Texas Instruments TINAVWNA2 TI-Nspire CX Wireless Network Adapter v2 User Manual My

Download:
Mirror Download [FCC.gov]
Document ID	3749796
Application ID	q26dRfev4vEPEIPvBNU/Bw==
Document Description	TempConfidential_TINAVWNA2-UserGuide-Revised3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	377.97kB (4724593 bits)
Date Submitted	2018-02-12 00:00:00
Date Available	2018-08-21 00:00:00
Creation Date	2013-06-07 13:13:24
Producing Software	MadCap Flare V9
Document Lastmod	2013-06-07 13:44:26
Document Title	My Document

Setting up the TI-Nspire™ Navigator™ Teacher
Software
The TI-Nspire™ Navigator™ System provides the hardware and software tools
needed to set up a wireless classroom network. In a wireless classroom
environment, the TI-Nspire™ Navigator™ Teacher Software enables you to:
•
Use Quick Poll to send polls to students, receive student responses, and
review the poll results with students.
•
Use Screen Capture to capture screens from student handhelds or
computers automatically, or at specific time intervals.
•
Use Live Presenter to display work as it is being performed on your
handheld screen, or on a student handheld screen.
•
Use the Review Workspace to collect and review student assignments,
watch results in real time as students answer questions, and analyze data
for the entire class or for individual students.
About the Hardware
Depending on classroom requirements, your TI-Nspire™ Navigator™ System
may include the following hardware, which is used to create a wireless
communications network so that your computer can communicate with student
handhelds:
Hardware
Name
Image
Use
TI-Nspire™
Wireless
Network
Adapter
Attaches to the TI-Nspire™ CX
and TI-Nspire™ CX CAS
handhelds to enable wireless
communication over a 2.4GHz
band.
TI-Nspire™ CX
Wireless
Network
Adapter – v2
Attaches to the TI-Nspire™ CX
and TI-Nspire™ CX CAS
handhelds to enable wireless
communication over a 2.4GHz or
5GHz band.
Setting up the TI-Nspire™ Navigator™ Teacher Software 1
DRAFT
Hardware
Name
Image
Use
TI-Nspire™
Navigator™
wireless cradle
Attaches to all TI-Nspire™ CX
and TI-Nspire™ handhelds to
enable wireless communication
over a 2.4GHz band.
TI-Nspire™
Navigator™
access point
Connects to the teacher
computer to provide a 2.4GHz
wireless communication link.
TI-Nspire™ CX
Navigator™
access point
Connects to the teacher
computer to provide either a
2.4GHz or 5GHz wireless
communication link.
2 Setting up the TI-Nspire™ Navigator™ Teacher Software
DRAFT
Before You Begin
When you launch a new version of the TI-Nspire™ Navigator™ Teacher
Software for the first time, the TI-Nspire™ Navigator™ System Startup wizard
opens and guides you through the automated process to set up your wireless
classroom. Before you begin the wireless set up process:
•
Make sure you have installed and activated the TI-Nspire™ Navigator™
Teacher Software on your computer.
•
If you are using TI-Nspire™ Navigator™ wireless cradles, make sure each
cradle is charged (
LED is solid amber or solid green).
Note: If you are using TI-Nspire™ wireless network adapters, you do not
need to charge them. The wireless network adapters are powered by the
handhelds.
•
Disconnect the TI-Nspire™ Navigator™ access point or TI-Nspire™ CX
Navigator™ access point from your computer.
Automated System Startup
When you launch the software, the Startup wizard will guide you through the
steps needed to:
•
Update all student and classroom handhelds to the latest operating system
(OS) version. The OS on the handhelds must match the software version
installed on your computer.
Important! When updating the OS, handhelds must be connected to the
computer using a USB cable or TI-Nspire™ CX Docking Station.
•
Connect the access point and, if needed, update the access point
firmware.
•
Name the class network.
•
If required, select a channel for the access point.
•
Add wireless clients to your network.
•
Create a backup copy of the class network configuration.
Setting up the TI-Nspire™ Navigator™ Teacher Software 3
DRAFT
Charging the Cradles
The TI-Nspire™ Navigator™ wireless cradles contain rechargeable batteries.
You must charge the batteries overnight before using them in class. When the
cradles are fully charged, they will function all day under continuous use. You
should recharge them each night.
The TI-Nspire™ Navigator™ Cradle Charging Bay can hold from one to five
cradles. After you place the cradles in the charging bay, they are charged
simultaneously until all are fully charged. If the batteries are fully discharged, it
may take up to 12 hours to fully charge the batteries.
Note: You cannot damage the batteries by leaving them in the charging bay
beyond the time needed to fully charge them. Also, it is not necessary to fully
discharge the batteries before recharging them.
Make sure you have enough (3 to 4) power outlets for the equipment you
received. If necessary, obtain a power strip so that you have plenty of grounded
outlets.
1.
Insert the small end of the AC9940 power adapter cord into the charging
bay’s power jack.
4 Setting up the TI-Nspire™ Navigator™ Teacher Software
DRAFT
2.
Plug the other end of the adapter into a power outlet.
3.
Insert each TI-Nspire™ Navigator™ Cradle into the TI-Nspire™ Navigator™
Cradle Charging Bay. Make sure the LED is amber.
Note: You can charge a single wireless cradle using an AC9926 adapter (sold
separately).
Checking the LEDs
Two LEDs (small lights) at the top of each TI-Nspire™ Navigator™ wireless
cradle blink or change colors to indicate various operations or status.
LEDs
The
LED indicates network activity. The
charging status.
LED indicates battery-
When the cradles are still in the TI-Nspire™ Navigator™ Cradle Charging Bay:
•
A solid amber
LED means the wireless cradle is currently recharging.
Setting up the TI-Nspire™ Navigator™ Teacher Software 5
DRAFT
•
A solid red
LED means the wireless cradle does not have good
contact with the charging bay. Reposition the cradle to establish good
contact and the LED turns amber.
•
A solid green
LED means the wireless cradle is fully charged.
Updating the Handheld Operating System
When installing or updating the TI-Nspire™ Navigator™ Teacher Software, the
Startup dialog box opens when you launch the software for the first time. You
must update all student and classroom handhelds to the latest operating
system.
Complete the following steps to ensure all handhelds are updated.
1.
Disconnect the access point if it is connected to your computer.
2.
Connect the handhelds to the computer.
6 Setting up the TI-Nspire™ Navigator™ Teacher Software
DRAFT
You must connect handhelds using a USB cable or connect multiple
handhelds using TI-Nspire™ docking stations.
3.
Click Detect handheld OS .
•
If the OS for all connected handhelds matches the software version,
the Handheld OS Update dialog box is displayed informing you that
all handhelds are up to date. Click Close to return to the Startup dialog
box.
•
If the OS on the connected handhelds is not current, the Handheld
OS Update Required dialog box is displayed. Click Update OS .
The Add to Transfer List dialog box opens.
The matching OS files are transferred to the connected handhelds.
You can update TI-Nspire™ CX handhelds and TI-Nspire™ handhelds
at the same time. If you cannot connect all handhelds at one time,
connect as many as possible and update the OS. After the OS update
is complete, disconnect the handhelds and repeat the OS update
process until all handhelds are updated. The software will detect the
OS needed and begin the transfer as you connect the handhelds.
•
Click Done to stop the transfer process when all handhelds are
updated.
