Texas Instruments 26M1 BLE and 802.15.4 module User Manual

Texas Instruments Inc. BLE and 802.15.4 module Users Manual

a href="https://usermanual.wiki/Texas-Instruments" itemprop="url"> Texas Instruments >

Users Manual

PRODUCTPREVIEWProductFolderSample &BuyTechnicalDocumentsTools &SoftwareSupport &CommunityAn IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,intellectual property matters and other important disclaimers. PRODUCT PREVIEW Information. Product in design phase ofdevelopment. Subject to change or discontinuance without notice.CC2650MODSWRS187 –AUGUST 2016CC2650MOD SimpleLink™ Multistandard Wireless MCU Module1 Device Overview11.1 Features1• Microcontroller– Powerful ARM®Cortex®-M3– EEMBC CoreMark®Score: 142– Up to 48-MHz Clock Speed– 128KB of In-System Programmable Flash– 8KB of SRAM for Cache– 20KB of Ultra-Low Leakage SRAM– 2-Pin cJTAG and JTAG Debugging– Supports Over-The-Air Upgrade (OTA)• Ultra-Low Power Sensor Controller– Can Run Autonomous From the Rest of theSystem– 16-Bit Architecture– 2KB of Ultra-Low Leakage SRAM for Code andData• Efficient Code Size Architecture, Placing Drivers,Bluetooth®low energy Controller, IEEE 802.15.4MAC, and Bootloader in ROM• Integrated Antenna• Peripherals– All Digital Peripheral Pins Can Be Routed toAny GPIO– Four General-Purpose Timer Modules (8 × 16-Bit or 4 × 32-Bit Timer, PWM Each)– 12-Bit ADC, 200-ksamples/s, 8-Channel AnalogMUX– Continuous Time Comparator– Ultra-Low Power Analog Comparator– Programmable Current Source– UART– 2 × SSI (SPI, MICROWIRE, TI)– I2C– I2S– Real-Time Clock (RTC)– AES-128 Security Module– True Random Number Generator (TRNG)– 15 GPIOs– Support for Eight Capacitive Sensing Buttons– Integrated Temperature Sensor• External System– On-Chip internal DC-DC Converter– No External Components Needed, Only SupplyVoltage– Version With CC2592 Range Extender Available• Low Power– Wide Supply Voltage Range• Operation from 1.8 to 3.8 V– Active-Mode RX: 6.1 mA– Active-Mode TX at 0 dBm: 6.1 mA– Active-Mode TX at +5 dBm: 9.1 mA– Active-Mode MCU: 61 µA/MHz– Active-Mode MCU: 48.5 CoreMark/mA– Active-Mode Sensor Controller: 8.2 µA/MHz– Standby: 1 µA (RTC Running and RAM/CPURetention)– Shutdown: 100 nA (Wake Up on ExternalEvents)• RF Section– 2.4-GHz RF Transceiver Compatible WithBluetooth low energy (BLE) 4.1 Specificationand IEEE 802.15.4 PHY and MAC– Excellent Receiver Sensitivity (–97 dBm forBluetooth low energy and –100 dBm for802.15.4), Selectivity, and BlockingPerformance– Programmable Output Power up to +5 dBm– Integrated Antenna– Pre-Certified for Compliance With WorldwideRadio Frequency Regulations• ETSI (Europe)• IC (Canada)• FCC (USA)• ARIB STD-T66 (Japan)• Tools and Development Environment– Full-Feature and Low-Cost Development Kits– Multiple Reference Designs for Different RFConfigurations– Packet Sniffer PC Software– Sensor Controller Studio– SmartRF™ Studio– SmartRF Flash Programmer 2– IAR Embedded Workbench®for ARM– Code Composer Studio™
PRODUCTPREVIEW2CC2650MODSWRS187 –AUGUST 2016www.ti.comSubmit Documentation FeedbackProduct Folder Links: CC2650MODDevice Overview Copyright © 2016, Texas Instruments Incorporated1.2 Applications• Consumer Electronics• Mobile Phone Accessories• Sports and Fitness Equipment• HID Applications• Home and Building Automation• Lighting Control• Alarm and Security• Proximity Tags• Medical• Remote Controls• Wireless Sensor Networks(1) For more information, see Section 9,Mechanical Packaging and Orderable Information.1.3 DescriptionThe CC2650MOD device is a SimpleLink™ wireless MCU module that targets Bluetooth Smart, ZigBee®and 6LoWPAN, and ZigBee®RF4CE remote control applications.The module is based on the CC2650 Wireless MCU, a member of the CC26xx family of cost-effective,ultra-low power, 2.4-GHz RF devices. Very low active RF and MCU current and low-power mode currentconsumption provide excellent battery lifetime and allow for operation on small coin cell batteries and inenergy-harvesting applications.The CC2650MOD contains a 32-bit ARM Cortex-M3 processor that runs at 48 MHz as the main processorand a rich peripheral feature set that includes a unique ultra-low power sensor controller. This sensorcontroller is ideal for interfacing external sensors or for collecting analog and digital data autonomouslywhile the rest of the system is in sleep mode. Thus, the CC2650MOD device is ideal for applicationswithin a whole range of products including industrial, consumer electronics, and medical devices.The CC2650MOD is precertified for operation under the regulations of the FCC, IC, ETSI and ARIB.These certifications save significant cost and effort for customers when integrating the module into theirproducts.The Bluetooth low energy controller and the IEEE 802.15.4 MAC are embedded in the ROM and are partlyrunning on a separate ARM®Cortex®-M0 processor. This architecture improves overall systemperformance and power consumption and makes more flash memory available.The Bluetooth Smart and ZigBee stacks are available free of charge from www.ti.com.Device Information(1)PART NUMBER PACKAGE BODY SIZECC2650MODAMOH MOH (Module) 16.90 mm × 11.00 mm
Download:
Mirror Download [FCC.gov]
Document ID3087552
Application IDYE9DwAdSeSpoP495YcBL/g==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize29.21kB (365122 bits)
Date Submitted2016-08-04 00:00:00
Date Available2016-08-17 00:00:00
Creation Date2016-08-03 13:08:30
Producing SoftwareiText 2.1.7 by 1T3XT
Document Lastmod2016-08-03 13:09:49
Document TitleCC2650MOD SimpleLinkâ„¢ Multistandard Wireless MCU Module
Document CreatorTopLeaf 8.0.011
Document Author: Texas Instruments, Incorporated
FCC ID Filing: ZAT26M1

Navigation menu