Do not store the product together with solvents.
8 Approvals
8 Approvals
Please find the current country approvals in the attached document.
Please note the following country-specific information for the product
authorization.
The use of the wireless module is subject to the regulations and
stipulations of the respective country of use and the module may only
be used in countries for which a national certification has been granted.
The user and every owner has the obligation to adhere to these
regulations and prerequisites for use and acknowledges that the resale, export, import, etc., in particular in, to or from countries without
wireless authorization, is their responsibility.
9 EU declaration of conformity
You can find the EU declaration of conformity on the Testo website,
www.testo.com, under the product-specific downloads.
Testo SE & Co. KGaA
Testo-Strasse 1
D-79853 Lenzkirch
Germany
Phone: +49 7653 681-0
Fax: +49 7653 681-7699
E-mail: info@testo.de
www.testo.de
0975 0111 en 01

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Producer                        : Acrobat Distiller 18.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2018:08:16 12:41:35+02:00
Create Date                     : 2018:08:16 12:41:35+02:00
Format                          : application/pdf
Title                           : Microsoft Word - 0975 0111 en 01.docx
Creator                         : mwwh
Document ID                     : uuid:d4116f9e-fc08-4bc4-a639-7447f9896ded
Instance ID                     : uuid:6ee73004-aff2-4a51-9011-3b5cf174f2ff
Page Count                      : 12
Author                          : mwwh

EXIF Metadata provided by EXIF.tools