Setting up the TI-Nspire™ Navigator™ Teacher Software 7
DRAFT
-
The Add OS Transfer List closes.
The Start Up dialog box is displayed.
4.
Select the All my handhelds are updated to version 3.6 check box.
5.
Click Next.
The Connect Access Point dialog box opens.
Connecting the TI-Nspire™ Navigator™ Access Point
When the operating system update on all handhelds is complete, the next step
in the system startup process is to connect the access point. When you connect
the access point to your computer, it is powered on and ready to communicate
with wireless network adapters and cradles.
1.
Connect the access point to the computer using a USB cable.
a)
Connect the small end of the USB cable to the access point.
Connect the access point directly to your computer. Do not connect
the access point to a USB hub or docking station.
b)
Connect the other end of the cable to the USB port on your computer.
c)
Make sure the access point power light is on. The power light
indicates that the access point is receiving power from the computer.
The signal light indicates wireless link activity.
8 Setting up the TI-Nspire™ Navigator™ Teacher Software
DRAFT
TI-Nspire™ Navigator™ access point TI-Nspire™ CX Navigator™ access point
Note: If the software does not detect a connected access point within one
minute, an error message is displayed. Close the error message, and then
disconnect and reconnect the access point.
2.
Click Next.
The software detects the access point type and checks the firmware
version on the access point. If a newer firmware version is available, the
software updates the firmware.
Note: It may take up to 60 seconds for the software to detect the access
point.
Important! Do not stop the update process or disconnect the access point
until the firmware update is complete.
When the update is complete, the software checks the access point for a
configured classroom network.
•
If classes exist, the software asks if you want to keep the current setup
or make changes.
•
If no classes exist, the Class Network Setup wizard opens.
Note: You can set up a network at any time, or make edits to an existing
network, by using the Network Manager.
Troubleshooting
If the firmware update fails, the OS Warning dialog box opens.
Setting up the TI-Nspire™ Navigator™ Teacher Software 9
DRAFT
To resolve the problem, disconnect and reconnect any cables connected to the
access point, and the software will automatically start the update process. If this
does not resolve the issue, contact Customer Support.
Confirming Handheld OS Version
If you did not update handhelds during startup, the wizard asks you to confirm
that classroom and student handhelds are updated to the latest OS version.
The OS version on the handhelds must match the software version before you
can set up the class network.
To check the OS version on a handheld,
10 Setting up the TI-Nspire™ Navigator™ Teacher Software
DRAFT
1.
Press c to turn the handheld on.
2.
Select Settings > Status to open the Handheld Status window.
3.
Make sure the OS on the handheld matches the software version on your
computer.
4.
•
If the OS version is current, select Yes.
•
If the OS version is not current select No .
Click Next.
•
If the OS version was not current, the Handheld OS Update Required
dialog box is displayed. Click Update OS to open the Add OS Transfer
Tool and update the handhelds.
•
If the OS version is current, the Class Network Name dialog box opens
and you can continue the process to set up the class network.
Naming the Class Network
When the Class Network Name dialog box opens, complete the following steps
to name your class network.
Setting up the TI-Nspire™ Navigator™ Teacher Software 11
DRAFT
1.
Type the name you want to assign to the class network in the TI-NAV-N
field.
Use a name that is unique, easy to remember, and easy for you to identify.
The class network name can be up to 22 characters long. Names can
consist of letters, numbers, and spaces; but cannot contain special
characters such as ? " $ \ ! [ ] +.
2.
Click Next to configure the access point with no changes.
—or —
3.
Click Advanced to select a different band or operating channel.
•
If the TI-Nspire™ Navigator™ access point
is
connected, you can select a different operating channel.
12 Setting up the TI-Nspire™ Navigator™ Teacher Software
DRAFT
•
If the TI-Nspire™ CX Navigator™ access point
is connected, you
can select either a 2.4GHz band or 5GHz band, and you can select a
different operating channel.
Note: Operating channels available for selection are determined by the
installed software version.
Setting up the TI-Nspire™ Navigator™ Teacher Software 13
DRAFT
Important! If you are using the TI-Nspire™ CX Navigator™ network adapter
– v2 adapters, you can select either the 2.4GHz or 5GHz band. If you have
a mixture of wireless network adapters, you must select the 2.4GHz band.
4.
Click Done .
The Configuring the Access Point dialog box opens and the software
configures the access point and applies the class network name.
Important! Do not disconnect the access point while it is being configured.
14 Setting up the TI-Nspire™ Navigator™ Teacher Software
DRAFT
When the configuration process is complete, you can associate your wireless
clients.
Adding Wireless Clients to the Network
After you assign a name to your class network and the access points are
configured, you must associate your wireless clients (wireless adapters and
wireless cradles) with the network. How you complete this process depends on
whether you have docking stations that enable you to work with multiple
handhelds and wireless clients at one time.
•
If you have a docking station, attach the adapters to the handhelds, and
then insert the handhelds into a docking station that is connected to your
computer. You can link two additional docking stations to the connected
docking station.
•
If you do not have a docking station, attach the wireless adapters or
cradles to the handhelds.
Setting up the TI-Nspire™ Navigator™ Teacher Software 15
DRAFT
1.
When the wireless adapters or cradles are attached to the handhelds, click
Next.
The Add Wireless Clients to Class Network dialog box opens.
The access point finds the available clients and lists them in the Available
Clients box. It can take up to six minutes for the access point to find all
available clients. Check the number of available clients to ensure all
clients are listed.
16 Setting up the TI-Nspire™ Navigator™ Teacher Software
DRAFT
2.
Select the wireless clients you want to add to the class network.
•
To add all available clients listed, click Add All .
•
To add specific clients, select one client ID at a time, and then click
Add .
Important! Clients are not part of the class network until you complete this
step to add them.
3.
Click Next to associate the wireless clients with the classroom network.
Setting up the TI-Nspire™ Navigator™ Teacher Software 17
DRAFT
The software associates the attached wireless clients with the classroom
network. When the process is complete, the Setup Complete dialog opens.
4.
Select Back up my class network to save a copy of your classroom network
configuration.
The saved network information includes the list of wireless client IDs, the
network name, and the channel and country selected on the access point.
Saving a network enables you to reload the configuration at a later time
using the TI-Nspire™ Network Manager. By default, the file is saved in the
My Documents/TI-Nspire/Navigator Network folder.
To finish without saving a backup copy, select Skip backup .
18 Setting up the TI-Nspire™ Navigator™ Teacher Software
DRAFT
5.
Click Finish to complete the TI-Nspire™ Navigator™ System setup.
Note: You can add more wireless adapters or cradles to the class network at a
later time using the TI-Nspire™ Network Manager.
Connecting the Handhelds to the Wireless Adapters
The wireless network adapters work with the TI-Nspire™ CX and TI-Nspire™ CX
CAS handhelds. To connect the handheld to a wireless adapter, follow these
steps.
1.
Position the wireless adapter on top of the handheld so the connector on
the adapter lines up with the connector on top of the handheld.
À
Connector
Á
Guides for aligning with handheld
Â
Grooves to align wireless adapter
2.
Slide the adapter into position, making sure the guides on the sides of the
adapter slide into the grooves on the sides of the handheld.
3.
Firmly press the adapter into place.
