The Singing Machine SDL9040 PROFESSIONAL HD KARAOKE SYSTEM WITH BLUETOOTH User Manual
The Singing Machine Company, Inc. PROFESSIONAL HD KARAOKE SYSTEM WITH BLUETOOTH
Contents
- 1. user manual I
- 2. user manual II
user manual I
SDL9040
FIESTA VOICE
INSTRUCTION MANUAL
www.singingmachine.com
The Singing Machine® is a registered trademark of The Singing Machine Co.,Inc.
— E1 —
Warnings
Important Safety Information
1. Read these Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all Instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in
accordance with the Manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety. When the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with a cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
14. Refer all servicing to qualified service
personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
15. WARNING: To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture. Do not place objects
filled with water, such as a vase, on the apparatus.
16. The AC mains plug is used as the power disconnect device
and it should remain readily accessible and operable during
intended use. In order to completely disconnect the apparatus
from power, the mains plug should be completely removed
from the AC outlet socket.
17. CAUTION: To reduce the risk of fire or explosion, do not expose
batteries to excessive heat such as sunshine, fire or other
heat sources.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
The Caution marking is located on the bottom panel.
DANGEROUS VOLTAGE: The lightning flash with arrowhead
symbol within an equilateral triangle is intended to alert the
user to the presence of uninsulated dangerous voltage within
the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
ATTENTION: The exclamation point within an equilateral
triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions
in the literature accompanying this product.
FCC WARNING: This equipment may generate or use radio frequency
energy. Changes or modifications to this equipment may cause harmful
interference unless the modifications are expressly approved in the
instruction manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The rating information is located at the rear of the unit.
INDUSTRY CANADA NOTICE:
This device complies with Industry Canada license-exempt RSS standard( s).
Operation is subject to the following two conditions: (1) This device may
not cause interference, and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
This equipment should be installed and operated with a minumum distance
of 20 cm between the radiator and your body.
DRIPPING WARNING: This product shall not be exposed to dripping or
splashing, and no objects filled with liquids, such as vases, shall be placed
on the product.
VENTILATION WARNING: The normal ventilation of the product shall not be
impeded for intended use.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables
aux appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectriqu subi,
même si le brouillage est susceptible d’encompromettre le fonctionnement.
Cet équipement doit être installé et utilisé à une distance minimale de 20 cm
entre le radiateur et votre corps.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT AND FULLY INSERT.
CAN ICES-3(B)/NMB-3(B)
— E2 —
Included
Please make sure the following items are included.
Main Unit
Singing Machine Flash Drive
AC Adapter
Manual
Wired Interactive Microphone
Wired Microphone
— E3 —
Location of Controls (Top/Front)
1. Disco Ball
2. TFT LCD Color Screen
3. VOCAL/PAIR Button
4. FUNCTION (Monitor ON/OFF) Button
5. MENU Button
6. RECORD Button
7. DISCO BALL Button
8. ON/OFF Button
9. MIC Holder
10. EXTERNAL INPUT VOLUME Control
11. MIC 1 VOLUME Control
12. EXTERNAL INPUT Jack
13. Tweeter
14. LINE IN Jack
15. Bluetooth Indicator
16. MASTER VOLUME Control
17. Navigation LEFT Button
18. Navigation UP Button
19. Navigation RIGHT Button
20. Navigation DOWN Button
21. Remote Sensor
22. ENTER/ Button
23. LIGHT MODE Button
24. VOICE EFFECTS Control
25. MIC 2 VOLUME Control
26. MIC 2 Jack
27. MIC 1 Jack
28. USB Slot
29. Speaker/Lights
u
x
V
al
v
y
at
W
am am
w
U
ak
XX
an
aq
bt
bm
br
ao
ar
bk
bp
bn
bs
ap
as
bl
bq
bo
— E4 —
Location of Controls (Rear)
1. Adjustable Handle
2. DC IN Jack
3. Wheels
4. Handle Release
5. HDMI Jack
u
x
y
v
w
— E5 —
1. Mic ON/OFF Switch
2. MENU Button
3. Navigation Buttons
4. ENTER/ Button
5. Remote Transmitter (Rear)
6. Battery Compartment (Rear)
Location of Controls (Playback Display)
Master Volume: 0-20
Record Status
Battery
Status
Lead Vocal Status
Current
Playlist
Song
Elapsed Time
Song
Total Time
Song Title
Playback Status
Location of Controls (Microphones)
Interactive Microphone
Standard Microphone
u
vwx
u
y U
— E6 —
Connection
Connecting the Microphone(s)
Microphones:
Connect a microphone into Mic jack 1
u
and the other microphone into Mic jack
2
v
(if desired).
