| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3447431 |
| Application ID | jweNoQvhW0DRtZXtqV/4jA== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 58.64kB (732961 bits) |
| Date Submitted | 2017-07-01 00:00:00 |
| Date Available | 2017-07-01 00:00:00 |
| Creation Date | 2017-05-26 05:42:23 |
| Producing Software | Mac OS X 10.12.6 Quartz PDFContext |
| Document Lastmod | 2017-06-26 17:40:56 |
| Document Title | User manual |
| Document Creator | Word |
| Document Author: | Andrew Wigney |
Wireless Inspection Camera
and LCD Display
Instruction Manual
Model: FERRET CF2810C
Version 3.0
© 2017
Cable Ferret, Inc.
The Cable Ferret Company Limited
The Cable Ferret Company Pty Ltd
www.cableferret.com
Made in China
Caution:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
RF Exposure
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
General Information
Your FERRET CF2810C is an IP67 rated compact wireless
rechargeable inspection camera and palm sized rechargeable
4.3” LCD display designed to help you see in dark confined
spaces.
The Cable Ferret Company’s commitment to ongoing product and
quality improvement means that the specifications are subject to
change without notice.
Don’t get lost in the dark
Use a FERRET
We’ll help you find your way
Camera Unit
CFC2810C
The on/off switch and USB
charging socket are located at
the back of the camera under the screw-on aluminium cap.
To maintain the camera’s IP67 rating, the camera must not be
disassembled. There are no user serviceable items inside the
camera and disassembly will void the warranty.
There is a rubber seal on the body of the camera that seals the
on/off switch and USB charge socket. It is important that this seal
remains clean and in good condition.
The IP67 rating is only when the back cap is securely
screwed on and the rubber seal is in good condition.
Refer to www.youtube.com/cableferret for instructions on how
to change the back rubber seal.
Turn On/Off – Slide the switch at the rear of the camera to turn
the camera on or off. When turned on the front LEDs will
illuminate.
Charge – Connect the supplied power supply. While the camera
is charging the red LED at the rear will illuminate. Once fully
charged the red LED at the rear will turn off.
Note: When the camera is screwed on to the push-pull rods and in use,
take care not to twist the rod to far anti-clockwise as this may result in the
camera unscrewing and becoming disconnected from the rod.
Display Unit
CFD2810C
Note: The display is NOT IP67 rated.
Care must be taken in wet
environments.
Turn On/Off – To turn on press the button at the top left of the
display. To turn off press and hold this button for 3 seconds.
Charge – Connect the supplied power supply. While the camera
is charging the red LED near the bottom right of the case will
illuminate. Once fully charged the LED will turn off.
Recording to SD Card – Insert an SD card up between 2GB and
32GB into the underside of the display. It is best practice to
format an SD card before use by pressing the following buttons:
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
Linearized : No
XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format : application/pdf
Creator : Andrew Wigney
Description :
Title :
Create Date : 2017:05:26 05:42:23Z
Creator Tool : Word
Modify Date : 2017:06:26 17:40:56+08:00
Metadata Date : 2017:06:26 17:40:56+08:00
Keywords :
Producer : Mac OS X 10.12.6 Quartz PDFContext
Document ID : uuid:f410c922-7615-4040-a0f5-ee9f8eb49f10
Instance ID : uuid:e32a1338-092f-4528-bfde-a852af4105a7
Page Count : 16
PDF Version : 1.4
Author : Andrew Wigney
Subject :
EXIF Metadata provided by EXIF.tools