Setting up the TI-Nspire™ Navigator™ Teacher Software 19
DRAFT
Connecting the Handhelds to Cradles
The wireless cradles work with the TI-Nspire™, TI-Nspire™ CAS, TI-Nspire™ CX
and TI-Nspire™ CX CAS handhelds. To connect the handheld to a cradle,
follow these steps.
1.
Slide the lock on the back of the cradle to the OFF position.
20 Setting up the TI-Nspire™ Navigator™ Teacher Software
DRAFT
2.
To attach the handheld, face the screen upward and slide the handheld
onto the top of the wireless cradle. Be sure that both sides of the handheld
are inserted into both of the side guides.
3.
Press firmly to make a good connection. When properly connected, the
handheld appears to be sitting on top of the cradle.
4.
Lock the handheld in place by sliding the lock on the back of the cradle to
the ON position.
Setting up the TI-Nspire™ Navigator™ Teacher Software 21
DRAFT
5.
Insert each cradle into the charging bay. Make sure the LED is amber.
22 Setting up the TI-Nspire™ Navigator™ Teacher Software
DRAFT
At the end of the school day, return the wireless cradle to the charging bay and
charge them overnight. The cradles are charged when all the
status) LEDs are solid green or amber.
(power
Creating and Managing Your Teacher Account
Create your teacher account in the Teacher Preferences section of the
TI-Nspire™ Navigator™ Teacher Software. A teacher account lets you log in to
the TI-Nspire™ Navigator™ network from your handheld. After you create a
teacher account, you can later change your password or your user name.
Creating Your Teacher Account
1.
2.
Use the Workspace selector to choose the Class workspace.
Click File > Settings > Teacher Preferences
The Teacher Preferences dialog box opens.
3.
Type a username.
4.
Type a password.
5.
Select or clear the preference for the teacher icon to appear in the
classroom view.
If you select this preference, the teacher icon will appear in the classroom
view, and you will be included as a recipient in Send to Class, Collect from
Class, and Delete from Class operations. The teacher handheld screen
will be included in screen captures of the class.
Setting up the TI-Nspire™ Navigator™ Teacher Software 23
DRAFT
6.
Select or clear the options to randomize the order in Screen Capture, and
to individualize the teacher handheld in Screen Capture.
•
Randomize order in Screen Capture. Selecting this option captures and
displays student screens in a random order, not the order on the class
listing. This enables students to concentrate on the assignment, not
whose screen they are viewing.
•
Individualize Teacher Handheld in Screen Capture. Selecting this option
shows the teacher’s screen in the screen capture.
7.
Click OK .
Changing the Password of Your Teacher Account
1.
Make sure you are not logged in to the TI-Nspire™ Navigator™ network on
your handheld.
2.
Click File > Settings > Teacher Preferences
The Teacher Preferences dialog box opens.
3.
Click Reset.
TI-Nspire™ Navigator™ software clears the current password.
24 Setting up the TI-Nspire™ Navigator™ Teacher Software
DRAFT
4.
Type a new password.
5.
Click OK .
Changing the User Name of Your Teacher Account
1.
Make sure you are not logged in to the TI-Nspire™ Navigator™ network on
your handheld.
2.
Click File > Settings > Teacher Preferences
The Teacher Preferences dialog box opens.
3.
Enter a new user name.
4.
Click OK .
Setting up the TI-Nspire™ Navigator™ Teacher Software 25
DRAFT
Logging In to the TI-Nspire™ Navigator™ System from the
Handheld
The TI-Nspire™ Navigator™ classroom learning system uses both your
computer and student handhelds. For you and your students to communicate
using the TI-Nspire™ Navigator™ network, students must log in to the network
from their handhelds.
Note: You do not have to log in to communicate with student handhelds; you
can use the Transfer Tool to delete files or send files and operating systems to
student handhelds. However, if you plan to participate from your handheld
during the TI-Nspire™ Navigator™ class session, then you must log in to the
TI-Nspire™ Navigator™ network from your handheld.
For more information on using a handheld, refer to the handheld guidebooks
available at education.ti.com/guides.
Before you log in, make sure these items are ready:
•
You have created your teacher account in Teacher Preferences.
•
You have started a class session on your computer.
•
The TI-Nspire™ handheld is ready for login. (The
blinking.)
icon is
Before your students log in, make sure you complete these items:
•
Create student accounts.
•
Provide students with the class network name, their user names and, if
necessary, their passwords.
Logging In to the TI-Nspire™ Navigator™ Network
1.
To log in, do one of the following:
•
From the Home screen of your TI-Nspire™ handheld, select
5:Settings > 5:Login.
•
From a screen other than the Home screen, press ~ > 8:Login .
The last network the wireless client was associated with appears on the
handheld screen.
Note: If the handheld is connected to the computer with the USB cable, no
network names appear on the screen, and you can continue logging in.
26 Setting up the TI-Nspire™ Navigator™ Teacher Software
DRAFT
2.
If the name of the network that appears is correct, continue with login. If the
network is not correct, click Network.
The handheld screens displays all networks it has been connected to, and
also displays other networks within range.
3.
Select the network from the list, and then click Connect.
The login screen shows the connection status and displays the network
name when the connection is successful.
4.
Type your username and password.
5.
Select Login .
The Login Successful screen opens.
6.
Click OK .
Setting up the TI-Nspire™ Navigator™ Teacher Software 27
DRAFT
TI-Nspire™ Handheld Login Status Icons
The icons on the TI-Nspire™ CX, TI-Nspire™ CX CAS, TI-Nspire™, and
TI-Nspire™ CAS handheld screens indicate the communication status between
the handheld and the access point, wireless adapter, wireless cradle, or
TI-Navigator™ network. The icons indicate status as follows.
Icon
Status
No
icon
Meaning
If no icon appears on the handheld, the
handheld is not searching for an access point.
Unattach and reattach the wireless adapter or
cradle.
Blinking
The handheld is searching for an access point.
Solid
The handheld has found an access point.
Solid
The handheld is not communicating with the
adapter or cradle. Remove the handheld from
the adapter or cradle, wait for the icon to
disappear, and then reattach the handheld to
the adapter or cradle.
Blinking
The handheld is connected to the network and
is ready to login.
Solid
The handheld is logged in to the network.
Storing the Wireless Adapters and Cradles
When you charge the handhelds overnight, you can leave the wireless network
adapters attached to the handhelds before placing the handhelds in the
TI-Nspire™ CX Docking Station. When you are ready to use the handhelds the
next morning, the handheld should be fully charged, and the adapter is ready
for use.
You can remove the wireless adapter from the handheld, and store the
adapters in the adapter storage case overnight.
28 Setting up the TI-Nspire™ Navigator™ Teacher Software
DRAFT
If you need to store the wireless adapters for more than two weeks, remove the
wireless adapter from the handheld, and store the adapters in the adapter
storage case. Place the storage case in a cool, dry place.
If you need to store the TI-Nspire™ Navigator™ wireless cradles for more than
two weeks, remove the handhelds from the cradles, and store the cradles in a
cool, dry place. You cannot damage the batteries by leaving them in the
charging bay beyond the time needed to fully charge them, or by leaving them
in the charging bay while the charging bay is unplugged.
Using TI-Nspire™ Network Manager
Accessing the TI-Nspire™ Network Manager
▶
Click Tools > Network Manager.
The TI-Nspire™ Network Manager opens.
Note: Click
window.
Refresh at any time to refresh the TI-Nspire™ Network Manager
Opening the Network Setup Wizard
You can set up or edit a classroom network at any time using the Network
Setup Wizard.