Note: Do not drop or tap the Mic as
damage to the Mic or speakers may occur.
Do not twirl the microphone by cord as it
will cause damage to the encased wiring.
Connecting the Unit to a TV
HDMI
Cable
Rear of External TV
HDMI Jack (Out) HDMI Jack (In)
HDMI IN 1
2
The video and lyrics will be displayed
on the built-in screen. You may also
want to connect a TV to display a
larger image and additional sound;
follow the steps below:
Plug the HDMI cable (Not included)
into the HDMI Jack on the back of
the unit. Plug the other end of the
HDMI cable into the HDMI input on
your TV.
Notes:
• This unit can be used with or
without a TV.
• Also refer to the TV’s or external
unit’s User Guide.
u
v
— E7 —
Connection
Connecting to AC Power
Changing the Interactive Microphone’s Battery
1
Insert the AC power cord
into a conveniently located
AC outlet having 120V,
60Hz.
Note:
Make all connections before
connecting to AC power.
When performance suffers,
change the batteries as follows:
1
Unscrew the Battery
Compartment screw and
remove the door.
2
Replace battery with
CR2032 button cell battery.
3
Replace Battery
Compartment and screw.
CR2032
BATTERY PRECAUTIONS:
Follow these precautions when using batteries in this device:
1. Warning – Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type.
2. Use only the size and type of batteries specified.
3. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment.
A reversed battery may cause damage to the device.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury
from possible battery leakage.
5. Do not try to recharge a battery not intended to be recharged; it can overheat and rupture. (Follow battery
manufacturer’s directions.)
6. Remove batteries promptly if consumed.
— E8 —
Rechargeable Battery
This unit comes with a built-in rechargeable battery pack that will allow the unit to be used
without being connected to AC power. The Battery indicator (top right of the display) will
show the battery charge left indicated by the amount of bars. The rechargeable battery
pack must NOT to be replaced by the user.
To optimize the battery life, we recommend to charge the unit once a month. When the
battery icon turns red and flashing, recharge the unit by following the steps below:
1
Insert the AC power cord into
a conveniently located AC
outlet having 120V, 60Hz.
2 Allow the unit to charge for
approximately twelve hours
for a full charge.
3 Disconnect the AC cord and
the fully charged unit can
be used for approximately
five hours depending on the
function chosen.
Attention: The sound volume will adjust automatically when the battery is not full.
Recycling and Disposal Information:
• Do not dispose of electronic devices or any of their components.
(especially batteries and LCD displays) in your municipal trash collection.
• Consult your local waste management authority or a recycling organization like Earth911.
com to find an electronics recycling facility in your area.
CAUTION: Rechargeable batteries must be recycled or disposed of properly.
Lead Acid Battery Warning
• This equipment contains a rechargeable valve-regulated lead acid battery.
• Do not charge the battery in temperatures below 32° F (0° C) or higher than 122° F
(50° C).
• Do not open or mutilate the battery.
• The rechargeable batteries contained in this equipment may explode if disposed of in a
fire.
• Do not short-circuit the battery.
• Do not charge the rechargeable battery pack used in this equipment with any charger
other than the one designed to charge this battery pack, as specified in the owner’s
manual. Using another charger may damage the battery pack or cause the battery pack to
explode.
— E9 —
Singing Machine USB Flash Drive
Inserting the USB Flash Drive
Included with the system is a
Singing Machine USB Flash
Drive, which is used for storing
Karaoke songs as well as
recordings from this unit.
There are two songs included on
the Singing Machine USB Flash
Drive, but you can access the
Karaoke Store for many more
songs. Just follow the Welcome
Kit Instructions!
Before you insert the Singing
Machine USB Flash Drive, make
sure to remove it from its stand
which will reveal the USB plug.
Insert it into the USB slot on the
unit with the face towards the
top of the unit.
