Texas Instruments ACS6410 Vicinity Card RFID Reader User Manual Installation Guide

Texas Instruments Inc Vicinity Card RFID Reader Installation Guide

Contents

Users Manual 1

11-06-21-713 09/02 Packing List This package includes: Qty. Description 1 S6410 or S6420 Reader with back plate 2 #6 Phillips-head machine mounting screws 2 #6 Phillips-head self-tapping mounting screws 1 Phillips-head cover screw 1 Security-head cover screw 1 Installation guide (this sheet) If any items are missing from the package, please contact the appropriate technical support agent: USA 1-888-937-6536 or 1 (972)-575-4364 Belgium (English) +32 (0)2 7455455 France (English) +33 4 93 22 22 00 Germany +49 (0)8161 80 2200 Italy +39 (0)39 6568 210 Netherlands (English) +31 (0)546 879 222 Spain +34 902 19 73 96 Sweden (English) +46 (0)8 58755527 UK +44 (0)1604 88 4088 or visit us at: www.ti-rfid.com Specifications Reader Model S6410 Wall Plate S6420 Mullion Part number RI-H4R-S6H3-00 RI-H4R-S5H3-00 Operating Frequency 13.56 MHz Supported Protocols ISO/IEC 15693 (Vicinity) Supply Voltage 9 - 14 VDC, built-in overvoltage and reverse polarity protection Power Consumption 90 mA Quiescent, 200 mA Read, 300 mA Max RS-485 Baud Rates 9600, 19200, 38400 (Default) Communication Interface Wiegand 26-64 bit and RS-485 protocol Data Signal Integrity 500 feet Wiegand, 4000 feet RS-485 Data Output Format DES Encryption Mode (Cyper Text), Wiegand UID Mode, Wiegand ASCII mode Operating Temperature -20°C to +70°C Storage Temperature -40°C to +85°C Humidity 90% RH at 70°C Protection Class IP64, Potted Regulatory Approvals FCC, R&TTE (CE), UL-94 and UL-294 (ETL) Overall Dimensions 5.0” x 5.0” x 1.0” (12.7 x 12.7 x 2.5 cm) 5.0” x 1.7” x 1.0” (12.7 x 4.3 x 2.5 cm) Weight ~8.5 oz (~241 g) ~4.8 oz (~136 g) Complete warranty information can be found on the website at: www.ti-rfid.com © Copyright Texas Instruments. 2002 All rights reserved. Before You Begin Determine the installation method, which parts are needed, and which wires will be used. These instructions assume that the unit is being installed on an unprepared flat surface. If this unit is to be installed in an electrical box or door mullion opening, skip to step 3 of the installation instructions. Typical Installation 1. Use appropriate template (from back) to mark hole locations for wire and screws. A set of self-tapping screws is included, however the holes may be pre-drilled if desired. 2. Drill a 3/4” (20 mm) maximum diameter hole for wire to pass through. Placement of this hole is arbitrary, but it must align with the opening of the back plate. 3. Slide wiring cable through mounting plate prior to connecting wires. Be sure the flat side of the plate is toward the wall. 4. Connect wires per the wire guide. Cap any unused wires to prevent shorting. 5. Screw mounting plate onto surface using the appropriate screws provided. 6. Attach the housing to the mounting plate by inserting the upper tab(s) of the housing into the slots in the plate. 7. Secure the front housing using either the included security-head cover screw or the Phillips-head cover screw. 8. Test unit for proper functionality. This can be accomplished by bringing a card into the read field with power applied to the reader. The LED’s and audio should function as desired. Note that this test can only be performed when the unit is in it’s default (Wiegand) mode as shipped. S6410/S6420 Access Control ReaderInstallation Guide* Information submitted for FCC, IndustryCanada, RTTE, CE & ETL certification:A92ACS6410 &A92ACS6420 *
Determining Which Wires Will Be Used The following wire connections are essential for proper functionality in RS-485 or Wiegand mode. Wiegand Mode RS-485 Mode Black Ground Black Ground Red Power Red Power Green Data (0) Gray Data (A or -) White Data (1) Violet Data (B or +) The remaining wires may be connected as desired to customize functionality of the audio and LED indicators. See the S6400 User’s Guide (11-06-21-711) for more information regarding the use of these wires. Complete Wire Guide Color Function Black Ground (GND) Red Power (9-14 VDC) Gray RS-485(A or -) Violet RS-485(B or +) Green Wiegand Data(0) White Wiegand Data(1) Brown Red LED Orange Green LED Yellow Audio Blue Hold Mounting Note: Optimum read range can be achieved by pushing excess wire through opening in wall. Wire accumulated inside reader housing may cause read range to diminish. UP UP3 5/16"(84 mm)Optimum location forcable entry hole.3/4" (20 mm) MAX2 1/8"(54 mm)2 3/8"(60 mm)Allow 1" (25 mm) min.for reader coverWall Plate Template Mullion Template2 1/2" min.(63 mm)2 1/2" min.(63 mm)7/8" min.(22 mm)7/8" min.(22 mm)* Information submitted for FCC, Industry Canada, RTTE, CE& ETL certification: A92ACS6410, A92ACS6420 *

Navigation menu