▶
In the TI-Nspire™ Network Manager window, click Network Setup Wizard.
The wizard guides you through the process of setting up a classroom
network, including:
Setting up the TI-Nspire™ Navigator™ Teacher Software 29
DRAFT
•
Update all student and classroom handhelds to the latest operating
system (OS) version. The OS on the handhelds must match the
software version installed on your computer.
•
Connect the access point and, if needed, update the access point
firmware.
•
Name the class network.
•
If required, select a channel for the access point.
•
Add wireless clients to your network.
•
Create a backup copy of the class network configuration.
Checking Network Status
The network status is shown in the side bar of TI-Nspire™ Network Manager
window.
Note: If the sidebar is hidden, click View > Sidebar. Click Refresh to update the
status if the Network Manager is already open.
The network status shows the following information:
•
Access Point. Shows whether the AP is connected or disconnected.
•
Network Name. The name you gave the network when you set it up.
•
Channel. The access point operating channel for the current network.
•
Band. The selected communication link.
•
Firmware. The version of the access point.
•
MAC Address. The Media Access Control address that identifies the access
point.
30 Setting up the TI-Nspire™ Navigator™ Teacher Software
DRAFT
After you have set up the network, all of the adapters or cradles you added
appear in the TI-Nspire™ Network Manager window. If the wireless adapter or
cradle is charged and attached to a TI-Nspire™ handheld that is powered on,
TI-Nspire™ Network Manager shows the status as connected. It may take up to
30 seconds to recognize the wireless client and show its status as connected.
The status window also displays the battery status and signal strength.
If the cradle is not charged, or the adapter or cradle is not connected to a
TI-Nspire™ handheld that is powered on, TI-Nspire™ Network Manager displays
the status as disconnected. TI-Nspire™ Network Manager remembers the
adapter and cradle IDs you added, and the next time you turn on a handheld
that is connected to the adapter or cradle, TI-Nspire™ Network Manager
recognizes it.
Cradle LEDs
The LEDs on each TI-Nspire™ Navigator™ wireless cradle use various colors
and blink patterns to indicate data activity or power status. This can occur either
when the cradles are seated in the charging bay or when they are outside the
charging bay.
The LEDs indicate status as follows.
Activity LED
Color and pattern
Meaning
Blinking green
Indicates data transfer to and from the access point.
Battery (Power Status) LED
Color
and
pattern
Meaning
In the charging bay
Setting up the TI-Nspire™ Navigator™ Teacher Software 31
DRAFT
Color
and
pattern
Meaning
Solid
amber
The battery is charging.
Solid
green
Power on; charged and powered by a charging bay or power
adapter.
Solid
red
The battery is charging, but does not have good contact with the
charging bay. Reposition the cradle so it has good contact. The
LED should then turn amber to indicate it is recharging.
Outside the charging bay
Blinking
green
Power on; battery powered. The battery is 30% to 99% charged.
Blinking
amber
Low battery (less than 30% charged).
Blinking
red
Battery is critically low (less than 8% charged).
Manually Adding Wireless Clients
You can manually add wireless adapters or wireless cradles at any time.
When you add a wireless adapter or cradle manually, it immediately appears in
the TI-Nspire™ Network Manager window.
1.
In the TI-Nspire™ Network Manager window, click Manually Add Wireless
Client(s).
The Add Wireless Clients by ID Number dialog box opens.
32 Setting up the TI-Nspire™ Navigator™ Teacher Software
DRAFT
2.
For each wireless adapter or cradle you are adding, find the ID number on
the back of the adapter or cradle, and type it in the Wireless Client ID box.
The ID is the last six digits of the eight-digit number (ignore the first two
zeros).
3.
Enter a nickname in the Wireless Client Nickname box (optional).
Nicknames can consist of letters, spaces, and numbers. A nickname must
contain a minimum of 1 character and can contain a maximum of 64
characters.
4.
Click Add Next to add another adapter or cradle if you have more than one
wireless client to add.
5.
When you are finished adding all the adapters and cradles, click Finish .
After you manually add wireless clients, you need to associate them to the
network using the handhelds.
6.
Turn on each TI-Nspire™ handheld.
7.
Attach the wireless adapter or the wireless cradle to each handheld. (See
the instructions for connecting wireless adapters or cradles to a TI-Nspire™
handheld.)
8.
From the Home screen of the TI-Nspire™ handheld, select 5:Settings >
6:Network.
The handheld lists the available networks that are within range.
Setting up the TI-Nspire™ Navigator™ Teacher Software 33
DRAFT
9.
Select the network you added the wireless clients to, and click Connect.
The wireless clients are now associated with the access point.
Changing the Operating Channel
1.
In the TI-Nspire™ Network Manager window, click Change Operating
Channels.
The Advanced Access Point Options dialog box opens.
34 Setting up the TI-Nspire™ Navigator™ Teacher Software
DRAFT
Important! If you are using the TI-Nspire™ CX Navigator™ network adapter
– v2 adapters, you can select either the 2.4GHz or 5GHz band. If you have
a mixture of wireless network adapters, you must select the 2.4GHz band.
2.
Select a different channel from the drop-down box.
3.
Click Done .
The Configuring the Access Point dialog box opens and the software
configures the access point.
Saving a Network Setup
Saving a network setup enables you to reload the configuration at a later time
using the TI-Nspire™ Network Manager. The saved network information
includes the list of wireless client IDs, the network name, and the channel and
country selected on the access point. By default, the file is saved in the My
Documents/TI-Nspire/Navigator Network folder.
1.
In the TI-Nspire™ Network Manager window, click Actions > Save Network
Setup .
The Save dialog box opens.
2.
Name the network and then click Save . You can save the file to another
location, if desired.
Reusing a Saved Network
Reusing a saved network enables you to reload the configuration of a saved
network. Reusing a network can save time because you do not have to set up
the network again.
1.
In the TI-Nspire™ Network Manager window, click Actions > Apply Saved
Network Setup .
The Apply a Network dialog box opens.
2.
Select the network and then click Apply a Network.
3.
The access point is configured with the saved network configuration.
Identifying Wireless Clients
To identify wireless clients that are not responding, complete the following
steps.
1.
From the list of hardware components in the TI-Nspire™ Network Manager
window, click to select the wireless clients. To select more than one
Setting up the TI-Nspire™ Navigator™ Teacher Software 35
DRAFT
wireless client, press and hold the Shift or Ctrl key (Mac®: “ key), and
click the items you want to select.
2.
Click Actions > Identify Selected .
3.
Look around your classroom.
•
If you are using cradles, both LEDs on the cradles that you selected
will blink rapidly with a green color.
•
If you are using a docking station, both LEDs on the docking station
will blink rapidly with a green color.
You can identify the wireless clients that are not working because their
LEDs are not blinking.
Now that you know where the non-working wireless clients are, you can add
them to the network again.
Removing Wireless Clients
To remove adapters or cradles from the class network, complete the following
steps.
1.
In the TI-Nspire™ Network Manager window, select the wireless adapters
and cradles that you want to remove from the network.
2.
Click Actions > Removed Selected , or click
3.
When prompted, click Remove .
The selected wireless clients are removed from the list.
Resetting the Access Point to Factory Default Settings
1.
In the TI-Nspire™ Network Manager window, click Actions > Set Default
Factory Settings to Access Point.