— E10 —
The Karaoke Store application can be installed on Microsoft Windows computers running
Vista, Windows 7, and Windows 8 or higher. The Karaoke Store application requires
connection to the Internet (a high-speed connection is recommended).
Karaoke Store
PC Installation
1 Insert the Singing Machine USB
Flash Drive into a powered USB
slot on your computer.
2 Double-click the file named,
“Karaoke_Store_Win_Setup”.
3 Follow the online instructions to install the
software on your computer.
4 After installing, open your Program’s folder
and open the Karaoke Store folder.
5 Double-click “Karaoke Store”
to open the software.
6 On this page you can now sign
up and purchase/download
them to your computer and/or
USB drive for playing on your
new Singing Machine!
— E11 —
1 Insert the Singing Machine USB
Flash Drive into a powered USB
slot on your computer.
2 Double-click the file named,
“Karaoke_Store_Mac_Setup.pkg”.
3 Follow the online instructions
to install the software on your
computer.
4 After installing, open your
Application’s folder and open the
Stingray Karaoke Store folder.
5 Double-click Karaoke Store
App to open the software.
6 On this page you can now sign
up and purchase/download
them to your computer and/or
USB drive for playing on your
new Singing Machine!
The Karaoke Store application can be installed on Apple Macintosh computers running OS X
10.8 and higher. The Karaoke Store application requires connection to the Internet (a high-
speed connection is recommended).
Karaoke Store
Mac Installation
— E12 —
It is very important to point the remote’s sensor at the unit’s remote sensor (see
illustration).
This Microphone Remote’s buttons will operate the same way as the main unit’s ENTER,
Navigation and MENU buttons. When a step says to press one of these buttons, you can
use either the unit or the Microphone Remote.
To turn the Microphone On, slide the ON/OFF switch u to the ON position.
The Microphone is also a remote control that can be used to control the unit. See below for
instructions on using the Microphone Remote.
Operation
Microphone Remote Operation
u
— E13 —
Operation
Light Mode
Power Save Mode
Carrying Handle
1 There are four Light modes.
Repeatedly press the LIGHT MODE
button to select a mode as follows:
Light Modes 1: The unit will synchronize
to the music being played.
Light Mode 2: The unit will light up with
random colors and patterns.
Light Mode 3: The light effects will be
turned off.
2 This unit also comes with a Disco
Ball feature. Press the DISCO BALL
button to turn the lights on and they
will illuminate onto the ceiling.
To save the battery power of the
unit when you are outdoor, the TFT
screen will turn off after 30 seconds
of no action. The sound volume level
will also adjust automatically with the
rechargeable battery level.
You can also press and hold the
FUNCTION button u to turn off the TFT
screen whenever you want.
To extend the Adjustable Handle, simply
press the Handle Release v and extend
the Adjustable Handle as desired.
To slide the Adjustable Handle back, press
the Handle Release again and slide it
downward.
u
v
v u
— E14 —
Operation
Voice Effects
Rotate the VOICE EFFECTS control u to
select ECHO, FEMALE, MALE, CHIPMUNK,
ROBOT or RADIO to transform a singer’s
voice. TFT screen will show:
When no voice effect is selected.
OFF
Note: Voice Effects selections will appear
on bottom left corner of screen if VOICE
EFFECTS knob is turned while video is
playing.
u
Female
Voice
Male
Voice
Radio
Robot
Chipmunk
Echo
Echo
Female
Voice
Male
Voice
Radio
Robot
Chipmunk
Echo
Male
Voice
Radio
Robot
Chipmunk
Female
Voice
Echo
Female
Voice
Male
Voice
Radio
Robot
Chipmunk
Echo
Female
Voice
Male
Voice
Radio
Robot
Chipmunk
Echo
Female
Voice
Male
Voice
Radio
Robot
Chipmunk
OFF
Turning the TFT Monitor Off
1 To turn the built-in TFT monitor Off;
press and hold the FUNCTION button
until the built in TFT monitor turns
off. Repeat the same step to turn the
built-in TFT monitor ON.
u
— E15 —
Operation
Playing Songs from the USB
1 Connect the unit as described
previously. Press the ON/OFF button
to turn the unit on.
2
Remove the provided Singing
Machine flash drive
from its stand to
reveal the USB plug.
Insert it into the USB
slot on the unit so it faces upward.
