The Sapling MOD-24G-1 2.4 GHz FHSS Transceiver User Manual

The Sapling Company, Inc 2.4 GHz FHSS Transceiver

Contents

OEM MANUAL

OEM MANUAL
November 2013
2.433-2.449 GHz Frequency Hopping Transceiver Module
Model: D-CCA-MOD-24G-1
FCC ID: R73MOD-24G-1
REV 2
The Sapling Company, Inc. 215.322.6063 P.
1633 Republic Road 215.322.8498 F.
Huntingdon Valley, PA 19006 www.sapling-inc.com
USA
Page 2 of 7
OEM INTEGRATOR ATTESTATION
a. This module is for OEM installation only.
b. The OEM is responsible for ensuring that the end-user has no manual
instructions to remove or install module.
c. The module is limited to installation in mobile or fixed applications,
according to Part 2.1091(b).
d. Separate approval is required for all other operating configurations,
including portable configurations with respect to Part 2.1093 and different
antenna configurations.
e. This module may only be used with antennas with a maximum gain of 2.15
dBi, including any replacement antennas, to maintain compliance and
satisfying RF exposure compliance.
f. Labeling instructions of finished products must be in accordance with the
requirements outlined in KDB784748 D01 v07, section 8. Page 6/7 last two
paragraphs which include the required instructions; example: “Contains
Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID:
XYZMODEL1” and described herein.
g. The instructions/statements required per Part 15.19 and 15.21must be
included in the host user’s manual (i.e. end product).
Robert A. Bongiorno
Chief Engineer
The Sapling Company
robertb@sapling-inc.com
(215) 322 – 6063 x1114
The Sapling Company, Inc. 215.322.6063 P.
1633 Republic Road 215.322.8498 F.
Huntingdon Valley, PA 19006 www.sapling-inc.com
USA
Page 3 of 7
Introduction
This module is only authorized to be installed in fixed mount installation and may
not be installed in a mobile or portable device.
The MOD-24G-1 RF module is to be used in Sapling Digital Clocks such as the
SBD 3000 Series Clocks and equivalent models.
The module is only be connected to and installed in other Sapling products.
Specifications
The PCB antenna gain is +3.3Db maximum.
The maximum output power will be 18 dBm.
The transmit cycle is a sequence of 80 data strings on 76 different frequencies,
each transmitted for 3 msec.
Every transmit cycle is 240 msec in duration (80 x 3ms).
The frequency hopping pattern is proprietary to Sapling and covers the range from
2.433 to 2.449 GHz.
Connections
The picture shows the MOD-24G-1 RF module and connector.
MOD-24G-1
J2 RF MODULE INTERFACE
PIN 1*
RF V+
PIN 2
RF SEL
PIN 3
RF CS
PIN 4
PAEN
PIN 5
GPO 0
PIN 6
EN
PIN 7
RF GPO 2
PIN 8
HGM
PIN 9
RF SO
PIN 10
RF GND
PIN 11
RF CLK
PIN 12
RF GND
PIN 13
RF SI
PIN 14
RF GND
* PIN 1 IS THE SQUARE PAD.
J2 RF MODULE
INTERFACE
FCC ID: R73MOD-24G-1
The Sapling Company, Inc. 215.322.6063 P.
1633 Republic Road 215.322.8498 F.
Huntingdon Valley, PA 19006 www.sapling-inc.com
USA
Page 4 of 7
Installed
The picture below shows the MOD-24G-1 RF module installed in a digital clock.
It shows the SBL-G3S-256-1R, the connectors to the rest of the Sapling Wireless
Clock System, and the FCC ID, and the Compliance Label.
SBL-G3S-256-1R
Antenna(s)
The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 5.78 cm from all persons and must not be co-located or
operating in conjunction with any other antenna or transmitter.
J2 RF MODULE
INTERFACE
The Sapling Company, Inc. 215.322.6063 P.
1633 Republic Road 215.322.8498 F.
Huntingdon Valley, PA 19006 www.sapling-inc.com
USA
Page 5 of 7
SBL-G3S-256-1R
MOD-24G-1
J2 RF MODULE
INTERFACE
POWER & DATA
J2 RF MODULE INTERFACE
PIN 1*
RF V+
PIN 2
RF SEL
PIN 3
RF CS
PIN 4
PAEN
PIN 5
GPO 0
PIN 6
EN
PIN 7
RF GPO 2
PIN 8
HGM
PIN 9
RF SO
PIN 10
RF GND
PIN 11
RF CLK
PIN 12
RF GND
PIN 13
RF SI
PIN 14
RF GND
* PIN 1 IS THE SQUARE PAD.
FCC ID: R73MOD-24G-1
The Sapling Company, Inc. 215.322.6063 P.
1633 Republic Road 215.322.8498 F.
Huntingdon Valley, PA 19006 www.sapling-inc.com
USA
Page 6 of 7
SBL-G3S-256-1R Label
The label below is an example of the FCC ID and the Compliance Label.
Operation
The MOD-24G-1 RF module will transmit the time for 240 ms and receive the
time for up to 20 seconds once a minute.
The Sapling Company, Inc. 215.322.6063 P.
1633 Republic Road 215.322.8498 F.
Huntingdon Valley, PA 19006 www.sapling-inc.com
USA
Page 7 of 7
FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO
OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS
TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
“Changes Or Modifications Not Expressly Approved By The Party
Responsible For Compliance Could Void The User's Authority To Operate
The Equipment.”
The Sapling Company, Inc. 215.322.6063 P.
1633 Republic Road 215.322.8498 F.
Huntingdon Valley, PA 19006 www.sapling-inc.com
USA

Navigation menu