The access point is reconfigured to the default factory settings.
2.
Click OK when the confirmation message is displayed.
36 Setting up the TI-Nspire™ Navigator™ Teacher Software
DRAFT
USA FCC Information Concerning Radio
Frequency Interference
Product Name
FCC ID
TI-Nspire™ Navigator™ Wireless Cradle
V7R-TINAVWC2
TI-Nspire™ Navigator™ Access Point
V7R-TINAVAP2
TI-Nspire™ CX Wireless Network Adapter
V7R-TINAVWNA
TI-Nspire™ CX Navigator™ Access Point
V7R-TINAVAP3
TI-Nspire™ CX Navigator™ Wireless Network Adapter – v2
V7R-TINAVWNA2
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: The following products comply with Part 15 of the FCC Rules.
•
TI-Nspire™ CX Wireless Network Adapter
•
TI-Nspire™ CX Wireless Network Adapter – v2
•
TI-Nspire™ Navigator™ Wireless Cradle
•
TI-Nspire™ Navigator™ Access Point
•
TI-Nspire™ CX Navigator™ Access Point
USA FCC Information Concerning Radio Frequency Interference 37
DRAFT
Operation is subject to the following two conditions: (1) These devices may not
cause harmful interference, and (2) these devices must accept any interference
received, including interference that may cause undesired operation.
The device for the band 5150-5250 MHz is only for indoor usage to reduce
potential for harmful interference to co-channel mobile satellite systems.
RF Radiation Exposure and Hazard Statement:
To ensure compliance with Federal Communications Commission (USA)
requirements, (SAR limit is 1.6 W/kg averaged over one gram of tissue), the
products listed in the following table have been evaluated under FCC Bulletin
OET 65C and found to be compliant with the requirements in 47 CFR Part
2.1093 for RF exposure from radio frequency devices. The highest SAR value
reported under this standard during product certification when worn on the
body:
Product Name
SAR Value
TI-Nspire™ Navigator™ Wireless Cradle
0.455W/kg
TI-Nspire™ Navigator™ Access Point
0.995W/kg
TI-Nspire™ CX Wireless Network Adapter
0.944W/kg
TI-Nspire™ CX Navigator™ Access Point
0.433W/kg
TI-Nspire™ CX Navigator™ Wireless Network Adapter – v2
0.685W/kg
Using higher gain antennas and types of antennas not covered under the FCC
certification of this product is not allowed. Installers of the radio and end users
of the product must adhere to the installation instructions provided in this
manual.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Non-modification Statement:
Use only the integral antenna supplied by the manufacturer when operating
these devices. Unauthorized antennas, modifications, or attachments could
damage the TI-Nspire™ Navigator™ Cradle, TI-Nspire™ Navigator™ Access
Point, TI-Nspire™ CX Wireless Network Adapter, TI-Nspire™ CX Navigator™
Access Point, or TI-Nspire™ CX Navigator™ Network Adapter – v2 and violate
FCC regulations. Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this
equipment.
38 USA FCC Information Concerning Radio Frequency Interference
DRAFT
Deployment Statement:
This product is certified for indoor deployment only. Do not install or use this
product outdoors.
FCC Statement
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void the user’s
authority to operate the equipment under FCC rules.
USA FCC Information Concerning Radio Frequency Interference 39
DRAFT
Canadian IC Information
Product Name
IC
TI-Nspire™ Navigator™ Wireless Cradle
451E-TINAVWC2
TI-Nspire™ Navigator™ Access Point
451F-TINAVAP2
TI-Nspire™ CX Wireless Network Adapter
451E-TINAVWNA
TI-Nspire™ CX Navigator™ Access Point
451F-TINAVAP3
TI-Nspire™ CX Navigator™ Wireless Network Adapter – v2 451F-TINAVWNA2
Industry Canada Statement:
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
1.
This device may not cause interference, and
2.
This device must accept any interference, including interference that may
cause undesired operation of the device.
To ensure compliance with Industry Canada requirements, (SAR limit is
1.6 W/kg averaged over one gram of tissue), these products have been
evaluated and found compliant in accordance with Industry Canada RSS102 with respect to the Safety Code 6 for Human Exposure to RF Fields.
The highest SAR value reported under this standard during product
certification when worn on the body:
Product Name
SAR Value
TI-Nspire™ Navigator™ Wireless Cradle
0.455W/kg
TI-Nspire™ Navigator™ Access Point
0.995W/kg
TI-Nspire™ CX Wireless Network Adapter
0.944W/kg
TI-Nspire™ CX Navigator™ Access Point
0.433W/Kg
TI-Nspire™ CX Navigator™ Wireless Network Adapter – v2 0.685W/Kg
Equipment (or its transmit antenna) that is installed outdoors is subject to
licensing and not supported by the listed products.
More information may be found in RSS-102 (
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01904.html) and in Canada’s
40 Canadian IC Information
DRAFT
Safety Code 6 (http://www.hc-sc.gc.ca/ewh-semt/pubs/radiation/radio_
guide-lignes_direct-eng.php).
Under Industry Canada regulations, this radio transmitter may only operate
using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential radio interference to other
users, the antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that necessary for
successful communication.
The device for the band 5150-5250 MHz is only for indoor usage to reduce
potential for harmful interference to co-channel mobile satellite systems.
Industrie Canada Déclaration :
Ce dispositif est conforme à la norme (s) RSS de la licence-exonéré Industrie
Canada. Opération est soumise aux deux conditions suivantes :
1.
Ce dispositif ne peut pas causer de brouillage, et
2.
Ce dispositif doit accepter toute interférence, y compris le brouillage qui
peut causer intempestif de fonctionnement du dispositif.
Pour assurer la conformité avec les exigences d'Industrie Canada, (limite
de Das est de 1,6 W/kg en moyenne pour un gramme de tissu), ces
produits ont été évalués et jugés conformes conformément à Industrie
Canada, CNR-102 en ce qui concerne le Code de sécurité 6 pour
l'exposition humaine aux champs RF. La valeur SAR la plus élevée
signalée en vertu de cette norme lors de la certification du produit lorsqu'il
est porté sur le corps :
Nom du produit
SAR Verdien
TI-Nspire™ Navigator™ Wireless Cradle
0.455W/kg
TI-Nspire™ Navigator™ Access Point
0.995W/kg
TI-Nspire™ CX Wireless Network Adapter
0.944W/kg
TI-Nspire™ CX Navigator™ Access Point
0.433W/Kg
TI-Nspire™ CX Navigator™ Wireless Network Adapter – v2 0.685W/Kg
Équipement (ou son antenne de transmission) qui est installé à l'extérieur est
soumis à licence et pas pris en charge par les produits énumérés.
Canadian IC Information 41
DRAFT
On trouvera plus d'informations dans le CNR-102
(http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01904.html) et dans Code de
sécurité 6 notre (http://www.hc-sc.gc.ca/ewh-semt/pubs/radiation/radio_guidelignes_direct-eng.php).
En vertu de la réglementation d'Industrie Canada, cet émetteur radio risquera
uniquement à l'aide d'une antenne de type et de gain maximum (ou moins)
pour l'émetteur a été approuvé par Industrie Canada. Pour réduire les
interférences radio potentielles à d'autres utilisateurs, le type d'antenne et son
gain doivent être choisie que la puissance isotrope rayonnée équivalente
(p.i.r.e.) n'est pas plus que celui nécessaire à une communication efficace.
