Thales e Transactions DATATAC001 Artema DataTAC POS Terminal User Manual covers

Thales e-Transactions, Inc. Artema DataTAC POS Terminal covers

ex9 manual

July 2001 APREL Project No.: Consulting * Research * Training * Certification Testing Since 1981FCC ID: PSMDATATAC001Exhibit 9User’s Manual
July 24, 2001E-TRANSACTIONS, INC.ARTEMA DataTACInstallation Manual
Revision 1.0 ARTEMA DataTAC 1Installation ManualTHIS INFORMATION IS PROPRIETARY INFORMATION OF THALESe-TRANSACTIONS AND MAY NOT BE USED, COPIED, DISCLOSEDOR DIVULGED, IN WHOLE OR IN PART, FOR ANY PURPOSE BYANY PERSON WITHOUT THE WRITTEN APPROVAL OF THALESe-TRANSACTIONS INC.E-TRANSACTIONS, INC.Table of contents1FCC STATEMENT............................................................................................................................................ 22SAFETY ............................................................................................................................................................... 32.1 LITHIUM BATTERIES ......................................................................................................................................... 32.2 SAFETY INFORMATION ..................................................................................................................................... 33ARTEMA OVERVIEW..................................................................................................................................... 44INSTALLATION AND CONNECTIONS...................................................................................................... 54.1 ENVIRONMENT.................................................................................................................................................. 54.2 BATTERY PACK INSTALLATION........................................................................................................................ 64.3 INSTALLING THE PAPER ROLL........................................................................................................................... 64.4 CONNECTING TO THE POWER SUPPLY.............................................................................................................. 84.5 CHARGING THE ARTEMA.............................................................................................................................. 85TROUBLE SHOOTING & SPARE SPARTS ............................................................................................... 96TECHNICAL SPECIFICATIONS................................................................................................................106.1 HANDSET SPECIFICATIONS .............................................................................................................................10
Revision 1.0 ARTEMA DataTAC 2Installation ManualTHIS INFORMATION IS PROPRIETARY INFORMATION OF THALESe-TRANSACTIONS AND MAY NOT BE USED, COPIED, DISCLOSEDOR DIVULGED, IN WHOLE OR IN PART, FOR ANY PURPOSE BYANY PERSON WITHOUT THE WRITTEN APPROVAL OF THALESe-TRANSACTIONS INC.E-TRANSACTIONS, INC.1 FCC STATEMENTWarning: Changes or modifications to this unit not expressly approved by Thales e-Transactions could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for aClass A digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference when theequipment is operated in a commercial installation. This equipment generates, usesand can radiate radio frequency energy and, if not installed and used in accordancewith the instruction manual, may cause harmful interference to radiocommunications.However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the followingmeasures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Plug the equipment into an outlet on a circuit different from the one currentlybeing used.- Consult the dealer or an experienced radio/TV technician for help.Warning: To prevent fire or shock hazard, and damage to your unit, do not exposethis terminal to rain or moisture.WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVECOVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFERSERVICING TO QUALIFIED SERVICE PERSONNEL.For your permanent records, we urge you to record the serial number of yourterminal in the space provided below. The serial number is located on the labelwhich can be found on the bottom of the unit.Terminal Serial Number:
Revision 1.0 ARTEMA DataTAC 3Installation ManualTHIS INFORMATION IS PROPRIETARY INFORMATION OF THALESe-TRANSACTIONS AND MAY NOT BE USED, COPIED, DISCLOSEDOR DIVULGED, IN WHOLE OR IN PART, FOR ANY PURPOSE BYANY PERSON WITHOUT THE WRITTEN APPROVAL OF THALESe-TRANSACTIONS INC.E-TRANSACTIONS, INC.2 SAFETY2.1 Lithium batteriesIn addition to the battery pack that powers the handset, Artema uses Lithiumbatteries in order to backup internal data. The Lithium batteries in normal usageconditions have a 6 year life expectancy. These batteries should only be replaced byan approved service center.CAUTIONDanger of explosion if battery is incorrectly replaced.Replace only with the same or equivalent typerecommended by the manufacturer.Dispose of used batteries accordingto the manufacturer’s instructions.2.2 Safety InformationAll Terminals:• Avoid immersing the device in waterRF and DataTAC Terminals:• Turn off the terminal in any area where radio transmissions are prohibitted(such as fuel storage areas)• Not intended to be used in a moving vehicle (may interfere with electronic fuelinjection, electronic anti-skid brakes, and electronic cruise control systems)• May interfere with the functionality of inadequately protected medical devices,including pacemakers (consult with physician or device manufacturer if youhave any questions)• Do not use with a broken antennaWarning: To comply with the FCC RF exposure requirements, this unit must beoperated with a minimum separation distance of 1 inch (2.4 cm) between theantenna and a person's body.Artema is an electrical device. It must be used under normalconditions as described in this manual.DO NOT OPEN THIS DEVICE. This device contains no userserviceable parts. Service by non-authorized personnel may void thewarranty and could damage the unit and/or create a hazard.