Note: The Singing Machine flash drive
has an 8 GB capacity (the actual capacity
may vary slightly).
3
The USB mode will be selected by
default; press the ENTER button
to enter the USB mode. You can also
repeatedly press the FUNCTION
button to select the USB mode.
Notes:
• The USB mode cannot be accessed
until a flash drive is inserted.
• A loading icon will appear on
the external screen when the system is
loading the songs.
uv
w
— E16 —
Operation
Playing Songs from the USB (Continued)
4 Use the Navigation Up and
Down buttons to navigate through
the list of songs that you have
previously downloaded on your USB.
5
Press the ENTER button to start
the playback. The HD karaoke video
will play on the screen. Press the
ENTER button during playback
to pause the song. Press the MENU
button to stop the playback and go
back to the USB menu.
Notes:
• If connected to a TV, there will be no
display on the built-in monitor.
• If connected to a TV, you can also
control the volume with the TV’s
volume control.
6
Adjust the volume to a comfortable
level using the MASTER VOLUME
control.
7
Connect the microphone(s). Slide the
Remote/Mic’s ON/OFF switch to the
ON position.
8
Adjust the MIC VOLUME 1 or 2
control as desired. Increasing this will
increase the volume of the respective
microphone.
x
y
U
W
V
— E17 —
Operation
Playing Songs from the USB (Continued)
9 VOCALS: To sing with the lead
singer on the recording, press
the VOCAL/PAIR button; “ ”
will appear at the top right of the
monitor. To listen to music only,
press the VOCAL/PAIR button
again; “ ” will appear over the
Lead Vocal Status icon.
Note: The song must be recorded with
separate vocals that is downloaded (aka
multiplex recording) in order to utilize the
Lead Vocal function.
10
SKIP: Advance or go backone
track by pressing the
NavigationRight or Left
button.
11 TO ADVANCE ON THE TRACK:
During playback, press and
hold the NavigationRight or
Left button to move forward
or backward. When you release
the button, normal playback will
resume.
at
ak
X
— E18 —
Operation
Playing Songs from the USB (Continued)
12 RECORDING YOUR SINGING:
To record your singing as well as
the music, press the RECORD
button; recording will begin and
the record icon at the top right
corner of the monitor will blink
red.
When done recording, press
the RECORD button again; the
Record icon will stop blinking red.
Notes:
• The recorded audio file will record onto
the USB drive.
• The recorded audio file will be named
starting with the Karaoke song title.
• See “Playing Songs from the Recorded
Files” to play back your recorded files.
13 SEARCHING BY ARTIST
OR TITLE: While in the USB
menu, select Search using
the NavigationLeft and
Right buttons, then press
the ENTER button. The
alphabet will appear at the
bottom of the screen. Select the
desired starting letter using the
MASTER VOLUME control, then
press the ENTER button
to select it. A list of songs that
meet the criteria will appear.
Use the Navigation Up and
Down buttons to navigate
through the list of songs, then
press the ENTER button to
play your selection, or select the
next letter the same way.
Note:
You can search up to six letters; after the
sixth letter the search will reset.
am
al
— E19 —
Operation
Playing Songs from the USB (Continued)
14 SEARCHING BY GENRE, ARTIST
or TITLE: To filter by Genre, Artist
or Title, select the Genre, Artist, or
Title using the NavigationLeft
andRight buttons, then press the
ENTER button. The alphabet
will appear at the bottom of the
screen; select the desired starting
letter using the MASTER VOLUME
control, then press the ENTER
button to select it. A list of songs
that meet the criteria will appear.
Use the Navigation Up and
Down buttons to navigate through
the list of songs, then press the
ENTER button to play your
selection, or select the next letter
the same way.
Note:
You can search up to six letters. After the
sixth letter the search will reset.
15 CREATING THE PLAYLIST: To
create a personalized playlist,
select a song using the Navigation
Up and Down buttons, then
scroll to the Playlist column (Add)
using the NavigationRight or
Left button. Press the ENTER
button to confirm the operation;
“Added” will appear. Repeat this
step to add more songs.
Notes:
• The personalized Playlist will be kept even
if the unit is turned on or off.
• You can always edit your Playlist after
you create it by selecting a song that
was added and pressing the ENTER
button again; “Added” will change to
“Add”.
Add Added