Le dispositif pour la bande 5150-5 250 MHz est seulement pour utilisation
intérieure réduire le risque de brouillage préjudiciable aux systèmes mobiles
par satellite dans la même voie.
42 Canadian IC Information
DRAFT
Mexico - Declaration of Conformity
Marking by this symbol:
indicates that the following listed equipment meets the operating conditions
and technical characteristics established in the Mexican Official Standard
NOM-121-SCT1-2009 radio systems using spread spectrum techniquehopping radio equipment frequency and digital modulation operating in the
bands 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz.
•
TI-Nspire™ Navigator™ Access Point
•
TI-Nspire™ Navigator™ Wireless Cradle
•
TI-Nspire™ CX Wireless Network Adapter
•
TI-Nspire™ CX Navigator™ Access Point
Mexico - Declaration of Conformity 43
DRAFT
European Union and EFTA Regulatory
Compliance
This equipment may be operated in the countries that comprise the member
countries of the European Union and the EFTA (European Free Trade
Association). These countries, listed in the following paragraph, are referred to
as The European Community throughout this document:
AUSTRIA, BULGARIA, CZECH REPUBLIC, DENMARK, FINLAND, FRANCE,
GERMANY, GREECE, IRELAND, ITALY, LUXEMBOURG, NETHERLANDS,
NORWAY, PORTUGAL, SLOVAKIA, SLOVENIA, SPAIN, SWEDEN,
SWITZERLAND, UNITED KINGDOM
The TI-Nspire™ Navigator™ Access Point communicates with either a
TI-Nspire™ Navigator™ wireless cradle or TI-Nspire™ CX Wireless Network
Adapter via a wireless 802.11b/g link to provide wireless local area networking
(WLAN) capabilities and with a personal computer using a USB cable.
TI-Nspire™ Navigator™ Access Point includes one 802.11b/g/n radio.
The TI-Nspire™ Navigator™ CX Access Point communicates with either a
TI-Nspire™ Navigator™ wireless cradle, TI-Nspire™ CX Wireless Network
Adapter, or TI-Nspire™ CX Wireless Network Adapter – v2 via a wireless
802.11b/g link to provide wireless local area networking (WLAN) capabilities
and with a personal computer using a USB cable. TI-Nspire™ Navigator
CX Access Point supports 2.412GHz to 2.462GHz for 802.11b/g/n 2.4GHz
operation + 5.150 GHz to 5.250GHz for 802.11 a/n 5GHz operation.
Declaration of Conformity
Marking by this symbol:
indicates compliance with the Essential Requirements of the R&TTE Directive
of the European Union (1999/5/EC).
This equipment meets the following conformance standards:
Safety: EN 60950-1:2006 + A11:2009
EMC: EN 55022:2006, EN 55024:1998 + A1:2001 + A2:2003, N 301 489-1
V1.8.1/2008-4, EN 301 489-17 V2.1.1/2009-5, CISPR22:1997, CISPR24
44 European Union and EFTA Regulatory Compliance
DRAFT
Including: EN 61000-3-2, -3-3, -4-2, -4-3, -4-4, -4-5, -4-6 and -4-11. The product
is also licensed as required for additional country specific standards as
required for the International Marketplace.
Radio: EN 300-328 v.1.7.1 (2006-10)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband
transmission systems; Data transmission equipment operating in the 2,4 GHz
ISM band and using wide band modulation techniques. Certifications are
harmonized to the EN standards covering essential requirements under article
3.2 of the R&TTE Directive. Compliance includes testing with the supplied
integral antenna.
SAR: EN62209-2:2010
European Community Declaration of Conformity
Hereby, Texas Instruments declares that the following products are in
compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC.
•
TI-Nspire™ Navigator™ Access Point
•
TI-Nspire™ Navigator™ Wireless Cradle
•
TI-Nspire™ CX Wireless Network Adapter
•
TI-Nspire™ CX Wireless Network Adapter – v2
•
TI-Nspire™ CX Navigator™ Access Point
English
Hereby, Texas Instruments declares that the TI-Nspire™
Navigator™ Access Point, TI-Nspire™ Navigator™ wireless cradle,
and TI-Nspire™ CX Wireless Network Adapter, TI-Nspire™ CX
Wireless Network Adapter - v2, and TI-Nspire™ CX Navigator™
Access Point are in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC.
The Declaration of Conformity may be consulted in the Product
Stewardship page at education.ti.com .
България
Texas Instruments декларира, че TI-Nspire™ Navigator™ точка
за достъп, безжичен люлка TI-Nspire™ Navigator™ и TI-Nspire™
CX безжична мрежова карта, TI-Nspire™ CX безжична
мрежова карта - v2 и точка за достъп на TI-Nspire™ CX
Navigator™ са в съответствие с основните изисквания и
другите съответни разпоредби на Директива 1999/5/ЕО.
European Union and EFTA Regulatory Compliance 45
DRAFT
Декларацията за съответствие може да бъде консултиран в
страницата на продукта стопанисване в education.ti.com.
Česká
republika
Texas Instruments tímto prohlašuje, že TI-Nspire™ Navigator™
přístupový bod, bezdrátový stojan TI-Nspire™ Navigator™ a
TI-Nspire™ CX bezdrátový síťový adaptér, TI-Nspire™ CX
bezdrátový síťový adaptér - v2 a TI-Nspire™ CX Navigator™
přístupový bod jsou v souladu se základními požadavky a
dalšími příslušnými ustanoveními směrnice 1999/5/ES.
Prohlášení o shodě může být konzultován v na stránce Product
Stewardship education.ti.com .
Dansk
Texas Instruments erklærer hermed, at TI-Nspire™ Navigator™
adgangspunktet, den trådløse TI-Nspire™ Navigator™ holder,
den TI-Nspire™ CX Navigator™ adgangspunktet, den trådløse
TI-Nspire™ CX netværksadapter og den trådløse TI-Nspire™ CX
netværksadapter - v2 er i overensstemmelse med de essentielle
krav og andre relevante bestemmelser i direktiv 1999/5/EF.
Du kan læse overensstemmelseserklæringen på
produktforvaltningssiden på education.ti.com .
Norsk
Texas Instruments erklærer herved at TI-Nspire™ Navigator™
tilgangspunkt, TI-Nspire™ CX Navigator™ tilgangspunkt,
TI-Nspire™ Navigator™ trådløs bordholder, TI-Nspire™ CX
Wireless Network Adapter og TI-Nspire™ CX Wireless Network
Adapter - v2 overholder de vesentlige kravene og andre
relevante bestemmelser i direktivet 1999/5/EC.
Samsvarserklæringen kan leses på siden Produktforvaltning på
education.ti.com .
Suomi
Texas Instruments vakuuttaa, että TI-Nspire™ Navigator™liityntäpiste, TI-Nspire™ CX Navigator™-liityntäpiste, langaton
TI-Nspire™ Navigator™-kelkka, TI-Nspire™ CX Wireless Network
Adapter ja TI-Nspire™ CX Wireless Network Adapter - v2
täyttävät direktiivin 1999/5/EY oleelliset vaatimukset ja ja muut
asianmukaiset ehdot.
Vaatimustenmukaisuusvakuutus on tarkasteltavissa
tuotevastuusivulla osoitteessa education.ti.com .
