Testo SE and KGaA 20160621 Bluetooth/IRDA printer User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2979793
Application ID	ntzyUGo+yPxQAL6rGqZiSA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	167.74kB (2096786 bits)
Date Submitted	2016-05-05 00:00:00
Date Available	2016-05-06 00:00:00
Creation Date	2016-04-07 10:15:59
Producing Software	Acrobat Distiller 10.0.0 (Windows)
Document Lastmod	2016-04-07 10:15:59
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2.2

Bluetooth®/IRDA printer
0554 0620/ 0554 0621
Instruction manual
2
1 Contents
Pos: 1 /TD/Überschriften/1. Inhalt @ 0\mod_1177587817070_79.docx @ 1243 @ 1 @ 1
Contents
Contents ...................................................................................................3
Safety and the environment ....................................................................4
Specifications ..........................................................................................4
3.1. Use ..................................................................................................4
3.2. Technical data .................................................................................4
EC declaration of conformity 0554 0620 ..................................................................... 10
EC declaration of conformity 0554 0621 ..................................................................... 11
Product description ...............................................................................12
4.1. Overview........................................................................................12
4.2. Operating mode indicator ..............................................................13
4.3. Control key functions .....................................................................13
First steps ..............................................................................................14
5.1. Charging the rechargeable battery ................................................14
5.2. Inserting paper...............................................................................14
Using the product ..................................................................................15
Pos: 2 /TD/--- Seitenwechsel --- @ 0\mod_1173774430601_0.docx @ 283 @ @ 1
3 Specifications
Pos: 3 /TD/Überschriften/2. Sicherheit und Umwelt @ 0\mod_1173774719351_79.docx @ 292 @ 1 @ 1
Safety and the environment
Pos: 4 /TD/Sicherheit und Umwelt/Umwelt schützen/Akkus/Batterien entsorgen @ 0\mod_1175693637007_79.docx @ 619 @ @ 1
> Dispose of faulty rechargeable batteries/spent batteries in
accordance with the valid legal specifications.
Pos: 5 /TD/Sicherheit und Umwelt/Umwelt schützen/Produkt entsorgen @ 0\mod_1173780307072_79.docx @ 357 @ @ 1
> At the end of its useful life, send the product to the separate
collection for electric and electronic devices (observe local
regulations) or return the product to Testo for disposal.
Pos: 6 /TD/Überschriften/3. Leistungsbeschreibung @ 0\mod_1173774791554_79.docx @ 301 @ 1 @ 1
Specifications
Pos: 7 /TD/Überschriften/3.1 Verwendung @ 0\mod_1176211016437_79.docx @ 695 @ 2 @ 1
3.1.
Use
Pos: 8 /TD/Leistungsbeschreibung/Verwendung/Printer/Bluetooth Drucker 0554 0620/0554 0621 @ 15\mod_1389342934570_79.docx @ 180623 @ @ 1
The testo Bluetooth®/IRDA printer is used to produce report
printouts, in conjunction with compatible devices:
E.g. testo 330 (0632 3306 - 3307 from firmware 2.02 onwards),
testo 320 (from firmware 1.06 onwards), testo 324 (from firmware
1.08 onwards), testo 330i (0554 0621 only)
Pos: 9 /TD/00-WICHTIG, prüfen, ggf. einfügenFunk-Modul Verwendung (BT) @ 17\mod_1435043854314_79.docx @ 214068 @ @ 1
The use of the wireless module is subject to the regulations and
stipulations of the respective country of use, and the module may only
be used in countries for which a country certification has been granted.
The user and every owner has the obligation to adhere to these
regulations and prerequisites for use, and acknowledges that the resale, export, import etc. in particular in countries without wireless
permits, is his responsibility.
Pos: 10 /TD/Überschriften/3.2 Technische Daten @ 0\mod_1176211088437_79.docx @ 704 @ 2 @ 1
3.2.
Technical data
Pos: 11 /TD/Leistungsbeschreibung/Technische Daten/Printer/0554 0620/0554 0621 Allgemein @ 15\mod_1389099822986_79.docx @ 180164 @ 5 @ 1
General data
Feature
Values
Model
Thermal printer with Bluetooth® and IrDA
interface
Printing speed
30 mm/s
Operating
temperature
0 to +50 °C / 32 to 122 °F
Storage
temperature
-20 to +50 °C / -4 to 122 °F
Dimensions
(LxWxH)
150 mm x 80 mm x 41 mm
3 Specifications
Feature
Values
Weight
approx. 400 g (including rechargeable battery
pack, paper roll, mains unit)
EU Directive
2014/30/EC
Power supply
Lithium-Ion rechargeable battery pack,
2600 mAh, 3.7 V
Thermal paper roll
56.5 mm x 34 mm x 12 mm
Rechargeable
battery storage
temperature
±0 to 35 °C / 32 to 95 °F
Rechargeable
battery charge time
approx. 5-6 h
Rechargeable
battery life
approx. 50 m report printouts
Bluetooth®
(optional)
Range < 10 m
Warranty
2 years (excl. printer mechanism,
rechargeable battery pack)
Warranty terms
Warranty terms: see website
www.testo.com/warranty
Pos: 12 /TD/Leistungsbeschreibung/Technische Daten/Printer/0554 0620/0554 0621 @ 15\mod_1389099957572_79.docx @ 180198 @ 55 @ 4
Bluetooth® data 0554 0620
Feature
Values
Type
designation
Bluegiga WT12
Specification
2.0
Radio class
Class 2
Coverage
< 10 m / < 32.8 ft.
