Thales e Transactions DATATAC001 Artema DataTAC POS Terminal User Manual covers
Thales e-Transactions, Inc. Artema DataTAC POS Terminal covers
ex9 manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 169402 |
| Application ID | USDJqoa/me1PAuUdEWOsbg== |
| Document Description | ex9 manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 27.58kB (344808 bits) |
| Date Submitted | 2001-09-13 00:00:00 |
| Date Available | 2001-11-09 00:00:00 |
| Creation Date | 2001-08-22 14:15:05 |
| Producing Software | Acrobat PDFWriter 4.0 for Windows |
| Document Lastmod | 2001-08-24 15:44:30 |
| Document Title | covers.PDF |
| Document Creator | Microsoft Word |
| Document Author: | artb |
Consulting * Research * Training * Certification Testing Since 1981 FCC ID: PSMDATATAC001 Exhibit 9 User’s Manual July 2001 APREL Project No.: E-TRANSACTIONS, INC. ARTEMA DataTAC Installation Manual July 24, 2001 Revision 1.0 ARTEMA DataTAC Installation Manual Table of contents FCC STATEMENT............................................................................................................................................ 2 SAFETY ............................................................................................................................................................... 3 2.1 2.2 LITHIUM BATTERIES ......................................................................................................................................... 3 SAFETY INFORMATION ..................................................................................................................................... 3 ARTEMA OVERVIEW..................................................................................................................................... 4 INSTALLATION AND CONNECTIONS...................................................................................................... 5 4.1 4.2 4.3 4.4 4.5 ENVIRONMENT.................................................................................................................................................. 5 BATTERY PACK INSTALLATION ........................................................................................................................ 6 INSTALLING THE PAPER ROLL........................................................................................................................... 6 CONNECTING TO THE POWER SUPPLY .............................................................................................................. 8 CHARGING THE ARTEMA .............................................................................................................................. 8 TROUBLE SHOOTING & SPARE SPARTS ............................................................................................... 9 TECHNICAL SPECIFICATIONS................................................................................................................ 10 6.1 HANDSET SPECIFICATIONS ............................................................................................................................. 10 THIS INFORMATION IS PROPRIETARY INFORMATION OF THALES e-TRANSACTIONS AND MAY NOT BE USED, COPIED, DISCLOSED OR DIVULGED, IN WHOLE OR IN PART, FOR ANY PURPOSE BY ANY PERSON WITHOUT THE WRITTEN APPROVAL OF THALES e-TRANSACTIONS INC. E-TRANSACTIONS, INC. Revision 1.0 ARTEMA DataTAC Installation Manual 1 FCC STATEMENT Warning: Changes or modifications to this unit not expressly approved by Thales eTransactions could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Plug the equipment into an outlet on a circuit different from the one currently being used. - Consult the dealer or an experienced radio/TV technician for help. Warning: To prevent fire or shock hazard, and damage to your unit, do not expose this terminal to rain or moisture. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. For your permanent records, we urge you to record the serial number of your terminal in the space provided below. The serial number is located on the label which can be found on the bottom of the unit. Terminal Serial Number: THIS INFORMATION IS PROPRIETARY INFORMATION OF THALES e-TRANSACTIONS AND MAY NOT BE USED, COPIED, DISCLOSED OR DIVULGED, IN WHOLE OR IN PART, FOR ANY PURPOSE BY ANY PERSON WITHOUT THE WRITTEN APPROVAL OF THALES e-TRANSACTIONS INC. E-TRANSACTIONS, INC. Revision 1.0 ARTEMA DataTAC Installation Manual 2 SAFETY 2.1 Lithium batteries In addition to the battery pack that powers the handset, Artema uses Lithium batteries in order to backup internal data. The Lithium batteries in normal usage conditions have a 6 year life expectancy. These batteries should only be replaced by an approved service center. CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. 2.2 Safety Information All Terminals: • Avoid immersing the device in water RF and DataTAC Terminals: • Turn off the terminal in any area where radio transmissions are prohibitted (such as fuel storage areas) • Not intended to be used in a moving vehicle (may interfere with electronic fuel injection, electronic anti-skid brakes, and electronic cruise control systems) • May interfere with the functionality of inadequately protected medical devices, including pacemakers (consult with physician or device manufacturer if you have any questions) • Do not use with a broken antenna Warning: To comply with the FCC RF exposure requirements, this unit must be operated with a minimum separation distance of 1 inch (2.4 cm) between the antenna and a person's body. Artema is an electrical device. It must be used under normal conditions as described in this manual. DO NOT OPEN THIS DEVICE. This device contains no user serviceable parts. Service by non-authorized personnel may void the warranty and could damage the unit and/or create a hazard. THIS INFORMATION IS PROPRIETARY INFORMATION OF THALES e-TRANSACTIONS AND MAY NOT BE USED, COPIED, DISCLOSED OR DIVULGED, IN WHOLE OR IN PART, FOR ANY PURPOSE BY ANY PERSON WITHOUT THE WRITTEN APPROVAL OF THALES e-TRANSACTIONS INC. E-TRANSACTIONS, INC. Revision 1.0 ARTEMA DataTAC Installation Manual 3 ARTEMA OVERVIEW THIS INFORMATION IS PROPRIETARY INFORMATION OF THALES e-TRANSACTIONS AND MAY NOT BE USED, COPIED, DISCLOSED OR DIVULGED, IN WHOLE OR IN PART, FOR ANY PURPOSE BY ANY PERSON WITHOUT THE WRITTEN APPROVAL OF THALES e-TRANSACTIONS INC. E-TRANSACTIONS, INC. Revision 1.0 ARTEMA DataTAC Installation Manual 4 INSTALLATION AND CONNECTIONS 4.1 Environment In order to use Artema in optimal conditions - Place the base on a clear, flat, leveled surface, close to the electrical outlet. - Place the terminal away from excessive heat sources, vibrations, dust, water and strong radio sources. Environmental conditions Operating temperature Storage temperature Relative humidity Minimum +41 °F (+5 °C) -13 °F (-25 °C) 50% Maximum +104 °F (+40 °C) +131 °F (+55 °C) 90% THIS INFORMATION IS PROPRIETARY INFORMATION OF THALES e-TRANSACTIONS AND MAY NOT BE USED, COPIED, DISCLOSED OR DIVULGED, IN WHOLE OR IN PART, FOR ANY PURPOSE BY ANY PERSON WITHOUT THE WRITTEN APPROVAL OF THALES e-TRANSACTIONS INC. E-TRANSACTIONS, INC. Revision 1.0 4.2 ARTEMA DataTAC Installation Manual Battery pack installation It is important to switch off the terminal before changing the battery pack. Position the battery pack in the back of the handset. Press on the upper part of the battery until a "click" noise is heard. The terminal is ready for the charging cycle (see installation and connection). 4.3 Installing the paper roll To obtain the highest printing quality, and to ensure maximum printer life span, only use recommended paper rolls. (2 ¼” x 7/8” x 80’) Open the printer casing by pressing simultaneously on both sides, and by pulling upwards. THIS INFORMATION IS PROPRIETARY INFORMATION OF THALES e-TRANSACTIONS AND MAY NOT BE USED, COPIED, DISCLOSED OR DIVULGED, IN WHOLE OR IN PART, FOR ANY PURPOSE BY ANY PERSON WITHOUT THE WRITTEN APPROVAL OF THALES e-TRANSACTIONS INC. E-TRANSACTIONS, INC. Revision 1.0 ARTEMA DataTAC Installation Manual Place the roll of paper in the casing, paper output towards the pin pad. Leave a few inches of paper