Français
Texas Instruments déclare que le point d’accès TI-Nspire™
46 European Union and EFTA Regulatory Compliance
DRAFT
Navigator™, le point d’accès TI-Nspire™ CX Navigator™, le socle
de synchronisation TI-Nspire™ Navigator™, l’adaptateur de
réseau sans fil TI-Nspire™ CX et l’adaptateur de réseau sans fil
TI-Nspire™ CX - v2 sont conformes aux exigences essentielles et
aux autres clauses applicables de la Directive 1999/5/CE.
La Déclaration de conformité peut être consultée à la page
Gérance du produit à education.ti.com .
Deutsch
Texas Instruments erklärt hiermit, dass der TI-Nspire™
Navigator™ Zugangspunkt, TI-Nspire™ CX Navigator™
Zugangspunkt, die drahtlose TI-Nspire™ Navigator™
Basisstation, der drahtlose TI-Nspire™ CX Netzwerkadapter
drahtlose und der TI-Nspire™ CX Netzwerkadapter - v2 mit den
wesentlichen Anforderungen und anderen relevanten
Bestimmungen der Richtlinie 1999/5/EG konform sind.
Die Konformitätserklärung kann auf der Seite “Engagement für
die Umwelt” unter education.ti.com angezeigt werden.
Ελλάδα
Με την παρούσα, Texas Instruments δηλώνει ότι το σημείο
πρόσβασης TI-Nspire™ Navigator™, ασύρματο λίκνο πλοηγός
TI-Nspire™ και TI-Nspire™ CX ασύρματο προσαρμογέα δικτύου,
TI-Nspire™ CX ασύρματο προσαρμογέα δικτύου - v2, και σημείο
πρόσβασης TI-Nspire™ CX Navigator™ είναι σύμφωνα με τις
βασικές απαιτήσεις και τις λοιπές σχετικές διατάξεις της οδηγίας
1999/5/εκ.
Δήλωσης συµµόρφωσης μπορούν να συμβουλεύονται στη
σελίδα Διαχείριση προϊόντων στο education.ti.com.
Italiano
Con la presente, Texas Instruments dichiara che il punto di
accesso TI-Nspire™ Navigator™, il punto di accesso TI-Nspire™
CX Navigator™, la base di ricarica wireless TI-Nspire™
Navigator™, la basetta wireless TI-Nspire™ CX e la basetta
wireless TI-Nspire™ CX - v2 sono conformi ai requisiti
fondamentali e ad altri provvedimenti della Direttiva 1999/5/CE.
È possibile consultare la Dichiarazione di conformità alla pagina
Product Stewardship (Gestione responsabile del prodotto),
all’indirizzo education.ti.com .
Nederlands Hierbij verklaart Texas Instruments dat het TI-Nspire™
European Union and EFTA Regulatory Compliance 47
DRAFT
Navigator™ accesspoint, de TI-Nspire™ CX Navigator™
accesspoint, de TI-Nspire™ Navigator™ draadloze slede, de
TI-Nspire™ CX draadloze netwerkadapter en de TI-Nspire™ CX
draadloze netwerkadapter - v2 voldoen aan de essentiële
vereisten en andere relevante bepalingen van Richtlijn
1999/5/EC.
De verklaring van overeenstemming kan worden geraadpleegd
op de pagina Product Stewardship (Productbeheer) op
education.ti.com .
Português
A Texas Instruments declara, pela presente, que o ponto de
acesso TI-Nspire™ Navigator™, o ponto de acesso TI-Nspire™
CX Navigator™, a base sem fios TI-Nspire™ Navigator™, o
adaptador de rede sem fios TI-Nspire™ CX e o adaptador de
rede sem fios TI-Nspire™ CX - v2 estão em conformidade com os
requisitos essenciais e outras disposições relevantes da
Directiva 1999/5/CE.
A Declaração de Conformidade pode ser consultada na página
Administração do Produto em education.ti.com .
Español
Mediante el presente documento, Texas Instruments declara
que el punto de acceso TI-Nspire™ Navigator™, el punto de
acceso TI-Nspire™ Navigator™ CX, el soporte inalámbrico
TI-Nspire™ Navigator™, el adaptador de red inalámbrica
TI-Nspire™ CX y el el adaptador de red inalámbrica TI-Nspire™
CX - v2 cumplen con los requisitos esenciales y otras
disposiciones relevantes de la directiva 1999/5/CE.
Puede consultar la declaración de conformidad en la página
Administración de producto en education.ti.com .
Svenska
Texas Instruments deklarerar härmed att TI-Nspire™ Navigator™
anslutningspunkt, TI-Nspire™ CX Navigator™ anslutningspunkt,
TI-Nspire™ Navigator™ trådlös tillkopplingsenhet, TI-Nspire™ CX
trådlös nätverksadapter och TI-Nspire™ CX trådlös
nätverksadapter - v2 uppfyller de väsentliga kraven och övriga
relevanta bestämmelser enligt direktivet 1999/5/EG.
Deklarationen om överensstämmelse kan läsas på sidan
Produktansvar på webbplatsen education.ti.com .
48 European Union and EFTA Regulatory Compliance
DRAFT
Slovensko
Texas Instruments vyhlasuje, že TI-Nspire™ Navigator™ Access
Point, bezdrôtový kolísky TI-Nspire™ Navigator™ a TI-Nspire™ CX
bezdrôtový sieťový adaptér, TI-Nspire™ CX bezdrôtový sieťový
adaptér - v2 a TI-Nspire™ CX Navigator™ prístupový bod sú v
súlade so základnými požiadavkami a inými príslušnými
ustanoveniami smernice 1999/5/EC.
Vyhlásenie o zhode k nahliadnutiu na stránke produktu
správcovstvo v education.ti.com.
Slovenija
Texas Instruments izjavlja, da TI-Nspire™ Navigator™ dostopno
točko, TI-Nspire™ Navigator™ wireless zibelka in TI-Nspire™ CX
brezžično omrežno kartico, TI-Nspire™ CX brezžično omrežno
kartico - v2 in TI-Nspire™ CX Navigator™ vstopne točke so v
skladu z bistvenimi zahtevami in drugimi ustreznimi doloèbami
Direktive 1999/5/ES.
Izjava o skladnosti se lahko posvetuje nadzor izdelkov na strani
education.ti.com.
Countries of Operation and Restrictions of Use in the European
Community
Operation Using the 2.400 to 2.4835 GHz Channels in the European
Community
The installer and/or end user should use the configuration utility provided with
this product to verify the current channel of operation, the expected transmit
power level, and to confirm that the device is operating in conformance with the
spectrum usage rules for the selected European Community country. If
operation is occurring outside of the allowable channels as indicated in this
guide, then operation of the product must cease immediately and the installer
must consult with the local technical support staff responsible for the wireless
network.
These devices are intended to be operated in all countries of the European
Community. The frequencies associated with channels 1 to 13 in the 2.400 to
2.4835 GHz band are allowed to be used either indoors or outdoors in all
countries of the European Community, except where noted:
•
In Greece, Italy, Latvia, and Spain, the end-user must apply for a license
from the national spectrum authority to operate this device outdoors.
European Union and EFTA Regulatory Compliance 49
DRAFT
•
Please consult the TI-Nspire™ Navigator™ Teacher Software Guidebook for
further information regarding restrictions and operating conditions for
outdoor configurations.
