Testo SE and KGaA 05541111 Bluetooth handle with measuring probes User Manual 0971 0447 en 01 dx

Download:
Mirror Download [FCC.gov]
Document ID	3685381
Application ID	rso54TWgiR9leXR/tzlDTw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	10.63kB (132827 bits)
Date Submitted	2017-12-20 00:00:00
Date Available	2018-06-19 00:00:00
Creation Date	2017-12-08 07:04:01
Producing Software	Acrobat Distiller 18.0 (Windows)
Document Lastmod	2017-12-08 07:04:01
Document Title	Microsoft Word - 0971 0447 en 01 d.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	mwwh

Handle for probe heads with Bluetooth®
0554 1111
Short instructions
Application
The handle with Bluetooth® 0554 1111 is used for the wireless connection of
probe heads to the testo 440 measuring instrument.
Observe the information on the measuring process in the detailed
instrument instruction manual. You will find these at: www.testo.com.
General safety instructions

Only operate the product properly, for its intended purpose, and within the
parameters specified in the technical data. Do not apply any force.

Dangers may also arise from the systems to be measured or from the
measuring environment: Always comply with the locally valid safety
regulations when carrying out measurements.

Do not operate the instrument if there are signs of damage on the housing.

Do not store the product together with solvents. Do not use any desiccants.

Only perform that maintenance and repair work on this instrument which is
described in the documentation. Follow the prescribed steps exactly when
doing the work. Use only original spare parts from Testo.

Temperature information given on probes/sensors relates only to the
measuring range of the sensor technology. Do not expose handles and feed
lines to temperatures in excess of 50 °C (122 °F), unless they are expressly
authorised for use at higher temperatures.

Do not operate the instrument if there are signs of damage on the housing
or cable.
Batteries

Improper use of batteries may cause destruction of the batteries, injuries
due to current surges, fire or the escape of chemicals.

Only use the batteries supplied in accordance with the instructions in the
instruction manual.

Do not short, take apart or modify batteries.

Do not expose the batteries to heavy impacts, water, fire or temperatures
above +140 °C or below -20 °C.

Do not store unused batteries in the proximity of metal objects.

Do not use any leaky or damaged batteries.

In the event of contact with battery acid: rinse affected areas thoroughly
with water, and if necessary consult a doctor.
Structure
Element
Element
1 Quick-release connector for
probe heads and adapter
3 Button
2 LED status display
4 Battery compartment (on rear)
LED status display
LED status display
Meaning
Flashing red
Flashing yellow
Low battery status
Measurement probe is switched on and is
searching for a Bluetooth connection, but is
not connected.
Measurement probe is switched on and
Bluetooth is connected.
Flashing green
Switching on and establishing the Bluetooth connection
- You need the testo 440 with Bluetooth enabled in order to be able to
establish a connection via Bluetooth.
1 - Press button on the handle.
The handle is switched on.

The LED flashes yellow while the Bluetooth connection is being

established.
The LED lights up green as soon as the connection between your

measurement probe and the testo 440 has been established.
Switching off
1 - Press and hold the button on the handle for three seconds.
The handle is switched off.

Using the handle
You can initiate various functions on the testo 440 using the button on the
handle, such as starting and stopping a series of measurements. You will find
detailed information on how each of the handle’s functions work in the
corresponding chapter of the instruction manual for the measuring instrument.
Technical data
Feature
Value
Storage temperature
Operating temperature
Dimensions
Warranty
-10°C to +50°C
0 to +50°C
170 mm x 50 mm x 40 mm
Duration: 2 years
Warranty terms: see www.testo.com/warranty
website.
Approvals
The use of the wireless module is subject to the regulations and
stipulations of the respective country of use, and the module may only
be used in countries for which a country certification has been granted.
The user and every owner has the obligation to adhere to these
regulations and prerequisites for use, and acknowledges that the resale, export, import etc. in particular in countries without wireless
permits, is his responsibility.
Product
Mat.-No.:
Date
Country
Australia
0554 1111
0554 1111
06.12.2017
Comments
E 1561
Country
Comments
Canada
Product IC ID: 6127B-05541111
IC Warnings
Europa + EFTA
The EU Declaration of Conformity can be
found on the testo homepage www.testo.com
under the product specific downloads.
EU countries:
Belgium (BE), Bulgaria (BG), Denmark (DK), Germany (DE),
Estonia (EE), Finland (FI), France (FR), Greece (GR), Ireland
(IE), Italy (IT), Latvia (LV), Lithuania (LT), Luxembourg (LU),
Malta (MT), Netherlands (NL), Austria (AT), Poland (PL),
Portugal (PT), Romania (RO), Sweden (SE), Slovakia (SK),
Slovenia (SI), Spain (ES), Czech Republic (CZ), Hungary
(HU), United Kingdom (GB), Republic of Cyprus (CY).
EFTA countries:
Iceland, Liechtenstein, Norway, Switzerland
Japan
Turkey
USA
Japan Information
Authorized
Product FCC ID: WAF-05541111
FCC Warnings
BluetoothModule
Feature
Bluetooth range
Bluetooth type
Values
< 20 m (free field)
L Series BLE module (08 May 2013)
based on TI CC254X chip
Qualified Design ID
B016552
Bluetooth radio class Class 3
Bluetooth company
LSD Science & Technology Co., Ltd
RF Band
2402-2480MHz
Output power
0 dBm
IC Warnings
RSS-Gen & RSS-247 statement:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
Caution: Radio Frequency Radiation Exposure
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment and meets the IC radio frequency (RF) Exposure
Guidelines. This equipment should be installed and operated keeping the
radiator at least 20 cm or more away from person´s body in normal use
position.
Co-Location:
This transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter.
Attention : exposition au rayonnement de radiofréquences
Cet équipement est conforme aux limites d'exposition aux radiofréquences IC
fixées pour un environnement non contrôlé et aux Lignes directrices relatives à
l'exposition aux radiofréquences (RF). Cet équipement devrait être installé et
utilisé à une distance d'au moins 20 cm d'un radiateur ou à une distance plus
grande du corps humain en position normale d'utilisation.
Co-location
Ce transmetteur ne peut pas être installé en colocation ou être utilisé avec une
autre antenne ou transmetteur, quel qu'en soit le type.
FCC Warnings
Information from the FCC (Federal Communications Commission) for your own
safety.
Shielded cables should be used for a composite interface. This is to ensure
Information from the FCC (Federal Communications Commission)
For your own safety
Shielded cables should be used for a composite interface. This is to ensure
continued protection against radio frequency interference.
FCC warning statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
 Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.
Caution
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment. Shielded
interface cable must be used in order to comply with the emission limits.
Warning
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution: Radio Frequency Radiation Exposure
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines. This equipment should be installed and operated keeping the
radiator at least 20 cm or more away from person´s body in normal use position
Japan Information
当該機器には電波法に基づく、技術基準適合証明等を受けた特定無線設備を装
着している。
0971 0447 en 01 c

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : mwwh
Create Date                     : 2017:12:08 07:04:01+01:00
Modify Date                     : 2017:12:08 07:04:01+01:00
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - 0971 0447 en 01 d.docx
Creator                         : mwwh
Producer                        : Acrobat Distiller 18.0 (Windows)
Document ID                     : uuid:58791d91-34cb-4c16-be61-a8d258f7ac65
Instance ID                     : uuid:e0253190-0a59-4efa-8fb7-e5e7aa8f9345
Page Count                      : 10

EXIF Metadata provided by EXIF.tools