Revision 1.0 ARTEMA DataTAC 4Installation ManualTHIS INFORMATION IS PROPRIETARY INFORMATION OF THALESe-TRANSACTIONS AND MAY NOT BE USED, COPIED, DISCLOSEDOR DIVULGED, IN WHOLE OR IN PART, FOR ANY PURPOSE BYANY PERSON WITHOUT THE WRITTEN APPROVAL OF THALESe-TRANSACTIONS INC.E-TRANSACTIONS, INC.3 ARTEMA OVERVIEW
Revision 1.0 ARTEMA DataTAC 5Installation ManualTHIS INFORMATION IS PROPRIETARY INFORMATION OF THALESe-TRANSACTIONS AND MAY NOT BE USED, COPIED, DISCLOSEDOR DIVULGED, IN WHOLE OR IN PART, FOR ANY PURPOSE BYANY PERSON WITHOUT THE WRITTEN APPROVAL OF THALESe-TRANSACTIONS INC.E-TRANSACTIONS, INC.4 INSTALLATION AND CONNECTIONS4.1 EnvironmentIn order to use Artema in optimal conditions- Place the base on a clear, flat, leveled surface, close to the electrical outlet.- Place the terminal away from excessive heat sources, vibrations, dust, water andstrong radio sources.Environmental conditionsMinimum MaximumOperating temperature +41 °F (+5 °C) +104 °F (+40 °C)Storage temperature -13 °F (-25 °C) +131 °F (+55 °C)Relative humidity 50% 90%
Revision 1.0 ARTEMA DataTAC 6Installation ManualTHIS INFORMATION IS PROPRIETARY INFORMATION OF THALESe-TRANSACTIONS AND MAY NOT BE USED, COPIED, DISCLOSEDOR DIVULGED, IN WHOLE OR IN PART, FOR ANY PURPOSE BYANY PERSON WITHOUT THE WRITTEN APPROVAL OF THALESe-TRANSACTIONS INC.E-TRANSACTIONS, INC.4.2 Battery pack installation- It is important to switch off the terminal before changing the battery pack.- Position the battery pack in the back of the handset.- Press on the upper part of the battery until a "click" noise is heard.- The terminal is ready for the charging cycle (see installation and connection).4.3 Installing the paper rollTo obtain the highest printing quality, and to ensure maximum printer life span, onlyuse recommended paper rolls. (2 ¼” x 7/8” x 80’)- Open the printer casing by pressing simultaneously on both sides, and by pullingupwards.
Revision 1.0 ARTEMA DataTAC 7Installation ManualTHIS INFORMATION IS PROPRIETARY INFORMATION OF THALESe-TRANSACTIONS AND MAY NOT BE USED, COPIED, DISCLOSEDOR DIVULGED, IN WHOLE OR IN PART, FOR ANY PURPOSE BYANY PERSON WITHOUT THE WRITTEN APPROVAL OF THALESe-TRANSACTIONS INC.E-TRANSACTIONS, INC.- Place the roll of paper in the casing, paper output towards the pin pad. Leave afew inches of paper outside.- Close the printer casing. You will hear a "click" sound to confirm the casing isclosed.