Product note
WT12
Identification
B011198
Company
10274
Certification
EU countries:
Belgium (BE), Bulgaria (BG), Denmark (DK),
Germany (DE), Estonia (EE), Finland (FI), France
(FR), Greece (GR), Ireland (IE), Italy (IT), Latvia
(LV), Lithuania (LT), Luxembourg (LU), Malta
3 Specifications
Feature
Values
(MT), Netherlands (NL), Austria (AT), Poland (PL),
Portugal (PT), Romania (RO), Sweden (SE),
Slovakia (SK), Slovenia (SI), Spain (ES), Czech
Republic (CZ), Hungary (HU), United
Kingdom (GB), Republic of Cyprus (CY).
EFTA countries:
Iceland, Liechtenstein, Norway, Switzerland
Other countries:
Colombia, El Salvador, Turkey, Ukraine, Australia,
USA, Canada
FCC (Federal Communications Commission)
notice
- This instrument fulfils part 15 of the FCC Rules
- Its commissioning is subject to the following
two conditions:
1. this instrument must not cause any harmful
interference and
2. this instrument must be able to cope with
interference, even if this has undesirable
effects on operation.
Changes
The FCC demands that the user be informed that
any changes or modifications to the instrument
that are not explicitly approved by testo AG may
void the user's right to use this instrument.
Bluetooth® data 0554 0621
Feature
Values
Type
designation
Stollmann E+V GmbH BlueMod+SR (August
2013)
Specification
4.0, Bluetooth® Classic / LowEnergy
Coverage
< 10 m / < 32,8 ft.
Product note
BlueMod+SR
Identification
B021281
Company
44784
3 Specifications
Certification
Country
Comments
EU + EFTA
EU countries:
Belgium (BE), Bulgaria (BG), Denmark (DK),
Germany (DE), Estonia (EE), Finland (FI),
France (FR), Greece (GR), Ireland (IE), Italy
(IT), Latvia (LV), Lithuania (LT), Luxembourg
(LU), Malta (MT), Netherlands (NL), Austria
(AT), Poland (PL), Portugal (PT), Romania
(RO), Sweden (SE), Slovakia (SK), Slovenia
(SI), Spain (ES), Czech Republic (CZ), Hungary
(HU), United Kingdom (GB), Republic of Cyprus
(CY).
EFTA countries:
Iceland, Liechtenstein, Norway, Switzerland
Australia
E1561
Turkey
Authorized
India
Authorized
Canada
Contains FCC ID: 4957A-MSR
Product IC ID: -20160621
IC Warnings
USA
Contains FCC ID: RFRMS
Product FCC ID: WAF-20160621
FCC Warnings
Korea
MSIP-RMM-TE1-BTIRDA
KCC Warning
Japan
Japan Information
3 Specifications
IC Warnings
This instrument complies with Part 15C of the FCC Rules and
Industry Canada RSS-210 (revision 8). Commissioning is subject to
the following two conditions:
(1) This instrument must not cause any harmful interference and
(2) this instrument must be able to cope with interference, even if
this has undesirable effects on operation.
Cet appareil satisfait à la partie 15C des directives FCC et au
standard Industrie Canada RSS-210 (révision 8). Sa mise en
service est soumise aux deux conditions suivantes :
(1) cet appareil ne doit causer aucune interférence dangereuse et
(2) cet appareil doit supporter toute interférence, y compris des
interférences qui provoquerait des opérations indésirables.
FCC Warnings
Information from the FCC (Federal Communications Commission)
For your own safety
Shielded cables should be used for a composite interface. This is to
ensure continued protection against radio frequency interference.
FCC warning statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
3 Specifications
Caution
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment. Shielded interface cable must be used in
order to comply with the emission limits.
Warning
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
KCC Warning
해당 무선 설비는 운용 중 전파혼신 가능성이 있음
Japan Information
当該機器には電波法に基づく、技術基準適合証明等を受けた特定
無線設備を装着している。
Pos: 13 /TD/Leistungsbeschreibung/Technische Daten/Printer/0554 0620/0554 0621 Zubehör_Ersatzteile @ 15\mod_1394171902221_79.docx @ 181793 @ 5 @ 1
Accessories/spare parts
Description
Item no.