outside. Close the printer casing. You will hear a "click" sound to confirm the casing is closed. THIS INFORMATION IS PROPRIETARY INFORMATION OF THALES e-TRANSACTIONS AND MAY NOT BE USED, COPIED, DISCLOSED OR DIVULGED, IN WHOLE OR IN PART, FOR ANY PURPOSE BY ANY PERSON WITHOUT THE WRITTEN APPROVAL OF THALES e-TRANSACTIONS INC. E-TRANSACTIONS, INC. Revision 1.0 4.4 ARTEMA DataTAC Installation Manual The printer will work only if the casing is closed. Switch on the terminal, by pressing the "OK" key, and draw an inch of paper to check that the roll is correctly placed in its casing. Tear off the excess paper by pulling the paper towards the front of the terminal. Connecting to the power supply Plug the base power cord into a wall outlet (115V), and verify that the green indicator light on the base is lit. The outlet needs to be close to the terminal and within reach, in order to be quickly disconnected, if necessary. 4.5 Charging The ARTEMA Before using Artema for the first time, leave the handset on the base and let it charge for 8 hours in order to fully charge the battery pack. After a charging cycle, an icon on the terminal indicates the battery charge level In order for you to run a large number of transactions without the base We recommend that you change battery packs every two years. Use only Thales certified battery packs. THIS INFORMATION IS PROPRIETARY INFORMATION OF THALES e-TRANSACTIONS AND MAY NOT BE USED, COPIED, DISCLOSED OR DIVULGED, IN WHOLE OR IN PART, FOR ANY PURPOSE BY ANY PERSON WITHOUT THE WRITTEN APPROVAL OF THALES e-TRANSACTIONS INC. E-TRANSACTIONS, INC. Revision 1.0 ARTEMA DataTAC Installation Manual 5 TROUBLE SHOOTING & SPARE SPARTS Technical maintenance operations should only be done by approved servicing centers. However some problems can easily be solved: Artema stops during display or printing: Recharge the battery by placing the handset on the base for several hours. Check that the battery is correctly inserted into the handset. Check that the paper cover is completely closed. The paper roll gets jammed: Check that the paper roll is positioned correctly. Check that the paper cover is completely closed. Spare parts To obtain extra batteries and paper rolls, contact Thales e-Transactions (toll free) at (888) 710-0100. THIS INFORMATION IS PROPRIETARY INFORMATION OF THALES e-TRANSACTIONS AND MAY NOT BE USED, COPIED, DISCLOSED OR DIVULGED, IN WHOLE OR IN PART, FOR ANY PURPOSE BY ANY PERSON WITHOUT THE WRITTEN APPROVAL OF THALES e-TRANSACTIONS INC. E-TRANSACTIONS, INC. Revision 1.0 ARTEMA DataTAC Installation Manual 10 6 TECHNICAL SPECIFICATIONS 6.1 Handset specifications Weight Size Printer Display Pin pad Card readers Central Processing Unit Power supply Autonomy 23.9 oz (680 g) 8.57 x 3.2 x 2.3 in (243 x 90 x 65 mm) Thermal printer Liquid Crystal Graphical, Back lit 40 x 132 11 alpha numeric keys, 3 navigation keys, 3 dedicated keys: CLR, CAN, ENT Magnetic stripe card reader ISO2 and ISO3 or ISO2 and ISO1 Optional smart card reader 8 or 16 contacts ISO 7816 smart card readers : 2 or 4 optional SAM modules 32 bits RISC processor, 256 KB RAM 1 MB Flash memory Removable battery pack Charging time: 2 hours for 60% of capacity 8 hours for a full charge Over 80 transactions THIS INFORMATION IS PROPRIETARY INFORMATION OF THALES e-TRANSACTIONS AND MAY NOT BE USED, COPIED, DISCLOSED OR DIVULGED, IN WHOLE OR IN PART, FOR ANY PURPOSE BY ANY PERSON WITHOUT THE WRITTEN APPROVAL OF THALES e-TRANSACTIONS INC. E-TRANSACTIONS, INC. Revision 1.0 ARTEMA DataTAC Installation Manual 11 Notes THIS INFORMATION IS PROPRIETARY INFORMATION OF THALES e-TRANSACTIONS AND MAY NOT BE USED, COPIED, DISCLOSED OR DIVULGED, IN WHOLE OR IN PART, FOR ANY PURPOSE BY ANY PERSON WITHOUT THE WRITTEN APPROVAL OF THALES e-TRANSACTIONS INC. E-TRANSACTIONS, INC.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Creator : Microsoft Word Create Date : 2001:08:22 14:15:05 Title : covers.PDF Author : artb Producer : Acrobat PDFWriter 4.0 for Windows Modify Date : 2001:08:24 15:44:30-04:00 Page Count : 13EXIF Metadata provided by EXIF.tools