Revision 1.0 ARTEMA DataTAC 8Installation ManualTHIS INFORMATION IS PROPRIETARY INFORMATION OF THALESe-TRANSACTIONS AND MAY NOT BE USED, COPIED, DISCLOSEDOR DIVULGED, IN WHOLE OR IN PART, FOR ANY PURPOSE BYANY PERSON WITHOUT THE WRITTEN APPROVAL OF THALESe-TRANSACTIONS INC.E-TRANSACTIONS, INC.- The printer will work only if the casing is closed.- Switch on the terminal, by pressing the "OK" key, and draw an inch of paper tocheck that the roll is correctly placed in its casing.- Tear off the excess paper by pulling the paper towards the front of the terminal.4.4 Connecting to the power supply- Plug the base power cord into a wall outlet (115V), and verify that the greenindicator light on the base is lit.The outlet needs to be close to the terminal and within reach, in order to bequickly disconnected, if necessary.4.5 Charging The ARTEMABefore using Artema for the first time, leave the handset on the base and let itcharge for 8 hours in order to fully charge the battery pack.- After a charging cycle, an icon on the terminal indicates the battery charge level- In order for you to run a large number of transactions without the base- We recommend that you change battery packs every two years.- Use only Thales certified battery packs.
Revision 1.0 ARTEMA DataTAC 9Installation ManualTHIS INFORMATION IS PROPRIETARY INFORMATION OF THALESe-TRANSACTIONS AND MAY NOT BE USED, COPIED, DISCLOSEDOR DIVULGED, IN WHOLE OR IN PART, FOR ANY PURPOSE BYANY PERSON WITHOUT THE WRITTEN APPROVAL OF THALESe-TRANSACTIONS INC.E-TRANSACTIONS, INC.5 TROUBLE SHOOTING & SPARE SPARTSTechnical maintenance operations should only be done by approved servicingcenters.However some problems can easily be solved:Artema stops during display or printing:- Recharge the battery by placing the handset on the base for several hours.- Check that the battery is correctly inserted into the handset.- Check that the paper cover is completely closed.The paper roll gets jammed:- Check that the paper roll is positioned correctly.- Check that the paper cover is completely closed.Spare partsTo obtain extra batteries and paper rolls, contact Thales e-Transactions (toll free) at(888) 710-0100.
Revision 1.0 ARTEMA DataTAC 10Installation ManualTHIS INFORMATION IS PROPRIETARY INFORMATION OF THALESe-TRANSACTIONS AND MAY NOT BE USED, COPIED, DISCLOSEDOR DIVULGED, IN WHOLE OR IN PART, FOR ANY PURPOSE BYANY PERSON WITHOUT THE WRITTEN APPROVAL OF THALESe-TRANSACTIONS INC.E-TRANSACTIONS, INC.6 TECHNICAL SPECIFICATIONS6.1 Handset specificationsWeightSize 23.9 oz (680 g)8.57 x 3.2 x 2.3 in (243 x 90 x 65 mm)Printer Thermal printerDisplay Liquid Crystal Graphical, Back lit 40 x 132Pin pad 11 alpha numeric keys, 3 navigation keys,3 dedicated keys: CLR, CAN, ENTCard readers Magnetic stripe card readerISO2 and ISO3 or ISO2 and ISO1Optional smart card reader 8 or 16contactsISO 7816 smart card readers : 2 or 4optional SAM modulesCentral Processing Unit 32 bits RISC processor, 256 KB RAM1 MB Flash memoryPower supply Removable battery packCharging time:2 hours for 60% of capacity8 hours for a full chargeAutonomy Over 80 transactions
Revision 1.0 ARTEMA DataTAC 11Installation ManualTHIS INFORMATION IS PROPRIETARY INFORMATION OF THALESe-TRANSACTIONS AND MAY NOT BE USED, COPIED, DISCLOSEDOR DIVULGED, IN WHOLE OR IN PART, FOR ANY PURPOSE BYANY PERSON WITHOUT THE WRITTEN APPROVAL OF THALESe-TRANSACTIONS INC. E-TRANSACTIONS, INC.Notes

Navigation menu