50 European Union and EFTA Regulatory Compliance
DRAFT
China SRRC CMIIT Identification
Product Name
CMIIT ID
TI-Nspire™ Navigator™ Wireless Cradle
2010DJ5746
TI-Nspire™ Navigator™ Access Point
2012DJ1441
TI-Nspire™ CX Wireless Network Adapter
2011DJ1546
TI-Nspire™ CX Navigator™ Access Point
TBD
TI-Nspire™ CX Navigator™ Wireless Network Adapter – v2
TBD
China SRRC CMIIT Identification 51
DRAFT
Warning Statements
Warning! Install the TI-Nspire™ Navigator™ Access Point or TI-Nspire™ CX
Navigator™ Access Point in such a manner as to maintain a minimum of 20 cm
(7.9 inches) separation distance between the radiating element(s) and all
persons. This safety warning conforms to FCC radio frequency exposure limits.
Warning! Do not touch or move the TI-Nspire™ Navigator™ Access Point or or
TI-Nspire™ CX Navigator™ Access Point when the antennas are transmitting or
receiving.
Warning! The TI-Nspire™ Navigator™ Access Point, TI-Nspire™ Navigator™
Wireless Cradle, TI-Nspire™ CX Wireless Network Adapter, TI-Nspire™ CX
Navigator™ Access Point, and TI-Nspire™ CX Wireless Network Adapter - v2
are intended for indoor use only. Do not install the device nor operate it
outdoors.
Warning! Intentional radiators, such as the TI-Nspire™ Navigator™ Access
Point, TI-Nspire™ Navigator™ Wireless Cradle, TI-Nspire™ CX Wireless Network
Adapter. TI-Nspire™ CX Navigator™ Access Point, and TI-Nspire™ CX Wireless
Network Adapter - v2are not intended to be operated with any antenna(s) other
than those furnished by Texas Instruments. An intentional radiator may only be
operated with the antenna(s) with which it is authorized.
Warning! The TI-Nspire™ Navigator™ Access Point radio(s) and TI-Nspire™ CX
Navigator™ Access Point radio(s) are disabled by default and can be enabled
only by the system administrator using the Management software application.
Warning! The radio frequency band, operating channels, and transmit power
depend on the country of operation specified by the system administrator
during setup and configuration using the Management software.
Warning! Only qualified personnel must perform installation. Read and follow
all warning notices and instructions marked on the product or included in the
documentation
52 Warning Statements
DRAFT
Important for Safe AC Adapter Operation
In addition to the careful attention devoted to quality standards in the
manufacture of your TI product, safety is a major factor in the design of every
product. However, safety is your responsibility as well. This section lists
important information that will help assure your enjoyment and proper use of
this TI product and accessory equipment. Please read it carefully before
operating and using your product.
Installation
•
Read and follow Instructions: You should read all the safety and operating
instructions before operating the product. Follow all operating instructions.
•
Retain Instructions: You should save all the safety and operating
instructions for future reference.
•
Heed Warnings: Comply with all warnings on the product and in the
operating instructions.
•
Use the Recommended AC adapter: You must use the adapter that comes
with your product.
•
Check Power Sources: The AC adapter for your TI product must be used
with an AC100V-230V 50Hz/60Hz supply outlet. If you are not sure of the
type of power supplied to your home, consult your dealer or local power
company.
•
Be Careful of Overloading: Do not overload wall outlets or extension cords,
as this can result in a risk of fire or electric shock. Overloaded AC outlets,
extension cords, frayed power cords, damaged or cracked wire insulation,
and broken plugs are dangerous. Periodically examine the cord, and if its
appearance indicates damage or deteriorated insulation, have it replaced
by your service technician.
•
Protect Power Cords: Route power supply cords so that they are not likely
to be walked on or pinched by items placed upon or against them. Pay
particular attention to cords where they are attached to plugs and
convenience receptacles, and examine the point where the power cord
attaches to the TI product.
•
Check Ventilation: Slots and openings in the enclosure are provided for
ventilation to ensure reliable operation of the TI product and to protect it
from overheating. Do not block or cover these openings. Never block these
openings by placing the TI product on a bed, sofa, rug, or other similar
Important for Safe AC Adapter Operation
DRAFT
53
surface. Never place the TI product near or over a radiator or heat register,
or any other head source (including amplifiers). Do not place the TI
product in a built-in installation, such as a bookcase or equipment rack,
unless you provide proper ventilation.
•
Do Not Use Accessories: Do not use attachments, unless they are
recommended by TI, as they may cause electrical or fire hazards.
•
Do Not Use Near Water: Do not use the TI product near water; for example,
near a bathtub, sink or laundry tub, in a wet basement or near a swimming
pool.
•
Do Not Place Near a High Temperature Source: Do not use the TI product
near a source of heat such as a kitchen range, a fireplace, or a radiator.
•
Use Caution in Mounting the TI Product: Do not place the TI product on an
unstable surface. The TI product may fall, causing serious injury to a child
or adult, as well as serious damage to the TI product.
•
Do Not Use Near Medical Equipment: Do not operate the product near
equipment that is susceptible to electrical interference, or is used for
medical purposes. Do not use the product near a pacemaker or a patient
care area in a hospital.
Important Information
•
Wait at least 10 seconds between disconnecting and reconnecting the TI
product with the AC power adapter.
•
Unplug the product from the wall outlet carefully, as the AC adapter may
be hot.
Use and Maintenance
•
Unplug Power Before Cleaning: Do not used liquid or aerosol cleaners.
Use a damp cloth for cleaning.
•
Keep Objects Out of Openings: Never push objects of any kind into the TI
product through openings such as the ventilation holes, as they may touch
high voltage circuits and "short out" parts, which could result in a fire or
electric shock. Never spill liquid on the TI product.
•
Protect From Lightning: Unplug the TI product during a lightning storm, or
when leaving it unattended and unused for a long period. Remove the
power adapter from the wall outlet, and disconnect the cable system. This
will prevent damage to the TI product due to lightning and power line
surges. Take care not to touch the metal portion of the TI product or cables
in a lightning storm.
54 Important for Safe AC Adapter Operation
DRAFT
Service
•
•
Refer Servicing to Qualified Service Personnel under the Conditions
Listed Below:
If the power supply cord or plug is damaged.
If liquid has been spilled or objects have fallen into the product.
If the product has been exposed to rain or water.
If the product does not operate normally as per the operating
instructions.
If the product has been dropped or the case has been damaged.
When the product exhibits a distinct change in operation, such as the
inability to complete its self-check.
Require Safety Check: Upon completion of any service or repairs to the
product, ask the service technician to perform the recommended safety
checks to verify that the product is in a safe operating condition.
Important for Safe AC Adapter Operation
DRAFT
55

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : 
Create Date                     : 2013:06:07 13:13:24-05:00
Modify Date                     : 2013:06:07 13:44:26-05:00
Subject                         : 
Has XFA                         : No
Language                        : en-us
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : 
Description                     : 
Title                           : My Document
Metadata Date                   : 2013:06:07 13:44:26-05:00
Keywords                        : 
Producer                        : MadCap Flare V9
Document ID                     : uuid:96ce1454-9f23-458e-8459-a0742cd4c7be
Instance ID                     : uuid:d5102466-045f-4a8c-88ed-ade19f4b8fea
Page Mode                       : UseOutlines
Page Count                      : 55

EXIF Metadata provided by EXIF.tools