Mains unit 5 V / 1.0 A with micro USB cable
0554 1105
Spare thermal paper, 6 rolls
0554 0568
3 Specifications
Pos: 14 /TD/Leistungsbeschreibung/Technische Daten/Printer/0554 0620/0554 0621 Konformitätserklärung @ 15\mod_1389102872708_79.docx @ 180232 @ 53 @ 1
EC declaration of conformity 0554 0620
10
3 Specifications
EC declaration of conformity 0554 0621
11
4 Product description
Pos: 15 /TD/Überschriften/4. Produktbeschreibung @ 0\mod_1173774846679_79.docx @ 310 @ 1 @ 1
Product description
Pos: 16 /TD/Überschriften/4.1 Übersicht @ 0\mod_1176379946003_79.docx @ 733 @ 2 @ 1
4.1.
Overview
Pos: 17 /TD/Produktbeschreibung/Übersicht/Printer/0554 0620/0554 0621 Übersicht @ 15\mod_1389166960309_79.docx @ 180338 @ @ 1
Bluetooth®/infrared interface
Operating mode indicator
On/Off control key
Paper feed control key
Paper roll (printable side out)
Paper compartment cover
Magnetic holder (on back)
WARNING
Magnetic field
May be harmful to those with pacemakers.
> Keep a minimum distance of 10 cm between pacemaker and
printer.
12
4 Product description
CAUTION
Magnetic field
Damage to other devices!
> Keep a safe distance away from products that could be
damaged by the effects of magnetism (e.g. monitors,
computers or credit cards).
Micro USB connection for connecting to the mains unit or the
PC.
Pos: 18 /TD/Produktbeschreibung/Grundlegende Eigenschaften/Printer/Anzeige Betriebsmodus 0554 0620/0554 0621 @ 15\mod_1389167175837_79.docx @ 180373 @ 2 @ 1
4.2.
Operating mode indicator
LED
Function
Steady green light
•
•
Flashing green light •
Standby mode
Printing out print data
Receiving print data
Steady red light
•
•
•
Not ready for operation
Paper compartment cover open
No paper inserted.
Flashing red light
•
Rechargeable battery low
Flashing red/green
light
•
Rechargeable battery is charging
Off
•
Sleep mode, automatically activated 2
minutes after a button was last pressed
Pos: 19 /TD/Produktbeschreibung/Grundlegende Eigenschaften/Printer/Funktionen der Bedientasten 0554 0620/0554 0621 @ 15\mod_1389167295522_79.docx @ 180406 @ 2 @ 1
4.3.
Control key functions
Control keys
Functions
•
•
•
•
Switch on printer:
press key < 2 s
Switch off printer:
press key > 2 s
Short paper feed:
press key < 1 s
Paper feed for as long as the key is
pressed:
press key > 1 s
13
5 First steps
Control keys
Functions
•
] and [
•
Start a test print (printer is switched off):
press keys < 1 s simultaneously
®
Bluetooth module test (printer is off):
press keys > 1 s simultaneously
Pos: 20 /TD/Überschriften/5. Erste Schritte @ 0\mod_1173774895039_79.docx @ 319 @ 1 @ 1
First steps
Pos: 21 /TD/Erste Schritte/Printer/Akku laden @ 15\mod_1389185163805_79.docx @ 180440 @ 255 @ 1
5.1.
Charging the rechargeable battery
The rechargeable battery can only be charged at an ambient
temperature of ±0 to +35 °C. If the rechargeable battery has been
completely discharged, charging time at room temperature using
the testo mains unit is approx. 6 h.
> Connect battery charger (0554 1105) to a mains socket and
connect the printer.
If stored for a prolonged period of time, the battery should
be charged every once in a while because otherwise this
may result in damage due to deep discharge.
Charging in the measuring instrument
1. Plug the mains unit instrument plug into the instrument's micro
USB socket.
2. Plug the mains plug of the mains unit into a mains socket.
- The charging process will start. The charging process will stop
automatically when the battery is fully charged.
Battery care
> Do not fully exhaust rechargeable batteries.
Pos: 22 /TD/Erste Schritte/Printer/Papier einlegen @ 15\mod_1389185219612_79.docx @ 180473 @ 2 @ 1
5.2.
Inserting paper
1. Flip paper compartment cover up.
2. Insert paper roll, see illustration.
3. Close paper compartment cover.
14
6 Using the product
Pos: 23 /TD/Überschriften/6. Produkt verwenden @ 0\mod_1173774928554_79.docx @ 328 @ 2 @ 1
Using the product
Pos: 24 /TD/Produkt verwenden/Printer/Daten drucken BT_IRDA @ 15\mod_1390297644383_79.docx @ 181133 @ 2 @ 1
Printing data
When first setting up a connection between a testo
measuring instrument and the Bluetooth / IRDA printer, the
initialization phase can last up to 30 seconds.
✓ Printer is switched on.
> Start the print process from the instrument transmitting the data.
- Data is printed out (LED flashes green).
=== Ende der Liste für Textmarke Inhalt ===
15
0973 0518 en 03a

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 16
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 10.0.0 (Windows)
GTS PDFX Version                : PDF/X-3:2002
Trapped                         : False
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2016:04:07 10:15:59+02:00
Create Date                     : 2016:04:07 10:15:59+02:00
Creator                         : PScript5.dll Version 5.2.2
Title                           : 
Author                          : 

EXIF Metadata provided by EXIF.tools